| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA Campaign Number: 18V359
Manufacturer PACCAR
Incorporated
Components POWER TRAIN
Potential Number of Units Affected 36
Rear Hub Axle Nut may be Over Tightened
Bearing failure can cause wheel separation, increasing the risk of crash.
Summary
PACCAR Incorporated (PACCAR) is recalling certain 2019 Kenworth T270 and T370 vehicles. The rear hub axle nut on these vehicles may have been over tightened, possibly causing bearing failure or a fire.
Remedy
PACCAR will notify owners, and dealers will disassemble the rear hub assembly, and install new bearings and re-assemble the hub, free of charge. The recall is expected to begin June 29, 2018. Owners may contact PACCAR customer service at 1-918-259-3258. PACCAR’s number for this recall is 18KWC.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Safety Bulletin
No. 1B18KWC
6/25/2018
Loading...
Reload document 
Open in new tab
Recall Acknowledgement
June 26, 2018
Loading...
Bestseller No. 1
Lucas Oil 10046 SAE 80W-90 Heavy Duty Gear Oil - 1 Gallon
- Contains extraordinary anti-wear and lubricity agents, ensuring exceptional protection against wear and reducing drag
- Helps to control heat
- Incorporates Lucas cutting-edge additive technology derived from top-rated Lucas Heavy Duty Oil Stabilizer, the number one supplemental oil in the heavy-duty industry
- Available in 1 quart and 1 gallon bottle sizes
Bestseller No. 2
Valvoline High Performance SAE 80W-90 Gear Oil 1 QT
- Protects Against Severe Temperatures To Help Extend Service Life
- Formulated With Extreme-Pressure Additives To Minimize Gear Wear From Shock Loads
- Helps Protect Against Gear Wear From Scuffing, Scouring, Corrosion And Pitting
- Recommended For Conventional Hypoid Differentials And Non-Synchronized Manual Transmissions In Passenger Cars, Light Trucks, Sport Utility Vehicles, Vans And Heavy-Duty Trucks Where An Api-Gl5 Or Gl-4 Fluid Is Specified
Bestseller No. 3
Lucas Oil 10043 SAE 80W-90 Heavy Duty Gear Oil - 1 Quart
- Contains extraordinary anti-wear and lubricity agents, ensuring exceptional protection against wear and reducing drag
- Helps to control heat
- Incorporates Lucas cutting-edge additive technology derived from top-rated Lucas Heavy Duty Oil Stabilizer, the number one supplemental oil in the heavy-duty industry
- Available in 1 quart and 1 gallon bottle sizes
SaleBestseller No. 4
Valvoline FlexFill Full Synthetic SAE 75W-90 Gear Oil 1 QT Pouch
- Works in tight spaces and makes gear oil easier to use.Fit Type: Universal
- Full Synthetic formula for exceptional high and low temperature protection
- Contains an extreme pressure additive for better load carrying capacity and wear protection
- Excellent thermal stability designed to protect oil from high temperature breakdown
- Formulated for ultimate gear protection and performance
Bestseller No. 6
Triax Gear Premium LS 80W-90, GL-5 Limited Slip Ready, Manual Transmissions, Hypoid Gear Systems, Differentials, NATO Military Approved, Widest OEM Specification Range (1 Gallon)
- WIDEST SPEC RANGE ON THE MARKET: widely compatible with a very large number of hypoid gear systems, differentials, transmissions and axle assemblies.
- SEVERE SERVICE MAX: Exceptional shear stability and oxidation resistance. Polyphosphate EP proprietary additive system offers substantial improvement in performance over previous generation, low cost, gear oils
- BUILT IN LIMTED SLIP ADDITIVE - Does not require "additional" LS additive. Its built into the product, optimized for all limited slip differentials, including those with built in wet brakes.
- OUTSTANDING SCUFFING PROTECTION - Superb gear and syncron protection, facilitating extremely long transmission life. Exceeds Load Stage 13 extreme pressure requirements beyond 120,000 lbs / sqi.
- SHEAR STABLE - Excellent thermal stability and high load capacity without viscosity breakdown, facilitates excellent film strength under high loads, high temp and high shear conditions.
SaleBestseller No. 7
Quicksilver by Mercury Marine 80W-90 Premium Gear Lube, Marine Engine, 32 oz.
- Direct replacement for Mercury Marine 858058K01
- Provides maximum protection against excessive wear, corrosion and pitting for extended gear life in marine applications
- Contains additives to protect gears if water enters the gear case or lower unit
- Recommended for use in outboard motor gear cases and marine lower units in applications below 75hp
- 80W-90 viscosity
SaleBestseller No. 9
Valvoline Gear Oil, Differential, 80W90, Conventional, 1 qt Bottle, Each
- Product Type :Auto Accessory
- Package Dimensions :8.89 Cm L X10.922 Cm W X30.48 Cm H
- Country Of Origin :United States
- Package Weight :2.0Lbs
Bestseller No. 10
ULTRA 1PLUS SAE 80W-90 Gear Oil - Heavy Duty API GL-5 Gear Oil 80W90-1 Gallon
- EXTREME-PRESSURE PERFORMANCE: U1P-Gear 80W90 Gear Oil, API GL-5, defends against high-speed, low-speed, and high-torque conditions, minimising wear from shock loads with superior anti-scuffing additives.
- TEMPERATURE RESILIENCE: With exceptional thermal stability, our 80W-90 differential fluid safeguards against severe temperatures, ensuring longevity and cleanliness for extended service life.
- PRECISION WEAR PROTECTION: Formulated with anti-wear additives, this API GL5 gear oil shields gear teeth from pitting, spalling, and scouring, offering advanced protection against scuffing, corrosion, and chattering.
- VERSATILE APPLICATION: Recommended for conventional hypoid differentials and manual transmissions, this product is ideal for passenger cars, trucks, SUVs, and vans, meeting API GL5 / GL4 gear oil specifications.
- SHEAR STABILITY AND ANTI-CORROSION: The shear-stable formulation resists rust, oxidation, foaming, and varnish, guaranteeing reliable performance and corrosion protection in diverse driving conditions.
Last update on 2025-04-16 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.