โThis site contains affiliate links for which OEMDTC may be compensatedโ |
July 14, 2022 NHTSA CAMPAIGN NUMBER: 22V506000
Improperly Grounded Air Compressor Housing
An improperly grounded air compressor can cause electric shock, increasing the risk of injury.
NHTSA Campaign Number: 22V506
Manufacturer Blue Bird Body Company
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 1
Summary
Blue Bird Body Company (Blue Bird) is recalling one 2022 All American transit bus equipped with a Cummins PD7000 Electric Drivetrain containing an electric air compressor. The air compressor housing is improperly grounded, causing electrical voltage greater than 50V AC during operation.
Remedy
Dealers will install an electrical ground strap between the compressor motor housing and vehicle chassis, free of charge. The interim owner notification letter was mailed on September 1, 2022. Remedy parts are expected to become available mid-February 2023. Owners may contact Blue Bird’s customer service at 1-478-822-2242. Blue Bird’s number for this recall is R22BY-NSB.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Campaign Number: C2619
BES PD7000 Air Compressor Grounding Safety Campaign
Chronology :
April 21, 2022: A Cummins employee experienced a mild electric shock, when he touched the air compressor motor housing at a Cummins
facility.
April 21 through May 11, 2022: Cummins conducted an investigation to understand the cause of the issue.
During the investigation, the voltage between the air compressor housing and vehicle chassis for the incident unit was measured as 110 V to 130V AC. Testing was conducted on the two configurations of air compressor and inverter assemblies to understand the ground paths and to verify the missing ground.
May 11 through June 1, 2022: A Cummins Product Safety Hazard Analysis was conducted. Testing was completed on the current production air compressor to confirm that it does not have this condition.
June 1 through June 28, 2022: Cummins escalated the issue through its Product Safety Defect Determination process.
June 28, 2022: Based upon the results of the investigation, the Cummins Product Safety Defect Board decided to conduct a safety campaign to address this condition. To date, there have been no reports of electrical shock (other than the Cummins
employee on April 21, 2022 or injuries due to this condition.
July 12, 2022: Blue Bird Corporation was notified by Cummins of the Air Compressor Safety Recall Campaign.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
BLUE BIRD | ALL AMERICAN | 2022 |
7 Associated Documents
Defect Notice 573 Report
RCLRPT-22V506-3421.PDF 214.382KB
Recall Acknowledgement
RCAK-22V506-6720.pdf 645.829KB
ISSUED Interim Owner Notification Letter(Part 577)
RIONL-22V506-8117.pdf 93.958KB
Recall 573 Report – 1/23/23
RCLRPT-22V506-7771.PDF 214.498KB
Remedy Instructions and TSB
RCRIT-22V506-5489.pdf 2171.291KB
ISSUED Owner Notification Letter(Part 577)
RCONL-22V506-6034.pdf 99.162KB
Recall Quarterly Report #1, 2023-1
RCLQRT-22V506-6157.PDF 211.14KB
Latest Recalls Documents
- Charge with Confidence: ChargePoint builds reliable, flexible EV charging stations for home, business, and fleets. Get 24/7 support and access to hundreds of thousands of North American charging locations.
- Charge Smart: With the user-friendly ChargePoint Mobile App, you can control your electric car charger, manage reminders, connect to smart home devices, find stations, get data and charging info, and access the latest features.
- Vast Network: Wherever you go, ChargePointโs network includes 274k+ stations across North America and Europe and 565k+ roaming partner stations.
- Safe & Durable: Rely on this UL-certified EV charger for safe home charging. It can be installed indoors or outdoors by an electrician and includes a cold-resistant cable.
- Fast & Powerful: This EV charger charges up to 9 times faster than a 110V outlet, delivering 37 mi/hr. It features a J1772 connector for all non-Tesla
EVs and requires a 20A or 80A circuit. For Tesla
EVs, this will require an adapter.
- COMPATIBILITY: Wall Connector is compatible with all Tesla
models: Model S, Model 3, Model X and Model Y.
- CHARGING SPEED: Up to 44 miles of range per hour of charge, with up to 11.5 kW / 48 amp output, depending on Tesla
model and breaker size.
- CONVENIENCE: Indoor or outdoor installation with variable amperage that allows max output to be customized to an existing power supply and supports any output up to 48A. Possible max output configurations include: 48A, 40A, 32A, 24A, 16A, 12A.
- CONNECTIVITY: Connecting the Wall Connector to a local Wi-Fi network enables over-the-air firmware updates for continual product improvements and remote access control.
- POWER-SHARE: Power-share is ideal for locations that need to charge more than one Tesla
at the same time. This functionality allows up to six Wall Connectors to be linked for efficient power management.
- Flex Level 1 EV Charger - The EVDANCE Level 1 electric car charger is compatible with J1772 electric vehicles and plug-in hybrid
vehicles (North American Standard). *Tesla
requires a SAE J1772 adapter.
- Convenient to Use - This charger has both NEMA 6-20 plug for 16A 240V charging (3.68kW, 10-12 mi/h) and a NEMA 6-20 to 5-15 plug adapter for 12A 120V charging (1.44kW, 2-5 mi/h). The included bag makes it easier to carry on the go. It also has a 25ft cable length, you can use it flexibly from anywhere in the garage or driveway.
- Indication Displays - LED display that can tell you the status as well as indicate errors while charging your electric vehicle.
- Durable and Safe - This electric car charger is made of high-grade rugged materials, FCC and CE certified. The intelligent chip design of its control box can keep monitoring the charging status at any time, and the protection level of the housing is IP66 and the fire rating is UL 94 V-0.
- Contact Us Anytime - This electric vehicle charger has a 1-year warranty, if you feel that the product doesn't meet your expectations, please feel free to contact us and we will solve the problem.
- โค [Question & Answer: Why can't find the device on app? or Can't find the device after changing phones]: Solutions: 1. Confirm your phone to connect with the 2.4Ghz wifi, not connect the wifi whose name has 5G suffix; 2. Turn on the wifi and bluetooth of the phone; 3. Factory Reset/Wifi reset: Pull out the charging gun, simultaneously long press the โถ button and time button on the product screen until it shows "Factory Reset/Wifi reset". 4. Re-start and add your device.
- โค [NO Need to Install the Additional GFCI Breaker & Why No Power When Using the Nema 5-15p to 14-50R Adapter]: Built-in CCID20 leakage detection and protection device, it is no need to install additional GFCI breaker for NEMA 14-50 receptacles. [Kindly Note When Using the 5-15P Adapter]: 1. Please confirm whether the Adapter cable is used for EVs before choosing the adapter cable. 2. The EV Chargers have a different wiring sequence than RVs even though they are the same adapter, so that causes the adapter you bought to not work.
- โค [6X Faster with ETL, FCC and CE Listed, Meets the Safety Criteria Defined by: SAE J1772, UL2231-1/-2, UL 991, UL 2231, UL 2251, UL1998 and UL 2594 & Compatible with all EVs and PHEVs Sold in North America]: Say goodbye to slow level 1 ev charger and enjoy 6X faster charging. Designed with J1772 TYPE 1 standard connector, compatible with Tesla
(Adaptor Needed), Ford
, GM, Nissan
, Audi
, Kia
, Honda
, BMW
, Kia
, Hyundai
, Gmc
, Chevy, etc.
- โค [Smart WIFI APP, You can Set the Charging Period]: Check the charging cost, history, fully-charged notification, track the charging status, during off-peak period. โค [Wi-Fi Reset/Factory Reset Function, Add New Device Quickly]: If you can't find your device or you have replaced a new phone, just pull out the charging gun, simultaneously long press the โถ button and time adjustment button on the product screen until it shows "Factory Reset", then re-start your device.
- โค [Up to 7.68kWh High Speed Charging & Adjustable Amperage from 16A to 32A by Screen Button or APP]: Maximum current output of 32 Amps for 40A circuit breaker, 24 Amps for 30A circuit breaker, or 16 Amps for 20A circuit breaker (Please pull out the charging gun, long press "A" button to change the current). You can also adjust the current/amperage by APP before the charging.
- J1772 Compatible: This portable EV charger is fully compatible with J1772 standard electric vehicles and plug-in hybrids, such as Nissan
, Honda
, Chevrolet
, Volkswagen
, Mercedes
, Audi
, BMW
, Rivian
, Hyundai
, Kia
, Toyota
, Jeep
, Ford
, GMC
, and many others. **All Tesla
models require SAE J1772 adapter to utilize this charger(Adapter Not Included).
- Level 1&2 EV Charger: Adjustable current settings of 8A, 10A, 13A, and 16A, and comes equipped with both NEMA 6-20 (220V/240V) and NEMA 5-15 (110V/120V) plugs for flexible Level 1 and Level 2 charging options. The charger provides up to 3.84 kW/h (15.36MPH) of power when connected with a 16A current at 240V, or 1.92 kW/h (7.04MPH) with a 16A current at 120V.
- Smart Charging: Schedule your charging sessions during off-peak hours with the 16 Amp EV charger to save on your electricity bill. With a length of up to 25 feet, it provides ample room for maneuverability and convenient charging at home or any available charging station. Additionally, its IP65 waterproof design ensures safety and durability in a range of weather conditions.
- 2.8-inch LED Touch Display: The Screen allows for real-time monitoring of charging current, voltage, and power, making it easy for you to manage your charging status and history. Additionally, you can touch the screen to select different current settings and charging times. In case of any errors, they are swiftly displayed on the LED screen, enabling rapid troubleshooting.
- Safety: Our charger has passed FCC and CE certification and is equipped with built-in over-voltage, over-current, and short-circuit protection. In the event of an overload, the protection mechanism will automatically report errors and power off to ensure top-notch safety.
- 9X FASTER than your portable basic charger: EVIQO electric vehicle charging stations are set as a plug-in level 2 EV charger 40 Amp (9.6 kWh) by default. Plug & Charge, no electrician needed. NEMA 14-50 outlet (up to 50A circuit) required. To make EVIQO a 48Amp EV charger level 2 (11.5 kWh), hardwire electrical installation required (remove input cable and prepare a custom whip, 60A or more circuit required). Adjustable current intensity: 1A increment in EVIQO app + hardware dip switch. US-based customer support Mon-Sat, 8 AM - 4 PM PT.
- SAFE, USA CERTIFIED: EVIQO electric vehicle charging equipment is UL compliant, Energy Star, ETL and FCC certified EV car charger level 2 with 3-year Warranty. EVIQO EV charging station is weatherproof: outdoor EV charger / indoor electric vehicle charger. EVIQO home EV wall charger level 2 meets NEMA 4 and IP66 protection standards.
- SMART APP: EVIQO surveyed 1,800 EV owners to create EV home charger level 2 app. Set up to 3 schedules and save costs during off-peak rates. Get smart tips and reminders, track power/costs live and monitor the charging history. Enjoy sleek intuitive interface of your home EV charger level 2. EVIQO solar EV charger box consistently enhances its firmware with remote OTA updates.
- COMPATIBLE WITH ALL EVs: EVIPOWER NEMA 14-50 EV charger is equipped with heavy duty rubberized SAE J1772 connector compatible with all EVs / PHEVs in NA: all Tesla
models, Chevy Bolt, Chevy Volt, VW ID 4, Nissan
Leaf Charger, Polestar
2, Ford
Mach E Charger, IONIQ 5 / 6, Kia
Nino, EV6, EV9, Mercedes
EQS, Audi
, Rav4, Jeep
4xe Charger (This is J1772 level 2 charger, adapter required for Tesla
).
- FIRST-IN-CLASS: EVIQO level 2 EV chargers offer EXTRA LONG EV charging cable 25' and EXTRA LONG 37" input cable.
- UNIVERSAL COMPATIBILITY: Seamlessly transitions between NACS and J1772 connectors, accommodating all major North American EVs including Tesla
Vehicles
- CHARGING SPEED: Up to 44 miles of range per hour of charge, with up to 11.5 kW / 48 amp output, depending on Tesla
model and breaker size.
- CONVENIENCE: Indoor or outdoor installation (by your own electrician or one of the 1,400+ Tesla
Certified Electricians) with variable amperage that allows max output to be customized to an existing power supply and supports any output up to 48A. Possible max output configurations include: 48A, 40A, 32A, 24A, 16A, 12A.
- CONNECTIVITY: Connecting the Wall Connector to a local Wi-Fi network enables over-the-air firmware updates for continual product improvements and remote access control via the app.
- POWER-SHARE: Power-share is ideal for locations that need to charge more than one Tesla
at the same time. This functionality allows up to six Wall Connectors to be linked for efficient power management.
- LEVEL 1 CHARGING - The Lectron Level 1 Charger lets you quickly charge your EV with a standard 110V outlet; You get 15 amps and 1.65 kW of power for the standard full-charge time for your car, at home or at work
- CONVENIENT OVERNIGHT CHARGING - The Lectron 15 Amp EV Charger is a more affordable and faster charging option compared to other Level 2 EV chargers, delivering an extra 40-50 miles of overnight charge at home โ without breaking the bank
- J1772 COMPATIBILITY - This J1772 charger is compatible with all electric vehicles that use the J1772 standard, including BMW
, Ford
, Honda
, Hyundai
, Kia
, Porsche
, Nissan
, and Chevy
- SAFE AND RELIABLE - FCC and ETL certified (UL2594 standard) for safety with overvoltage, overcurrent, and short circuit protection; Energy Star certified for efficiency; IP65 rated for dust and water resistance
- PORTABLE CONVENIENCE - Whether you're on a road trip or visiting a friend, you can easily plug in your EV and charge with our portable EV charger
- Fast and Efficient Charging---The Seguma level 2 EV charger is equipped with NEMA 6-20 Plug, offers 240V, 16A, 3.84kW output current, approximately 4x faster than 8A level 1 ev chargers, reducing the time required to charge an electric vehicle.
- Level 1+Level 2 EV Charger--- This portable ev charger is equipped with NEMA 6-20 plug (Level 2 circuits, 240V, 16A) and attached a NEMA 5-15 adapter (Level 1 circuits, 120V, 12A), Whether you have access to a standard household outlet or a dedicated EV charging station, our electric car charger adapts to your charging needs.
- Universal Compatibility--- Seguma 16A j1772 Charger is engineered with standardized J1772 connector, works flawlessly with any electric vehicle featuring a j1772 charging port. Whether you drive a Ford
, Kia
, Chevrolet
Bolt, or any other EV model, this evse level 2 charger ensures hassle-free charging every time.
- Intelligent Charging Features---Feature with built-in advanced chipset, Seguma ev charger provides extensive protection against lightning, leakage, grounding issues, over and under voltage, overcharging, excessive current, and overheating. Additionally, the ev level 2 charger automatically shuts off once your vehicle is fully charged, enhancing car safety. Tips: We recommend installing a circuit breaker on your home circuit for added safety measures.
- Extended 25FT Cable Length---With an impressive 25-foot cable, you can conveniently charge your EV at home or using public charging stations. Its internal copper wires ensure top conductivity, while the TPE flame-retardant jacket adds durability. Plus, this ev charging cable is IP66 waterproof and dustproof, enduring temperatures from -30ยฐC to 45ยฐC.
- Up to 9x Faster Charging Speed: The Emporia electric vehicle charger provides up to 46 miles/hour charging speed via hardwired connection (48 amp - up to 9x faster than a standard wall outlet) or up to 38 miles/hour via the NEMA plug (40 amp).
- Versatile Installation Options: Preconfigured for NEMA Type 14-50P compliant with 2017 NEC Section 625.17 for up to 40A or convert to Hardwired for up to 48A. Professional installation recommended for optimal safety and performance.
- Safety, Certification, and Peace of Mind: UL listed and ENERGY STAR certified, meeting stringent standards (NEC 625, SAE J1772, UL 817, UL 991, UL 2231, UL 2251, and UL 2594).
- Get the Benefits of Smart Charging: Connect via 2.4 GHz WiFi to access real-time energy data and manage charging from your mobile device. Schedule charging sessions to optimize utility rates and performance.
- Universal Compatibility: Equipped with a secure SAE J1772 connector, compatible with all EVs in North America, including Tesla
, Chevrolet
Bolt, VW ID 4, Nissan
Leaf, Ford
Mustang
Mach-E, IONIQ 5/6, BMW
i3, i4, iX, Audi
, and Jeep
Wrangler 4xe.
SEOCONTENT-START
Cummins Inc. Box 3005 Columbus, IN 47202 – 3005 USA Mail Code: 40911 Phone: 1 800 CUMMINS
care cummins
.com *** IMPORTANT SAFETY RECALL*** NHTSA Recall No. 22E-054 Interim Recall Notice September 2, 2022 Dear Cummins
Customer: This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Cummins
Inc. has decided that a defect which relates to motor vehicle safety exists in certain Cummins
PowerDriveโข electric drivetrain systems that were manufactured between June 1, 2018 and March 8, 2021. This notice applies to the PowerDrive electric drivetrain systems in your vehicle(s) listed on the enclosed table. WHAT IS THE PROBLEM? The air compressor housing is not properly grounded; as a consequence, the air compressor housing may experience electrical voltage greater than 50V AC during air compressor operation. This condition may lead to an electric shock for any person (in particular, service personnel) touching the air compressor housing while the air compressor is operating. This issue does not present a hazard to occupants of a vehicle during operation. WHAT WILL CUMMINS
DO? Cummins
will correct this condition by installing a ground strap between the air compressor motor housing and the vehicle chassis. Cummins
is currently procuring the parts for this remedy. You will receive a second notification to inform you when the final remedy is available and to provide instructions to schedule the recall for your PowerDrive system. WHAT SHOULD YOU DO? In the meantime, Cummins
advises operators and service personnel to ensure the air compressor is not operating by turning off the vehicle keyswitch before opening the access door (if so equipped) or before touching the air compressor. If you have questions or concerns about this recall, please contact your local Cummins
Distributor or authorized warranty dealer. You may also contact Cummins
Care at 1-800- CUMMINS
(1-800- 286-6467) or visit our website at care.cummins
.com. If you have a complaint relative to this recall, you may report it to the following: Administrator National Highway Traffic Safety Administration Cummins
Inc. Box 3005 Columbus, IN 47202 – 3005 USA Mail Code: 40911 Phone: 1 800 CUMMINS
care cummins
.com 1200 New Jersey Avenue, SE Washington, DC 20590 You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov. If you have not registered your Cummins
product, please complete the enclosed registration card or register your product at https://prodreg.cummins.com/prodreg/#/webform/contactInfo. If you are no longer the owner of the vehicle(s) listed on the enclosed table, please forward this notice to the new owner or provide the new ownerโs contact information to Cummins
so that we can notify them of this recall. Federal law requires vehicle lessors receiving this recall notice to forward a copy of this notice to the lessee within ten (10) days. Also, it is a violation of Federal law for a dealer to deliver new vehicle or equipment covered by this recall notice under a sale or lease until the defect has been remedied. Cummins
is taking this action in the interest of safety and satisfaction with our products. We apologize for any inconvenience and thank you for your attention to this matter. Sincerely, Campaign Administrator Cummins
Inc.
**************************************************************************************************************
2/1/23, 9:08 AM BES PD7000 Air Compressor Grounding Safety Campaign https://quickserve.cummins.com/qs3/pubsys2/xml/en/campaign/2026/c2619.html 1/3 Warranty Field Campaign Campaign Number: c2619 Revision: BES PD7000 Air Compressor Grounding Safety Campaign Released Date: 26-Jan- 2023 Expiration Date (U.S. and Canada): 31-Jan-2053 Expiration Date (International): 31-Jan- 2053 Attention If additional information is required, please contact your Cummins
Warranty Operations Group Leader. Description Action Worldwide distr./ branches and Div./Reg Offices U.S. / Canadian Dealers U.S. / Canadian Distr./Branches and Div. Offices (Automotive) This Safety Campaign is being issued to install grounding straps (PN 6301390) between the High Voltage Air Compressor Motor and the chassis on all BES CM0904 EV104B and BES CM2450 EV105B products. In order to qualify for repair under this field action, an air compressor: 1. will be covered Regardless of coverage status, and 2. must show as OPEN on QuickServeยฎ Online for this field action. Note : The SSN list is attached for reference. After verifying that the engine meets the above requirements, perform the following actions: Note : Please refer to Attachment B for detailed repair instructions. 1. Perform Lockout Tagout then install grounding strap between High Voltage Air Compressor and mounting location on High Voltage Air Compressor Inverter. 2. File a claim for one or more SSNs updated at the same time. 2/1/23, 9:08 AM BES PD7000 Air Compressor Grounding Safety Campaign Material Disposition There are no materials to be removed in this field action. Reimbursements Parts The following parts are covered under this field action: Part Number 010077200 563643400 630139000 Quantity 1 1 1 Description NUT,LCK SCR,CAP SRP,GND Note : SRTs to gain access that are required to complete the repair, that are sufficiently explained in the claim narrative, may also be claimed on this action. Labor Using Applicable Access Code and Time SRT Code Description Time (hrs) 00-90X Administrative time Air Compressor – Remove 33-005 33-01S 99-00C Travel and Install – BES CM0904 EV104B (OPTIONAL) Air Compressor – Remove and Install – BES CM2450 EV105B (OPTIONAL) GROUNDING STRAP INSTALLATION (QTY 1) Travel is covered under this field action. Towing is covered under this field action. Other Claimables Consumables are covered under this field action. Claim Instructions https://quickserve.cummins.com/qs3/pubsys2/xml/en/campaign/2026/c2619.html 2/3 2/1/23, 9:08 AM BES PD7000 Air Compressor Grounding Safety Campaign For Cummins
Dealers, claims for this Field Campaign must be filed via RAPIDSERVEโข Web (rsw.cummins
.com). For information regarding RAPIDSERVEโข Web, please reference the “Warranty” tab in QuickServeยฎ Online. If there are additional questions, please contact your local Cummins
Distributor. Claim Codes Description Code Account Code: 65 Pay Code: North America Distributor = X Pay Code: North America Dealer = D Pay Code: International
Distributor = I Pay Code: International
Dealer = R Failure Code: WCAGSA Attachments Click here to see c2619_ssn-list.xlsx (/service/english/attachments/c2619_ssn-list.xlsx) Click here to see c2619_attachment-b.pdf (/service/english/attachments/c2619_attachment-b.pdf) All Engine Family Design Application All Fuel System Market Application Document History Date Details Document Created; 26-Jan-2023 Last Modified: 26-Jan-2023 https://quickserve.cummins.com/qs3/pubsys2/xml/en/campaign/2026/c2619.html 3/3 C2619 โ Attachment B BES PD7000 Air Compressor Grounding Safety Campaign Installing Grounding Strap On Air Compressor Overview 2A 1. Perform LockOut TagOut (LOTO) on the unit following Safe Service Procedure. Refer to the service manual link below. Both models use the same procedure. https://quickserve.cummins.com/qs3/service/suite/xml/en/purpose/10/10- 24-1584.html#s32239 2. Install grounding strap (CMI PN 6301390) to Air compressor assembly. 2A – Attach one side to the pre-existing hole on the air compressor oil dipstick bracket. – Torque: 27 Nโm [239 in-lb] 2B – Attach one side to the air compressor inverter mounting location. 2B – Torque: 27 Nโm [239 in-lb] 3. Ensure grounding strap is not rubbing against any cables or hoses (caution areas shown on next slide) Some buses may require the Air compressor assembly to be lowered or removed from the chassis to complete step #2. If necessary, refer to service manual instructions (linked below) to remove, then reinstall the air compressor assembly. Both models use the same procedure https://quickserve.cummins.com/qs3/service/suite/xml/en/purpose/10/10-29- 3206.html Internal Use Only 2 Step 3 – Ensure grounding strap is not rubbing against any cables or hoses Proper Routing Improper Routing Potential spots for rubbing to watch out for Rubbing on hose Critical to ensure there is no rubbing on the HV cable Rubbing on wires Internal Use Only 3 44
**************************************************************************************************************
Cummins Inc. Box 3005 Columbus, IN 47202 – 3005 USA Mail Code: 40911 Phone: 1 800 CUMMINS care cummins.com *** IMPORTANT SAFETY RECALL*** NHTSA Recall No. 22E-054 Cummins Campaign #C2619 February 3, 2023 Dear Cummins Customer: This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Cummins Inc. has decided that a defect which relates to motor vehicle safety exists in certain Cummins PowerDriveโข electric drivetrain systems that were manufactured between June 1, 2018 and March 8, 2021. Cummins previously mailed you an interim notice advising you of this recall and informing you that you would receive this second notice when the remedy is available. This notice applies to the PowerDrive electric drivetrain systems in your vehicle(s) listed on the enclosed table. WHY IS A RECALL BEING CONDUCTED? The air compressor housing is not properly grounded; as a consequence, the air compressor housing may experience electrical voltage greater than 50V AC during air compressor operation. This condition may lead to an electric shock for any person (in particular, service personnel) touching the air compressor housing while the air compressor is operating. This issue does not present a hazard to occupants of a vehicle during operation. WHAT ARE WE DOING ABOUT THE PROBLEM? Cummins has released field Safety Campaign #C2619 BES PD7000 Air Compressor Grounding Safety Campaign to correct this condition. The remedy is to install a ground strap between the air compressor motor housing and the vehicle chassis. Repair parts are currently available at Cummins Distributors and authorized Warranty Dealers. The repair will be completed free of charge (parts and labor) and most applications will require approximately 3 ยฝ hours to complete. Cummins Inc. Box 3005 Columbus, IN 47202 – 3005 USA Mail Code: 40911 Phone: 1 800 CUMMINS care cummins.com WHAT SHOULD YOU DO? Contact the nearest Cummins Distributor or authorized Warranty Dealer to arrange to have this campaign performed on your vehicle. The distributor or dealer will work with you to schedule the best date to complete the repair. In the meantime, Cummins advises operators and service personnel to ensure the air compressor is not operating by turning off the vehicle keyswitch before opening the access door (if so equipped) or before touching the air compressor. If you have questions or concerns about this recall, please contact your local Cummins Distributor or authorized warranty dealer. You may also contact Cummins Care at 1-800- CUMMINS (1-800- 286-6467) or visit our website at care.cummins.com. If you have a complaint relative to this recall, you may report it to the following: Administrator National Highway Traffic Safety Administration 1200 New Jersey Avenue, SE Washington, DC 20590 You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov. If you have not registered your Cummins product, please complete the enclosed registration card or register your product at https://prodreg.cummins.com/prodreg/#/webform/contactInfo. If you are no longer the owner of the vehicle(s) listed on the enclosed table, please forward this notice to the new owner or provide the new ownerโs contact information to Cummins so that we can notify them of this recall. Federal law requires vehicle lessors receiving this recall notice to forward a copy of this notice to the lessee within ten (10) days. Also, it is a violation of Federal law for a dealer to deliver new vehicle or equipment covered by this recall notice under a sale or lease until the defect has been remedied. Cummins is taking this action in the interest of safety and satisfaction with our products. We apologize for any inconvenience and thank you for your attention to this matter. Sincerely, Campaign Administrator Cummins Inc.
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-506 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Blue Bird Body Company Submission Date : JAN 23, 2023 NHTSA Recall No. : 22V-506 Manufacturer Recall No. : R22BY-NSB Manufacturer Information : Manufacturer Name : Blue Bird Body Company Address : P.O. Box 937 402 Blue Bird Boulevard Fort Valley GA 31030 Company phone : 478-822-2242 Population : Number of potentially involved : 1 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2022-2022 Blue Bird All American Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : HYBRID ELECTRIC Descriptive Information : The subject Electric Drivetrain contains an electric air compressor to supply compressed air to the vehicle. These systems were sold as original equipment for installation in certain school buses and as original or upfit equipment for installation in certain medium duty trucks and terminal tractors. This recall consists of the entire population of PD7000 systems built prior to implementation of a new air compressor. Production Dates : APR 06, 2022 – APR 06, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : The air compressor housing on these units is not properly grounded. As a consequence, the air compressor housing may experience an electrical voltage potential greater than 50V AC during air compressor operation. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : This condition may lead to an increased risk of injury from electric shock for any person (in particular, service personnel) touching the air compressor housing assembly while the air compressor is operating. Description of the Cause : The cause is missing electrical grounding of the air compressor housing with respect to the vehicle chassis. Identification of Any Warning that can Occur : None Part 573 Safety Recall Report 22V-506 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 Involved Components : Component Name 1 : Compressor, Air (Cummins) Component Description : Electrically Driven Air Compressor (Cummins) Component Part Number : 5611745 (Cummins) Supplier Identification : Component Manufacturer Name : Cummin, Incorporated Address : 500 Jackson Street Columbus Indiana 47201 Country : United States Chronology : April 21, 2022: A Cummins employee experienced a mild electric shock, when he touched the air compressor motor housing at a Cummins facility. April 21 through May 11, 2022: Cummins conducted an investigation to understand the cause of the issue. During the investigation, the voltage between the air compressor housing and vehicle chassis for the incident unit was measured as 110 V to 130V AC. Testing was conducted on the two configurations of air compressor and inverter assemblies to understand the ground paths and to verify the missing ground. May 11 through June 1, 2022: A Cummins Product Safety Hazard Analysis was conducted. Testing was completed on the current production air compressor to confirm that it does not have this condition. June 1 through June 28, 2022: Cummins escalated the issue through its Product Safety Defect Determination process. June 28, 2022: Based upon the results of the investigation, the Cummins Product Safety Defect Board decided to conduct a safety campaign to address this condition. To date, there have been no reports of electrical shock (other than the Cummins employee on April 21, 2022 or injuries due to this condition. July 12, 2022: Blue Bird Corporation was notified by Cummins of the Air Compressor Safety Recall Campaign. Part 573 Safety Recall Report 22V-506 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 Description of Remedy : Description of Remedy Program : An electrical ground strap will be installed between the air compressor motor housing and the vehicle chassis. Pursuant to 49 CFR 577.11(e), Cummins requests that it be exempt from providing notification of a reimbursement plan. Any pre-notification product failure would have been replaced under the manufacturerโs limited warranty. Accordingly, no person would be eligible for reimbursement pursuant to 573.13. Cummins will reimburse the cost of the repair related to this recall at no cost to the Dealer or to the vehicle owner. How Remedy Component Differs from Recalled Component : The air compressor with the remedy ground strap installed will be visibly different than the air compressor without the ground strap. Identify How/When Recall Condition was Corrected in Production : For reasons unrelated to this condition, units manufactured on and after 4/19/2022 are equipped with a new air compressor (P/N 5678863) in which the air compressor and electrical inverter are integrated into a single assembly that is collectively electrically grounded and does not have this condition. Recall Schedule : Description of Recall Schedule : Dealer and Owner Notifications are to be issued on or before September 2, 2022. Parts availability undetermined at this time. Cummins will reimburse the labor cost of the repair related to this recall at no cost to the Dealer or to the vehicle owner. Cummins expects the remedy to be available and published to Cummins’ service network mid- February 2023 and will mail owner letters shortly after the campaign is released to the field. Planned Dealer Notification Date : FEB 06, 2023 – FEB 06, 2023 Planned Owner Notification Date : FEB 06, 2023 – FEB 06, 2023 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-506 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Blue Bird Body Company Submission Date : JUL 14, 2022 NHTSA Recall No. : 22V-506 Manufacturer Recall No. : R22BY-NSB Manufacturer Information : Manufacturer Name : Blue Bird Body Company Address : P.O. Box 937 402 Blue Bird Boulevard Fort Valley GA 31030 Company phone : 478-822-2242 Population : Number of potentially involved : 1 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2022-2022 Blue Bird All American Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : HYBRID ELECTRIC Descriptive Information : The subject Electric Drivetrain contains an electric air compressor to supply compressed air to the vehicle. These systems were sold as original equipment for installation in certain school buses and as original or upfit equipment for installation in certain medium duty trucks and terminal tractors. This recall consists of the entire population of PD7000 systems built prior to implementation of a new air compressor. Production Dates : APR 06, 2022 – APR 06, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : The air compressor housing on these units is not properly grounded. As a consequence, the air compressor housing may experience an electrical voltage potential greater than 50V AC during air compressor operation. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : This condition may lead to an increased risk of injury from electric shock for any person (in particular, service personnel) touching the air compressor housing assembly while the air compressor is operating. Description of the Cause : The cause is missing electrical grounding of the air compressor housing with respect to the vehicle chassis. Identification of Any Warning that can Occur : None Part 573 Safety Recall Report 22V-506 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 Involved Components : Component Name 1 : Compressor, Air (Cummins) Component Description : Electrically Driven Air Compressor (Cummins) Component Part Number : 5611745 (Cummins) Supplier Identification : Component Manufacturer Name : Cummin, Incorporated Address : 500 Jackson Street Columbus Indiana 47201 Country : United States Chronology : April 21, 2022: A Cummins employee experienced a mild electric shock, when he touched the air compressor motor housing at a Cummins facility. April 21 through May 11, 2022: Cummins conducted an investigation to understand the cause of the issue. During the investigation, the voltage between the air compressor housing and vehicle chassis for the incident unit was measured as 110 V to 130V AC. Testing was conducted on the two configurations of air compressor and inverter assemblies to understand the ground paths and to verify the missing ground. May 11 through June 1, 2022: A Cummins Product Safety Hazard Analysis was conducted. Testing was completed on the current production air compressor to confirm that it does not have this condition. June 1 through June 28, 2022: Cummins escalated the issue through its Product Safety Defect Determination process. June 28, 2022: Based upon the results of the investigation, the Cummins Product Safety Defect Board decided to conduct a safety campaign to address this condition. To date, there have been no reports of electrical shock (other than the Cummins employee on April 21, 2022 or injuries due to this condition. July 12, 2022: Blue Bird Corporation was notified by Cummins of the Air Compressor Safety Recall Campaign. Part 573 Safety Recall Report 22V-506 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 Description of Remedy : Description of Remedy Program : An electrical ground strap will be installed between the air compressor motor housing and the vehicle chassis. Pursuant to 49 CFR 577.11(e), Cummins requests that it be exempt from providing notification of a reimbursement plan. Any pre-notification product failure would have been replaced under the manufacturerโs limited warranty. Accordingly, no person would be eligible for reimbursement pursuant to 573.13. Cummins will reimburse the cost of the repair related to this recall at no cost to the Dealer or to the vehicle owner. How Remedy Component Differs from Recalled Component : The air compressor with the remedy ground strap installed will be visibly different than the air compressor without the ground strap. Identify How/When Recall Condition was Corrected in Production : For reasons unrelated to this condition, units manufactured on and after 4/19/2022 are equipped with a new air compressor (P/N 5678863) in which the air compressor and electrical inverter are integrated into a single assembly that is collectively electrically grounded and does not have this condition. Recall Schedule : Description of Recall Schedule : Dealer and Owner Notifications are to be issued on or before September 2, 2022. Parts availability undetermined at this time. Cummins will reimburse the labor cost of the repair related to this recall at no cost to the Dealer or to the vehicle owner. Planned Dealer Notification Date : SEP 02, 2022 – SEP 02, 2022 Planned Owner Notification Date : SEP 02, 2022 – SEP 02, 2022 * NR – Not Reported
SEOCONTENT-END
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.