Fuel Line in Heater May Leak – 2022 Newmar Super Star, Ventana, 2022-2023 New Aire, Essex, Dutch Star, & Mountain Aire Motorhomes

“This site contains affiliate links for which OEMDTC may be compensated”

August 4, 2022 NHTSA CAMPAIGN NUMBER: 22V583000

Fuel Line in Heater May Leak

A fuel leak in the presence of an ignition source can increase the risk of a fire.

 

NHTSA Campaign Number: 22V583

Manufacturer NewmareBay Corporation

Components EQUIPMENT, FUEL SYSTEM, DIESEL

Potential Number of Units Affected 92

 

Summary

NewmareBay Corporation (NewmareBay) is recalling certain 2022 Super Star, Ventana, 2022-2023 New Aire, Essex, Dutch Star, and Mountain AireeBay motorhomes equipped with InternationaleBay Thermal Research powered heaters. These heaters could have an incorrect fuel line installed that may leak.

 

Remedy

Dealers will inspect and replace the fuel line as needed, free of charge. Owner notification letters were mailed on September 30, 2022. Owners may contact NewmareBay’s customer service at 1-800-731-8300.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Chronology :

NewmareBay Corporation is reporting this recall following an initial supplier quality alert on 2/14/22, on 2/17/22 the issue was sent to the warranty control committee to be reviewed for a possible submittal to the product safety committee, NewmareBay continued to work with ITR to determine how many units they had affected with this issue and if they would be filing a recall on these heaters, on 7/13/22 ITR informed NewmareBay they would handling the issue with a technical bulletin for repairs and not submitting a recall, on 7/28/22 the NewmareBay product safety committee meet again on the issue and decided to move forward with a recall as ITR had decided they would only be handling the issue with the technical service bulletin.

 


10 Affected Products

Vehicles

MAKEMODELYEAR
NEWMAReBayDUTCH STAR2022-2023
NEWMAReBayESSEX2022-2023
NEWMAReBayMOUNTAIN AIREeBay2022-2023
NEWMAReBayNEW AIRE2022-2023
NEWMAReBaySUPER STAR2022
NEWMAReBayVENTANA2022

 


5 Associated Documents

Recall Acknowledgement

RCAK-22V583-4924.pdf 645.92KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [630.78 KB]

 


Defect Notice 573 Report

RCLRPT-22V583-5933.PDF 216.101KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [211.04 KB]

 


Recall Quarterly Report #1, 2022-4

RCLQRT-22V583-6646.PDF 211.109KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.16 KB]

 


Recall Quarterly Report #1, 2022-4

RCLQRT-22V583-9061.PDF 211.109KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.16 KB]

 


Recall Quarterly Report #2, 2023-1

RCLQRT-22V583-7510.PDF 211.209KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.26 KB]

 


Latest Recalls Documents

 


 

SaleBestseller No. 1
3/8 Inch (10mm) ID Fuel Line Hose 10FT NBR Rubber Push Lock Hose High Pressure 300PSI for Automotive Fuel Systems Engines
  • 【Size】ID: 3/8" (10mm), OD: 2/3" (17mm), Length: 10FT
  • 【Working Conditions】NBR Fuel Hose Working Temperature Range: -40°F to 257°F. Working Pressure: 300PSI. Burst Pressure: 1160PSI
  • 【Premium Material】Made of premium NBR materials, long service life, wear resistance and high temperature resistance, perfect racing accessories for fuel injection
  • 【Applicable Medium】NBR Fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air, etc
  • 【Wide Application】NBR Fuel Line Hose widely used in the fuel system, steam emission, oil cooling, please check the pressure of application before purchase
Bestseller No. 2
4 Sizes Petrol Fuel Gas Line Pipe Hose Tubing For String Trimmer Chainsaw Blower Lawn Mower and other Power Tools For 2 Cycle Small Engine Poulan, Craftman and more (Yellow 4PC)
  • 4 Different Size Fuel Line Hose - I.D x O.D: 0.08" x 0.14" (2mm x 3.5mm), 1/8" x 1/4" (3mm x6mm),1/8" x 3/16"(3mm x5mm),3/32" x 3/16" (2.5mm x5mm)
  • 4 Feet Long Fuel Line Fuel Hose Fuel Tube
  • Our Fuel Hose Line Tube Fits for Most 2 Cycle Small Engines
  • Perfect Replacement Fuel Line Set for chainsaws, blowers, weedeater whackers trimmers and other engine machines
  • Premium Material petrol fuel line - Oil and gas resistant, corrosion resistant.
Bestseller No. 3
YAMAKATO 10 Feet 1/4 Inch ID Fuel Line Hose for Kawasaki Kohler Briggs & Stratton Small Gas Diesel Powersports Engines and Generators w/ 20 Clamp Rubber Black
  • For gas, diesel etc. fuel lines, vapor emission lines and vacuum smog control. Please note it's a non pressure fuel line, not for engines with fuel pumps.
  • Stretchy two-layer compound structure, heavy-duty, with the outer layer wrapping the inner layer more evenly compared to others. 10 ft in length. 1/4 in 6.4mm inner diameter and 7/16 inch outer diameter (10.4mm). The Hose Clamp is 10mm inner diameter, made of 1mm thinkness steel.
  • The Fuel Lines are oil resistant, hot and cold resistant from -22F to 338F and ethanol tolerance; Extra long can be be cut to size for all your usage.
  • Designed for conveying gasoline, E-85, diesel, and bio-diesel fuels in lawn mowers, tillers, tractors, snow blowers, motorcycles, motor bicycles, minieBay bikes, dirt bikes, generators, trash water pumps, pit bikes, ATV, UTV, go karts, tao tao, 4 wheelers, snowmobiles, power pressure washers, marine boat outboardand motors, just about all small engines
  • For Briggs and Stratton MTD Troy Bilt Craftsman Tecumseh Cub Cadet Yard Machine Yard Man lawn mowers and snow blowers etc. Package includes one 10 feet fuel line and 20pcs Hose Clamps.
SaleBestseller No. 4
Tnisesm 3.3Feet 5 Size-1/8" 3/16" 0.22" 1/4" 5/16"ID Fuel Line Gas Tube Hose with 70Pcs Clamps Compatible Small Engines Kawasaki EZGO Golf Cart Snowmobile Motorcycle ATV Tractor Lawn Mowers
  • Tubing Kit Includes-3.3Feet Fuel Line Hose(inner diameter are 1/8inch, 3/16inch, 0.22", 1/4inch, 5/16inch) and 70Pcs hose clamps. 5different specifications can be applied to various home outdoor mechanic occasions, to meet your various needs, and is the necessary combination of machinery maintenance tools
  • Longevity - The smooth and flat surface of our fuel hose can withstand large pressure, and the included hose clamps secure the oil line well, ensuring long service life
  • Fuel Hose Size-1/8(Inner diameter: 3.5mm; Outer diameter: 7.5mm);3/16(Inner diameter: 4.8mm; Outer diameter: 9mm);0.22"(Inner diameter: 5.5mm; Outer diameter: 10.3mm);1/4(Inner diameter: 6.4mm; Outer diameter: 10.5mm); 5/16(Inner diameter: 8mm; Outer diameter: 12mm)The cost-effective product portfolio can meet your different needs at the same time
  • Widely Applications: Suitable for fuel systems, oil cooling, vapor discharge, and more, our fuel lines can convey gasoline, diesel, biodiesel, motor oil, lubricant, water, and air
  • Easy to use and install; Replace it regularly, and 70 extra fuel hose clips can better fix the fuel pipe; Size matching can save you a lot of time in finding suitable fixtures in the local market, and you don't need to buy those parts extra
Bestseller No. 5
10 Feet Long Fuel Line Fuel Hose Fuel Tube 1/4" ID x 3/8" OD with Hose Clamps for small engines
  • Special formulation for all power equipment, Resists swelling and hardening, Oil and gas resistant, Maintains air tight seal on fittings even in extreme temperatures, the fuel line still can maintain normal working conditions.
  • No compatible with greater than 10% ethanol fuel, Translucent material allows visual inspection of flow
  • Length: 10 feet (3.05 meter), I.D x O.D: 1/4" x 3/8"
  • Package includes: 10 Feet(3.05m) 1/4" ID Fuel Line,10 Hose Clamps
  • 100% Satisfaction guaranteed: customer satisfacton is our top priority. If you have any concerns, please do not hesitate to contact us
SaleBestseller No. 6
CocoMocart 10-Foot Length Stretchy 1/4 Inch ID Fuel Line+20pcs 2/5" ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engines
  • The Fuel Lines are oil resistant,cold-resistant and ethanol tolerance;Custom Extra long 10 Foot Length (3M) can be cut to size for all your applications
  • Package includes:10 Feet(3m) 1/4" ID Fuel Line,20 X 2/5" ID Hose Clamps
  • For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control.
  • Designed for conveying gasoline, E-85, diesel, and bio-diesel, fuels in mowers tractors snow blowers dirt bikes and just about all small engines.
  • Fuel line:1/4 inch inside diameter (0.64 cm) and 2/5 inch outside diameter (1cm);Hose Clamp for 1/4-inch and 1/4-inch Fuel Filter.
SaleBestseller No. 7
EVIL ENERGY 3/8 Fuel Hose Line Push Lock NBR Rubber SAE 30R7 10FT 300PSI
  • [Specifications] ID: 3/8"(9.5mm); OD: 2/3"(17mm). Minimum Bend Radius: 3.9"(100mm). Wall thickness: 3mm.
  • [Parameter] Working Pressure: 300psi. Burst Pressure: 1200psi. Temperature Range: -40°F to 257°F.
  • [Medium] The NBR fuel hose compatible with diesel, oil, gasoline, biodiesel, grease, etc.
  • [Material] The 30R7 fuel hose is made of NBR and braided polyester fiber, oil and wear resistant.
  • [Application] The fuel hose meets and exceeds SAE 30R7 standards, widely used for fuel system,oil cooling,steam emission, etc.
Bestseller No. 8
AloneGoer 3 Feet 1/8" 3/16" 0.22" 1/4" 5/16" ID Fuel Line Gas Tube Hose Compatible with Kawasaki EZGO Snowmobile Lawn Mowers Tractors Bike Scooter ATV Golf Cart Motorcycle w 40PCS Clips
  • Flexible Set: Our 5 Sizes Set includes fuel line gas tube hose sizes with lengths of 3 feet: 1/8" (3.5mm7.5mm), 3/16" (4.5mm8.5mm), 0.22"0.4" (5.5mm10.3mm), 1/4" (6mm12mm), and 5/16" (7.3mm12.5mm) and 40 hose clamps for various home outdoor mechanic occasions.
  • Durable Material: Made of NBR rubber with a braided layer of polyester thread, our thicker fuel hose is wear-resistant, anti-aging, high/low temp resistant, and has good acid and alkali resistance.
  • Multiple Sizes: With 5 different sizes available, our flexible NBR rubber tubes can fit various small engines including ATVs, lawn mowers, tillers, tractors, snow blowers, motorcycles, motor bicycles, generators, and more.
  • Longevity: The smooth and flat surface of our fuel hose can withstand large pressure, and the included hose clamps secure the oil line well, ensuring long service life.
  • Wide Applications: Suitable for fuel systems, oil cooling, vapor discharge, and more, our fuel lines can convey gasoline, diesel, biodiesel, motor oil, lubricant, water, and air.
Bestseller No. 9
EVIL ENERGY 8AN Fuel Line Kit, 8AN Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black
  • 8an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.
  • The braided fuel hose can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.
  • Maximum Working Pressure: 750psi. Bursting Pressure: 2250psi. Temperature Range: -22°F to 248°F.
  • Package includes: 10pcs 8an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 8an hose separator clamp and 8an braided fuel line (Length: 20 Feet). Hose ID: 0.41". Hose OD: 0.65inch.
  • 8an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid; the hose fittings are made of aluminum alloy.
SaleBestseller No. 10
Tanbupu 3.3Ft 5 Sizes-1/8" 3/16" 0.22" 1/4" 5/16" ID Fuel Line with 50Pcs Clamps Gas Tube Hose Compatible with Kawasaki EZGO Snowmobile Tractors Golf Cart ATV Motorcycle Small Engines Lawn Mowers
  • Package 5 Sizes fule lines and hose clamps -55Pcs in total. 3.3Feet Fuel Line Hose(inner diameter are 1/8inch, 3/16inch, 0.22", 1/4inch, 5/16inch) ,50Pcs clmaps(inner diameter are 7mm, 8mm, 9mm, 10mm,12mm). The size of the hose clamp matches the size of the hose
  • Material: Our fuel lines are made of ‌premium NBR. ‌ Nitrile butadiene rubber (NBR) has excellent oil resistance, good wear resistance, excellent heat resistance, and strong adhesion
  • Performance:The fuel hose surface is smooth and flat, with clear dimensional identification. Matched hose clamps extend service life and increase usage scenarios
  • Details:1/8inch(ID: 3.5mm; OD: 7.5mm);3/16inch(ID: 4.8mm; OD: 9mm);0.22"inch(ID: 5.5mm; OD: 10.3mm);1/4inch(ID: 6.4mm; OD: 10.5mm); 5/16inch(ID: 8mm; OD: 12mm)
  • Application:Our flexible NBR rubber tubes can fit various small engines including ATVs, lawn mowers, tillers, tractors, snow blowers, motorcycles, motor bicycles, generators, and more.Suitable for fuel systems, oil cooling, vapor discharge, and more

 


Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...