โThis site contains affiliate links for which OEMDTC may be compensatedโ |
August 29, 2022 NHTSA CAMPAIGN NUMBER: 22V654000
Detached hood bezel covers may cause a road hazard and increase the risk of a crash.
NHTSA Campaign Number: 22V654
Manufacturer Daimler Trucks North America, LLC
Components STRUCTURE
Potential Number of Units Affected 4,006
Summary
Daimler Truck North America, LLC (DTNA) is recalling certain 2020-2023 47X and 49X vehicles. The hood bezel covers may detach.
Remedy
Dealers will inspect and install rivets on the hood bezel covers, as necessary, free of charge. Owner notification letters were mailed May 26, 2023.
Owners may contact DTNA customer service at 1-800-547-0712. DTNA’s number for this recall is FL-951.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Check for Daimler Trucks North America Recalls
Subject: Western Star
Grill Bezel Covers
Models Affected: Specific model years 2020-2023 Western Star 47X and 49 X vehicles manufactured March 18, 2019, through August 26, 2022, and equipped with Inner & Outer Bezels on the grill.
General Information
Daimler Truck North America LLC, on behalf of its on behalf of its wholly owned subsidiary, Western Star Truck Sales, Inc., has decided that a defect that relates to motor vehicle safety exists on the vehicles mentioned above. Until the final Recall remedy is available, this interim procedure may be performed.
On the affected vehicles, the stainless steel grill bezel cover may loosen and detach causing a road hazard and increase the risk of a crash.
The final repair is being validated. For the interim repair, the vehicles will be inspected and rivets will be installed.
Work Instructions
Please refer to the attached work instructions. Before beginning work, use OWL to confirm whether a vehicle is eligible for an interim Recall repair.
Replacement Parts
Please do not order replacement parts until the vehicle is inspected and progressive damage has been determined. Only less than 1% of the vehicles will experience progressive damage needing hood bezel and grille bezel replacement. Obtain parts for this interim Recall repair by ordering from your facing Parts Distribution Center.
Table 1 – Interim Repair Parts for INT FL951
25-FL951-000
Campaign Number | Part Description | Part Number | Qty. |
INT FL951-01 | RIVET-BLIND,5/32,S.S. | 23-11716-001 | 12 ea |
BEZEL-REINF,HOOD,INNER,LH | A17-21893-000 | 1 ea | |
BEZEL-REINF,HOOD,INNER,RH | A17-21893-001 | 1 ea | |
BEZEL-REINF,HOOD,OUTER,LH | A17-21894-000 | 1 ea | |
BEZEL-REINF,HOOD,OUTER,RH | A17-21894-001 | 1 ea | |
BEZEL-REINF,HOOD,TALL,OUTER,LH | A17-21894-002 | 1 ea | |
BEZEL-REINF,HOOD,TALL,OUTER,RH | A17-21894-003 | 1 ea | |
FRAME-GRILLE,LWR,LH | A17-21782-002 | 1 ea | |
FRAME-GRILLE,LWR,RH | A17-21782-003 | 1 ea |
Table 1
Hood Bezels Replacement
1. Check the base label (Form WAR259) for a completion sticker for FL951 (Form WAR261) indicating this work has been done. The base label is usually located on the passenger door about 12 inches (30 cm) below the door latch. If a sticker is present, no work is needed. If there is no sticker, proceed with the next step.
2. Park the vehicle on a level surface, shut down the engine, and set the parking brake. Chock the tires.
3. Check if any of the hood bezels are missing.
IMPORTANT: Please do not order replacement parts until the vehicle is inspected and progressive damage has been determined. Only less than 1% of the vehicles will experience progressive damage needing hood bezel and grille bezel replacement.
4. If any hood bezel is loose or missing, order the hood bezel from the parts distribution center (PDC), and replace the bezel. For instructions, see Section 88.02, Subject 110 of the 47X & 49X Workshop Manual.
5. Cover the areas that need to be drilled, using masking tape. See Fig. 1.
NOTE: To precisely mark the locations for drilling holes in the upper bezel, the hood handle has to be removed.
6. Remove the four mounting nuts that attach the hood handle to the hood. See Fig. 2.
7. Remove the hood handle.
NOTICE
The upper and the side bezels curve together at the upper corners. Use a straight edge to precisely mark the drilling locations.
8. Mark all the drilling locations using the measurements provided in Fig. 3.
9. Center punch the rivet locations, then use a 9/64-inch drill bit to drill 12 holes in the hood bezels.
10. Deburr the holes drilled in the hood bezels.
11. Install the rivets into each drilled hole. Figure 4 shows the rivets installed on the hood bezels.
12. Position the hood handle on the hood by inserting the handle-mounted studs into the respective holes on the hood.
13. Install the four mounting nuts. Tighten the nuts 60 lbfยทin (678 Nยทcm).
14. Clean a spot on the base label (Form WAR259) and attach a campaign completion sticker for FL951 (Form WAR260), indicating this work has been completed.
Chronology :
On or about March 8, 2022, DTNA was first notified through a Dealer Product Report (DPR) regarding debonding of Hood Bezel cover. On or about August 16, 2022, a Field Service Product Report (FSPR) & DPR duplicating the same issue was submitted to DTNA Compliance. DTNA promptly began an investigation that revealed that, on a specific population of vehicles built with hood Bezels, there is a possibility of the hood bezel (s) stainless steel covers de-bonding from the air intake. As part of that investigation, DTNA performed an initial warranty seek to identify any related claims not found in the prior notifications. Later in that same month, DTNAโs review became aware of 1 additional occurrence of covers de-bonding from the hood bezel(s). On August 25, 2022, out of abundance of caution, DTNA decided to conduct a voluntary safety recall on certain WST 47X and 49X vehicles built within the above mentioned manufacturing date range, that were equipped with these particular hood bezels. The summary of warranty claims, field or service reports, and other information is as follows: 4 warranty claims and 3 Field report from dates 12/17/2021 to 7/18/2022, 4 claims reporting fell off on the road. No deaths or injuries reported. On 08/29/2022 DTNA added Western Star 49X as additional model in portal. On October 4, 2022, upon review of production vehicles, DTNA reasonably amended the recall population from 4,006 to 3,513. On October 6, 2022 the updates in the chronology in the 573 report were amended to match the amended defect information report. On October 18, 2022, upon review of production vehicles, DTNA reasonably amended the recall population from 3,513 to 3,498. The description of the recall schedule for notifications was also added. On 04/11/2023 DTNA amended the 573 to reflect the final remedy status.
8 Affected Products
Vehicles
MAKE | MODEL | YEAR |
WESTERN STAR![]() | 47X | 2020-2023 |
WESTERN STAR![]() | 49X | 2020-2023 |
17 Associated Documents
Defect Notice 573 Report
RCLRPT-22V654-7290.PDF 214.189KB
Defect Information Report
RMISC-22V654-3522.pdf 889.086KB
Recall Acknowledgement
RCAK-22V654-9472.pdf 805.928KB
Recall 573 Report – October 6, 2022
RCLRPT-22V654-9756.PDF 214.31KB
Amended Defect Information Report
RMISC-22V654-1673.pdf 889.259KB
Recall 573 Report – October 4, 2022
RCLRPT-22V654-3080.PDF 214.191KB
Amended Defect Information Report
RMISC-22V654-1982.pdf 925.585KB
Recall 573 Report – October 6, 2022
RCLRPT-22V654-3689.PDF 214.31KB
Recall 573 Report – October 18, 2022
RCLRPT-22V654-3571.PDF 214.616KB
Amended Defect Information Report
RMISC-22V654-5132.pdf 926.054KB
Manufacturer Notices(to Dealers,etc)
RCMN-22V654-4994.pdf 464.842KB
Issued Interim Owner Notification Letter(Part 577)
RIONL-22V654-1440.pdf 181.724KB
Amended Defect Information Report
RMISC-22V654-9278.pdf 812.789KB
Recall 573 Report – April 13, 2023
RCLRPT-22V654-6573.PDF 214.626KB
Manufacturer Notices(to Dealers,etc)
RCMN-22V654-9441.pdf 191.941KB
Manufacturer Notices(to Dealers,etc)
RCMN-22V654-2767.pdf 150.688KB
ISSUED Owner Notification Letter(Part 577)
RCONL-22V654-1603.pdf 191.881KB
Latest Recalls Documents
- ใExtensive CompatibilityใAfter the upgrade, the compatibility is wider and more accurate! HD601 heavy duty truck scanner supports all major truck models that comply with standard protocols (SAE J1939, SAE J1708, ISO 14230-4, ISO 15764-4 and ISO 9141-2, ISO 27145-4 and Euro6). Fits for Cummins
, Paccar
, Detroit, Perkins, Freightliner
, International
, Peterbilt
, Ford
, Class 4-Class 8 trucks, etc. It also check engine diagnosis on most cars, minivans and light trucks
- ใ Full System DiagnosticใHD601 Diesel Scanner supports all system scans of heavy trucks compliant with standard protocols SAE J1939 & J1708, such as Engine, ABS
, Transmission, Braking System, ESP, EPS, Fuel System, etc, It is a great scan tool fits for Cummins
, Caterpillar
, Detroit, Perkins, Maxxforce, Bendix
,Wabash
, Wabaco, Haldex
, Allison, Eaton
heavy trucks, With this truck tool, you can get deep analysis data about the system and do some repairs by yourself, saving much time and money
- ใEnhanced Diesel OBD ScannerใThe HD601 Diesel OBD Scanner offers unparalleled diagnostic capabilities for heavy-duty trucks. Beyond code reading, clearing, and live data display, it retrieves vehicle information, freeze frames, and DTCs. With 6, 9, and 16 pin cables, it ensures compatibility with various engines. This scanner's real-world testing prowess ensures comprehensive support for a wide array of heavy-duty truck engines, making it an indispensable tool for truck diagnostics
- ใDTC Libraryใ+ใLife Time Free UpdateใThe built-in DTC library allows you to retrieve the codes directly without searching for the definition in the book. Whether you are a professional mechanic or a DIY car owner, HD601 diesel scanner explains the existing problem, makes it easier for you to understand the codes definition and fix the problem faster. Plus, you get a lifetime free internet updates, so you always have the latest software for diagnostics in English and Spanish languages
- ใFriendly Design, Easy of UseใThis scanner is plug and play, simple and convenient, and very friendly for beginners. With improved buttons for easy menu navigation. The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work.
- ใDiesel EnginesใHD500 heavy duty truck scanner is tailored to vehicles equipped with cummins
, cat, detroit, paccar
, international
, hino and more engines. This diesel scan tool come with diverse adapters, including diesel 6 & 9 pin, CAT-9 pin, CAT-14 pin, 16 pin cable. It is engineered to deliver accurate and reliable diagnostics, ensuring compatibility and effective troubleshooting for your trucks. Tip: If your truck fault code is factory custom protocol, please enter the diagnostic menu, and then select the corresponding engine to test, so that your test data will be more accurate.(Please note that the HD500 does not have bidirectional and VGT calibration.)
- ใAdvanced DPF ManagementใThe longer a truck is in use, the more particles accumulate in the D.P.F and the more the D.P.F becomes clogged, affecting engine performance and emissions efficiency. This HD500 diesel scanner provides you with DPF regeneration, D.P.F reset, DPD, DPR status control and more functions to achieve efficient cleaning, optimise engine performance and prolong D.P.F life. Save maintenance costs by avoiding D.P.F replacement through regular D.P.F cleaning and D.P.F regeneration. All made easy with the HD500. Warm tips: the HD500 can't do dpf function on Isuzu
.
- ใCylinder Cut-off ServicesใThe cylinder cut-off test can diagnose engine failure problems. The HD500 heavy duty truck scan tool sends a command to the ECU to cut off the injector of a cylinder to check if the injector of that cylinder is not working properly. If the engine speed drops more, the better the cylinder works; if the speed drop is not obvious or does not drop then the cylinder may be faulty; touch the high-pressure pipe between the common rail tube to the injector with your hand, the stronger the pulsation, the better the injection effect. This diesel scan tool provides clear guidance for maintenance.
- ใSpeed Limit Reset & ABS
ใLimit setting enables you can check and set the engine speed and the vehicle road speed limit when the vehicle is stationary, which ensures driving safety. And this diesel scanner also can make you achieve a firm brake pedal by removing air from the ABS
module. HD500 truck scanner helps you maintain commercial vehicle breakdowns at all times, saving you money efficiently and winning more business for you! Please note that the adjust the speed limit is supported by fewer vehicles (eg: the cummins
engine cannot support speed limit adjust), please confirm the vehicke VIN with us before purchase.
- ใAccess All Major Systems with EaseใThe HD500 heavy duty scanner truck diesel provides full diagnostic capabilities, covering the engine, ABS
, SRS, EPB, Park Brake Controller, DPF, etc. Comes with full HD OBD/EOBD/ OBD2 service modes, including read codes, erase codes, live data, etc. Allows you to quickly identify issues and perform necessary solutions.
- WHY NEXAS NL102+ Diagnostic Tool: Compared with many other heavy duty truck scanner, NL102+ diagnostic tool has more comprehensive diagnostic capabilities, supporting all system diagnostics for all major trucks that comply with standard protocols and full OBD2 functionality. In addition to read/clear codes, displaying live data, it also supports retrieving vehicle information, freezing frames, and DTC lookup. NL102+ OBD2 scanner comes with 6-pin, 9-pin, 16-pin connectors are available to ensure compatibility with a wide range of trucks. You'll get f-ree updates for life, so you always have the latest diagnostic software in English, Spanish and French
- Wide Compatibility: The NEXAS NL102+ heavy duty truck diagnostic scanner is compatible with all heavy-duty trucks that adhere to standard protocols (J1587, J1939, J1708). It covers a wide range of vehicle models, including Cummins
, Detroit, Caterpillar
, Freightliner
, International
, Kenworth
, John Deere, Peterbilt
, Sterling, Mack
, Paccar
, Western Star
, Mercedes-Benz
, Volvo
, Scania, MAN, Renault, ERF, Foden, Seddon-Atkinson, Iveco, DAF, SISU, STEYR, and ISUZU
. Additionally, it supports 10 modes of OBD testing for complete diagnostics and battery voltage monitoring on passenger cars and light vehicles (from Europe, America, and Asia) manufactured after 1996
- Save Up to Hundreds Money for All Heavy Duty Trucks: NEXAS NL102+ diesel scan tool supports accurate full system scanning for all heavy-duty trucks that comply with standard protocols (J1587, J1939, and J1708). This includes vehicle systems such as the engine, transmission, instrument panel, drivetrain, brake system, suspension, ABS
, ESP, EPS, fuel system, etc. The diagnostic scan tool communicates with the vehicle's computer to retrieve data stream information, allowing it to accurately pinpoint issues. This reduces the waste caused by blind part replacements, saving your time and hundreds or thousands of money
- All OBD2 Function & Battery Health Monitoring: Compared with other products on the market that only support partial OBD2 functions, this OBD2 scanner supports all OBD2 functions: read/clear codes, live data, freeze frame data, I/M readiness, EVAP test, on-board monitor, O2 sensor test, vehicle information, and DTC lookup, this providing more analysis basis for professional technicians. By regularly detecting the status of the vehicle battery with NL102+ OBD scan tool, it helps to take measures before the battery completely fails to avoid the situation that the vehicle suddenly fails to start. It can accurately diagnose the battery's condition thus saving on repair costs
- Plug and Play & One-click for DTC: NEXAS NL102+ diesel scanner is user-friendly. It comes with an intuitive screen and easy-to-understand interface, making it accessible even for non-professionals to get started. And the built-in DTC library in the code reader allows you to directly retrieve codes without searching for definitions in books, making it easier to understand the code definitions and solve problems more quickly
- ใ2025 NEWEST LAUNCH 1st Advanced Scan Tool Compatible With 12V&24V VehiclesใDesign for Passenger&Commercial Vehicles 2 in1,work for Cars/Trucks/buses/trailers/excavators/diesel engine/pick-up/etc.
- ใJ2534 Reprogramming with Smartlink CใAdvanced OEM J2534 reprogramming,Helps access direct data online, replace existing software/firmware in ECU,program new ECUs and fix software-controlled issue.
- ใOver 60 Service Reset Functions + Bi-Directional + ECU Coding ใThis scan tool can support ECU Coding,60+ reset service functions like SAS/EPB/TPMS/DPF/Oil/Brake/ABS
Bleed, Injector coding, etc.
- ใ2025 BEST Advanced Hardware & All Systems Diagnosis+Topology Display ใSupport All systems Diagnostic including ENG, AT, ECM, TCM, ABS
, SRS, BCM, BMS, TPMS, SAS, Fuel System, Light System and more.
- ใWider Vehicle Coverage of 12V & 24V Vehicles + 25 LanguagesใLAUNCH X431 PRO3S+SMARTLINK HD automotive scanner is ALL-IN-ONE Scan Tool for 12V cars and 24V Heavy-duty trucks support CANFD & DOIP.
- Extend DPF Life and Avoid Costly Repairs: Enhance your truck's performance with focused DPF care; featuring DPF regeneration, reset, and DPR state control for engines like Cummins
, Detroit, Caterpillar
, and more; save $10,000 to $30,000 in potential repairs; improve fuel efficiency and extend engine life; maintain reliable operation and reduce maintenance costs over time
- Designed for Cummins
Engine Vehicles: Fits almost all Cummins
engines (ISB
, ISC, ISD, ISG, ISK, ISL, ISX, ISM, ISN, QSB, X12, X15
, B6.7, L9
, L9N, QSM11, and more) commonly found in trucks like Freightliner
, Kenworth
, International
, Peterbilt
, Mack, Volvo
, Western Star
, Autocar, Terex, and school buses like Thomas/Blue Bird, It's also compatible with Komatsu/Sany machinery, Agrifac vehicles, RVs, and more. Note: For RVs with non-Cummins
engines, please confirm engine type to verify compatibility
- Maximize Caterpillar
Engine Performance: Diesel scanner designed for Caterpillar
engines (C7, C9, C11, C13, C15, C32, and more) in trucks like Caterpillar
, Freightliner
, Peterbilt
, and Kenworth
. Features include code reading/clearing, live data streaming, ECU retrieval, DPF regeneration, and more; unlock your engine's full potential with enhanced diagnostics and maintenance
- Designed for Detroit Engine Trucks: This heavy duty truck scan tool is compatible with a wide range of heavy duty commercial trucks โ class 7 and class 8, medium duty trucks, light duty trucks and semi-trucks equipped with Detroit engines, including DD13, DD15, DD16, Series 50, Series 60, MBE 900, MBE 4000, OM501, OM502, DDDL 6, and DDDL 7
- Designed for Paccar Engine Trucks: This heavy-duty truck scanner diagnostic tool is specifically designed for Paccar engines, including Paccar PX-7, PX-9, MX-11, MX-13
- ๐ฅ๐ฅ๐ฅ2025 New Functions Making X7 HD the Top Dog - Big Surprise!!! ANCEL X7 HD truck scanner 10 major functional advantages .โ >Full HDOBD/OBD2 Function โ >ALL System Diagnostic โ >42+ Reset Function โ >Active Test / Bi-Directional Controlโ >ECU Codingโ >Graphing Live Dataโ >Wide Compatibility โ >2 Yrs Free Updateโ >Remote Operationโ >Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: โ >6000 mAhโ >10.1 inch Tabletโ >2G RAMโ >32G ROM (Expandable to 128GB)โ >Data Record & Replay & Printโ >Android 10.0โ >Bluetooth 5.0 & Wifiโ >14 Languages
- ๐OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7 HD diesel scanner diagnostic tool not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABS Automatically. Moreover, it features TPMS activation, cylinder cut-off and learning functions.
- ๐Advanced ECU Coding & Programming - ANCEL X7 HD 10.1inch truck scanner diagnostic tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility.
- ๐42+ Reset Functions & Bidirectional Control - 2025 newest top heavy duty truck scan tool, comes with 42+ special services (ECU, Speed Limit and Idle Reset, Oil Reset, Injector Coding, EPB, ABS, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance. Please send your VIN# to our ๐ amazon@anceltech.com ๐ to check compatibility.
- ๐10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7 HD diesel truck scan tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABS, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc.
- ๐จโโ๏ธD.P.F Cleaner Doctor: As a long-term truck user, do you still struggle with clogged filters and engine slowdowns? The HD3300 PLUS+ professional DPF regeneration scanner offers complete D.P.F reset/forced regen, DPR status monitoring, and DPD regeneration capabilities to enhance engine performance and emission control efficiency. Compatible with Cummins, Detroit, Cat, International, Volvo
, Mack, Paccar, Isuzu, Hino, and Fuso major diesel engine brands. This heavy duty truck scanner effectively prevents soot and particulate buildup, helping you avoid costly ($4000 -$8000 ) D.P.F replacements.
- ๐Widely Compatible: This heavy duty truck scanner includes adapters like CAT-9 PIN, DIESEL 6&9 PIN, and OBD 16 PIN, supporting protocols such as J1587, J1939, J1708, J27145, ISO9141-2, ISO14230-2, and ISO15765-4. Built for heavy duty trucks or semi trucks with Cummins, Caterpillar, Detroit, and Paccar. So, this truck scanner diagnostic tool fit for Freightliner, Peterbilt, Volvo
HD, Mack, International, Ford HD trucks. ANCEL HD3300 PLUS+ truck scanner ensures precise diagnostics and seamless problem-solving for an unparalleled user journey. NOTE: NOT SUPPORT 12V light-duty trucks or pickup trucks.
- ๐Full System Diesel Diagnostic Tool: HD3300 Plus+ diesel scanner diagnostic tool provides depth diagnostics for all major systems, including Engine, Transmission, ABS, EBS, ESC, ASR, Airbag, BCM, SCR, Instrument, Air Suspension, and DPF. As an ALL-IN-ONE diesel scanner, it supports HD OBD & OBD2 service modes, such as read/erase codes, and live data stream, ensuring quick and precise issue identification for optimal performance.
- ๐ฆAnvanced Oil Light Reset Function: Changing oil is the most important part of routine maintenance for vehicle. HD3300 PLUS+ obd2 scanner for diesel trucks support OEM level oil reset for ISUZU & FUSO &HINO, help reset the Oil Life Reminder (turn off the Oil Service Light) when the replacement of engine oil is done in case of the impurities in oil may damage the engine. So vehicles can recalculate another optimal oil life change interval depending on the vehicle driving conditions and climate, makes your driving safety gets ensuring.
- ๐ Economize Your Budget: NO HIDDING UPDATE FEES!! The ANCEL HD3300 Plus+ diesel mechanic tools offers one-click Lifetime F*ree Update, keeping you up-to-date with the latest features. Expert technical support for you a hassle-fr*ee experience. With this scanner, it can keep an eye on your truck condition in time!
- ๐ใ2025 Top-level Diagnostic Tool, Ideal for Commercial Vehiclesใ: LAUNCH 129HD heavy duty truck scanner is supports more than 50+ vehicle models, such as light/heavy truck, pickup, buses, trailer, tractor, dumper, agricultural and construction vehicles. It delivers such as DPF regen, speed limit adjustment. 129HD also includes 7+ special services, full system functions, EOBD/HDOBD/OBD2 functions, graphing live data, data screenshot/feedback/Email, 2 year free-update and 24/7 customer service.
- ๐ใ7+ Special Service Cover 99% Commercial Vehiclesใ: LAUNCH 129HD diesel truck obd2 scanner is designed for commercial vehicles, it contain 7+ special service for mechanics to do daily auto maintenance in workshops, such as DPF Regen, Oil Reset, Speed Limit Adjustment, ABS bleeding, Injector Coding, Cylinder Deactivation Compression, Clutch Relearn and so on. It can help you handle faults for commercial vehicles, save your money, quickly & efficiently, and win more business!
- ๐ใWide Vehicle Range of Compatibilityใ:LAUNCH 129HD diagnostic tool is designed to work with OBD2/CAN, J1587, J1708 and J1939 compatible vehicles. It support 99% commercial vehicles and 300+ vehicle models. It fit for Cummins, Caterpillar, Detroit, International, Paccar, Volvo
, Freightliner, Kenworth, Isuzu, Hino, Western Star, Sterling, Peterbilt, Maxxforce, Peterbilt, Maxxforce, Scania, Man, DAF, Mercedes
-Benz, USAFORD,Aisin, Allison, Case, Credo, Deutz and so on.
- ๐ใOE-Level Full System Diagnostic &Remote Diagnoseใ:LAUNCH 129HD heavy truck scanner offers full system functions to make the comprehensive diagnostic. It works on Engine, ABS, SRS, SAS, Transmission, TPMS, ESP, EPB, Brake, Park Brake Controller, DPF, Immobilizer, etc, allows you to quickly and comprehensively identify fault problems. You can send the diagnostic report and feedback to remote system or service center, enabling real-time monitoring of multiple vehicles and proactive maintenance scheduling.
- ๐ใAdcanced DPF Regeneration & Speed Limited Adjust Functionใ: The DPF function of 129HD integrates monitoring, control, analysis and fault diagnosis capabilities to ensure that the DPF system can operate effectively under various operating condition. It applied to 50+ engine models such as Cummins Caterpillar Detroit International Paccar Volvo
Peterbilt . Remote diagnose will transmittethe diagnostic report/feedback to a remote system or service center, which will offer a professional suggestion for your vehicles.
- ใWide CompatibilityใHD430 supports 12V 24V trucks, equipped with diesel connectors (CAT-9, Diesel 6pin & 9pin) and OBDII 16pin, with strong truck adaptation and compatibility. Product supports SAE J1939, SAE J1708, SAE J1850 PWM, SAE J1850 VPW, ISO 14230-4, ISO 9141-2, ISO 15765-4, ISO 27145-4 truck protocols, provides complete scan & fast scan, and available in English and Spanish, it is suitable for DIY enthusiasts, old-school mechanics, truck owners or small repair shops.
- ใ D.P.F Regen For Cunmmis & CaterpillarใHD430 supports Cummins and Caterpillar engines for D.P.F reset & regeneration, helping to remove diesel particles from truck D.P.F & meet maintenance schedules, thereby avoiding fault codes, maintaining engine performance, and extending DPF & truck life. Even if you aren't a professional mechanic, you can easily perform D.P.F regen using HD430 according to clear instructions, which can help your truck avoid roadside obstacles while reducing your repair time & cost. โNote: Not compatible with pickups/light trucks.
- ใDiesel Full System Diagnostic ToolใHD430 has excellent diagnostic performance, quickly scanning truck systems, detecting truck faults, while supporting the engine, ABS, transmission, fuel system and more. Read the fault code and DTC Lookup help you understand the cause of the fault, quickly clear the fault code after maintenance, so provide you with good maintenance assistance and convenience. HD430 heavy duty truck scanner will provide efficient, fast scanning of your truck system.
- ใEnhanced Diesel & Gasoline ScannerใHD430 has full HD OBD/EOBD/OBDII functions and supports heavy duty trucks with Cummins, Caterpillar, Detroit and Paccar engines. In addition to read & clear fault codes, view live data, ECUs, vehicle information, it also supports functions such as freeze frame, I/M readiness, on-board monitor test, etc. At the same time, the built-in DTC Lookup can help you quickly query and understand the specific definition of the fault code & solve the problem, providing strong support & convenience for your vehicle maintenance.
- ใAdvanced Hardware & Designใ4.3-inch screen, 8G memory, 8G TF, 2.4G Wifi & other hardware, your truck repair process will be more stable. Wifi Lifetime Free Update, you can always keep up with the latest diagnostic functions and optimized performance of HD430, compared with others, you can avoid expensive update subscription fees. The imperial conversion to meet your needs for the use of the unit of measurement. Unique horizontal screen button design, your operation will be more comfortable and convenient.
- PLEASE NOTE: If you encounter any quality issues or notice signs of use upon receiving your product, please e-m ail us at toptool-service@outlook.com with your order number and photos. We will gladly provide FREE replacements to ensure your satisfaction. Thank you for your cooperation
- ใDPF Reset & Forced Regen for Cummins & Catใ ANCEL HD100 heavy duty truck scanner supports DPF reset and forced regeneration for Cummins (X15
, X12, ISX, etc.) and Caterpillar (C7, C9, C13, etc.) diesel engines. This professional DPF regeneration tool helps you save on costly DPF replacements and improve fuel efficiency. Confirm your vehicleโs VIN with us before purchase (toptool-service@outlook.com)
- ใOne-Click DPF Management โ No Dealer Requiredใ Perform DPF regeneration and reset in just one click, avoiding expensive repair shop visits. Frequent short trips cause DPF clogs, leading to reduced fuel efficiency or even truck breakdowns. With ANCEL HD100 truck scanner, resolve these aftertreatment issues in 30 minutes, getting your semi truck or diesel truck back on the road fast
- ใFull-System Diesel Scanner for Heavy Duty TrucksใThis ANCEL HD100 provides mechanic-level diagnostics for Freightliner, Paccar, Kenworth, Peterbilt, International, Volvo
, Mack, Western Star, semi trucks, and buses. Read and clear codes for engine (Cummins, Caterpillar, Detroit, Paccar), ABS, and transmission (Allison, Bendix, Eaton, Wabco, ZF). Supports SAE J1939, SAE J1708, SAE J1850 PWM, SAE J1850 VPW, ISO 14230-4, ISO 9141-2, ISO 15765-4, ISO 27145-4 standard protocols
- ใ2-in-1 OBD2 Scanner for Diesel Trucksใ ANCEL HD100 functions as both a heavy-duty truck diagnostic tool and an OBD2 code reader. Diagnose truck engines, ABS, and transmission or check car engine codes with freeze frame data, real-time data, and I/M readiness. Ensure your truck or car passes its annual inspection with ease
SEOCONTENT-START
DAIMLER TRUCK NORTH AMERICA | 4555 N CHANNEL AVE, PORTLAND, OR 97217 | 503.745.8000 | WWW.DAIMLERTRUCKNORTHAMERICA.COM Defect / Noncompliance Information Report (Section 573.6) FL-951 Date of Submission: 04/11/2023 (10/18/2023) Manufacturer: Daimler Truck North America LLC P.O. BOX 3849 Portland, Oregon 97208 Type of Report: X Safety Defect โ Non-Compliance Vehicle Information Model Yr. Start: 2020 Model Yr. End: 2023 Make: Western Star Model: 47X & 49X Production Dates: Begin: 03/20/2019 End: 08/25/2022 Descriptive Information: On certain vehicles built within the above manufacturing date range that are equipped with Inner & Outer Bezels on the hood, the stainless steel cover on the Bezel(s) may de-bond and potentially fall off. Basis for Determination of the Recall Population: Vehicles built with a particular Inner & Outer Bezels on the hood. Number potentially involved: 3,498 Estimated percentage of involved with defect: 1% DAIMLER TRUCK NORTH AMERICA | 4555 N CHANNEL AVE, PORTLAND, OR 97217 | 503.745.8000 | WWW.DAIMLERTRUCKNORTHAMERICA.COM Defect / Noncompliance Description For this Defect/Noncompliance: Describe the defect or noncompliance: The stainless steel cover on Inner & Outer Bezels on the hood may de-bond and subsequently fall off the vehicle. Describe the safety risk: If the hood bezel(s) stainless steel covers falls during operation, it may become road debris, increasing the risk of a crash. Identify any warning which can precede or occur: N/A Involved Components Component Name: Hood Bezel Covers Component Description: Hood Bezel, Inner & Outer Component Part Number: A17-21894-000, A17-21893-000, A17-21893-000, A17-21893-001, A17-21894-000, A17-21894-001, A17-21894-002 & A17-21894-003. Component’s country of origin: Name: American Trim Address: 1005 West Grand Avenue Lima, OH 45801 419-228-1145 Country: United States of America DAIMLER TRUCK NORTH AMERICA | 4555 N CHANNEL AVE, PORTLAND, OR 97217 | 503.745.8000 | WWW.DAIMLERTRUCKNORTHAMERICA.COM Chronology of Defect / Noncompliance Determination Provide the chronology of events leading up to the defect decision or test data for the noncompliance decision: On or about March 8, 2022, DTNA was first notified through a Dealer Product Report (DPR) regarding de-bonding of Hood Bezel cover. On or about August 16, 2022, a Field Service Product Report (FSPR) & DPR duplicating the same issue was submitted to DTNA Compliance. DTNA promptly began an investigation that revealed that, on a specific population of vehicles built with hood Bezels, there is a possibility of the hood bezel(s) stainless steel covers de-bonding from the air intake. As part of that investigation, DTNA performed an initial warranty seek to identify any related claims not found in the prior notifications. Later in that same month, DTNAโs review became aware of 1 additional occurrence of covers de-bonding from the hood bezel(s). On August 25, 2022, out of abundance of caution, DTNA decided to conduct a voluntary safety recall on certain WST 47X and 49X vehicles built within the above mentioned manufacturing date range, that were equipped with these particular hood bezels. The summary of warranty claims, field or service reports, and other information is as follows: 4 warranty claims and 3 Field report from dates 12/17/2021 to 7/18/2022, 4 claims reporting fell off on the road. No deaths or injuries reported. On 08/29/2022 DTNA added Western Star 49X as additional model in portal. On October 4, 2022, upon review of production vehicles, DTNA reasonably amended the recall population from 4,006 to 3,513. On October 6, 2022 the updates in the chronology in the 573 report were amended to match the amended defect information report. On October 18, 2022, upon review of production vehicles, DTNA reasonably amended the recall population from 3,513 to 3,498. The description of the recall schedule for notifications was also added. On 04/11/2023 DTNA amended the 573 to reflect the final remedy status. DAIMLER TRUCK NORTH AMERICA | 4555 N CHANNEL AVE, PORTLAND, OR 97217 | 503.745.8000 | WWW.DAIMLERTRUCKNORTHAMERICA.COM Identify the Remedy Describe the defect/noncompliance remedy program, including the manufactureโs plan for reimbursement. Grill bezel Covers will be inspected and rivets installed. The Recall will take approximately one hour and will be performed free of charge. Repair will be performed by Daimler Truck North America authorized service facilities. Daimler Truck North America shall be offering a refund for owner-paid repairs covered by this recall if the repair was performed prior to the date indicated in the reimbursement plan, which will be posted with ownerโs notification letter. Owners are directed to seek reimbursement through authorized dealers. Identify the Recall Schedule Describe the recall schedule for notifications.: Customer notification will be made by first class mail using Daimler Trucks North America records to determine the customers affected. Planned Dealer Notification Begin Date: 10/28/2022 Planned Dealer Notification End Date: 10/28/2022 Planned Owner Notification Begin Date: 10/28/2022 Planned Owner Notification End Date: 10/28/2022 Does DTNA plan to file inconsequentiality petition? โ Yes X No Manufacturerโs identification code for this recall (if applicable): FL951 DTNA Representative; Tiffani Torgeson Manager, Compliance and Regulatory Affairs
**************************************************************************************************************
Amended Defect Information Report (Section 573.6) FL-951 Date of Submission: 10/18/2022 Manufacturer: Daimler Truck North America LLC P.O. BOX 3849 Portland, Oregon 97208 Type of Report: X Safety Defect โ Non-Compliance Vehicle Information Model Yr. Start: 2020 Model Yr. End: 2023 Make: Western Star Model: 47X & 49X Production Dates: Begin: 03/20/2019 End: 08/25/2022 Descriptive Information: On certain vehicles built within the above manufacturing date range that are equipped with Inner & Outer Bezels on the hood, the stainless steel cover on the Bezel(s) may de-bond and potentially fall off. Basis for Determination of the Recall Population: Vehicles built with a particular Inner & Outer Bezels on the hood. Number potentially involved: 3,498 Estimated percentage of involved with defect: 1% Defect / Noncompliance Description For this Defect/Noncompliance: Describe the defect or noncompliance: The stainless steel cover on Inner & Outer Bezels on the hood may de-bond and subsequently fall off the vehicle. Describe the safety risk: If the hood bezel(s) stainless steel covers falls during operation, it may become road debris, increasing the risk of a crash. Identify any warning, which can precede or occur: N/A If applicable, identify the manufacture of the defective or noncompliant component. N/A Involved Components Component Name: Hood Bezel Covers Component Description: Hood Bezel, Inner & Outer Component Part Number: A17-21894-000, A17-21893-000, A17-21893-000, A17-21893-001, A17-21894-000, A17-21894-001, A17-21894-002 & A17-21894-003. Supplier Identification: Component Manufacturer: Name: American Trim Address: 1005 West Grand Avenue Lima, OH 45801 419-228-1145 Country: United States of America Chronology of Defect / Noncompliance Determination Provide the chronology of events leading up to the defect decision or test data for the noncompliance decision: On or about March 8, 2022, DTNA was first notified through a Dealer Product Report (DPR) regarding de-bonding of Hood Bezel cover. On or about August 16, 2022, a Field Service Product Report (FSPR) & DPR duplicating the same issue was submitted to DTNA Compliance. DTNA promptly began an investigation that revealed that, on a specific population of vehicles built with hood Bezels, there is a possibility of the hood bezel(s) stainless steel covers de-bonding from the air intake. As part of that investigation, DTNA performed an initial warranty seek to identify any related claims not found in the prior notifications. Later in that same month, DTNAโs review became aware of 1 additional occurrence of covers de-bonding from the hood bezel(s). On August 25, 2022, out of abundance of caution, DTNA decided to conduct a voluntary safety recall on certain WST 47X and 49X vehicles built within the above mentioned manufacturing date range, that were equipped with these particular hood bezels. The summary of warranty claims, field or service reports, and other information is as follows: 4 warranty claims and 3 Field report from dates 12/17/2021 to 7/18/2022, 4 claims reporting fell off on the road. No deaths or injuries reported. On 08/29/2022 DTNA added Western Star 49X as additional model in portal. On October 4, 2022, upon review of production vehicles, DTNA reasonably amended the recall population from 4,006 to 3,513. On October 6, 2022 the updates in the chronology in the 573 report were amended to match the amended defect information report. On October 18, 2022, upon review of production vehicles, DTNA reasonably amended the recall population from 3,513 to 3,498. The description of the recall schedule for notifications was also added. Identify the Remedy Describe the defect/noncompliance remedy program, including the manufactureโs plan for reimbursement. Hood bezels will be removed and replaced with new parts accordingly. New hood bezels will be assembled at the supplier location, using an improved manufacturing process. Replacement will be performed by Daimler Truck North America authorized service facilities. Daimler Truck North America shall be offering a refund for owner-paid repairs covered by this recall if the repair was performed prior to the date indicated in the reimbursement plan, which will be posted with ownerโs notification letter. Owners are directed to seek reimbursement through authorized dealers. Identify the Recall Schedule Describe the recall schedule for notifications: Customer notification will be made by first class mail using Daimler Truck North America records to determine the customers affected. Planned Dealer Notification Begin Date: 10/28/2022 Planned Dealer Notification End Date: 10/28/2022 Planned Owner Notification Begin Date: 10/28/2022 Planned Owner Notification End Date: 10/28/2022 Does DTNA plan to file inconsequentiality petition? โ Yes X No Manufacturerโs identification code for this recall (if applicable): FL-951 DTNA Representative; Sam Geser Manager, Compliance and Regulatory Affairs
**************************************************************************************************************
Amended Defect Information Report (Section 573.6) FL-951 Date of Submission: 08/29/2022 Manufacturer: Daimler Truck North America LLC P.O. BOX 3849 Portland, Oregon 97208 Type of Report: X Safety Defect โ Non-Compliance Vehicle Information Model Yr. Start: 2020 Model Yr. End: 2023 Make: Western Star Model: 47X & 49X Production Dates: Begin: 03/20/2019 End: 08/25/2022 Descriptive Information: On certain vehicles built within the above manufacturing date range that are equipped with Inner & Outer Bezels on the hood, the stainless steel cover on the Bezel(s) may de-bond and potentially fall off. Basis for Determination of the Recall Population: Vehicles built with a particular Inner & Outer Bezels on the hood. Number potentially involved: 4,006 Estimated percentage of involved with defect: 1% Defect / Noncompliance Description For this Defect/Noncompliance: Describe the defect or noncompliance: The stainless steel cover on Inner & Outer Bezels on the hood may de-bond and subsequently fall off the vehicle. Describe the safety risk: If the hood bezel(s) stainless steel covers falls during operation, it may become road debris, increasing the risk of a crash. Identify any warning, which can precede or occur: N/A If applicable, identify the manufacture of the defective or noncompliant component. N/A Involved Components Component Name: Hood Bezel Covers Component Description: Hood Bezel, Inner & Outer Component Part Number: A17-21894-000, A17-21893-000, A17-21893-000, A17-21893-001, A17-21894-000, A17-21894-001, A17-21894-002 & A17-21894-003. Supplier Identification: Component Manufacturer: Name: American Trim Address: 1005 West Grand Avenue Lima, OH 45801 419-228-1145 Country: United States of America Chronology of Defect / Noncompliance Determination Provide the chronology of events leading up to the defect decision or test data for the noncompliance decision: On or about March 8, 2022, DTNA was first notified through a Dealer Product Report (DPR) regarding de-bonding of Hood Bezel cover. On or about August 16, 2022, a Field Service Product Report (FSPR) & DPR duplicating the same issue was submitted to DTNA Compliance. DTNA promptly began an investigation that revealed that, on a specific population of vehicles built with hood Bezels, there is a possibility of the hood bezel(s) stainless steel covers de-bonding from the air intake. As part of that investigation, DTNA performed an initial warranty seek to identify any related claims not found in the prior notifications. Later in that same month, DTNAโs review became aware of 1 additional occurrence of covers de-bonding from the hood bezel(s). On August 25, 2022, out of abundance of caution, DTNA decided to conduct a voluntary safety recall on certain WST 47X and 49X vehicles built within the above mentioned manufacturing date range, that were equipped with these particular hood bezels. The summary of warranty claims, field or service reports, and other information is as follows: 4 warranty claims and 3 Field report from dates 12/17/2021 to 7/18/2022, 4 claims reporting fell off on the road. No deaths or injuries reported. On 08/29/2022 DTNA added Western Star 49X as additional model in portal. Identify the Remedy Describe the defect/noncompliance remedy program, including the manufactureโs plan for reimbursement. Hood bezels will be removed and replaced with new parts accordingly. New hood bezels will be assembled at the supplier location, using an improved manufacturing process. Replacement will be performed by Daimler Truck North America authorized service facilities. Daimler Truck North America shall be offering a refund for owner-paid repairs covered by this recall if the repair was performed prior to the date indicated in the reimbursement plan, which will be posted with ownerโs notification letter. Owners are directed to seek reimbursement through authorized dealers. Identify the Recall Schedule Describe the recall schedule for notifications: Customer notification will be made by first class mail using Daimler Truck North America records to determine the customers affected. Planned Dealer Notification Begin Date: 10/28/2022 Planned Dealer Notification End Date: 10/28/2022 Planned Owner Notification Begin Date: 10/28/2022 Planned Owner Notification End Date: 10/28/2022 Does DTNA plan to file inconsequentiality petition? โ Yes X No Manufacturerโs identification code for this recall (if applicable): FL-951 DTNA Representative; Sam Geser Manager, Compliance and Regulatory Affairs
**************************************************************************************************************
Amended Defect Information Report (Section 573.6) FL-951 Date of Submission: 10/06/2022 Manufacturer: Daimler Truck North America LLC P.O. BOX 3849 Portland, Oregon 97208 Type of Report: X Safety Defect โ Non-Compliance Vehicle Information Model Yr. Start: 2020 Model Yr. End: 2023 Make: Western Star Model: 47X & 49X Production Dates: Begin: 03/20/2019 End: 08/25/2022 Descriptive Information: On certain vehicles built within the above manufacturing date range that are equipped with Inner & Outer Bezels on the hood, the stainless steel cover on the Bezel(s) may de-bond and potentially fall off. Basis for Determination of the Recall Population: Vehicles built with a particular Inner & Outer Bezels on the hood. Number potentially involved: 3,513 Estimated percentage of involved with defect: 1% Defect / Noncompliance Description For this Defect/Noncompliance: Describe the defect or noncompliance: The stainless steel cover on Inner & Outer Bezels on the hood may de-bond and subsequently fall off the vehicle. Describe the safety risk: If the hood bezel(s) stainless steel covers falls during operation, it may become road debris, increasing the risk of a crash. Identify any warning, which can precede or occur: N/A If applicable, identify the manufacture of the defective or noncompliant component. N/A Involved Components Component Name: Hood Bezel Covers Component Description: Hood Bezel, Inner & Outer Component Part Number: A17-21894-000, A17-21893-000, A17-21893-000, A17-21893-001, A17-21894-000, A17-21894-001, A17-21894-002 & A17-21894-003. Supplier Identification: Component Manufacturer: Name: American Trim Address: 1005 West Grand Avenue Lima, OH 45801 419-228-1145 Country: United States of America Chronology of Defect / Noncompliance Determination Provide the chronology of events leading up to the defect decision or test data for the noncompliance decision: On or about March 8, 2022, DTNA was first notified through a Dealer Product Report (DPR) regarding de-bonding of Hood Bezel cover. On or about August 16, 2022, a Field Service Product Report (FSPR) & DPR duplicating the same issue was submitted to DTNA Compliance. DTNA promptly began an investigation that revealed that, on a specific population of vehicles built with hood Bezels, there is a possibility of the hood bezel(s) stainless steel covers de-bonding from the air intake. As part of that investigation, DTNA performed an initial warranty seek to identify any related claims not found in the prior notifications. Later in that same month, DTNAโs review became aware of 1 additional occurrence of covers de-bonding from the hood bezel(s). On August 25, 2022, out of abundance of caution, DTNA decided to conduct a voluntary safety recall on certain WST 47X and 49X vehicles built within the above mentioned manufacturing date range, that were equipped with these particular hood bezels. The summary of warranty claims, field or service reports, and other information is as follows: 4 warranty claims and 3 Field report from dates 12/17/2021 to 7/18/2022, 4 claims reporting fell off on the road. No deaths or injuries reported. On 08/29/2022 DTNA added Western Star 49X as additional model in portal. On October 4, 2022, upon review of production vehicles, DTNA reasonably amended the recall population from 4,006 to 3,513. On October 6, 2022 the updates in the chronology in the 573 report were amended to match the amended defect information report. Identify the Remedy Describe the defect/noncompliance remedy program, including the manufactureโs plan for reimbursement. Hood bezels will be removed and replaced with new parts accordingly. New hood bezels will be assembled at the supplier location, using an improved manufacturing process. Replacement will be performed by Daimler Truck North America authorized service facilities. Daimler Truck North America shall be offering a refund for owner-paid repairs covered by this recall if the repair was performed prior to the date indicated in the reimbursement plan, which will be posted with ownerโs notification letter. Owners are directed to seek reimbursement through authorized dealers. Identify the Recall Schedule Describe the recall schedule for notifications: Customer notification will be made by first class mail using Daimler Truck North America records to determine the customers affected. Planned Dealer Notification Begin Date: 10/28/2022 Planned Dealer Notification End Date: 10/28/2022 Planned Owner Notification Begin Date: 10/28/2022 Planned Owner Notification End Date: 10/28/2022 Does DTNA plan to file inconsequentiality petition? โ Yes X No Manufacturerโs identification code for this recall (if applicable): FL-951 DTNA Representative; Sam Geser Manager, Compliance and Regulatory Affairs
**************************************************************************************************************
Amended Defect Information Report (Section 573.6) FL-951 Date of Submission: 08/29/2022 Manufacturer: Daimler Truck North America LLC P.O. BOX 3849 Portland, Oregon 97208 Type of Report: X Safety Defect โ Non-Compliance Vehicle Information Model Yr. Start: 2020 Model Yr. End: 2023 Make: Western Star Model: 47X & 49X Production Dates: Begin: 03/20/2019 End: 08/25/2022 Descriptive Information: On certain vehicles built within the above manufacturing date range that are equipped with Inner & Outer Bezels on the hood, the stainless steel cover on the Bezel(s) may de-bond and potentially fall off. Basis for Determination of the Recall Population: Vehicles built with a particular Inner & Outer Bezels on the hood. Number potentially involved: 3,513 Estimated percentage of involved with defect: 1% Defect / Noncompliance Description For this Defect/Noncompliance: Describe the defect or noncompliance: The stainless steel cover on Inner & Outer Bezels on the hood may de-bond and subsequently fall off the vehicle. Describe the safety risk: If the hood bezel(s) stainless steel covers falls during operation, it may become road debris, increasing the risk of a crash. Identify any warning, which can precede or occur: N/A If applicable, identify the manufacture of the defective or noncompliant component. N/A Involved Components Component Name: Hood Bezel Covers Component Description: Hood Bezel, Inner & Outer Component Part Number: A17-21894-000, A17-21893-000, A17-21893-000, A17-21893-001, A17-21894-000, A17-21894-001, A17-21894-002 & A17-21894-003. Supplier Identification: Component Manufacturer: Name: American Trim Address: 1005 West Grand Avenue Lima, OH 45801 419-228-1145 Country: United States of America Chronology of Defect / Noncompliance Determination Provide the chronology of events leading up to the defect decision or test data for the noncompliance decision: On or about March 8, 2022, DTNA was first notified through a Dealer Product Report (DPR) regarding de-bonding of Hood Bezel cover. On or about August 16, 2022, a Field Service Product Report (FSPR) & DPR duplicating the same issue was submitted to DTNA Compliance. DTNA promptly began an investigation that revealed that, on a specific population of vehicles built with hood Bezels, there is a possibility of the hood bezel(s) stainless steel covers de-bonding from the air intake. As part of that investigation, DTNA performed an initial warranty seek to identify any related claims not found in the prior notifications. Later in that same month, DTNAโs review became aware of 1 additional occurrence of covers de-bonding from the hood bezel(s). On August 25, 2022, out of abundance of caution, DTNA decided to conduct a voluntary safety recall on certain WST 47X and 49X vehicles built within the above mentioned manufacturing date range, that were equipped with these particular hood bezels. The summary of warranty claims, field or service reports, and other information is as follows: 4 warranty claims and 3 Field report from dates 12/17/2021 to 7/18/2022, 4 claims reporting fell off on the road. No deaths or injuries reported. On 08/29/2022 DTNA added Western Star 49X as additional model in portal. On October 4, 2022, upon review of production vehicles, DTNA reasonably amended the recall population from 4,006 to 3,513. Identify the Remedy Describe the defect/noncompliance remedy program, including the manufactureโs plan for reimbursement. Hood bezels will be removed and replaced with new parts accordingly. New hood bezels will be assembled at the supplier location, using an improved manufacturing process. Replacement will be performed by Daimler Truck North America authorized service facilities. Daimler Truck North America shall be offering a refund for owner-paid repairs covered by this recall if the repair was performed prior to the date indicated in the reimbursement plan, which will be posted with ownerโs notification letter. Owners are directed to seek reimbursement through authorized dealers. Identify the Recall Schedule Describe the recall schedule for notifications: Customer notification will be made by first class mail using Daimler Truck North America records to determine the customers affected. Planned Dealer Notification Begin Date: 10/28/2022 Planned Dealer Notification End Date: 10/28/2022 Planned Owner Notification Begin Date: 10/28/2022 Planned Owner Notification End Date: 10/28/2022 Does DTNA plan to file inconsequentiality petition? โ Yes X No Manufacturerโs identification code for this recall (if applicable): FL-951 DTNA Representative; Sam Geser Manager, Compliance and Regulatory Affairs
**************************************************************************************************************
Daimler Truck North America LLC IMPORTANT SAFETY RECALL See enclosed VIN list October 2022 FL951 Interim Recall Notice NHTSA #22V-654 Subject: Western Star Grill Bezel Covers This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Daimler Truck North America LLC (DTNA), on behalf of its wholly owned subsidiary, Western Star Truck Sales, Inc., has decided that a defect which relates to motor vehicle safety exists on specific model years 2020-2023 Western Star 47X and 49X vehicles manufactured March 18, 2019, through August 26, 2022, and equipped with Inner & Outer Bezels on the grill. On the affected vehicles, the stainless steel grill bezel cover may loosen and detach causing a road hazard and increase the risk of a crash. The final repair to replace the grill bezel cover is being validated, as an interim repair, the vehicles will be inspected and a rivet will be installed. All repairs will be performed by Daimler Truck North America authorized service facilities. Please contact an authorized Daimler Truck North America dealer to arrange to have the interim repair performed and to ensure that parts are available at the dealership. The interim repair will take approximately one hour and will be performed at no charge to you. To locate an authorized dealer, search online at Daimler-TrucksNorthAmerica.com/Contact us. Scroll down to โLocate a Dealerโ and select the appropriate brand. You may also confirm your vehicleโs involvement in this recall at this URL: https://dtna-dlrinfo.prd.freightliner.com:48518/VinLookup/vin-module/getVinLookupPage. A second notice will inform you when the final repair is available. When you receive the second notice, please contact your authorized Daimler Trucks North America dealer to schedule the final repair for your vehicle. All vehicles that have the interim repair performed will also require the final repair. If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days. If you have questions about this Recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday, e-mail address DTNA.Warranty.Campaigns@Daimlertruck.com. For other concerns, you may contact the Customer Assistance Center at (800) 385-4357. If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or go to http://www.nhtsa.gov. We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety. WARRANTY CAMPAIGNS DEPARTMENT Enclosure Daimler Truck North America LLC Warranty Campaigns Department P.O. Box 4090 Portland, OR 97208-4090 800.547.0712 Phone
**************************************************************************************************************
Daimler Truck North America LLC IMPORTANT SAFETY RECALL This notice applies to your vehicle(s), see enclosed VIN list. May 2023 FL951 NHTSA #22V-654 Subject: Western Star Grill Bezel Covers This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Daimler Truck North America LLC (DTNA), on behalf of its wholly owned subsidiary, Western Star Truck Sales, Inc., has decided that a defect which relates to motor vehicle safety exists in certain Western Star 47X and 49X Model Years 2020-2023 vehicles manufactured between March 20, 2019 and August 25, 2022. On the affected vehicles, the stainless steel grill bezel covers may loosen and detach, causing a road hazard increasing the risk of a crash. A Daimler Truck North America authorized service facility will inspect the vehicles and install rivets. The Recall will take approximately one hour and will be performed free of charge. Please contact an authorized Daimler Truck North America dealer to arrange to have the Recall performed and to ensure that parts are available at the dealership. To locate an authorized dealer, search online at https://northamerica.daimlertruck.com/contact-us. Scroll down to โLocate a Dealerโ and select the appropriate brand. You may also confirm your vehicleโs involvement in this recall at the following URL: https://dtna-dlrinfo.prd.freightliner.com:48518/VinLookup/vin-module/getVinLookupPage. You may be liable for any progressive damage that results from your failure to complete the Recall within a reasonable time after receiving notification. If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days. If you have paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement. Please see the reverse side of this notice for details. If you have questions about this Recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday, e-mail address DTNA.Warranty.Campaigns@Daimlertruck.com to arrange to have the Recall performed. You may also confirm your vehicleโs involvement in this recall at this URL: https://dtna-dlrinfo.prd.freightliner.com:48518/VinLookup/vin-module/getVinLookupPage. For other concerns, you may contact the Customer Assistance Center at (800) 385-4357. If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or go to http://www.nhtsa.gov. We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety. WARRANTY CAMPAIGNS DEPARTMENT Enclosure Daimler Truck North America LLC Warranty Campaigns Department P.O. Box 4090 Portland, OR 97208-4090 800.547.0712 Phone Daimler Truck North America LLC Reimbursement to Customers for Repairs Performed Prior to Recall If you have already paid to have this recall condition corrected you may be eligible to receive reimbursement. Requests for reimbursement may include parts and labor. Reimbursement may be limited to the amount the repair would have cost if completed by an authorized Daimler Truck North America LLC dealer. The following documentation must be presented to your dealer for consideration for reimbursement. Please provide original or clear copies of all receipts, invoices, and repair orders that show โข The name and address of the person who paid for the repair โข The Vehicle Identification Number (VIN) of the vehicle that was repaired โข What problem occurred, what repair was done, when the repair was done โข Who repaired the vehicle โข The total cost of the repair expense that is being claimed โข Proof of payment for the repair (such as the front and back of a cancelled check or a credit card receipt) Reimbursement will be made by check from your Daimler Truck North America LLC dealer. Please speak with your Daimler Truck North America LLC authorized dealer concerning this matter. Daimler Truck North America LLC Warranty Campaigns Department P.O. Box 4090 Portland, OR 97208-4090 800.547.0712 Phone
**************************************************************************************************************
The information contained in this letter supercedes and supplements any related policies and procedures in any previously released bulletins, the Warranty Manual, and/or previously released letters. Failure to read or distribute this letter will not exempt addressees from compliance with the information contained herein. Page 1 of 2 Daimler Truck North America LLC REF #: ICI23-013 Effective: 04/12/23 Release: 04/12/23 SUBJECT: INT FL951 Will be Replaced by Final FL951 This letter is to inform you that INT FL951, Western Star Grill Bezel Covers, will be terminated on Wednesday 04/19/23. After 04/19/23 you will see INT FL951 marked as โExpiredโ in OWL. INT FL951 will be replaced by FL951, Western Star Grill Bezel Covers. Recall FL951 will be released on Wednesday 04/26/23. At that time, the FL951 bulletin will be available on the DTNA Portal. Last Repair Date for INT FL951: 04/17/23 Last Claim Date for Submission: 04/19/23 If you have questions or need further information, contact the Warranty Campaigns Department by submitting an inquiry through the WSC Link on DTNA Portal. I M P O R T N T C A M P A I G N I N F O R M A T I O N WARRANTY CAMPAIGNS DEPARTMENT P.O. Box 4090 800-547-0712 Portland, Oregon 97208-4090 ATTENTION: Dealer Principal, Warranty Manager, Service Manager, Parts Manager Freightliner Dealers โ U.S. and Canada Western Star and Sterling Dealers โ U.S. and Canada FCCC Dealers โ U.S. and Canada Thomas Built Buses Dealers โ U.S. and Canada Direct Warranty Customers โ U.S. and Canada Detroit Diesel Distributors Export Distributors If you have questions about this Letter, please submit your inquiry on the Web using the WSC Link on DTNAConnect The information contained in this letter supercedes and supplements any related policies and procedures in any previously released bulletins, the Warranty Manual, and/or previously released letters. Failure to read or distribute this letter will not exempt addressees from compliance with the information contained herein. Page 2 of 2 Daimler Truck North America LLC REF #: ICI23-010 Effective: 12/04/23 Release: 12/04/23 SUBJECT: INT FL951 sera remplacรฉ par Final FL951 Cette lettre est pour vous informer que INT FL951, Couvre-cadre Western Star Grill, sera rรฉsiliรฉ le mercredi 19/04/23. Aprรจs le 19/04/23, vous verrez INT FL951 marquรฉ comme “Expirรฉ” dans OWL. INT FL951 sera remplacรฉ par FL951, Couvre-cadre Western Star Grill. Le rappel FL951 sortira le mercredi 26/04/23. ร ce moment-lร , le bulletin FL951 sera disponible sur le portail DTNA. Derniรจre date de rรฉparation pour INT FL951 : 17/04/23 Date de la derniรจre demande de soumission : 19/04/23 Si vous avez des questions ou avez besoin de plus amples informations, contactez le service des campagnes de garantie en soumettant une demande via le lien WSC sur DTNA Portal. I M P O R T N T C A M P A I G N I N F O R M A T I O N WARRANTY CAMPAIGNS DEPARTMENT P.O. Box 4090 800-547-0712 Portland, Oregon 97208-4090 ATTENTION: Dealer Principal, Warranty Manager, Service Manager, Parts Manager Freightliner Dealers โ U.S. and Canada Western Star and Sterling Dealers โ U.S. and Canada FCCC Dealers โ U.S. and Canada Thomas Built Buses Dealers โ U.S. and Canada Direct Warranty Customers โ U.S. and Canada Detroit Diesel Distributors Export Distributors If you have questions about this Letter, please submit your inquiry on the Web using the WSC Link on DTNAConnect
**************************************************************************************************************
Subject: Western Star Grill Bezel Covers Models Affected: Specific model years 2020-2023 Western Star 47X a nd 4 9X v ehicles m anufactured M arch 1 8, 2 019, t hrough August 26, 2022, and equipped with Inner & Outer Bezels on the grill. Daimler Truck North America LLC Recall Campaign October 2022 INT FL951 NHTSA #22V-654 Transport Canada #2022-483 INTERIM RECALL Page 1 General Information Daimler Truck North America LLC, on behalf of its on behalf of its wholly owned subsidiary, Western Star Truck Sales, Inc., has decided that a defect that relates to motor vehicle safety exists on the vehicles mentioned above. Until the final Recall remedy is available, this interim procedure may be performed. On the affected vehicles, the stainless steel grill bezel cover may loosen and detach causing a road hazard and increase the risk of a crash. The final repair is being validated. For the interim repair, the vehicles will be inspected and rivets will be installed. Work Instructions Please refer to the attached work instructions. Before beginning work, use OWL to confirm whether a vehicle is eligible for an interim Recall repair. Replacement Parts Please do not order replacement parts until the vehicle is inspected and progressive damage has been determined. Only less than 1% of the vehicles will experience progressive damage needing hood bezel and grille bezel replacement. Obtain parts for this interim Recall repair by ordering from your facing Parts Distribution Center. Table 1 – Interim Repair Parts for INT FL951 25-FL951-000 Campaign Number Part Description Part Number Qty. INT FL951-01 RIVET-BLIND,5/32,S.S. 23-11716-001 12 ea BEZEL-REINF,HOOD,INNER,LH A17-21893-000 1 ea BEZEL-REINF,HOOD,INNER,RH A17-21893-001 1 ea BEZEL-REINF,HOOD,OUTER,LH A17-21894-000 1 ea BEZEL-REINF,HOOD,OUTER,RH A17-21894-001 1 ea BEZEL-REINF,HOOD,TALL,OUTER,LH A17-21894-002 1 ea BEZEL-REINF,HOOD,TALL,OUTER,RH A17-21894-003 1 ea FRAME-GRILLE,LWR,LH A17-21782-002 1 ea FRAME-GRILLE,LWR,RH A17-21782-003 1 ea Table 1 Labor Allowance Table 2 – Labor Allowance Claims for Credit An interim Recall repair is performed only when a failure is present, do not perform the interim repair if there is no failure. You will be reimbursed for your parts, labor, and handling by submitting your claim through the Warranty system within 30 days of completing an interim Recall repair. Please reference the following information in OWL: โข Claim type is Recall Campaign. โข In the Campaign field, enter the campaign number and appropriate group (INT FL951-01). โข In the Primary Failed Part field, enter 25-FL951-000. โข In the Parts section, enter the appropriate part(s) or kit number(s) as shown in the Replacement Parts Table. โข In the Labor section, enter the appropriate SRT from the Labor Allowance Table. Administrative time will be included automatically as SRT 939-6010A for 0.3 hours. โข THe VMRS Component Code is F99-999-005 and the Cause Code is A1 – Campaign. IMPORTANT: Confirm whether a vehicle is eligible for an interim Recall repair in OWL before beginning work. Contact the Warranty Campaigns Department from 7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday, via Web inquiry at DTNAConnect.com / WSC, or the Customer Assistance Center at (800) 385-4357, after normal business hours, if you have any questions or need additional information. The interim letter notifying vehicle owners is included for your reference. Daimler Truck North America LLC Recall Campaign October 2022 INT FL951 NHTSA #22V-654 Transport Canada #2022-483 INTERIM RECALL Page 2 Removed Parts Please follow Warranty Failed Parts Tracking shipping instructions for the disposition of all removed parts. Campaign Number Procedure Time Allowed (hours) SRT Code Corrective Action INT FL951-01 Inspect hood bezel and Install rivets 1.1 996-R159A 12-Repair Recall/Campaign Inspect, replace and rivet hood bezel 1.4 996-R159B 12-Repair Recall/Campaign Inspect, replace and rivet lower grille bezel 1.4 996-R159C 12-Repair Recall/Campaign Table 2 Copy of Notice to Owners Subject: Western Star Grill Bezel Covers Daimler Truck North America LLC Recall Campaign October 2022 INT FL951 NHTSA #22V-654 Transport Canada #2022-483 INTERIM RECALL For the Notice to U.S. Customers: This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. For the Notice to Canadian Customers: This notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This is to inform you that your vehicle may contain a defect that could affect the safety of a person. Daimler Truck North America LLC (DTNA), on behalf of its wholly owned subsidiary, Western Star Truck Sales, Inc., has decided that a defect which relates to motor vehicle safety exists on specific model years 2020-2023 Western Star 47X and 49X vehicles manufactured March 18, 2019, through August 26, 2022, and equipped with Inner & Outer Bezels on the grill. On the affected vehicles, the stainless steel grill bezel cover may loosen and detach causing a road hazard and increase the risk of a crash. The final repair is being validated. For the interim repair, the vehicles will be inspected and rivets will be installed. All repairs will be performed by Daimler Truck North America authorized service facilities. Please contact an authorized Daimler Truck North America dealer to arrange to have the interim repair performed and to ensure that parts are available at the dealership. The interim repair will take approximately one hour and will be performed at no charge to you. To locate an authorized dealer, search online at Daimler-TrucksNorthAmerica.com/Contact us. Scroll down to โLocate a Dealerโ and select the appropriate brand. You may also confirm your vehicleโs involvement in this recall at this URL: https:// dtna-dlrinfo.prd.freightliner.com:48518/VinLookup/vin-module/getVinLookupPage. A second notice will inform you when the final repair is available. When you receive the second notice, please contact your authorized Daimler Trucks North America dealer to schedule the final repair for your vehicle. All vehicles that have the interim repair performed will also require the final repair. If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days. For the Notice to U.S.Customers: If you have questions about this Recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m. to 4:00 p.m. Pacific Time Monday through Friday, e-mail address DTNA.Warranty.Campaigns@Daimlertruck.com, or the Customer Assistance Center at (800) 385-4357 after normal business hours. You may wish to submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or to o https://www.nhtsa.gov/. For the Notice to Canadian Customers: If you have questions about this Recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m. to 4:00 p.m. Pacific Time Monday through Friday, e-mail address DTNA.Warranty.Campaigns@Daimler.com, or the Customer Assistance Center at (800) 385-4357 after normal business hours. We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety. WARRANTY CAMPAIGNS DEPARTMENT Enclosure Page 3 Work Instructions Subject: Western Star Grill Bezel Covers Hood Bezels Replacement 1. Check the base label (Form WAR259) for a completion sticker for FL951 (Form WAR261) indicating this work has been done. The base label is usually located on the passenger door about 12 inches (30 cm) below the door latch. If a sticker is present, no work is needed. If there is no sticker, proceed with the next step. 2. Park the vehicle on a level surface, shut down the engine, and set the parking brake. Chock the tires. 3. Check if any of the hood bezels are missing. 4. If any hood bezel is loose or missing, order the hood bezel from the parts distribution center (PDC), and replace the bezel. For instructions, see Section 88.02, Subject 110 of the 47X & 49X Workshop Manual. Daimler Truck North America LLC Recall Campaign October 2022 INT FL951 NHTSA #22V-654 Transport Canada #2022-483 INTERIM RECALL Page 4 Models Affected: Specific model years 2020-2023 Western Star 47X a nd 4 9X v ehicles m anufactured M arch 1 8, 2 019, t hrough August 26, 2022, and equipped with Inner & Outer Bezels on the grill. IMPORTANT: Please do not order replacement parts until the vehicle is inspected and progressive damage has been determined. Only less than 1% of the vehicles will experience progressive damage needing hood bezel and grille bezel replacement. 10/17/2022 f750096 Fig. 1, Masking Tape Locations 10/17/2022 f750098 1 2 3 1. Mounting Nuts 2. Hood 3. Hood Handle Fig. 2, Hood Handle Removal Daimler Truck North America LLC Recall Campaign October 2022 INT FL951 NHTSA #22V-654 Transport Canada #2022-483 INTERIM RECALL Page 5 5. Cover the areas that need to be drilled, using masking tape. See Fig. 1. NOTE: To precisely mark the locations for drilling holes in the upper bezel, the hood handle has to be removed. 6. Remove the four mounting nuts that attach the hood handle to the hood. See Fig. 2. 7. Remove the hood handle. 9. Center punch the rivet locations, then use a 9/64-inch drill bit to drill 12 holes in the hood bezels. 10. Deburr the holes drilled in the hood bezels. 10/18/2022 f750097 All measurements are in mm. Fig. 3, Drilling Location Measurements (left-hand side bezels shown) Daimler Truck North America LLC Recall Campaign October 2022 INT FL951 NHTSA #22V-654 Transport Canada #2022-483 INTERIM RECALL Page 6 NOTICE The upper and the side bezels curve together at the upper corners. Use a straight edge to precisely mark the drilling locations. 8. Mark all the drilling locations using the measurements provided in Fig. 3. 12. Position the hood handle on the hood by inserting the handle-mounted studs into the respective holes on the hood. 13. Install the four mounting nuts. Tighten the nuts 60 lbfยทin (678 Nยทcm). 14. Clean a spot on the base label (Form WAR259) and attach a campaign completion sticker for FL951 (Form WAR260), indicating this work has been completed. 10/17/2022 f750099 Fig. 4, Rivet Locations Daimler Truck North America LLC Recall Campaign October 2022 INT FL951 NHTSA #22V-654 Transport Canada #2022-483 INTERIM RECALL Page 7 11. Install the rivets into each drilled hole. Figure 4 shows the rivets installed on the hood bezels.
**************************************************************************************************************
The information contained in this letter supercedes and supplements any related policies and procedures in any previously released bulletins, the Warranty Manual, and/or previously released letters. Failure to read or distribute this letter will not exempt addressees from compliance with the information contained herein. Page 1 of 1 Daimler Truck North America LLC REF #: ICI23-020 Effective: 05/24/2023 Release: 05/24/2023 SUBJECT: FL951-B Inspected/Repaired-FLWA This letter is to inform you that vehicles in Group B of FL951 Western Star Grill Bezel Covers recall campaign have been inspected/repaired under Interim Recall INTFL951 by a Daimler Truck North America authorized service facility and no further work is required. Vehicles in FL951B will have a FLWA009999999 claim filed against recall FL951B. If you have questions or need further information, contact the Warranty Campaigns Department by submitting an inquiry through the WSC link on the DTNA Portal. WARRANTY CAMPAIGNS DEPARTMENT P.O. Box 4090 800-547-0712 Portland, Oregon 97208-4090 ATTENTION: Dealer Principal, Warranty Manager, Service Manager, Parts Manager Freightliner Dealers โ U.S. and Canada Western Star and Sterling Dealers โ U.S. and Canada FCCC Dealers โ U.S. and Canada Thomas Built Buses Dealers โ U.S. and Canada Direct Warranty Customers โ U.S. and Canada Detroit Diesel Distributors Export Distributors If you have questions about this Letter, please submit your inquiry on the Web using the WSC Link on DTNAConnect
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-654 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Daimler Trucks North America, LLC Submission Date : OCT 06, 2022 NHTSA Recall No. : 22V-654 Manufacturer Recall No. : FL-951 Manufacturer Information : Manufacturer Name : Daimler Trucks North America, LLC Address : 4747 N. Channel Avenue Portland OR 97217-3849 Company phone : 800-745-8000 Population : Number of potentially involved : 3,513 Estimated percentage with defect : 1 % Vehicle Information : Vehicle 1 : 2020-2023 Western Star 49X Vehicle Type : Body Style : Power Train : NR Descriptive Information : On certain vehicles built within the above manufacturing date range that are equipped with Inner & Outer Bezels on the hood, the stainless steel cover on the Bezel (s) may de-bond and potentially fall off. Production Dates : MAR 20, 2019 – AUG 25, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2020-2023 Western Star 47X Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : Power Train : NR Descriptive Information : On certain vehicles built within the above manufacturing date range that are equipped with Inner & Outer Bezels on the hood, the stainless steel cover on the Bezel (s) may de-bond and potentially fall off. Production Dates : JUL 16, 2020 – AUG 25, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : The stainless steel cover on Inner & Outer Bezels on the hood may de-bond and subsequently fall off the vehicle. FMVSS 1 : NR FMVSS 2 : NR Part 573 Safety Recall Report 22V-654 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 Description of the Safety Risk : If the hood bezel(s) stainless steel covers falls during operation, it may become road debris, increasing the risk of a crash. Description of the Cause : NR Identification of Any Warning that can Occur : NR Involved Components : Component Name 1 : Hood Bezel Covers Component Description : Hood Bezel, Inner & Outer Component Part Number : A17-21894-000, A17-21893-000, A17-21893-000, A17-21893-001, A17-21894-000, A17-21894-001, A17-21894- Supplier Identification : Component Manufacturer Name : American Trim Address : 1005 West Grand Avenue Lima Ohio 45801 Country : United States Chronology : On or about March 8, 2022, DTNA was first notified through a Dealer Product Report (DPR) regarding debonding of Hood Bezel cover. On or about August 16, 2022, a Field Service Product Report (FSPR) & DPR duplicating the same issue was submitted to DTNA Compliance. DTNA promptly began an investigation that revealed that, on a specific population of vehicles built with hood Bezels, there is a possibility of the hood bezel (s) stainless steel covers de-bonding from the air intake. As part of that investigation, DTNA performed an initial warranty seek to identify any related claims not found in the prior notifications. Later in that same month, DTNAโs review became aware of 1 additional occurrence of covers de-bonding from the hood bezel(s). On August 25, 2022, out of abundance of caution, DTNA decided to conduct a voluntary safety recall on certain WST 47X and 49X vehicles built within the above mentioned manufacturing date range, that were equipped with these particular hood bezels. The summary of warranty claims, field or service reports, and other information is as follows: 4 warranty claims and 3 Field report from dates 12/17/2021 to 7/18/2022, 4 claims reporting fell off on the road. No deaths or injuries reported. On October 4, 2022, upon review of production vehicles, DTNA reasonably amended the recall population from 4,006 to 3,513. On October 6, 2022 the updates in the chronology in the 573 report were amended to match the amended defect information report. Part 573 Safety Recall Report 22V-654 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 Description of Remedy : Description of Remedy Program : Hood bezels will be removed and replaced with new parts accordingly. New hood bezels will be assembled at the supplier location, using an improved manufacturing process. Replacement will be performed by Daimler Truck North America authorized service facilities. Daimler Truck North America shall be offering a refund for owner-paid repairs covered by this recall if the repair was performed prior to the date indicated in the reimbursement plan, which will be posted with ownerโs notification letter. Owners are directed to seek reimbursement through authorized dealers. How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Description of Recall Schedule : NR Planned Dealer Notification Date : OCT 28, 2022 – OCT 28, 2022 Planned Owner Notification Date : OCT 28, 2022 – OCT 28, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-654 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Daimler Trucks North America, LLC Submission Date : AUG 29, 2022 NHTSA Recall No. : 22V-654 Manufacturer Recall No. : FL-951 Manufacturer Information : Manufacturer Name : Daimler Trucks North America, LLC Address : 4747 N. Channel Avenue Portland OR 97217-3849 Company phone : 800-745-8000 Population : Number of potentially involved : 4,006 Estimated percentage with defect : 1 % Vehicle Information : Vehicle 1 : 2020-2023 Western Star 47X Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : Power Train : NR Descriptive Information : On certain vehicles built within the above manufacturing date range that are equipped with Inner & Outer Bezels on the hood, the stainless steel cover on the Bezel (s) may de-bond and potentially fall off. Production Dates : JUL 16, 2020 – AUG 25, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2020-2023 Western Star 49X Vehicle Type : Body Style : Power Train : NR Descriptive Information : On certain vehicles built within the above manufacturing date range that are equipped with Inner & Outer Bezels on the hood, the stainless steel cover on the Bezel (s) may de-bond and potentially fall off. Production Dates : MAR 20, 2019 – AUG 25, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : The stainless steel cover on Inner & Outer Bezels on the hood may de-bond and subsequently fall off the vehicle. FMVSS 1 : NR FMVSS 2 : NR Part 573 Safety Recall Report 22V-654 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 Description of the Safety Risk : If the hood bezel(s) stainless steel covers falls during operation, it may become road debris, increasing the risk of a crash. Description of the Cause : NR Identification of Any Warning that can Occur : NR Involved Components : Component Name 1 : Hood Bezel Covers Component Description : Hood Bezel, Inner & Outer Component Part Number : A17-21894-000, A17-21893-000, A17-21893-000, A17-21893-001, A17-21894-000, A17-21894-001, A17-21894- Supplier Identification : Component Manufacturer Name : American Trim Address : 1005 West Grand Avenue Lima Ohio 45801 Country : United States Chronology : On or about March 8, 2022, DTNA was first notified through a Dealer Product Report (DPR) regarding debonding of Hood Bezel cover. On or about August 16, 2022, a Field Service Product Report (FSPR) & DPR duplicating the same issue was submitted to DTNA Compliance. DTNA promptly began an investigation that revealed that, on a specific population of vehicles built with hood Bezels, there is a possibility of the hood bezel (s) stainless steel covers de-bonding from the air intake. As part of that investigation, DTNA performed an initial warranty seek to identify any related claims not found in the prior notifications. Later in that same month, DTNAโs review became aware of 1 additional occurrence of covers de-bonding from the hood bezel(s). On August 25, 2022, out of abundance of caution, DTNA decided to conduct a voluntary safety recall on certain WST 47X and 49X vehicles built within the above mentioned manufacturing date range, that were equipped with these particular hood bezels. The summary of warranty claims, field or service reports, and other information is as follows: 4 warranty claims and 3 Field report from dates 12/17/2021 to 7/18/2022, 4 claims reporting fell off on the road. No deaths or injuries reported. Part 573 Safety Recall Report 22V-654 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 Description of Remedy : Description of Remedy Program : Hood bezels will be removed and replaced with new parts accordingly. New hood bezels will be assembled at the supplier location, using an improved manufacturing process. Replacement will be performed by Daimler Truck North America authorized service facilities. Daimler Truck North America shall be offering a refund for owner-paid repairs covered by this recall if the repair was performed prior to the date indicated in the reimbursement plan, which will be posted with ownerโs notification letter. Owners are directed to seek reimbursement through authorized dealers. How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Description of Recall Schedule : NR Planned Dealer Notification Date : OCT 28, 2022 – OCT 28, 2022 Planned Owner Notification Date : OCT 28, 2022 – OCT 28, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-654 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Daimler Trucks North America, LLC Submission Date : APR 13, 2023 NHTSA Recall No. : 22V-654 Manufacturer Recall No. : FL-951 Manufacturer Information : Manufacturer Name : Daimler Trucks North America, LLC Address : 4747 N. Channel Avenue Portland OR 97217-3849 Company phone : 800-745-8000 Population : Number of potentially involved : 3,498 Estimated percentage with defect : 1 % Vehicle Information : Vehicle 1 : 2020-2023 Western Star 47X Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : Power Train : NR Descriptive Information : On certain vehicles built within the above manufacturing date range that are equipped with Inner & Outer Bezels on the hood, the stainless steel cover on the Bezel (s) may de-bond and potentially fall off. Production Dates : JUL 16, 2020 – AUG 25, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2020-2023 Western Star 49X Vehicle Type : Body Style : Power Train : NR Descriptive Information : On certain vehicles built within the above manufacturing date range that are equipped with Inner & Outer Bezels on the hood, the stainless steel cover on the Bezel (s) may de-bond and potentially fall off. Production Dates : MAR 20, 2019 – AUG 25, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : The stainless steel cover on Inner & Outer Bezels on the hood may de-bond and subsequently fall off the vehicle. FMVSS 1 : NR FMVSS 2 : NR Part 573 Safety Recall Report 22V-654 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 Description of the Safety Risk : If the hood bezel(s) stainless steel covers falls during operation, it may become road debris, increasing the risk of a crash. Description of the Cause : NR Identification of Any Warning that can Occur : NR Involved Components : Component Name 1 : Hood Bezel Covers Component Description : Hood Bezel, Inner & Outer Component Part Number : A17-21894-000, A17-21893-000, A17-21893-000, A17-21893-001, A17-21894-000, A17-21894-001, A17-21894- Supplier Identification : Component Manufacturer Name : American Trim Address : 1005 West Grand Avenue Lima Ohio 45801 Country : United States Chronology : On or about March 8, 2022, DTNA was first notified through a Dealer Product Report (DPR) regarding debonding of Hood Bezel cover. On or about August 16, 2022, a Field Service Product Report (FSPR) & DPR duplicating the same issue was submitted to DTNA Compliance. DTNA promptly began an investigation that revealed that, on a specific population of vehicles built with hood Bezels, there is a possibility of the hood bezel (s) stainless steel covers de-bonding from the air intake. As part of that investigation, DTNA performed an initial warranty seek to identify any related claims not found in the prior notifications. Later in that same month, DTNAโs review became aware of 1 additional occurrence of covers de-bonding from the hood bezel(s). On August 25, 2022, out of abundance of caution, DTNA decided to conduct a voluntary safety recall on certain WST 47X and 49X vehicles built within the above mentioned manufacturing date range, that were equipped with these particular hood bezels. The summary of warranty claims, field or service reports, and other information is as follows: 4 warranty claims and 3 Field report from dates 12/17/2021 to 7/18/2022, 4 claims reporting fell off on the road. No deaths or injuries reported. On 08/29/2022 DTNA added Western Star 49X as additional model in portal. On October 4, 2022, upon review of production vehicles, DTNA reasonably amended the recall population from 4,006 to 3,513. On October 6, 2022 the updates in the chronology in the 573 report were amended to match the amended defect information report. On October 18, 2022, upon review of Part 573 Safety Recall Report 22V-654 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 production vehicles, DTNA reasonably amended the recall population from 3,513 to 3,498. The description of the recall schedule for notifications was also added. On 04/11/2023 DTNA amended the 573 to reflect the final remedy status. Description of Remedy : Description of Remedy Program : Grill bezel Covers will be inspected and rivets installed. The Recall will take approximately one hour and will be performed free of charge. Repair will be performed by Daimler Truck North America authorized service facilities. Daimler Truck North America shall be offering a refund for owner-paid repairs covered by this recall if the repair was performed prior to the date indicated in the reimbursement plan, which will be posted with ownerโs notification letter. Owners are directed to seek reimbursement through authorized dealers. How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Description of Recall Schedule : Customer notification will be made by first class mail using Daimler Truck North America records to determine the customers affected. Planned Dealer Notification Begin Date: 10/28/2022 Planned Dealer Notification End Date: 10/28/2022 Planned Owner Notification Begin Date: 10/28/2022 Planned Owner Notification End Date:10/28/2022 Planned Dealer Notification Date : OCT 28, 2022 – OCT 28, 2022 Planned Owner Notification Date : OCT 28, 2022 – OCT 28, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-654 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Daimler Trucks North America, LLC Submission Date : OCT 18, 2022 NHTSA Recall No. : 22V-654 Manufacturer Recall No. : FL-951 Manufacturer Information : Manufacturer Name : Daimler Trucks North America, LLC Address : 4747 N. Channel Avenue Portland OR 97217-3849 Company phone : 800-745-8000 Population : Number of potentially involved : 3,498 Estimated percentage with defect : 1 % Vehicle Information : Vehicle 1 : 2020-2023 Western Star 47X Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : Power Train : NR Descriptive Information : On certain vehicles built within the above manufacturing date range that are equipped with Inner & Outer Bezels on the hood, the stainless steel cover on the Bezel (s) may de-bond and potentially fall off. Production Dates : JUL 16, 2020 – AUG 25, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2020-2023 Western Star 49X Vehicle Type : Body Style : Power Train : NR Descriptive Information : On certain vehicles built within the above manufacturing date range that are equipped with Inner & Outer Bezels on the hood, the stainless steel cover on the Bezel (s) may de-bond and potentially fall off. Production Dates : MAR 20, 2019 – AUG 25, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : The stainless steel cover on Inner & Outer Bezels on the hood may de-bond and subsequently fall off the vehicle. FMVSS 1 : NR FMVSS 2 : NR Part 573 Safety Recall Report 22V-654 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 Description of the Safety Risk : If the hood bezel(s) stainless steel covers falls during operation, it may become road debris, increasing the risk of a crash. Description of the Cause : NR Identification of Any Warning that can Occur : NR Involved Components : Component Name 1 : Hood Bezel Covers Component Description : Hood Bezel, Inner & Outer Component Part Number : A17-21894-000, A17-21893-000, A17-21893-000, A17-21893-001, A17-21894-000, A17-21894-001, A17-21894- Supplier Identification : Component Manufacturer Name : American Trim Address : 1005 West Grand Avenue Lima Ohio 45801 Country : United States Chronology : On or about March 8, 2022, DTNA was first notified through a Dealer Product Report (DPR) regarding debonding of Hood Bezel cover. On or about August 16, 2022, a Field Service Product Report (FSPR) & DPR duplicating the same issue was submitted to DTNA Compliance. DTNA promptly began an investigation that revealed that, on a specific population of vehicles built with hood Bezels, there is a possibility of the hood bezel (s) stainless steel covers de-bonding from the air intake. As part of that investigation, DTNA performed an initial warranty seek to identify any related claims not found in the prior notifications. Later in that same month, DTNAโs review became aware of 1 additional occurrence of covers de-bonding from the hood bezel(s). On August 25, 2022, out of abundance of caution, DTNA decided to conduct a voluntary safety recall on certain WST 47X and 49X vehicles built within the above mentioned manufacturing date range, that were equipped with these particular hood bezels. The summary of warranty claims, field or service reports, and other information is as follows: 4 warranty claims and 3 Field report from dates 12/17/2021 to 7/18/2022, 4 claims reporting fell off on the road. No deaths or injuries reported. On 08/29/2022 DTNA added Western Star 49X as additional model in portal. On October 4, 2022, upon review of production vehicles, DTNA reasonably amended the recall population from 4,006 to 3,513. On October 6, 2022 the updates in the chronology in the 573 report were amended to match the amended defect information report. On October 18, 2022, upon review of Part 573 Safety Recall Report 22V-654 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 production vehicles, DTNA reasonably amended the recall population from 3,513 to 3,498. The description of the recall schedule for notifications was also added. Description of Remedy : Description of Remedy Program : Hood bezels will be removed and replaced with new parts accordingly. New hood bezels will be assembled at the supplier location, using an improved manufacturing process. Replacement will be performed by Daimler Truck North America authorized service facilities. Daimler Truck North America shall be offering a refund for owner-paid repairs covered by this recall if the repair was performed prior to the date indicated in the reimbursement plan, which will be posted with ownerโs notification letter. Owners are directed to seek reimbursement through authorized dealers. How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Description of Recall Schedule : Customer notification will be made by first class mail using Daimler Truck North America records to determine the customers affected. Planned Dealer Notification Begin Date: 10/28/2022 Planned Dealer Notification End Date: 10/28/2022 Planned Owner Notification Begin Date: 10/28/2022 Planned Owner Notification End Date:10/28/2022 Planned Dealer Notification Date : OCT 28, 2022 – OCT 28, 2022 Planned Owner Notification Date : OCT 28, 2022 – OCT 28, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-654 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Daimler Trucks North America, LLC Submission Date : OCT 04, 2022 NHTSA Recall No. : 22V-654 Manufacturer Recall No. : FL-951 Manufacturer Information : Manufacturer Name : Daimler Trucks North America, LLC Address : 4747 N. Channel Avenue Portland OR 97217-3849 Company phone : 800-745-8000 Population : Number of potentially involved : 3,513 Estimated percentage with defect : 1 % Vehicle Information : Vehicle 1 : 2020-2023 Western Star 47X Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : Power Train : NR Descriptive Information : On certain vehicles built within the above manufacturing date range that are equipped with Inner & Outer Bezels on the hood, the stainless steel cover on the Bezel (s) may de-bond and potentially fall off. Production Dates : JUL 16, 2020 – AUG 25, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2020-2023 Western Star 49X Vehicle Type : Body Style : Power Train : NR Descriptive Information : On certain vehicles built within the above manufacturing date range that are equipped with Inner & Outer Bezels on the hood, the stainless steel cover on the Bezel (s) may de-bond and potentially fall off. Production Dates : MAR 20, 2019 – AUG 25, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : The stainless steel cover on Inner & Outer Bezels on the hood may de-bond and subsequently fall off the vehicle. FMVSS 1 : NR FMVSS 2 : NR Part 573 Safety Recall Report 22V-654 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 Description of the Safety Risk : If the hood bezel(s) stainless steel covers falls during operation, it may become road debris, increasing the risk of a crash. Description of the Cause : NR Identification of Any Warning that can Occur : NR Involved Components : Component Name 1 : Hood Bezel Covers Component Description : Hood Bezel, Inner & Outer Component Part Number : A17-21894-000, A17-21893-000, A17-21893-000, A17-21893-001, A17-21894-000, A17-21894-001, A17-21894- Supplier Identification : Component Manufacturer Name : American Trim Address : 1005 West Grand Avenue Lima Ohio 45801 Country : United States Chronology : On or about March 8, 2022, DTNA was first notified through a Dealer Product Report (DPR) regarding debonding of Hood Bezel cover. On or about August 16, 2022, a Field Service Product Report (FSPR) & DPR duplicating the same issue was submitted to DTNA Compliance. DTNA promptly began an investigation that revealed that, on a specific population of vehicles built with hood Bezels, there is a possibility of the hood bezel (s) stainless steel covers de-bonding from the air intake. As part of that investigation, DTNA performed an initial warranty seek to identify any related claims not found in the prior notifications. Later in that same month, DTNAโs review became aware of 1 additional occurrence of covers de-bonding from the hood bezel(s). On August 25, 2022, out of abundance of caution, DTNA decided to conduct a voluntary safety recall on certain WST 47X and 49X vehicles built within the above mentioned manufacturing date range, that were equipped with these particular hood bezels. The summary of warranty claims, field or service reports, and other information is as follows: 4 warranty claims and 3 Field report from dates 12/17/2021 to 7/18/2022, 4 claims reporting fell off on the road. No deaths or injuries reported. Part 573 Safety Recall Report 22V-654 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 Description of Remedy : Description of Remedy Program : Hood bezels will be removed and replaced with new parts accordingly. New hood bezels will be assembled at the supplier location, using an improved manufacturing process. Replacement will be performed by Daimler Truck North America authorized service facilities. Daimler Truck North America shall be offering a refund for owner-paid repairs covered by this recall if the repair was performed prior to the date indicated in the reimbursement plan, which will be posted with ownerโs notification letter. Owners are directed to seek reimbursement through authorized dealers. How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Description of Recall Schedule : NR Planned Dealer Notification Date : OCT 28, 2022 – OCT 28, 2022 Planned Owner Notification Date : OCT 28, 2022 – OCT 28, 2022 * NR – Not Reported
SEOCONTENT-END
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.