โThis site contains affiliate links for which OEMDTC may be compensatedโ |
October 17, 2022 NHTSA CAMPAIGN NUMBER: 22V779000
Display May Freeze/FMVSS 101 & 102
The loss of display information, such as vehicle speed and warning lights, can increase the risk of a crash.
NHTSA Campaign Number: 22V779
Manufacturer PACCAR Incorporated
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 76,492
Summary
PACCAR Incorporated (PACCAR
) is recalling certain 2022-2023 Kenworth
T680, T880, W990, and Peterbilt
365, 367, 389, 567, and 579 vehicles. The digital display may freeze and not display critical safety information. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 101, “Control and Displays” and 102, “Trans Shift Lever Seq/Starter Interlock/Trans Braking Effect.”
Remedy
Dealers will update the software, free of charge. Owner notification letters are expected to be mailed December 16, 2022. Owners may contact Kenworth’s customer service at 1-425-828-5888 and Peterbilt
’s customer service at 1-940-591-4220. PACCAR
’s numbers for this recall are 22KWK and 22PBK.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
08-16-22: Engineering informed the Product Safety & Compliance department of the potential for the digital display to freeze unexpectedly. Investigation opened.
09-09-22: Additional reviews with the supplier were held, and engineering confirmed that the turn signal telltales and emissions related telltales were not affected.
09-15-22: Updated software implemented to address concern.
09-26-22: Investigation details summarized and warranty search updated. A total of 57 relevant warranty claims were identified, with build dates ranging from May 2021 through September 2022.
10-08-22: Total affected population firmed.
10-10-22: Safety committee meeting held. The committee concurs that a safety related non-compliance exists and that the affected population shall be recalled.
16 Affected Products
Vehicles
MAKE | MODEL | YEAR |
KENWORTH![]() | T680 | 2022-2023 |
KENWORTH![]() | T880 | 2022-2023 |
KENWORTH![]() | W990 | 2022-2023 |
PETERBILT![]() | 365 | 2022-2023 |
PETERBILT![]() | 367 | 2022-2023 |
PETERBILT![]() | 389 | 2022-2023 |
PETERBILT![]() | 567 | 2022-2023 |
PETERBILT![]() | 579 | 2022-2023 |
7 Associated Documents
Noncompliance Notice 573 Report
RCLRPT-22V779-6923.PDF 215.944KB
Recall 573 Report – October 18, 2022
RCLRPT-22V779-8244.PDF 215.941KB
Recall Acknowledgement
RCAK-22V779-2526.pdf 645.925KB
Recall 573 Report – October 27, 2022
RCLRPT-22V779-6326.PDF 216.003KB
Safety Bulletin
Safety Bulletin
ISSUED Owner Notification Letter(Part 577)
RCONL-22V779-3463.pdf 152.444KB
Latest Recalls Documents
Heavy Duty Truck Reprogramming
Description:
Designed for flexibility, the USB-Link 3 Wired Edition connects to your PC, tablet, or smartphone with a USB cable, allowing techs to directly connect to a device when working in the field or during signal interruptions.
Built to support the latest protocols (CAN FD, DoIP) and compatible with a wide range of OEM diagnostics software, the USB-Link 3 is our most advanced VCI to date, with the performance and technology you can rely on well into the future.
The USB-Linkโข 3 comes with the following:
- Latching USB Cable (PN 404032)
- 9-Pin Deutsch Adapter, 1 Meter (PN 493128)
- J1962 Adapter (16-Pin OBD II, 1 Meter (PN 491113)
The USB-Linkโข 3: Wireless is also available (PN 121052).
Specifications
Vehicle Network Protocol Support
CAN FD / J1939 FD / ISO15765 FD - 250K, 500K, 1M b/s with auto baud detection
Single wire CAN (SWCAN)
ISO 11898-3 Fault Tolerant CAN (FTCAN)
Diagnostics Over Internet Protocol (DoIP)
J1708
J1850 VPW (Class 2)
ISO PWM (SCP)
ISO 9141 / KWP2000 (ISO 14230) K/L line
ALDL 9600 and 8192 baud
ATEC 160 baud
Windowsยฎ Vehicle Communication API
Windowsยฎ Vehicle Communication API
RP1210 a/b/c
J2534 (2004 draft)
J2534-1 partial implementation (commercial vehicle focused)
Operating System Compatibility
iOS
Androidโข
Windowsยฎ 10, 11
Interfaces to Computing Platforms
USB 2.0 (vehicle-to-PC connectivity)
Bluetoothยฎ 2.1 + EDR
Wi-Fi (dual band)
Compatible Software
Detroit Diesel Diagnostic Link
CAT Electronic Technician (On-Highway only)
Cummins Insite
International - ServiceMAXX Fleet Pro
Hino eXplorer
Volvo PTT
VCAD Elite Mack/Volvo
V-MAC Service Tools
Allison DOCยฎ For PC-Service Tool - Protocols Supported: J1939, J1708/J1587, and J1850
Allison DOCยฎ For Fleets (1000/2000) - Protocols Supported: J1939, J1850
Allison DOCยฎ For Fleets (3000/4000) - Protocols Supported: J1939, J1708/J1587
Eaton ServiceRanger
Bendix ACom
WABCO Toolbox
Freightliner ServiceLink
International ABS
International DLB
International Intune
International IPC v2.02
PACCAR DAVIE4
![]() |
Diesel Laptops Nexiq USB Link 3 Wireless Edition with Repair Information & Diagnostic Software |
![]() |
Diesel Laptops Nexiq USB Link 3 Wired Edition with Repair Information & Diagnostic Software |
Nexiq Blue-Link Mini Product Numberย NQ126015 Nexiq Blue Link Miniโข Vehicle Communication Interface |
![]() |
NEXIQ Technologies 124032 USB-Link 2 Connector |
![]() |
Dearborn DPA5 Pro Universal RP1210 Protocol Adapter |
Daimler Truck
DiagnosticLink Order Site:
DiagnosticLink Direct Link:
https://diagnosticlink.nexiq.com/DTNA/Default.aspx
- ใExtensive CompatibilityใAfter the upgrade, the compatibility is wider and more accurate! HD601 heavy duty truck scanner supports all major truck models that comply with standard protocols (SAE J1939, SAE J1708, ISO 14230-4, ISO 15764-4 and ISO 9141-2, ISO 27145-4 and Euro6). Fits for Cummins
, Paccar
, Detroit, Perkins, Freightliner
, International
, Peterbilt
, Ford
, Class 4-Class 8 trucks, etc. It also check engine diagnosis on most cars, minivans and light trucks
- ใ Full System DiagnosticใHD601 Diesel Scanner supports all system scans of heavy trucks compliant with standard protocols SAE J1939 & J1708, such as Engine, ABS
, Transmission, Braking System, ESP, EPS, Fuel System, etc, It is a great scan tool fits for Cummins
, Caterpillar
, Detroit, Perkins, Maxxforce, Bendix
,Wabash
, Wabaco, Haldex
, Allison, Eaton
heavy trucks, With this truck tool, you can get deep analysis data about the system and do some repairs by yourself, saving much time and money
- ใEnhanced Diesel OBD ScannerใThe HD601 Diesel OBD Scanner offers unparalleled diagnostic capabilities for heavy-duty trucks. Beyond code reading, clearing, and live data display, it retrieves vehicle information, freeze frames, and DTCs. With 6, 9, and 16 pin cables, it ensures compatibility with various engines. This scanner's real-world testing prowess ensures comprehensive support for a wide array of heavy-duty truck engines, making it an indispensable tool for truck diagnostics
- ใDTC Libraryใ+ใLife Time Free UpdateใThe built-in DTC library allows you to retrieve the codes directly without searching for the definition in the book. Whether you are a professional mechanic or a DIY car owner, HD601 diesel scanner explains the existing problem, makes it easier for you to understand the codes definition and fix the problem faster. Plus, you get a lifetime free internet updates, so you always have the latest software for diagnostics in English and Spanish languages
- ใFriendly Design, Easy of UseใThis scanner is plug and play, simple and convenient, and very friendly for beginners. With improved buttons for easy menu navigation. The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work.
- ใDiesel EnginesใHD500 heavy duty truck scanner is tailored to vehicles equipped with cummins
, cat, detroit, paccar
, international
, hino and more engines. This diesel scan tool come with diverse adapters, including diesel 6 & 9 pin, CAT-9 pin, CAT-14 pin, 16 pin cable. It is engineered to deliver accurate and reliable diagnostics, ensuring compatibility and effective troubleshooting for your trucks. Tip: If your truck fault code is factory custom protocol, please enter the diagnostic menu, and then select the corresponding engine to test, so that your test data will be more accurate.(Please note that the HD500 does not have bidirectional and VGT calibration.)
- ใAdvanced DPF ManagementใThe longer a truck is in use, the more particles accumulate in the D.P.F and the more the D.P.F becomes clogged, affecting engine performance and emissions efficiency. This HD500 diesel scanner provides you with DPF regeneration, D.P.F reset, DPD, DPR status control and more functions to achieve efficient cleaning, optimise engine performance and prolong D.P.F life. Save maintenance costs by avoiding D.P.F replacement through regular D.P.F cleaning and D.P.F regeneration. All made easy with the HD500. Warm tips: the HD500 can't do dpf function on Isuzu
.
- ใCylinder Cut-off ServicesใThe cylinder cut-off test can diagnose engine failure problems. The HD500 heavy duty truck scan tool sends a command to the ECU to cut off the injector of a cylinder to check if the injector of that cylinder is not working properly. If the engine speed drops more, the better the cylinder works; if the speed drop is not obvious or does not drop then the cylinder may be faulty; touch the high-pressure pipe between the common rail tube to the injector with your hand, the stronger the pulsation, the better the injection effect. This diesel scanner provides clear guidance for maintenance.
- ใSpeed Limit Reset & ABS
ใLimit setting enables you can check and set the engine speed and the vehicle road speed limit when the vehicle is stationary, which ensures driving safety. And this diesel scanner also can make you achieve a firm brake pedal by removing air from the ABS
module. HD500 truck scanner helps you maintain commercial vehicle breakdowns at all times, saving you money efficiently and winning more business for you! Please note that the adjust the speed limit is supported by fewer vehicles (eg: the cummins
engine cannot support speed limit adjust), please confirm the vehicke VIN with us before purchase.
- ใAccess All Major Systems with EaseใThe HD500 heavy duty scanner truck diesel provides full diagnostic capabilities, covering the engine, ABS
, SRS, EPB, Park Brake Controller, DPF, etc. Comes with full HD OBD/EOBD/ OBD2 service modes, including read codes, erase codes, live data, etc. Allows you to quickly identify issues and perform necessary solutions.
- ใ2025 NEWEST LAUNCH 1st Advanced Scan Tool Compatible With 12V&24V VehiclesใDesign for Passenger&Commercial Vehicles 2 in1,work for Cars/Trucks/buses/trailers/excavators/diesel engine/pick-up/etc.
- ใJ2534 Reprogramming with Smartlink CใAdvanced OEM J2534 reprogramming,Helps access direct data online, replace existing software/firmware in ECU,program new ECUs and fix software-controlled issue.
- ใOver 60 Service Reset Functions + Bi-Directional + ECU Coding ใThis scan tool can support ECU Coding,60+ reset service functions like SAS/EPB/TPMS/DPF/Oil/Brake/ABS
Bleed, Injector coding, etc.
- ใ2025 BEST Advanced Hardware & All Systems Diagnosis+Topology Display ใSupport All systems Diagnostic including ENG, AT, ECM, TCM, ABS
, SRS, BCM, BMS, TPMS, SAS, Fuel System, Light System and more.
- ใWider Vehicle Coverage of 12V & 24V Vehicles + 25 LanguagesใLAUNCH X431 PRO3S+SMARTLINK HD automotive scanner is ALL-IN-ONE Scan Tool for 12V cars and 24V Heavy-duty trucks support CANFD & DOIP.
- ๐ฅ๐ฅ๐ฅ2025 New Functions Making X7 HD the Top Dog - Big Surprise!!! ANCEL X7 HD truck scanner 10 major functional advantages .โ >Full HDOBD/OBD2 Function โ >ALL System Diagnostic โ >42+ Reset Function โ >Active Test / Bi-Directional Controlโ >ECU Codingโ >Graphing Live Dataโ >Wide Compatibility โ >2 Yrs Free Updateโ >Remote Operationโ >Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: โ >6000 mAhโ >10.1 inch Tabletโ >2G RAMโ >32G ROM (Expandable to 128GB)โ >Data Record & Replay & Printโ >Android 10.0โ >Bluetooth 5.0 & Wifiโ >14 Languages
- ๐OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7 HD diesel scanner diagnostic tool not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABS
Automatically. Moreover, it features TPMS activation, cylinder cut-off and learning functions.
- ๐Advanced ECU Coding & Programming - ANCEL X7 HD 10.1inch truck scanner diagnostic tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility.
- ๐42+ Reset Functions & Bidirectional Control - 2025 newest top heavy duty truck scan tool, comes with 42+ special services (ECU, Speed Limit and Idle Reset, Oil Reset, Injector Coding, EPB, ABS
, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance. Please send your VIN# to our ๐ amazon@anceltech.com ๐ to check compatibility.
- ๐10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7 HD diesel truck scan tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABS
, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc.
- WHY NEXAS NL102+ Diagnostic Tool: Compared with many other heavy duty truck scanner, NL102+ diagnostic tool has more comprehensive diagnostic capabilities, supporting all system diagnostics for all major trucks that comply with standard protocols and full OBD2 functionality. In addition to read/clear codes, displaying live data, it also supports retrieving vehicle information, freezing frames, and DTC lookup. NL102+ OBD2 scanner comes with 6-pin, 9-pin, 16-pin connectors are available to ensure compatibility with a wide range of trucks. You'll get f-ree updates for life, so you always have the latest diagnostic software in English, Spanish and French
- Wide Compatibility: The NEXAS NL102+ heavy duty truck diagnostic scanner is compatible with all heavy-duty trucks that adhere to standard protocols (J1587, J1939, J1708). It covers a wide range of vehicle models, including Cummins
, Detroit, Caterpillar
, Freightliner
, International
, Kenworth
, John Deere, Peterbilt
, Sterling, Mack
, Paccar
, Western Star
, Mercedes-Benz
, Volvo
, Scania, MAN, Renault, ERF, Foden, Seddon-Atkinson, Iveco, DAF, SISU, STEYR, and ISUZU
. Additionally, it supports 10 modes of OBD testing for complete diagnostics and battery voltage monitoring on passenger cars and light vehicles (from Europe, America, and Asia) manufactured after 1996
- Save Up to Hundreds Money for All Heavy Duty Trucks: NEXAS NL102+ diesel scan tool supports accurate full system scanning for all heavy-duty trucks that comply with standard protocols (J1587, J1939, and J1708). This includes vehicle systems such as the engine, transmission, instrument panel, drivetrain, brake system, suspension, ABS
, ESP, EPS, fuel system, etc. The diagnostic scan tool communicates with the vehicle's computer to retrieve data stream information, allowing it to accurately pinpoint issues. This reduces the waste caused by blind part replacements, saving your time and hundreds or thousands of money
- All OBD2 Function & Battery Health Monitoring: Compared with other products on the market that only support partial OBD2 functions, this OBD2 scanner supports all OBD2 functions: read/clear codes, live data, freeze frame data, I/M readiness, EVAP test, on-board monitor, O2 sensor test, vehicle information, and DTC lookup, this providing more analysis basis for professional technicians. By regularly detecting the status of the vehicle battery with NL102+ OBD scan tool, it helps to take measures before the battery completely fails to avoid the situation that the vehicle suddenly fails to start. It can accurately diagnose the battery's condition thus saving on repair costs
- Plug and Play & One-click for DTC: NEXAS NL102+ diesel scanner is user-friendly. It comes with an intuitive screen and easy-to-understand interface, making it accessible even for non-professionals to get started. And the built-in DTC library in the code reader allows you to directly retrieve codes without searching for definitions in books, making it easier to understand the code definitions and solve problems more quickly
- ใWide CompatibilityใHD430 supports 12V 24V trucks, equipped with diesel connectors (CAT-9, Diesel 6pin & 9pin) and OBDII 16pin, with strong truck adaptation and compatibility. Product supports SAE J1939, SAE J1708, SAE J1850 PWM, SAE J1850 VPW, ISO 14230-4, ISO 9141-2, ISO 15765-4, ISO 27145-4 truck protocols, provides complete scan & fast scan, and available in English and Spanish, it is suitable for DIY enthusiasts, old-school mechanics, truck owners or small repair shops.
- ใ D.P.F Regen For Cunmmis & Caterpillar
ใHD430 supports Cummins
and Caterpillar
engines for D.P.F reset & regeneration, helping to remove diesel particles from truck D.P.F & meet maintenance schedules, thereby avoiding fault codes, maintaining engine performance, and extending DPF & truck life. Even if you aren't a professional mechanic, you can easily perform D.P.F regen using HD430 according to clear instructions, which can help your truck avoid roadside obstacles while reducing your repair time & cost. โNote: Not compatible with pickups.
- ใDiesel Full System Diagnostic ToolใHD430 has excellent diagnostic performance, quickly scanning truck systems, detecting truck faults, while supporting the engine, ABS
, transmission, fuel system and more. Read the fault code and DTC Lookup help you understand the cause of the fault, quickly clear the fault code after maintenance, so provide you with good maintenance assistance and convenience. HD430 heavy duty truck scanner will provide efficient, fast scanning of your truck system.
- ใEnhanced Diesel & Gasoline ScannerใHD430 has full HD OBD/EOBD/OBDII functions and supports heavy duty trucks with Cummins
, Caterpillar
, Detroit and Paccar
engines. In addition to read & clear fault codes, view live data, ECUs, vehicle information, it also supports functions such as freeze frame, I/M readiness, on-board monitor test, etc. At the same time, the built-in DTC Lookup can help you quickly query and understand the specific definition of the fault code & solve the problem, providing strong support & convenience for your vehicle maintenance.
- ใAdvanced Hardware & Designใ4.3-inch screen, 8G memory, 8G TF, 2.4G Wifi & other hardware, your truck repair process will be more stable. Wifi Lifetime Free Update, you can always keep up with the latest diagnostic functions and optimized performance of HD430, compared with others, you can avoid expensive update subscription fees. The imperial conversion to meet your needs for the use of the unit of measurement. Unique horizontal screen button design, your operation will be more comfortable and convenient.
SEOCONTENT-START
22PBK – Digital Display Freeze NHTSA #22V779, TC #2022-591 Number 22PBK Supplier Stoneridge Description 22PBK – Digital Display Freeze NHTSA #22V779, TC #2022-591 Date 11/1/2022 Whatโs New Non-Compliance Recall – Clone The 15-inch digital display may freeze without warning. The screen is non-responsive and can be reset only by a key cycle, battery disconnect, or re-programming, which may increase the risk of a crash. Affected vehicles fail to comply with FMVSS/CMVSS Nos. 101, 108, 121, and 136. Introduction Loss of speedometer, and/or other functionality such as warnings, indicators, and gauges. Display freeze may cause loss of visibility to vehicle speed and/or other warnings that appear on the display while the vehicle is in operation. Situation 42,317 (38,599 US / 3,718 Canada) Model Year 2022-2023 365, 367, 389, 567, and 579 chassis built from February 15, 2021, through September 8, 2022, and equipped with a 15-inch digital display. Resolution This bulletin will be updated when the repair procedure and parts are available. Federal Law It is a violation of Federal law for a dealer to sell or lease new vehicles covered by this recall until the defect or noncompliance has been corrected. Links Authored by D. Cook
**************************************************************************************************************
๎ ๎ฃ 22PBK – Digital Display Freeze NHTSA #22V779, TC #2022-591 Number 22PBK Description 22PBK – Digital Display Freeze NHTSA #22V779, TC #2022-591 Date 11/1/2022 Whatโs New Non-Compliance Recall – The repair procedures are now available. The 15-inch digital display may freeze without warning. The screen is non-responsive and can be reset only by a key cycle, battery disconnect, or re-programming, which may increase the risk of a crash. Affected vehicles fail to comply with FMVSS/CMVSS Nos. 101, 108, 121, and 136. Introduction Loss of speedometer, and/or other functionality such as warnings, indicators, and gauges. Display freeze may cause loss of visibility to vehicle speed and/or other warnings that appear on the display while the vehicle is in operation. Situation 42,317 (38,599 US / 3,718 Canada) Model Year 2022-2023 365, 367, 389, 567, and 579 chassis built from February 15, 2021, through September 8, 2022, and equipped with a 15-inch digital display. Federal Law It is a violation of Federal law for a dealer to sell or lease new vehicles covered by this recall until the defect or noncompliance has been corrected. Warranty There is no time or mileage limit for this recall. Peterbilt will pay for parts at dealer net plus applicable mark up and labor: โข 0.5 hours labor to process a PVP ๏ฌle, program the Digital Display and VECU software with DAVIE4. Use Quick Claim Code 22PBKA. โข 0.4 hours labor to process a PVP ๏ฌle, and program VECU software only with DAVIE4. (If Digital Display is found to be at the most current software level). Use Quick Claim Code 22PBKB. โข 0.3 hours labor to process a PVP ๏ฌle and verify software levels of both Digital Display and VECU. If both the Digital Display and the VEC software are found to be at the most current levels, no programming is required. Use Quick Claim Code 22PBKC. PRWS CLAIM CODING Campaign Code: Claim Category: Customer Concern Code Corrective Action Code Failure Location Supplier Code 22PBK Truck 173 23 003- 006- 001 Campaign Type Repair Type Causal Code Responsibility Code: Causal Part SRT Code Non-Compliance Recall Campaign Proactive 51 Campaign Q97-6022 B22-PKA – 0.5 hours labor to process a PVP file, program the Digital Display and VECU software with DAVIE4. B22-PKB – 0.4 hours labor to process a PVP file, and program VECU software only with DAVIE4. (If Digital Display is found to be at the most current software level). B22-PKC – 0.3 hours labor to process a PVP file and verify software levels of both Digital Display and VECU. If both the Digital Display and the VECU software are found to be at the most current levels, no programming is required. Procedure Please follow your dealership’s safety procedures and precautions to ensure the vehicle can be safely repaired and maintained. See attached procedure in Links section. Parts No parts โ running PVP and performing software updates only. Links 22PBK – Chassis List 22PBK Repair Procedure 22PBK U.S. Final customer letter 22PBK Canada Final customer letter Authored by D. Cook Revision History 11/22/2022 – Revised from Interim to Final bulletin.
**************************************************************************************************************
Our records indicate that these vehicles are affected by 22PBK and are owned by December 15, 2022 Subject: Non-Compliance Recall: 22PBK – Digital Display Freeze NHTSA: #22V779 EXPIRATION DATE: NONE This notice applies to your vehicle. Your VIN(s) can be found on the bottom or back of this page. Dear Peterbilt Customer, This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Peterbilt
has decided that certain 2022 through 2023 Model Year 365, 367, 389, 567, and 579 chassis built during 02/15/2021 through 09/08/2022 fail to conform to Federal Motor Vehicle Safety Standard (“FMVSS”) No. 101 – Controls and Displays; FMVSS No. 108 – Lamps, Reflective Devices, and Associated Equipment; FMVSS No. 121 – Air Brake Systems; and FMVSS No. 136 – Electronic Stabilty Control Systems for Heavy Vehicles. The 15-inch digital display may freeze without prior indication, and can be reset only by a key cycle, battery disconnect, or re-programming, which may increase the risk of a crash. What is the problem? The 15-inch digital display may freeze without prior indication. What will your dealer do? Updates to various chassis software depending on current update status. What should you do? Please contact your Peterbilt
dealer to schedule this repair. Peterbilt
Motors Company has initiated this recall to remedy the issue at no charge to you. Your dealer may update the chassis PVP, and/or VECU, and/or digital display software, depending on what is needed. Please contact your Peterbilt
dealer to schedule an appointment for these services. To find your Peterbilt
dealer, please visit the Dealer Locator at www.Peterbilt.com or scan the QR code. When contacting your Peterbilt
dealer, reference the Safety Recall number and the NHTSA number. This repair may take up to 1 hour of labor depending on dealer scheduling. If you require further information about this recall, reimbursement of a pre-notification remedy associated with this recall, or experience any difficulty in making arrangements for this repair, please contact: Peterbilt
Motors Company, 1700 Woodbrook St, Denton, TX 76205, Attn: Customer Service Department. If you conclude that Peterbilt
has not enabled you to remedy this defect in a reasonable time and without charge, you may submit a complaint to: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, S.E., Washington, DC 20590, or call the toll free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov. Federal regulation requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. If you no longer own this vehicle, we would appreciate your advising us of the new owner. Please send all known ownership and address changes to PBDiv.Warranty.Docs@paccar.com. We apologize for any inconvenience this preventive procedure may cause and thank you for your participation in helping Peterbilt
provide the highest levels of customer satisfaction and service expertise. We value your business and appreciate your ongoing loyalty to Peterbilt
and its dealer network. Industry-leading quality, performance and reliability are hallmarks of Peterbilt
products, and we thank you for making Peterbilt
your truck of choice. Sincerely, Michelle Ponsonby Director of Customer Service Peterbilt
Motors Company IMPORTANT NON-COMPLIANCE RECALL Scan this QR code to open the Peterbilt
Dealer Locator. AHEEEHA CJDHENJNDLEFJHIDO AHEEEHA BNFFFNB MGAOALIKAKBON M A BNFFFNB FOBAOCFH DFNHJDGCCBKADJAGMAINALAB ALLJFHFHEBDIANDGHJ EJOHGEGMKHBMD IEMDMFED JNMCEJHOE AFCDOGANADFML MFOEDEFHMLGBKOEIDLMLBDNJENIEOCHFI MFFNFNE ACOBBOMLCEMI KDMAHFHACOO A BBB A JCLKDADFBCG JHDAAFEAGNHHC HHHHHHH HH H H HH H H H H H H
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-779 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : PACCAR Incorporated Submission Date : OCT 18, 2022 NHTSA Recall No. : 22V-779 Manufacturer Recall No. : 22KWK and 22PBK Manufacturer Information : Manufacturer Name : PACCAR Incorporated Address : 777 106TH AVENUE NORTHEAST BELLEVUE WA 98004 Company phone : 940 591 4220 Population : Number of potentially involved : 76,492 Estimated percentage with defect : 1 % Vehicle Information : Vehicle 1 : 2022-2023 Kenworth T680 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : FEB 15, 2021 – SEP 15, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2022-2023 Kenworth
T880 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : FEB 15, 2021 – SEP 15, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 3 : 2022-2023 Kenworth
W990 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : FEB 16, 2021 – SEP 14, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 22V-779 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 Vehicle 4 : 2022-2023 Peterbilt
Model 365 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : JUL 13, 2021 – AUG 30, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 5 : 2022-2023 Peterbilt
Model 367 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : JUL 13, 2021 – AUG 29, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 6 : 2022-2023 Peterbilt
Model 389 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : FEB 16, 2021 – SEP 15, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 7 : 2022-2023 Peterbilt
Model 567 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : FEB 15, 2021 – SEP 15, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 8 : 2022-2023 Peterbilt
Model 579 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : FEB 16, 2021 – SEP 15, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 22V-779 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 Description of Noncompliance : Description of the Noncompliance : The display may freeze, resulting in an inability for information to be updated. FMVSS 1 : 101 – Control and displays FMVSS 2 : 102 – Trans shift lever seq/starter interlock/trans braking effect Description of the Safety Risk : Loss of current indicators and warnings, such as the speedometer and telltales, may increase the risk of a crash. Description of the Cause : The software did not properly handle errata. Identification of Any Warning that can Occur : None. Involved Components : Component Name 1 : DISPLAY-DRIVER INFO 15IN Component Description : 15inch Digital Display Component Part Number : Q43-1180, Q43-1195, Q43-1200, Q43-1202, Q43-6085, Q43-6090, Q43-6104 Supplier Identification : Component Manufacturer Name : Stoneridge Address : 39675 Mackenzie Drive Suite 400 Novi Michigan 48377 Country : United States Chronology : 08-16-22: Engineering informed the Product Safety & Compliance department of the potential for the digital display to freeze unexpectedly. Investigation opened. 09-09-22: Additional reviews with the supplier were held, and engineering confirmed that the turn signal telltales and emissions related telltales were not affected. 09-15-22: Updated software implemented to address concern. 09-26-22: Investigation details summarized and warranty search updated. A total of 57 relevant warranty claims were identified, with build dates ranging from May 2021 through September 2022. 10-08-22: Total affected population firmed. 10-10-22: Safety committee meeting held. The committee concurs that a safety related non-compliance exists Part 573 Safety Recall Report 22V-779 Page 4 The information contained in this report was submitted pursuant to 49 CFR ยง573 and that the affected population shall be recalled. Description of Remedy : Description of Remedy Program : Paccar will notify owners and dealers, and affected vehicles will have the software updated. Owners who incurred costs to obtain a remedy for the problem addressed in the recall in advance of receiving notification may seek reimbursement through the process outlined in the general reimbursement plan on file. How Remedy Component Differs from Recalled Component : Remedy components have an updated software version installed. Identify How/When Recall Condition was Corrected in Production : An updated software version implemented on September 15, 2022. Recall Schedule : Description of Recall Schedule : Customers will be notified within 60 days. Planned Dealer Notification Date : DEC 16, 2022 – DEC 16, 2022 Planned Owner Notification Date : DEC 16, 2022 – DEC 16, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-779 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : PACCAR Incorporated Submission Date : OCT 17, 2022 NHTSA Recall No. : 22V-779 Manufacturer Recall No. : 22KWK and 22PBK Manufacturer Information : Manufacturer Name : PACCAR Incorporated Address : 777 106TH AVENUE NORTHEAST BELLEVUE WA 98004 Company phone : 940 591 4220 Population : Number of potentially involved : 76,490 Estimated percentage with defect : 1 % Vehicle Information : Vehicle 1 : 2022-2023 Kenworth T680 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : FEB 15, 2021 – SEP 15, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2022-2023 Kenworth T880 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : FEB 15, 2021 – SEP 15, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 3 : 2022-2023 Kenworth W990 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : FEB 16, 2021 – SEP 14, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 22V-779 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 Vehicle 4 : 2022-2023 Peterbilt Model 365 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : JUL 13, 2021 – AUG 30, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 5 : 2022-2023 Peterbilt Model 367 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : JUL 13, 2021 – AUG 29, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 6 : 2022-2023 Peterbilt Model 389 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : FEB 16, 2021 – SEP 15, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 7 : 2022-2023 Peterbilt Model 567 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : FEB 15, 2021 – SEP 15, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 8 : 2022-2023 Peterbilt Model 579 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : FEB 16, 2021 – SEP 15, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 22V-779 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 Description of Noncompliance : Description of the Noncompliance : The display may freeze, resulting in an inability for information to be updated. FMVSS 1 : 101 – Control and displays FMVSS 2 : 102 – Trans shift lever seq/starter interlock/trans braking effect Description of the Safety Risk : Loss of current indicators and warnings, such as the speedometer and telltales, may increase the risk of a crash. Description of the Cause : The software did not properly handle errata. Identification of Any Warning that can Occur : None. Involved Components : Component Name 1 : DISPLAY-DRIVER INFO 15IN Component Description : 15inch Digital Display Component Part Number : Q43-1180, Q43-1195, !43-1200, Q43-1202, Q43-6085, Q43-6090, Q43-6104 Supplier Identification : Component Manufacturer Name : Stoneridge Address : 39675 Mackenzie Drive Suite 400 Novi Michigan 48377 Country : United States Chronology : 08-16-22: Engineering informed the Product Safety & Compliance department of the potential for the digital display to freeze unexpectedly. Investigation opened. 09-09-22: Additional reviews with the supplier were held, and engineering confirmed that the turn signal telltales and emissions related telltales were not affected. 09-15-22: Updated software implemented to address concern. 09-26-22: Investigation details summarized and warranty search updated. A total of 57 relevant warranty claims were identified, with build dates ranging from May 2021 through September 2022. 10-08-22: Total affected population firmed. 10-10-22: Safety committee meeting held. The committee concurs that a safety related non-compliance exists Part 573 Safety Recall Report 22V-779 Page 4 The information contained in this report was submitted pursuant to 49 CFR ยง573 and that the affected population shall be recalled. Description of Remedy : Description of Remedy Program : Paccar will notify owners and dealers, and affected vehicles will have the software updated. Owners who incurred costs to obtain a remedy for the problem addressed in the recall in advance of receiving notification may seek reimbursement through the process outlined in the general reimbursement plan on file. How Remedy Component Differs from Recalled Component : Remedy components have an updated software version installed. Identify How/When Recall Condition was Corrected in Production : An updated software version implemented on September 15, 2022. Recall Schedule : Description of Recall Schedule : Customers will be notified within 60 days. Planned Dealer Notification Date : DEC 16, 2022 – DEC 16, 2022 Planned Owner Notification Date : DEC 16, 2022 – DEC 16, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-779 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : PACCAR Incorporated Submission Date : OCT 27, 2022 NHTSA Recall No. : 22V-779 Manufacturer Recall No. : 22KWK and 22PBK Manufacturer Information : Manufacturer Name : PACCAR Incorporated Address : 777 106TH AVENUE NORTHEAST BELLEVUE WA 98004 Company phone : 940 591 4220 Population : Number of potentially involved : 74,730 Estimated percentage with defect : 1 % Vehicle Information : Vehicle 1 : 2022-2023 Kenworth T680 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : FEB 15, 2021 – SEP 08, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2022-2023 Kenworth T880 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : FEB 15, 2021 – SEP 08, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 3 : 2022-2023 Kenworth W990 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : FEB 16, 2021 – SEP 01, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 22V-779 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 Vehicle 4 : 2022-2023 Peterbilt Model 579 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : FEB 16, 2021 – SEP 02, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 5 : 2022-2023 Peterbilt Model 367 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : JUL 13, 2021 – AUG 29, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 6 : 2022-2023 Peterbilt Model 389 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : FEB 16, 2021 – SEP 02, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 7 : 2022-2023 Peterbilt Model 567 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : FEB 15, 2021 – SEP 02, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 8 : 2022-2023 Peterbilt Model 365 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Affected vehicles include a 15inch digital display and certain software versions. Production Dates : JUL 13, 2021 – AUG 30, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 22V-779 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 Description of Noncompliance : Description of the Noncompliance : The display may freeze, resulting in an inability for information to be updated. FMVSS 1 : 101 – Control and displays FMVSS 2 : 102 – Trans shift lever seq/starter interlock/trans braking effect Description of the Safety Risk : Loss of current indicators and warnings, such as the speedometer and telltales, may increase the risk of a crash. Description of the Cause : The software did not properly handle errata. Identification of Any Warning that can Occur : None. Involved Components : Component Name 1 : DISPLAY-DRIVER INFO 15IN Component Description : 15inch Digital Display Component Part Number : Q43-1180, Q43-1195, Q43-1200, Q43-1202, Q43-6085, Q43-6090, Q43-6104 Supplier Identification : Component Manufacturer Name : Stoneridge Address : 39675 Mackenzie Drive Suite 400 Novi Michigan 48377 Country : United States Chronology : 08-16-22: Engineering informed the Product Safety & Compliance department of the potential for the digital display to freeze unexpectedly. Investigation opened. 09-08-22: Updated software implemented to address concern. 09-09-22: Additional reviews with the supplier were held, and engineering confirmed that the turn signal telltales and emissions related telltales were not affected. 09-26-22: Investigation details summarized and warranty search updated. A total of 57 relevant warranty claims were identified, with build dates ranging from May 2021 through September 2022. 10-08-22: Total affected population firmed. 10-10-22: Safety committee meeting held. The committee concurs that a safety related non-compliance exists Part 573 Safety Recall Report 22V-779 Page 4 The information contained in this report was submitted pursuant to 49 CFR ยง573 and that the affected population shall be recalled. Description of Remedy : Description of Remedy Program : Paccar will notify owners and dealers, and affected vehicles will have the software updated. Owners who incurred costs to obtain a remedy for the problem addressed in the recall in advance of receiving notification may seek reimbursement through the process outlined in the general reimbursement plan on file. How Remedy Component Differs from Recalled Component : Remedy components have an updated software version installed. Identify How/When Recall Condition was Corrected in Production : An updated software version implemented on September 8, 2022. Recall Schedule : Description of Recall Schedule : Customers will be notified within 60 days. Planned Dealer Notification Date : DEC 16, 2022 – DEC 16, 2022 Planned Owner Notification Date : DEC 16, 2022 – DEC 16, 2022 * NR – Not Reported
SEOCONTENT-END
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.