| “This site contains affiliate links for which OEMDTC may be compensated” |
May 4, 2023 NHTSA CAMPAIGN NUMBER: 23V318000
Rear Caliper Bolts Not Tightened Correctly
A damaged wheel can result in a loss of tire pressure. A damaged brake line can cause a brake fluid
leak and reduce brake performance. Either condition increases the risk of a crash.
NHTSA Campaign Number: 23V318
Manufacturer Jayco, Inc.
Components SERVICE BRAKES, HYDRAULIC
Potential Number of Units Affected 63
Summary
Jayco, Inc. (Jayco) is recalling certain 2023-2024 Entegra Emblem, Vision, Vision XL, Jayco Alante, Precept, and Precept Prestige motorhomes, built on Ford F-53 chassis. The rear brake caliper attachment bolts may not be tightened correctly, which can allow the caliper to loosen and possibly damage the wheel or brake lines.
Remedy
Jayco will notify owners, and Ford dealers will inspect and tighten the rear caliper bolts, as necessary, free of charge. In addition, any damaged bolts will be replaced, free of charge. Owner notification letters were mailed June 2, 2023. Owners may contact Jayco customer service at 1-800-283-8267.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
Please refer to Ford’s chronology on 23V-164.
Ford is not aware of any warranty or field reports related to this condition. Ford is not aware of any reports of accident or injury related to this condition. March 31, 2023 Jayco Inc. received an official notice regarding Ford Safety Recall Notice 23S11/ NHTSA Recall 23V164. April 3, 2023 Jayco’s Warranty Incident Review Committee (WIRC) reviewed the incident and elevated it to the Corrective Preventive Action Committee (CPAC). On April 5, 2023 CPAC decided to elevate the incident to the Safety Steering Committee (SSC). On April 27, 2023 SSC voted to proceed with a pass through chassis recall.
Safety Recall 23S11 Rear Axle Caliper Bolt Torque Inspection – 2022 Ford
12 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| ENTEGRA | EMBLEM | 2023-2024 |
| ENTEGRA | VISION | 2023-2024 |
| ENTEGRA | VISION XL | 2023-2024 |
| JAYCO | ALANTE | 2023-2024 |
| JAYCO | PRECEPT | 2023-2024 |
| JAYCO | PRECEPT PRESTIGE | 2023-2024 |
2 Associated Documents
Defect Notice 573 Report
RCLRPT-23V318-9516.PDF 215.572KB
Loading...
Reload document 
Open in new tab
Recall Acknowledgement
RCAK-23V318-2238.pdf 646.078KB
Loading...
Latest Recalls Documents
- PRECISION - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.
- DURABLE - Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
- LONG-LASTING - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.
- PERFORMANCE - Features an easy-to-read, highlighted yellow print dual-range scale. Identify the markings even in low-light conditions.
- COMFORTABLE - Comes with a reversible ratchet head that drives in both directions and measure torque in a clockwise direction.
- Durable Ratchet Head: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V) Corrosion-Retardant: Satin Finish. Made in Taiwan
- Easy Storage: A sturdy plastic storage case is included. Non-Slip Grip: Knurled handle
- Easy to Read: High Contrast & Dual Range Scale. Accurate: Pre-Calibrated to ± 4%
- Accessories included: 1/2" Drive 5" long Extension Bar
- Simple and Reliable: “Click” sound tells the preset torque value is reached. Stop applying force when you hear and feel it.
- High Precision and Quick Reading: 3/8 torque wrench has high contrast and dual range scale( 5-45 Ft-Lb/6.8-61 Nm),making it clear and easy to read. We have professional torque wrench production technology, and after 20000 tests, the calibration error range of the torque wrench is around 3%, making it an essential helper for you
- Safe and Reliable Operation: Equipped with a bidirectional drive ratchet head, torque can be measured clockwise or counterclockwise. When the set torque value is reached, a "click" sound will remind you to stop applying force to prevent damage to the item due to excessive torque
- Good Quality and Durable Material: Made of hardened chromium vanadium steel alloy (Cr-V). At the same time, the bottom buckle tail plug adopts a red anodizing process to improve the product's oxidation resistance during use and enhance surface wear resistance. 72 tooth ratchet head, made of chromium molybdenum steel.We use the quality materials which are resist corrosion and are durable
- Quick Torque Setting: Simple and fast torque setting, pull down the locking knob and hold it down to rotate to the torque you need. Release the hand and the locking knob will automatically rebound to lock the torque value. And the designer referred to the appearance of the flashlight handle and designed a non slip and labor-saving knurled handle, making it more comfortable and easy to hold when using
- Easy to Store and Widely Use: You will receive the 3/8-inch drive click torque wrench with a sturdy plastic shell storage box, which is very delicate and durable. Torque wrench is suitable nuts and bolts on various occasions, such as bike, motorcycle, car spark, and torque wrench is suitable for repairing cars and motorcycles, which are essential maintenance tools for car owners
- Portability: durable case for portability or storage
- Added comfort: bi-material handle for comfort and grip
- Hassle free use: locking feature adjusts quick and easily for hassle free use
- Quick identification: scales stamped into housing showing inch and metric torque setting
- Meets or exceeds ASME specifications
- Includes 1-pc. 3/8 in. drive torque wrench; Storage case; Product manual with torque conversion chart
- Wrench emits a click that can be heard and felt when the preset value is reached
- Permanently marked, high-contrast dual-range scale is easy to read, even in low light
- Reversible ratchet head drives in both directions and measures torque in clockwise direction
- Durable all-steel construction has no plastic parts to break or wear out
- 3Pcs Torque Wrench Set: The calibration error range is around 3%, each torque wrench has a calibration certificate. The 3-in-1 torque wrench set can meet your different needs. Including 1/4 inch 20-240 in.lb, 3/8 inch 5-45 ft.lb, 1/2 inch 20-160 ft.lb.
- Safe and Reliable: When the 1/2 torque wrench reaches the preset torque value, it makes a clear "click" sound, accompanied by an obvious hand vibration that reminds you no longer to apply force, prevent damage caused. 72-tooth reversible ratchet head, it can be used both clockwise and counterclockwise directions.
- Quick Release Button: This 3/8 torque wrench has a quick release button with which accessories can easily be installed and removed, the accessories can grip and is not easy to fall down. It is more convenient to use. The torque wrench is made of CR-MO with a higher hardness.
- Easy to Set: First pull down the locking knob and hold it down and then start setting the desired torque value. Release the hand and the locking knob will automatically rebound to lock the torque value. If you do not use, please set the torque key to the minimal torque value.
- Widely Use: The torque wrenches can satisfy you in bicycle, motorcycle, car, truck and wheel screws, wheel nuts and in the device installation, electrical engineering, etc. We insist on bringing customers a good shopping experience.
- ±3% HIGH PRECISION AND COOL APPEARANCE: 1/2 inch drive torque wrench (10-170ft.-lb/13.6-230.5Nm)has a calibration error range of ±3%, high precision, and comes with a corresponding serial number, which is easy to trace the original data, and you can use it with confidence.Hairich torque wrench not only has superior quality but also has a superior appearance. The classic combination of black and red is fashionable and textured, allowing you to enjoy a visual feast during use.
- PREMIUM MATERIAL AND DURABLE: Experience the ultimate durability and antiskid with the torque wrench. The main body of Hairich torque wrench set is made of chrome vanadium steel alloy, which is more strong and more durable. The head of the inch-pound torque wrench adopts a ratchet design with a reversing device to improve work efficiency. The square knurled handle is made of aluminum titanium alloy, which is ergonomic and comfortable to hold for long-time use.
- DUAL SCALE AND QUICK SETTING: Laser Printed by dual-range（ft-lb and Nm). Our professional torque wrench is easy to read and provides direct unit conversion, When the set torque value is reached, the torque wrench will make an audible and felt click to remind you to stop applying force. Pull down the lock knob and hold it until the torque setting is completed. Release the hand, and the lock knob will automatically rebound back to lock the value.
- ERGONOMIC DESIGN AND POWERFUL: Every design of our industrial torque wrench conforms to ergonomic, easy to handle.72-tooth ratchet, 5° ratcheting arc head, a quick-release button for easy loading and unloading, and an aluminum non-slip handle for excellent grip and control. A recent research review that, 72-tooth ratchets are very professional tooth ratchets, you just only rotate 5 degrees to finish it. Not easy to slip and wear, can be used in small spaces, and is more durable and powerful.
- EASY OPERATION AND SAFETY: Thanks to its bidirectional drive ratchet head, our torque wrench can be measured both clockwise and counterclockwise. When the set torque value is reached, a "click" sound will remind you to stop applying force to prevent damage to the item due to excessive torque. Notice: At low Nm settings under 5 Nm the "click" sound can be too light to hear.
- Please contact us on Amazon Seller Support, we can give you 24h online after-sale service if you have any problem. We hope to help you solve and make you satisfied.
- !!!Attention!!!: 1,Torque wrench cannot be used to remove the nut, because the sudden torque for removing is much higher. 2,Keep the set value proper, avoid to set a small value but actual needs a bigger value, this can break the wrench 3, When not in use, always keep torque at the lowest setting. 2,when in use,keep the direction select in leftmost or rightmost position, not middle. 3,use just proper size socket and right direction button in case of skipping. 4,keep all the package well in case of returning in the future. 5,do not use excessive force during use to avoid affecting the accuracy of torque and even damaging the wrench.
- 【Easy to use】: Our torque wrench 1/2 feature high contrast and dual unit measurement for easy reading and setting of the required torque.Turn the bottom knob to make it in unlocked state, then turn the handle to set the torque, and finally lock the bottom knob.Adjusting the head paddle allows the 1/2 inch torque wrench to be used in both directions.
- 【Safe and reliable】: When the set torque value is reached, the automotive torque wrench will emits "Click" sound to remind you to stop applying force to prevent over torque damage to your items. Also the knurled handle provides non-slip operation.
- 【Practicality of accessories】: 1/2 inch Torque wrench set with 5-Inch extension bar and 1/2" drive to 3/8" drive adapter,which can help to take the screw or nut out in deep space.Use this dual direction torque wrench can easy to deal with car or bike repairing problem.
- 【High Precision & Easy Reading】With a dual-range scale of 20-240 in.lb/2.3-27.1 Nm, this inch pound torque wrench provides quick and precise readings, ideal for precision tasks in electronics, bicycles, and light machinery requiring lower torque levels.
- 【 "Click" Type】The 'Click' Type design of torque wrench produces a distinct sound or sensation to indicate when the fastener is properly tightened. When using the 1/4 torque wrench, turn it slowly, steadily, and smoothly, stopping when you hear or feel the click.
- 【Durable Construction】The aluminum shaft of this bike torque wrench offers superior fatigue resistance for higher and more precise usage compared to traditional materials. It also features a high-quality steel spring and chromium-molybdenum steel handle for rust prevention, ensuring durability and a longer lifespan.
- 【Easy Torque Setting】To set the torque value, pull down and hold the locking knob, then adjust to the desired value. Release the knob to lock the torque setting. When not in use, set the torque key to the minimum value to maintain the bicycle torque wrench.
- 【Convenient Storage & Versatile Use】This torque wrench set comes in a sturdy plastic shell storage box for convenient storage and organization. It is suitable for repairing various parts of a bicycle, including bolts, nuts, threaded components, handlebars, frames, brakes, and derailleurs. Additionally, it is backed by a 24-month warranty, with customer support available for any assistance needed.
- [𝐌𝐀𝐓𝐄𝐑𝐈𝐀𝐋] SUZUME torque wrenches are made of CR-V steel to ensure the durability of the torque wrench. The surface is also chrome-plated, which not only improves corrosion and wear resistance, but also gives the torque wrench set automotive a mirror-like luster, adding a touch of eye-catching beauty. For the handle, we chose a lightweight aluminum alloy, whose low-density characteristics greatly reduce the overall weight of the tool, making it easier to operate.
- [𝐇𝐈𝐆𝐇 𝐀𝐂𝐂𝐔𝐑𝐀𝐂𝐘]The SUZUME 3PCS torque wrench set, covering torque wrench 1/2 drive,torque wrench 3/8 drive and 1/4 torque wrench, is each a commitment to superior workmanship. After rigorous fatigue testing, this torque wrench kit can withstand more than 10,000 repeated uses and still maintain an incredible ±3% accuracy, which means you can use them with confidence and without worrying about re-calibration.
- [𝐋𝐨𝐮𝐝 𝐂𝐥𝐢𝐜𝐤] SUZUME torquimetro are designed with a bi-directional ratchet head that makes it easy to apply precise torque, whether you operate the wrench clockwise or counterclockwise. When your operation reaches the preset torque value, the wrench will immediately emit a clear "click" sound, accompanied by a vibration, to ensure that you can sense and stop the operation at the first time, avoiding damage to bolts, nuts and even torque wrench' due to excessive application of force.
- [𝐃𝐮𝐚𝐥-𝐒𝐜𝐚𝐥𝐞𝐬] precision at a glance! SUZUME strives for perfection in every detail of every product. Every click torque wrench is equipped with a clearly visible torque scale that makes setting and reading torque values effortless. We use laser printing technology to ensure the durability of these scales, so you don't have to worry about the values becoming blurred by wear and tear, even under frequent use over a long period of time.
- [𝐒𝐞𝐫𝐯𝐢𝐜𝐞]We understand that superior products and service are the key to earning your trust. That's why SUZUME products are backed by a comprehensive aftermarket service, our commitment to quality and your peace of mind. Our mission is very clear - 'Your Reliable Tool Partner' Our team will respond promptly to any questions you have and resolve your queries and problems quickly.
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-318 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Jayco, Inc. Submission Date : MAY 04, 2023 NHTSA Recall No. : 23V-318 Manufacturer Recall No. : Ford 23V-164 Manufacturer Information : Manufacturer Name : Jayco, Inc. Address : 903 South Main Street PO Box 460 Middlebury IN 46540 Company phone : 800-283-8267 Population : Number of potentially involved : 63 Estimated percentage with defect : 2 % Vehicle Information : Vehicle 1 : 2023-2024 Jayco/Entegra Coach Alante, Precept, Precept Prestige, Emblem, Vision, Vision XL Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : GAS Descriptive Information : Ford Motor Company provided a list of affected VIN numbers to Jayco regarding their recall 23V-164. Jayco matched those VIN numbers to our production records. Production Dates : DEC 20, 2022 – MAR 31, 2023 VIN Range 1 : Begin : 1F65F5DN2N0A18758 End : 1F66F5DNXN0A13005 ✔ Not sequential Description of Defect : Description of the Defect : Ford Motor Company reported to Jayco Inc. that they are recalling certain 2022 F-53 strip chassis. Affected vehicles have rear caliper attachment bolts that may not be fastened to the specified torque level. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : The caliper bolts may loosen over time. If one or more bolts disengage, the caliper may damage the wheel resulting in a loss of tire pressure or the caliper may damage the brake lines causing brake fluid loss in one circuit, which may result in reduced brake system performance. Either condition increases the risk of a crash. Description of the Cause : During the manufacturing process, the socket used to secure the caliper attachment bolts became worn over time, reducing the effectiveness of the tool to apply torque to the caliper bolt. Identification of Any Warning that can Occur : The driver may notice a noise / bang / clunk from the rear axle if any of the caliper bolts start working loose. Part 573 Safety Recall Report 23V-318 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Involved Components : Component Name 1 : Caliper bolt Component Description : Caliper bolt Component Part Number : 8U94-2W303-A Supplier Identification : Component Manufacturer Name : Ford Motor Company Address : One American Road Dearborn Michigan 48126 Country : United States Chronology : Please refer to Ford’s chronology on 23V-164. Ford is not aware of any warranty or field reports related to this condition. Ford is not aware of any reports of accident or injury related to this condition. March 31, 2023 Jayco Inc. received an official notice regarding Ford Safety Recall Notice 23S11/ NHTSA Recall 23V164. April 3, 2023 Jayco’s Warranty Incident Review Committee (WIRC) reviewed the incident and elevated it to the Corrective Preventive Action Committee (CPAC). On April 5, 2023 CPAC decided to elevate the incident to the Safety Steering Committee (SSC). On April 27, 2023 SSC voted to proceed with a pass through chassis recall. Description of Remedy : Description of Remedy Program : Owners will be notified by mail and instructed to take their vehicle to a Ford or Lincoln dealer to have their rear caliper bolt torque inspected. If the torque is below specification the bolts will be re-torqued to specification. For units exhibiting bolt head rounding, the bolts will be replaced. There will be no charge for this service. Ford provided the general reimbursement plan for the cost of remedies paid for by vehicle owners prior to notification of a safety recall in May 2021. The ending date for reimbursement eligibility is estimated to be April 14, 2023. Ford Motor Company will be reporting the quarterly completion rates to NHTSA. Part 573 Safety Recall Report 23V-318 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 How Remedy Component Differs from Recalled Component : Rear axle caliper bolts will have the proper torque. Identify How/When Recall Condition was Corrected in Production : Not Reported by Ford. Recall Schedule : Description of Recall Schedule : Jayco will notify its dealers and affected retail owners. Planned Dealer Notification Date : JUN 02, 2023 – JUN 02, 2023 Planned Owner Notification Date : JUN 02, 2023 – JUN 02, 2023 * NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.