โThis site contains affiliate links for which OEMDTC may be compensatedโ |
November 2, 2023 NHTSA CAMPAIGN NUMBER: 23V736000
Improperly Tightened Wheel Lug Nuts
Improperly tightened lug nuts can allow the wheel to detach, increasing the risk of a crash.
NHTSA Campaign Number: 23V736
Manufacturer Autocar, LLC
Components WHEELS
Potential Number of Units Affected 104
Summary
Autocar, LLC (Autocar) is recalling certain 2023 ACX (Xpeditor) and DC (Legend) vehicles. The wheel lug nuts may not be tightened properly.
Remedy
Dealers will inspect and tighten the lug nuts, as necessary, free of charge. Owner notification letters are expected to be mailed December 28, 2023. Owners may contact Autocar customer service at 1-888-218-3611. Autocar’s numbers for this recall are ACX-2312 and DC-2307.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
September 12, 2023, during a routine inspection, Autocar personnel discovered three units with loose lug nuts and began investigation. September 15, 2023, through October 6, 2023, Investigation and containment actions were implemented at multiple locations and internally at Autocar. October 25, 2023, Autocar personnel were retrained, and a clean point established for production. October 26, 2023, all relevant information was presented to Autocar management team and out of an abundance of caution Autocar decided to perform a voluntary Safety Recall.
2 Affected Products
Vehicles
2 Associated Documents
Defect Notice 573 Report
RCLRPT-23V736-1474.PDF 215.601KB
Recall Acknowledgement
RCAK-23V736-6180.pdf 645.339KB
Latest Recalls Documents
- For Select Aftermarket and Factory Wheels.
- Specifications: M12 x 1.50 Thread Pitch, 1.40โ Overall Height, 0.90" Diameter, 3/4" Hex, 60ยฐ Conical Seating, Bulge Acorn.
- Features: Cold forged carbon steel and tested to industry standards. Durable construction. Stylish chrome or black chrome finish. Utilizes traditional hex-body bulge-acorn design for fast and easy installation.
- ATTENTION: Refer to the ownerโs manual or the wheel manufacturerโs guide for the correct thread size, seat style, length, hex and torque specifications. You assume all liability of improper installation which can result in accident and/or injury.
- 1 year manufacturer warranty. Always check your vehicle fitment before purchasing! Contact cs@whtknight.com for warranty replacement or fitment issues.
- For Select Aftermarket and Factory Wheels.
- Specifications: M12 x 1.50 Thread Pitch, 1.40โ Overall Height, 0.90" Diameter, 3/4" Hex, 60ยฐ Conical Seating, Bulge Acorn.
- Features: Cold forged carbon steel and tested to industry standards. Durable construction. Stylish chrome or black chrome finish. Utilizes traditional hex-body bulge-acorn design for fast and easy installation.
- ATTENTION: Refer to the ownerโs manual or the wheel manufacturerโs guide for the correct thread size, seat style, length, hex and torque specifications. You assume all liability of improper installation which can result in accident and/or injury.
- 1 year manufacturer warranty. Always check your vehicle fitment before purchasing! Contact us for warranty replacement or fitment issues at cs@whtknight.com
- For Select Aftermarket and Factory Wheels.
- Specifications: M12 x 1.50 Thread Pitch, 1.40โ Overall Height, 0.90" Diameter, 3/4" Hex, 60ยฐ Conical Seating, Bulge Acorn.
- Features: Cold forged carbon steel and tested to industry standards. Durable construction. Stylish chrome or black chrome finish. Utilizes traditional hex-body bulge-acorn design for fast and easy installation.
- ATTENTION: Refer to the ownerโs manual or the wheel manufacturerโs guide for the correct thread size, seat style, length, hex and torque specifications. You assume all liability of improper installation which can result in accident and/or injury.
- 1 year manufacturer warranty. Always check your vehicle fitment before purchasing! Contact cs@whtknight.com for warranty replacement or fitment issues.
- Specifications:Closed End Bulge Acorn Style Lug Nuts - M12x1.5 thread size - Conical 60 Degree Seat - 3/4"(19mm) hex size - 1.4 inch(35.56mm) Overall Length - 22.1mm Overall Diameter
- Packaging:20 Chrome Closed End Bulge Acorn Lug Nuts for Aftermarket Wheels Only
- Vehicles Fits:Vehicles with wheel studs requiring a 12x1.5 thread,and wheels that take a conical 60 degree seat with a 3/4" hex, not fit mag seat,ball seat and round seat
- Process and Meterial:Manufactured with SCM 435 cold forged steel. Additional Heat Treating ensures dependable strength & durability. Precisely machined threads ensure a perfect fit on your vehicle's wheel studs. Special coating provides exceptional corrosion resistance and appearance
- Service:All FLYCLE lug nuts will provide 12 months of after-sales service . If you have any questions about our products, we will provide you with professional technical support.
- One-piece Solid lug nuts feature durable design and provide perfect Replacement for Infiniti
Q70, Q45, Q50, G37, I30. Nissan
350Z, 370Z, 200SX. Subaru
Forester, BRZ, Outback, WRX, Legacy and more.
- Specifications: 12x1.25 Thread Pitch; 13/16'' (21mm) Hex; 1.49" (38mm) OAL; Closed End; Color: Chrome.
- 10.9-grade Heat-treated premium steel construction, which offers better durability and strength.
- The product contains 20 high quality mag lug nuts, these lug nuts are manufactured with the highest quality to meet or exceed OEM Standards, perfect for replacing rusted and/or broken lug nuts.
- No Reason Return in 30 Days, 12 Month Warranty! If you have any problem, feel free to contact us
- For Select Aftermarket Wheels, replacement key adaptor is B07PY59X14 (3800L)
- Specifications: M14x1.50 Thread Pitch, 2.0โ Overall Height, 0.90" Diameter, 7 Spline Drive, 60ยฐ Conical Seating, Duplex Spline Acorn.
- Features: Cold forged carbon steel and tested to industry standards. Durable construction with stylish chrome or black chrome finish. Utilizes 7 spline key adaptor for fast and secure installation
- ATTENTION: Refer to the ownerโs manual or the wheel manufacturerโs guide for the correct thread size, seat style, length, hex and torque specifications. You assume all liability of improper installation which can result in accident and/or injury.
- 1 year manufacturer warranty. Always check your vehicle fitment before purchasing! Contact cs@whtknight.com for warranty replacement or fitment issues.
- SET OF 20 LUG NUTS: This package includes 20 Orion Motor Tech M12 x 1.5 lug nuts with a mag seat (1.46" long by 1.17" wide) and instructions for use to get all your wheels back on the road as soon as possible
- WIDE APPLICATION: These 12mmx1.5 wheel nuts fit a wide range of models. Compatible with Toyota
Avalon, Camry, Highlander, Prius, Sienna. Lexus
IS300, LFA, CT200h, HS250h, GS450h. Mitsubishi
Lancer, Eclipse, Outlander, Galant. Scion
xB, tC, iM, xD and more
- CHROME-PLATED Q235 STEEL: Our mag lug nuts are each made from a single piece of premium Q235 steel that has been cold-forged and heat treated for superior strength and longevity; their chrome plating further improves their corrosion resistance
- PRECISION ENGINEERED: To ensure your safety, our lug nuts are manufactured and tested at the highest standard to meet and even exceed OEM quality and performance at a fraction of their price
- PRECISION THREADS: The superior thread engagement enables your car to withstand the rigors of daily driving; add them to your car today and enjoy the ride!
- Specifications: M14X1.5 thread - closed end bulge style lug nuts - conical 60 degree seat - 1.8" 45mm long - 3/4" 19mm hex - 0.9" 23mm wide - color: silver / chrome. For Conical Required Wheel with 23mm Flange Limit Only Aftermarket Wheel
- Vehicle Models: Replacement for Chevy Avalanche/Blazer/Colorado/Equinox/Express 2500/Silverado 1500,2500,3500/Suburban 1500,2500,3500/Tahoe/Traverse. For GMC
Acadia/Canyon/Savana 1500/Sierra 1500,2500,3500/Terrain/Yukon/Yukon XL/Yukon XL 1500
- We are Different: After 72 hours of strict salt spray test, makes the nut resistant to oxygen and corrosion, gives the nut a bright visual impact. Using infrared drying technology, the paint is integrated with the metal and will not fall off easily
- One-Piece Nuts: The one-piece structure design is more splendid and safer than the two-piece design. Thick coating, cold forged and heat treated steel soild lug nuts, anti-rusting and anti-stripped, high strength and durability
- Brand Support: At MIKKUPPA, we are dedicated to delivering top-quality wheel lug nuts and exceptional customer service. Our commitment to enthusiastic support for 12 months ensures a worry-free shopping experience
- SET OF 20 LUG NUTS: This package includes 20 Orion Motor Tech M12 x 1.25 lug nuts with a mag seat (1.46" long by 1.16" wide) and instructions for use to get all your wheels back on the road as soon as possible
- WIDE APPLICATION: These 12mmx1.25 wheel nuts fit a wide range of models. Compatible with Infiniti
Q70, Q45, Q50, G37, I30. Nissan
350Z, 370Z, 200SX. Subaru
Forester, BRZ, Outback, WRX, Legacy and more. See below for full and exact fitment information
- CHROME-PLATED Q235 STEEL: Our mag lug nuts are each made from a single piece of premium Q235 steel that has been cold-forged and heat treated for superior strength and longevity; their chrome plating further improves their corrosion resistance
- PRECISION ENGINEERED: To ensure your safety, our lug nuts are manufactured and tested at the highest standard to meet and even exceed OEM quality and performance at a fraction of their price
- SATISFACTION GUARANTEED: Orion Motor Tech backs these parts with its usual strong warranty and friendly 24/7 customer service, ensuring that you'll enjoy their use for years to come
- Fitment: Vehicles with wheel lug nuts requiring a 14-1.5 thread(8 lugs) and take a flat/mag seat, compatiable with 2017-2022 F-ord F250 & F350, oem number is HCPZ-1012-B, HCPZ-1012-A please check the seat type of your original lug nuts firstly before placing your Order
- Specification: Thread pitch M14X1.5, Overall tall 1.9"(48.5mm), Diameter 1.24"(31.5mm), Closed end, flat/mag seat, separated and protected in pearl cotton box (handwrench recommended, don't use the impact tool)
- Performance: One-piece structure design, better than original "cap" style (two piece design) which is more safer while you are installing the lug nuts, high standward QC/QA control, all of our products past 72 hours salt spray tested which can promise a longer service life compared to 48 hours for others
- Premium Material: Cold Forged Alloy Steel(High Strength and Durability), quality durable surface dealing process, clear and clean pitch thread. Chrome plated can greatly improves rust&corrosion resistance and prevent the outer layer peeling easily
- Brand Promise: We hope that dynofit can make your shopping experience enjoyable. Feel free to contact us if you have any problems(missing parts, quality issues, transportation and more)
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-736 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Autocar, LLC Submission Date : NOV 02, 2023 NHTSA Recall No. : 23V-736 Manufacturer Recall No. : ACX-2312 DC-2307 Manufacturer Information : Manufacturer Name : Autocar, LLC Address : 551 S WASHINGTON STREET HAGERSTOWN IN 47346 Company phone : 7654895499 Population : Number of potentially involved : 104 Estimated percentage with defect : 35 % Vehicle Information : Vehicle 1 : 2023-2023 Autocar ACX (Xpeditor) Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : NR Descriptive Information : All ACX (Xpeditor) vehicles manufactured within the suspect date range and not inspected and secured are included. Production Dates : JAN 11, 2023 – AUG 21, 2023 VIN Range 1 : Begin : 5VCACSCE6PC240101 End : 5VCACRCE5PC244469 โ Not sequential Vehicle 2 : 2023-2023 Autocar DC (Legend) Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : NR Descriptive Information : All DC (Legend) vehicles manufactured within the suspect date range and not inspected and secured are included. Production Dates : JAN 04, 2023 – JUN 01, 2023 VIN Range 1 : Begin : 5VCCCLAF0PC241027 End : 5VCCCLEJ6PC244111 โ Not sequential Description of Defect : Description of the Defect : The lug nuts may not be properly torqued. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : If the lug nuts are not properly torqued the wheel could become loose and separate from the vehicle, increasing the risk of a crash. Description of the Cause : An Autocar manufacturing error resulted in the lug nuts not properly torqued. Part 573 Safety Recall Report 23V-736 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 Identification of Any Warning that can Occur : Loose wheels and lug nuts. Involved Components : Component Name 1 : Autocar Lug Nut Component Description : Autocar Lug Nut Component Part Number : Autocar Part Number GZ040006-001 Supplier Identification : Component Manufacturer Name : Autocar LLC Address : 551 S Washington St Hagerstown Indiana 47346 Country : United States Chronology : September 12, 2023, during a routine inspection, Autocar personnel discovered three units with loose lug nuts and began investigation. September 15, 2023, through October 6, 2023, Investigation and containment actions were implemented at multiple locations and internally at Autocar. October 25, 2023, Autocar personnel were retrained, and a clean point established for production. October 26, 2023, all relevant information was presented to Autocar management team and out of an abundance of caution Autocar decided to perform a voluntary Safety Recall. Description of Remedy : Description of Remedy Program : Autocar will voluntarily initiate an owner notification and recall of all affected vehicles. Autocar will distribute to owners of affected vehicles an Owner Notification Letter, which will describe the defect and provide instructions for scheduling the inspection/repair of the vehicle at no cost to the vehicleโs owner. The owner letter will instruct vehicle owners who have paid to have this condition remedied prior to this campaign to seek reimbursement pursuant to Autocarโs General Reimbursement Plan, on file with the agency pursuant to 49 C.F.R. 573.6(c)(8)(i) and 49 C.F.R 573.13 Part 573 Safety Recall Report 23V-736 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 How Remedy Component Differs from Recalled Component : The lug nuts will be properly torqued at no charge to the owner. Identify How/When Recall Condition was Corrected in Production : October 25, 2023, Autocar Manufacturing and Supervisory teams were retrained and established a clean point for production. Recall Schedule : Description of Recall Schedule : Dealer and owner notifications will begin December 28, 2023, and end December 29, 2023. Planned Dealer Notification Date : DEC 28, 2023 – DEC 29, 2023 Planned Owner Notification Date : DEC 28, 2023 – DEC 29, 2023 * NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
Last update on 2025-04-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.