| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA Campaign Number: 18E078
Manufacturer Honda
(American Honda Motor Co.)
Components STRUCTURE
Potential Number of Units Affected 2,933
If the centerstand detaches while moving, it can become a road hazard, increasing the risk of a crash. If the centerstand detaches while the motorcycle is parked on the centerstand, the motorcycle can fall over, increasing the risk of injury.
Summary
Honda (American Honda Motor Co.) is recalling certain Honda Genuine Accessory Centerstand Kits, part number 08M70-MJP-G50, sold for possible installation on 2016-2018 Africa Twin motorcycles. The circlip can break allowing the centerstand to detach.
Remedy
Honda will notify all registered owners of 2016-2018 Honda Africa Twins advising them that if they purchased the affected centerstand kit, not to use it and to take the motorcycle to a dealer. Dealers will replace the circlip and washer, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Honda customer service at 1-866-784-1870. Honda’s number for this recall is KJ5.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
CRF1000L #1
ISSUED: August 2018
ACCESSORY CENTERSTAND REPAIR, 2016-2017 CRF1000L/LD
AFFECTED UNITS
| 2016-2017 CRF1000L/LD | All (with affected accessory is installed) |
ACCESSORY SAFETY RECALL
Honda is launching a SAFETY RECALL on the Honda Genuine Accessory Centerstand for 2016-2017 CRF1000L/LD motorcycles for a potential defect that may allow the centerstand to detach from the motorcycle. A detached centerstand increases the risk of a crash and can create a road hazard to other roadway users, or may cause a motorcycle parked on the centerstand to fall over.
NOTE: This is an accessory recall only; units that do not have the recalled centerstand installed are not affected.
Effective immediately, YOU MUST NOT SELL or INSTALL the affected Accessory Centerstand.
AFFECTED PART NUMBER
08M70-MJP-G50 – Centerstand (’16-’17 CRF1000L/LD)
DEALER INVENTORY and USED UNITS with AFFECTED ACCY. INSTALLED
- Remove the Honda Genuine Accessory Centerstand before selling the unit.
PARTS INFORMATION
All dealers with affected accessory inventory must not sell or install the affected part. Make sure to remove the affected part number from any internet parts advertising by your dealership. Dealer parts return information is available on iN.
Honda expects that updated parts to repair in-service centerstands will be available the week of August 13, 2018.
REPAIR PROCEDURE
The complete Service Bulletin which includes the accessory repair procedure, parts information, as well as warranty claim information, is forthcoming.
| DEALER REPAIR RESPONSIBILITY |
|
CRF1000L #1
ISSUED: August 2018
SAFETY RECALL
ACCESSORY CENTERSTAND REPAIR, 2016–2018 CRF1000L/LD
BACKGROUND
Honda is launching a SAFETY RECALL on the Honda Genuine Accessory Centerstand for 2016–2018 CRF1000L/LD motorcycles for a potential defect that may allow the centerstand to detach from the motorcycle. The circlip that secures the centerstand to the motorcycle received improper heat treatment during manufacturing, which increased its hardness and makes it susceptible to breakage. An updated circlip is available to correct this condition.
Safety Consequence
A detached centerstand increases the risk of a crash and can create a road hazard to other roadway users, or may cause a motorcycle parked on the centerstand to fall over.
AFFECTED UNITS
| 2016–2018 CRF1000L/LD | Any with Honda Genuine Accessory Centerstand installed |
AFFECTED ACCESORY, DEALER INVENTORY
08M70-MJP-G50 – Centerstand
All dealers with affected accessory inventory must not sell or install the affected part. Make sure to remove the affected part number from any internet parts advertising by your dealership. Return all affected parts in your inventory, see the Parts Operations iN message dated 8/7/2018: ACCESSORY SAFETY RECALL: Centerstand, ’16-’18 CRF1000L/LD Parts Return Request
REMEDY PARTS INFORMATION
A centerstand repair kit is available to remedy an affected centerstand already installed on a motorcycle. Repair parts are available on open order.
Circlip Kit (1)
P/N 06945-MKK-305
| Kit Contents |
| Circlip, 25 mm (1) |
| Washer (1) |
WARRANTY CLAIM INFORMATION
After completing the Service Bulletin repair procedure, submit one warranty claim per unit with the following template number:
| Claim Template | Flat Rate Time |
|---|---|
| KJ5A | 0.3 hour |
| DEALER REPAIR RESPONSIBILITY |
|---|
|
CUSTOMER NOTIFICATION
American Honda is sending a letter to owners of 2016–2018 CRF1000L/LD motorcycles, informing them that their motorcycle may have an installed accessory that is under recall to replace the mounting circlip with an updated part. The letter will advise them to have a Honda dealer repair the affected accessory. For your reference, a copy of the Customer Letter is reproduced on page 3 of this bulletin.
REPAIR VERIFICATION
Before you begin the repair procedure, examine the centerstand left pivot area to determine if the recall remedy part is installed. Measure the circlip end gap as shown.
- If the circlip end gap is about 8 mm: – The remedy circlip is installed, no further action is necessary.
- If the circlip end gap is about 4 mm: – Proceed with the REPAIR PROCEDURE section of this Service Bulletin.
TECHNICAL QUESTIONS
If you have any technical questions relating to repair verification, repair procedure, or parts information please contact: Motorcycle TechLine Online: iN > Service > TechLine > TechLine Connect Or call (800) 421-1900, option 9
WARRANTY QUESTIONS
If you have any warranty administration questions relating to warranty claim templates, and claim filing procedures, please contact: Motorcycle Warranty Online: iN > Service > Warranty & HondaCare > Warranty Connect Or call (800) 421-1900, option 7
REPAIR PROCEDURE
- Remove the circlip and washer from the centerstand left pivot as shown.
- Install the remedy washer and circlip as shown.
- Make sure to install the circlip with its square edge facing out.
- Confirm that the centerstand operates smoothly.
CRF1000L #1
ISSUED: August 2018
Loading...
Reload document 
Open in new tab
CRF1000L #1
ISSUED: August 2018
Loading...
Manufacturer Notice
8-24-18
Loading...
Manufacturer Notice
August 20, 2018
Loading...
Manufacturer Notice
August 7, 2018
Loading...
Manufacturer Notice
Loading...
DEFECT INFORMATION REPORT
Loading...
| “This site contains affiliate links for which OEMDTC may be compensated” |
- Impressive Weight Capacity: With a robust capacity of 1,800 pounds, this adjustable motorcycle wheel chock stand confidently supports various motorcycle types, ensuring safe and secure storage.
- Versatile Wheel Compatibility: Designed to accommodate wheels ranging from 3 to 5 inches in width, this wheel chock stand suits a wide variety of motorcycle models, making it a versatile choice for your needs.
- Rugged Steel Construction: Crafted from heavy-duty steel, this wheel chock stand ensures long-lasting durability and dependable stability, providing a solid foundation for your motorcycle.
- Resilient Powder Coat Finish: The black powder coat finish adds more than just a sleek look; it serves as a robust barrier against rust and corrosion, extending the stand's lifespan and maintaining its aesthetic appeal.
- Innovative Self-Locking Design: The self-locking wheel cradle employs the weight of the motorcycle to keep itself upright, simplifying the loading and unloading process while providing a secure grip that minimizes the risk of accidental tipping.
- Solid front cross bar and boot provide maximum stability
- Durable steel and textured semi-gloss black powder-coat provide heavy duty strength and good looks
- Multiple rear wheel cradle adjustments fit wheels perfectly
- Designed to hold 17" - 21" wheels between 3-5/32" - 7-3/32" wide
- Easy bolt-together assembly
- Universal Wheel Compatibility: Designed to accommodate most motorcycle wheels, this wheel chock ensures a secure fit for a wide range of bike sizes and types.
- Versatile Mounting Options: Mounting securely to the floor, truck bed, or trailer, this wheel chock offers flexible installation possibilities to suit your preferred setup.
- Effortless Solo Strap-Down: Engineered for one-person operation, this wheel chock simplifies the process of strapping down a motorcycle, streamlining your loading and transport tasks.
- Sturdy Formed Steel Construction: Crafted from heavy-duty formed steel, this wheel chock provides robust support and stability, ensuring your motorcycle remains firmly in place during transport.
- Resilient Powder Coat Finish: The durable powder coat finish not only enhances the appearance but also provides protection against wear and corrosion, extending the product's lifespan.
- Heavy-duty wheel chock for motorcycle tires up to 5.5" wide
- Permanently fixed mounting brackets and tee nuts allow easy, tool-free removal of the wheel chock when not needed
- Height: 9", Interior Width: 5.75", Total Length: 12"
- Constructed from chrome-plated steel tubing
- The included mounting hardware allows installation on surfaces no thicker than 1.25"; for thicker surfaces, additional mounting hardware is required
- SPECIFICATIONS: Weight capacity: 1800 lbs. Product Size：15.35 x 10.23 x 9.65 inch. Compatible Hub Diameter：17.7inch - 25.6nch. Compatible Tire Width：Less than 6 inches. Ensuring safe and secure storage.
- ADJUSTABLE LENGTH & WHEEL LOCK: There are 12 holes on the 2 sides for adjustment, which can be widely applied for wheels or wide tire which is 17.7 inch - 25.6 inch. Utilized for garage storage, routine maintenance, or bolted directly to a surface for transportation purposes.
- SUPERIOR CONSTRUCTION: Made with high quality steel, with powder coated surface finish, which is anti-corrosion and impact-resistance, ensuring a long-time usage for outdoors.
- SESURE AND STABLE: Side loops are designed for safe and convenient travel, avoid shaking and wiggle even on rough roads during transportation. Free-standing design can be mounted to floor, truck or trailer. The adjustable feet can be fixed on uneven ground.
- NO-WORRY GUARANTEE: Each chock has been rigorously tested to ensure the safety of work. If any question, please feel free to contact us, we will do our best to handle.
- The patented locking mechanism securely supports your motorcycle in an upright position on any type of flat surface or transport platform
- The Pit Stop also serves as a Trailer Stop with the optional Trailer Adapter Kit, which allows quick attaching or detaching
- The patented lockingmechanism securely supports your motorcycle in an upright position on any type of flat surface or transport platform
- Wide Range Fitment: The motorcycle wheel chock is suitable for wheel diameters ranging from 15 to 22 inches (381-558.8 mm) and tire widths ranging from 3 to 5 inches (76-130 mm). It is suitable for all types of motorcycles, including off-road motorcycles, standard motorcycles, heavy-duty motorcycles, and more
- Function: Height: 16 1/8 ", Length: 36 3/5", Width: 35 2/5 ". Aims to keep your Motorcycle upright, change the oil, and transport it. Or make more space in the garage
- Stablity and Durablity: The Wheel Chock is made of high quality steel,supports up to 1,800 lbs. The surface finish is power coated which will be resistance to rust and corrosion for long term storage. The bottom of the wheel chock is fitted with 2 durable, non-slip rubber pads. This feature prevents the motorcycle from moving forward due to inertia when you push the motorcycle into the wheel chock, ensuring maximum stability during storage or transportation
- Adjustable Design: You can easily customize the wheel chocks to fit different sizes of motorcycle tires with holes pre-drilled holes. This ensures secure mounting and prevents the motorcycle from tipping over
- Package Included: 1 x Motorcycle Wheel Chock Stand with necessary hardware
- Economical wheel chock for motorcycle tires up to 6.5" wide
- Mounts to a motorcycle trailer, truck bed or garage floor
- Four-hole mounting pattern
- Easy bolt-together assembly
- Powder-coated steel construction
- [Heavy Duty Steel Stand] Specifically designed for 17"-21" wheels, our motorbike wheel chock is constructed from high quality heavy duty steel with a durable powder coated finish, ensuring impact resistance and long-lasting outdoor performance. Load capacity: 1500 lbs.
- [Adjustable Hole Design] Featuring a unique hole adjustment system, this front wheel motorbike offers three different positions to accommodate various front wheel sizes. Additionally, the holes in the base allow for secure anchoring to the ground, preventing theft of the motorbike chock.
- [Stable Construction] Our motorcycle stand is constructed with square tubes for increased stability and improved contact with the ground compared to traditional round tubes. The four rubber pads provide excellent shock absorption and anti-slip properties for added security.
- [Wide Applications] Ideal for cleaning, maintenance, and transportation, our motorcycle wheel chock for trailers mount is versatile and convenient. Easily secure your motorbike to trucks and trailers for transport, or use it for repair and maintenance tasks with ease.
- [Easy Assembly] Thanks to pre-drilled holes and instruction, assembling this motorcycle truck chock is a breeze and can be completed in just a few minutes. With its sturdy structure, it provides reliable support for your motorcycle, making repairs and maintenance tasks a cinch.
- Fold down for easy storage
- Patented locking mechanism securely supports motorcycles in an upright position
- As a trailer chock it easily snaps on and off transport platforms
Last update on 2025-04-15 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.