“This site contains affiliate links for which OEMDTC may be compensated” |
December 22, 2023 NHTSA CAMPAIGN NUMBER: 23V891000
Bumper Mounted Spare Tire Carrier May Detach
A spare tire carrier that fails can detach from the vehicle and become a road hazard, increasing the risk of a crash.
NHTSA Campaign Number: 23V891
Manufacturer Winnebago Towable
Components STRUCTURE
Potential Number of Units Affected 1,313
Summary
Winnebago Towable (Winnebago
) is recalling certain 2021-2023 Micro Minnie FLX travel trailers. The spare tire carrier
may fail when loaded with a certain off-road style tire.
Remedy
Dealers will replace the spare tire carrier, free of charge. Owner notification letters are expected to be mailed January 19, 2024. Owners may contact Winnebago
customer service at 1-574-825-5280 ext. 5220. Winnebago
’s number for this recall is CAM0000033. This recall is an expansion of NHTSA recall 23V270.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
NHTSA: 23V-891
Transport Canada: TC2023-699
Winnebago Towable: CAM0000033
MICRO MINNIE FLX SPARE TIRE CARRIER
PARTS:
280085 – Replacement Spare Tire Carrier Kit
Tools Needed:
Torque wrench, Impact gun, 9/16” socket, 13/16” socket.
REPAIR INSTRUCTIONS:
Using the impact gun and 13/16” socket, remove nuts from spare tire and set tire aside. Remove the tire carrier bolts that attach it to the bumper with 9/16” socket and discard old parts EXCEPT U-BOLT.
Hold the new tire carrier into place and attach the U-bolts around the bumper and into the holes on the carrier
.
Thread the U-bolt nuts onto the bolts enough to prevent the carrier from slipping but also so the carrier
can still slide on the bumper.
Place spare tire onto the new carrier so that the upper lug goes through the hole and the lower one goes through the center of the rim.
Thread the tire nuts onto these bolts. Using the torque wrench, tighten the nuts to 65 ft-lbs.
Adjust carrier location as to not block taillights or license plate.
Once location is set, tighten the U-bolt nuts to 20 ft-lbs.
Chronology :
In March, a VOQ inquiry from NHTSA stated a customer had experienced a failure on their bumper mounted spare tire carrier. An investigation was subsequently opened.
Winnebago identified a total of 21 spare tire carrier
mount issues, with 12 of those issues resulting in total detachment. The first known issue occurred in September, 2020. There are no known accidents or injuries related to this issue.After completing a data analysis and technical investigation, the Product Safety Committee met on 4/10/2023 to review the findings of the investigation and determined that a defect related to motor vehicle safety was present.
In late December a Winnebago dealer notified the company that a Micro Minnie FLX model did not appear to be impacted by recall 23V270. After a brief investigation, it was determined that this model series was inadvertently missed in the data pull as it was thought to be included in the Micro Minnie model series.
Winnebago is not aware of any additional failures on the Micro Minnie FLX.
Bumper Mounted Spare Tire Carrier
May Detach – 2021-2023 Winnebago
Micro Minnie Travel Trailers
Bumper Mounted Spare Tire Carrier May Detach – 2021-2023 Winnebago Micro Minnie Travel Trailers
3 Affected Products
Vehicle
MAKE | MODEL | YEAR |
WINNEBAGO![]() | MICRO MINNIE FLX | 2021-2023 |
4 Associated Documents
Defect Notice 573 Report
RCLRPT-23V891-4670.PDF 214.057KB
Recall Acknowledgement
RCAK-23V891-5958.pdf 678.226KB
Manufacturer Notices(to Dealers,etc)
RCMN-23V891-9301.pdf 212.699KB
Remedy Instructions and TSB
RCRIT-23V891-6232.pdf 155.018KB
Latest Recalls Documents
For the Latest and Most recent Recall Information Visit the link below…
- 【150 LBS HEAVY DUTY】This spare tire bracket is reinforced with an upgraded triangular structure welded together, with a sturdy rectangular behind plate that holds the steel beam firmly in place and holds up to 150 Lbs.
- 【WIDE APPLICABILITY】Our spare tire carrier
compatible with 4 lug X 4" diameter hole pattern, 5 lug X 4.5"/4.75“/5” diameter hole pattern, and 6 lug X 5.5" diameter hole pattern. Because of its universal compatibility, it is also suitable for boat trailers.
- 【Robust Construction】Once the screws are tightened, your spare tire mount will no longer have the risk of losing a tire. The industrial solid iron and sandblasting process gives it a durable, smooth and attractive surface so you don't have to have bumpy roads.
- 【EASY TO INSTALL】Features a sloping and raised design concept to reduce wind resistance and low clearance to the ground, firmly lock the tire. Different length bolts, no drilling required, just need a wrench, make installation and removal a breeze and you can choose the height of the steel beam yourself.
- 【WORRY-FREE VOUCHSAFING】GADFISH Spare tire carriers comes with 18 months of support and are rigorously tested before shipment. Please feel free to contact us if you have any questions regarding Carrier
installation. We will definitely give you a satisfying solution.
- [Fitment] Trailer U-Bolt Spare Wheel Carrier
Bracket fits trailer frames up to 2" or 3" wide (up to 4" high) and fits up to 15".
- [High Quality Material] The trailer tire U-bolt bracket is made of 8.8 grade thick steel, galvanized surface, beautiful and practical, corrosion-resistant coating, no fear of bad weather, durable.
- [Easy to Install] The spare tire is mounted on the side of the trailer (to prevent damage), this spare tire holder can be easily installed to secure the tire. Just put the bolts into the throat of the trailer and tighten. The carrier
bracket is threaded for easy installation.
- [Product Use] Trailer U-Bolt Spare Tire Mount is a simple solution for hauling and placing spare trailer tires.
- [Package includes] 1 x U-bolt and 2x lug nuts.
- Holds 4-lug (4 on 4" bolt pattern) and 5-lug (5 on 4-1/2" bolt pattern) trailer wheels and not compatible with 5 on 4-3/4" or 5 on 5" bolt pattern
- Mounts on trailer tongues up to 3 inch wide and 5 inch high
- Angled and raised mount design makes this ideal for boat trailers as well
- Durable powder coat finish to resist rust and corrosion
- Zinc plated mounting hardware
- 【Material】:The wall mount spare tire carrier
is used to mount to the wall of the trailer or garage,This enclosed trailer accessories spare tire carrier
, constructed of heavy duty steel.Universal fit for most spare trailer tires.spare tire holder the special chute is United States Design Patent !
- 【Optimized Design】1.This trailer spare tire mount for utility trailer,Spare tire holder for trailerthe fixed plate was widened to 2.4 inches with the bracket more secure and not easy to loose and swing .2.The patent design of the special chute is very convenient to replace the screws of different lengths, without having to remove the fixed wall board.3.The Nylon Insert Hex Lock Nuts Truly able to can better lock the tire, prevent it from falling off.4.When installed on the wall, butterfly nuts can be used to load and unload tires more quickly
- 【Include】: Spare tire carrier
bracket for enclosed trailer,Spare tire wall mount with zinc-platted steel .one Nylon Insert Hex Lock Nuts plus one ordinary hexagon nut,one wing nut,one hub nut,4 screws, 2 washers, Bracket size: 7inch length, 2.4 inch width, Long bolt size: 6.3 inch. Short bolt size: 4.3 inch.Instructions included.
- 【Function】: Spare tire mount for utility trailer,Tire Carrier
Holder Mount Bracket mount your spare tire directly to the wall of your trailer or the walls of the garage,fasten tire. Save precious space. At the same time, It is convenient to repairing and carrying.
- 【Easy to Carry】: Spare trailer tire mount tire tight and flush against the inside wall of an enclosed trailer.Spare tire mount for utility trailer easy to carry and install,not only shortens installation time, but also facilitates tire maintenance.
- 【SUITABLE FOR】Our trailer spare tire holder compatible with 4 5 6 Lugs Trailer Wheels on 4", 4.5'', 4.75'', 5'' and 5.5'' Bolt Patterns. Because of its universal compatibility, it is also good for using as the boat spare tire mount,camper
spare tire mount and rv spare tire mount.
- 【150 LBS HEAVY DUTY】The spare tire mount for boat trailer is reinforced with an upgraded triangular structure welded together, with a sturdy rectangular behind plate that holds the steel beam firmly in place, angled and raised mount design make it can hold up to 150 Lbs.
- 【Robust & Durable】The industrial solid iron and sandblasting process gives trailer spare tire holder a durable, smooth and attractive surface also resist rust and corrosion. Tightened the screws, your spare tire mount will no longer have the risk of losing a tire.
- 【EASY TO INSTALL】The features of this spare tire mount for utility trailer is a sloping and raised design concept to reduce wind resistance and low clearance to the ground, firmly lock the tire. Different length bolts, no drilling required, just need a wrench, make installation and removal a breeze and you can choose the height of the steel beam yourself.
- 【TIPS】 The spare tire mount is suitable for all racks less than 6 inches in length and more than 2 inches in width less than 4 inches. Since each trailer has a different shelf width, please measure the shelf thickness you need to use this product before purchasing. If you have any questions, please contact me in time, I will provide you with the most satisfactory solution.
- Enhanced Design: This folded edged spare tire carrier
is engineered for trailers and boat trailers, increasing bend strength by 100% to provide solid support for your spare tire.
- Heavy-Duty Durability: Constructed with a triangular welded structure, this spare tire mount holds up to 180 lbs. Its powder-coated finish resists rust and corrosion, making it ideal for utility trailers and boat trailers.
- Universal Compatibility: Compatible with multiple bolt patterns (4-lug, 5-lug, and 6-lug), this spare tire holder fits most trailers and boat trailers, making it a versatile addition to your setup.
- Quick Installation: Easy, no-drill installation with just a wrench. This spare tire mount for utility trailers attaches to tongues up to 4 inches wide and 6 inches high, making the process quick and hassle-free.
- Complete Kit: Comes with all necessary bolts for a seamless installation on your trailer or boat trailer spare tire mount, saving you time and effort.
- Upgraded 3 Nut:3 Nut design can better lock the tire, reduce the vibration and noise when driving, thus avoiding the nut loosening and tire falling.
- Safe travel: Spare tire carrier
is made of high quality precision steel, powder coated surface, rust and corrosion resistant, maximum load capacity of 150 pounds, so that travel safety is no longer a hidden danger.
- Bending design: Innovative multi-layer bending steel panels to enhance the bending resistance of 300%, reinforced and laser welded to provide three layers of protection for safe travel, can become your long-term old buddy.
- Wide Adaptability: No need to worry about the adaptability, the trailer spare tire mount is compatible with most wheels. Suitable for 4 lugs X 4"/4.25"/4.5" diameter holes, 5 lugs X 4.25"/4.5"/4.75"/5"/5.5" diameter holes, 6 lugs X 5.5"/6" diameter holes, 8 lugs X 6.5" diameter holes spare tires.
- Ready-to-install: Installation can be done in minutes. No drilling, one wrench to install and remove, complete with parts, no need to buy extra!
- 【Widely use】Spare tire mount bracket fits for trailer frames up to 2" or 3" wide(the max tire size is up to 15"),and for 4 or 5 lug wheels (bolt styles: 4 on 4 or 5 on 4-1/2).
- 【Easy to use】Simply tighten the nut and the installation is complete.It will match most all trailer studs and nut sizes.
- 【Heavy duty construction】Made of heavy duty steel coated with zine to prevent rust and corrosion.
- 【Easy to place】Trailer spare tire mount is easy to place and fits nice for your spare tire on trailer.Thread length is 3inch.
- 【Package Included】1Pcs U-bolt tire bracket,2 nuts and gaskets.
- ✅ Upgraded Tire Fit: Compatible most wheels with Compatible with Compatible with 4 lug X 4" diameter hole pattern, 5 lug X 4.5"/4.75“/5” diameter hole pattern, and 6 lug X 5.5" diameter hole pattern.
- ✅ Wide Range Compatibility: This spare tire bracket mounts on trailer tongues up to 4" wide and 5" tall
- ✅ Heavy Duty Construction: The trailer spare tire mount is design to hold Max load up to 120 lbs with high quality forged iron. And power coated black paint finish make it rust and corrosion resistant
- ✅ Hardware Included: The included zinc-plated hardware make you can easily set up the spare tire mount to your trailer
- ✅ What You Get: Spare tire carrier
sets with hardware, our worry-free 18-month warranty and friendly customer service
- [Replacement Part Number]- 924-510, 20870067, 15703311, 15866164 . Before Ordering, Please Confirm Whether The Accessories Are Suitable For Your Vehicle To Confirm Compatibility.Only Fit For 5 Or 6 LUG Wheel, NOT Fit 8 LUG Wheel
- [FIT FOR] -Compatible With CHEVY GMC
Vehicles: 1999-2017 Silverado 1500,2001-2006 Silverado 1500 HD,1999-2004 Silverado 2500,2001-2004 Silverado 2500 HD,2000 Chevy Suburban 1500 2500, Tahoe,99-17 GMC
Sierra 1500,2001-2006 Sierra 1500 HD,99-04 Sierra 2500 ,01-04 Sierra 2500 HD,2000 GMC
Yukon, XL 1500, XL 2500 And More.Easy Installation And Perfect Fit
- [Advantage]- As Time Goes By, The Spare Tire Hoist Is Impacted By Muddy Water And Gravel On The Road For A Long Time, And It Will Slowly Fail. You Cannot Put It Down In Time When You Need To Use The Spare Tire.Our Spare Tire Hoist Is Completely Designed And Manufactured According To OEM, Which Can Be Replaced Perfectly, And Updated Design Without The Secondary Safety Latch Or Lock . The Price Is Only A Small Part Of The Dealer!
- [High performance]-Long Service Life,TOP quality Spare Tire Hoist, Made Of Premium Quality For Strong Stability And Long Lasting Durability.Crafted From Surface-Treated Reinforce Steel For Increased Corrosion Resistance, To Outlast Any Other Aftermarket Winch Available. Provide Maximum Durability And Excellent Performance!
- Fit type: Vehicle Specific
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 23V-891
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Winnebago Towable DEC 22, 2023 NHTSA Recall No. : 23V-891 Manufacturer Recall No. : CAM0000033 Manufacturer Information :
Manufacturer Name : Winnebago Towable Address : 201 14th Street
Middlebury IN 46540
Company phone : 825-5250
Population :
Number of potentially involved : 1,313 Estimated percentage with defect : 100 %
Vehicle Information : Vehicle 1 : 2021-2023 Winnebago Micro Minnie FLX Vehicle Type :
Body Style :
Power Train : NR
Descriptive Information : August 20,2020 Production switched to a 15″ off-road style tire that increased in weight by 8lbs. The first incident occurred 09/10/2020.All Micro Minnie FLX units using the heaver tire are included in the population.
Production Dates : AUG 20, 2020 – APR 10, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : Winnebago Industries has decided that a defect related to motor vehicle safety exists on certain 2021-2023 Winnebago
Micro Minnie FLX model series outfitted with bumper mounted spare tire carriers and certain off-road style spare tires.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : When loaded with certain off-road style tires, the spare tire carrier may fail over time and potentially become detached from the unit in transit, which could increase the risk of a crash.
Description of the Cause : The tire hoop on the spare tire bracket being too long causes additional vibrations throughout the carrier. The tire suspended past the vertical tube would make the entire assembly vibrate and put strain on the vertical tube and supporting welds. Identification of Any Warning
that can Occur : Part 573 Safety Recall Report 23V-891 Page 2 Involved Components : Component Name 1 : Spare Tire Carrier
Component Description : Bumper Mounted Spare Tire Carrier Component Part Number : 141012-01 Supplier Identification : Component Manufacturer
Name : Red Rock Supply Address : 1845 Hemlock Ct.
Goshen Indiana 46528
Country : United States Chronology :
In March, a VOQ inquiry from NHTSA stated a customer had experienced a failure on their bumper mounted spare tire carrier. An investigation was subsequently opened. Winnebago
identified a total of 21 spare tire carrier
mount issues, with 12 of those issues resulting in total detachment. The first known issue occurred in September, 2020. There are no known accidents or injuries related to this issue.After completing a data analysis and technical investigation, the Product Safety Committee met on 4/10/2023 to review the findings of the investigation and determined that a defect related to motor vehicle safety was present. In late December a Winnebago
dealer notified the company that a Micro Minnie FLX model did not appear to be impacted by recall 23V270. After a brief investigation, it was determined that this model series was inadvertently missed in the data pull as it was thought to be included in the Micro Minnie model series.
Winnebago is not aware of any additional failures on the Micro Minnie FLX. Description of Remedy :
Description of Remedy Program : Reimbursement request will fall under the general reimbursement plan on
file with NHTSA.
How Remedy Component Differs Winnebago has designed a new spare tire carrier
with the tire hoop sized
appropriately to allow the tire to rest on the vertical tube to reduce the The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 23V-891
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
from Recalled Component : vibrations throughout the assembly and to fully brace the tire hoop to increase structural strength.
Identify How/When Recall Condition was Corrected in Production :
Production corrected the issue in April 2023.
Recall Schedule :
Description of Recall Schedule : NR
Planned Dealer Notification Date : JAN 05, 2024 – JAN 05, 2024
Planned Owner Notification Date : JAN 19, 2024 – JAN 19, 2024
* NR – Not Reported
**************************************************************************************************************
201 14ᵗʰ Street, Middlebury, In 46540
Phone: 574-825-8052, wtowWarrantyTech@winnebagoind.com Winnebago.com
Safety Recall: MICRO MINNIE FLX SPARE TIRE CARRIER Repair, Claim Preparation, and Filing Instructions
Please submit a warranty claim pre-authorization using the following codes and labor times:
LABOR: OPERATION CODE LABOR ALLOWANCE Remove and Replace: 44012001 0.20
PARTS:
280085 – Replacement Spare Tire Carrier Kit
Please follow attached repair instructions.
Submit all pre-authorizations and claims through the Dealer Portal. If there are any questions, please call our Warranty Team at 574-825-5250.
NHTSA: 23V-891
Transport Canada: TC2023-699
Winnebago Towable: CAM0000033 Winnebago
.com
Repair Instructions: MICRO MINNIE FLX SPARE TIRE CARRIER
Tools Needed: Torque wrench, Impact gun, 9/16” socket, 13/16” socket.
REPAIR INSTRUCTIONS: Using the impact gun and 13/16” socket, remove nuts from spare tire and set tire aside. Remove the tire carrier bolts that attach it to the bumper with 9/16” socket and discard old parts EXCEPT U-BOLT.
Hold the new tire carrier into place and attach the U-bolts around the bumper and into the holes on the carrier
.
Thread the U-bolt nuts onto the bolts enough to prevent the carrier from slipping but also so the carrier
can still slide on the bumper.
Place spare tire onto the new carrier so that the upper lug goes through the hole and the lower one goes through the center of the rim.
Thread the tire nuts onto these bolts. Using the torque wrench, tighten the nuts to 65 ft-lbs.
Adjust carrier location as to not block taillights or license plate. Once location is set, tighten the U-bolt nuts to 20 ft-lbs.
201 14ᵗʰ Street, Middlebury, In 46540
Phone: 574-825-8052, antyTech@winnebagoind.com
**************************************************************************************************************
201 14ᵗʰ Street ⏺ Middlebury, IN 46540 ⏺ PH: 574.825.5250 ⏺ FAX: 574.825.5433
http://www.winnebago.com
DEALER COMMUNICATION
Date:
To: Subject: Issue:
January 2, 2024
All Winnebago Towable Dealers
NHTSA Safety Recall# 23V-891 Transport Canada# 2023-699
Winnebago Towables has decided that a defect related to motor vehicle safety exists with the bumper mounted spare tire carrier on certain 2021-2023
Winnebago Micro Minnie FLX model series outfitted with certain heavier, off-road style spare tires. Please note this is an expansion of recall 23V-270 / TC2023-226.
Affected Vehicles:
MAKE
WINNEBAGO
MODEL
Micro Minnie FLX
MODEL YEARS
2021-2023 Dealers that have stock units impacted by this recall can access the full list of affected VINs sold to their dealership by accessing the Winnebago Dealer Portal. Repair Information: The remedy has been developed and is posted to the Winnebago
Dealer Portal. Owner Notification: Winnebago
Towables anticipates notifying owners by mid to late January. Dealer Responsibility Do not deliver any subject trailer until corrective action has been taken or the subject spare tire carrier has been removed from the trailer. All vehicles subject to this campaign are to be serviced at no charge to the owners regardless of mileage, age of vehicle, or ownership from this time forward. Notes Important Reminder: It is a violation of federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification until the noncompliance is remedied.
Please ensure all dealership personnel are aware of this notice so they are able to address customer questions. Contact Winnebago Towable Customer Care if you require additional assistance. Direct any press inquiries to Winnebago
Public Relations.
– END OF MESSAGE –
IMPORTANT SAFETY RECALL NOTICE
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.