“This site contains affiliate links for which OEMDTC may be compensated” |
January 9, 2024 NHTSA CAMPAIGN NUMBER: 24V008000
Overloaded Electrical System May Cause Fire
Overloaded electrical circuits can overheat, increasing the risk of fire.
NHTSA Campaign Number: 24V008
Manufacturer PL Custom Emergency Vehicles
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 39
Summary
PL Custom Emergency Vehicles (PL Customs) is recalling certain 2020-2024 Ambulance & Rescue Vehicle Type 1 and Type 3 vehicles. In the event of a short circuit or wiring failure, the firmware in the vehicle multiplex system may fail to shut off the output pin, resulting in overloaded electrical circuits.
Remedy
Dealers will update the firmware, free of charge. Owner notification letters were mailed January 15, 2024. Owners may contact PL Custom customer service at 1-732-223-1411.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
PL CUSTOM EMERGENCY VEHICLES WARRANTY DEPARTMENT RECEIVED A TECHNICAL SERVICE BULLETIN (TSB) REGARDING RECALL 23E-084 PL CUSTOM WAS NOTIFIED ON DECEMBER 13TH 2023 PL CUSTOM CONDUCTED AN INVENTORY SEARCH ON DECEMBER 15TH 2023 AND DETERMINED THAT 39 UNITS WERE AFFECTED. ALL END USERS WILL BE NOTIFIED HOW TO CORRECT THIS ISSUE PER INSTRUCTIONS PROVIDED WELDON.
23E084 – Overloaded Electrical System May Cause Fire – Weldon 8×16 Input-Output Node Vehicle Multiplex Systems
23E084 – Overloaded Electrical System May Cause Fire – Weldon 8×16 Input-Output Node Vehicle Multiplex Systems
10 Affected Products
Vehicles
MAKE | MODEL | YEAR |
PL CUSTOM | TYPE I | 2020-2024 |
PL CUSTOM | TYPE III | 2020-2024 |
3 Associated Documents
Recall Acknowledgement
RCAK-24V008-4069.pdf 645.386KB
Defect Notice 573 Report
RCLRPT-24V008-2200.PDF 213.727KB
Manufacturer Notices(to Dealers,etc)
Latest Recalls Documents
For the Latest and Most recent Recall Information Visit the link below…
- 【Meet Different Needs】 The 12V round voltmeter comes with a panel and a nylon nut, which can be mounted separately on the 29mm diameter mounting hole or fixed on the matching panel, so that it could meet your different mounting needs.
- 【Blue LED Display】 This 12V battery meter with blue LED light, can be widely used under DC 12V 24V. With the digital voltage meter, you can easily monitor the voltage status of your car battery in real times, especially in dark environments.
- 【Waterproof & Useful】 The marine voltmeter gauge is waterproof design, so this LED voltmeter is safe to use even in moist environments. And also the mini
voltmeter is fit for 12V 24V cars, automotive, motorcycles, RVs, SUV, Off-road, ATV, boats, marine, ships, trucks, tractor, etc.
- 【Measuring Range】 The rating of this battery voltage monitor is DC 8-48V, and its accuracy is 0.1V. With the precise 3-digit LED digital voltmeter, you can better monitor of the car's battery voltage status, helping to extend battery life.
- 【Easy installation】 This 12 volt battery monitor comes with a set of wires, two mounting screws, a matching panel and a nylon nut, making it easy to install and use.
- Universal battery capacity indicator voltage meter - wide voltage input range DC 12V-84V Lead-acid Batteries and 3S-26S Lithium Batteries: Ternary lithium batteries, polymer batteries, lithium-ion batteries, storage batteries.
- Multifunctional Battery Capacity voltage meter Indicator - Battery tester Right Switch key can switch voltmeter, battery percentage, switch off. Left setting key have several functions: Cycle voltmeter/battery percentage, turn on the backlight, black, sleep mode, battery type selection etc.
- High Quality of battery voltage meter - Large LCD screen display with green backlit and low power consumption.Two display modes can be available: battery symbol and battery percentage, battery symbol and voltmeter.
- Safety to Use - The battery voltage meter Built-in 30cm power cable, simple to connect. Reverse protection design, won't burn if connect reversely.
- Portable and Waterproof voltage meter- Small size, light weight, equipped with a PVC film, the surface is waterproof.
- Dual-display: it can display auto battery voltage and temperature inside the car simultaneously(this is for Fahrenheit)
- External temp sensor: its external temp sensor allows you to bend sensor to avoid possible heating/ direct sunshine so that you can acquire more accurate results
- Safe usage: the monitor has built-in fuse, making safe usage possible and causing no damage to your car
- Easy reading: it screen is made of LED material, hence it is easy and convenient for you to read even in dim light
- With red screen digital color, there is no difficulty in seeing the display; Apply for DC 12V or 24V car; Measuring range: DC 8V-30V+/-1.2% (The voltage of car usually reads 12V±0.5V when it works; PLEASE ALLOW 0.1-0.5 VOLTS DISPLAY ERROR)
- This digital gauge displays the voltage of batteries in the car; Powered by car cigarette lighter charger
- Simple enough to use, just plug it into cigar lighter socket, watch alternator's output from idle to accelerated speed
- When engine running (do not drive), the LED display: between 13.5 to 14.5 (12V car), between 26.0 to 28.0 (24V car)
- When engine off, and nothing turned on, LED display: Greater than 12.0 (12V car) or 24.0 (24V car)
- Efficient setting key: the multifunctional battery capacity indicator has a new design of the front setting button, and have several functions: cycle voltmeter/battery percentage, turn on the backlight, black, sleep mode, battery type selection etc.
- Humanized designs: the battery capacity voltage indicators are designed with switched function button, you can press to check the battery capacity or real-time voltage and turn off, with alarm design, the battery meter display will flash when the battery capacity is low
- Fit different battery: the battery gauge indicators are compatible with 12V/ 24V/ 36V/ 48V/ 60V/ 72V/ 84V acid battery, ternary lithium battery, polymer lithium-ion battery, 3 -15 series lithium ion battery, storage battery, water battery and more
- LCD display: the battery capacity gauge indicators come with PVC waterproof screen protector with bright back-light, which makes you can read the results on the clear LCG display from different angles, low working power consumption and the max is 5 mA
- Suitable for: the battery meters with alarms can be applied to different machines and places such as garden, home, office and more, can serve you for a long time, meeting your different needs and practical battery indicators will give you nice experience
- ✅12V Lead-Acid Battery Monitor: ANCEL BM200 Pro is a 12V lead-acid battery tester, which consists of a wireless host unit and a wireless display. It can display the voltage, power, temperature and health of the battery in real time, and automatically test the starting and charging systems of the vehicle. When the temperature is abnormal, low power, low voltage, startup system failure, charging system exceeds the normal range, the wireless display will automatically emit alarm sound to remind.
- ✅433MHZ Radio Frequency Transmission: Compared with Bluetooth, BM 200 Pro battery monitor adapt 433MHz RF technology has the advantages of better penetration ability, longer signal transmission distance( It can reach tens of meters), more energy saving and less signal interference, which is suitable for data transmission in any complex environment. Such as basement, stairwell, rural areas and any other places, etc.You do not need to connect to the network,phone and install the app.
- ✅Energy Saving And Environmental Protection: The car battery tester display screen adopts two modes of power supply:Type-C fast charging and solar panel. The solar panel powers and charges the device so that it does not need to be charged as often.The use of solar cells are more environmentally friendly, energy efficient, and can work independently of the grid.This is very useful for some remote areas or wilderness adventure and other scenarios.High economy can reduce energy costs.
- ✅Build-In Vibration Sensor: battery load tester with automatic on/off function. when BM200 Pro feels the vibration, it will automatically turn on and keep running for 5 minutes. If the device feels the vibration again within 5 minutes,it will continue to keep the power on. if no vibration occurs within 5 minutes,then BM200 Pro will automatically go into standby. Helping users to eliminate the step of turning off the device when it is not needed, thus improving the convenience of using the device.
- ✅Safety Protection & Wide Compatibility: Built-in fuse and reverse connection protection, unlike other car battery tester automotive, our ANCEL BM200 Pro digital car battery load tester all batteries are equipped with 100% high quality safety copper clips with reverse polarity protection and spark protection for stable and safe connection during testing. Suitable for all 12V lead-acid batteries, such as: cars, motorcycles, trucks, RVs, ATVs, suv's, boats, yachts, lawn mowers, etc.
- 【Measuring Range】: The measuring range of this automobile voltmeter is DC 6-36V with an accuracy of 0.1V, which is widely used in cars, trucks, motorcycles, ships, yachts, trailers, etc. You will receive 1 car voltmeter and 2 nuts in the package. Effortlessly monitor your battery voltage with all necessary accessories included.
- 【Note】: Battery voltage judgment standard: Before starting the vehicle: 1. Less than 10.8V, it is too low and the car cannot be started. It is recommended to replace the battery; 2. Between 10.8V-11.8V, it is too low and it is difficult to start. Please turn off other electrical appliances and start the car to charge; 3. Between 11.8V-12.8V, it is normal. After starting the vehicle: 1. Between 12.8V-13.2V, it is too low and the battery may not be charged. Check the engine or other electrical loads; 2. Between 13.2V-14.8V, it is normal; 3. Greater than 14.8V, it is too low and may damage the battery. Check the engine stabilizer.
- 【Digital Voltmeter Display】: Featuring a precise 3-digit LED digital display, this 12V battery monitor provides clear digital readings allowing you to monitor real-time battery voltage status even in dark environments.
- 【Premium Material】: This vehicle voltmeter is made of high-quality PC material, waterproof, flame retardant, high-temperature resistance, corrosion resistance, long service life, is not easy to deform, safe to use in wet environments. It also has reverse connection protection to prevent the line from burning out.
- 【Meet Different Needs】: The 12V round voltmeter comes with a panel and nylon nuts, just install the voltmeter in the 1-1/8-inch hole on the panel, and the nylon fixing nut will fix the meter in the appropriate position, which can meet different installation requirements.
- 1.9 in 1 Measuring Type/Range:Voltage 0-200V,Current 0-300A,Power 0-60000W,Impedance 0-1000Ω,Internal Resistance 0-999mΩ,Capacity 0-1000AH,Dump energy 0~9999kWh,Running time 0-999 hour.
- 2.LCD Display:Large-screen LCD with a full sight of 180° view,The blue backlight can be turned on/off manually.
- 3.Two modes: normal display mode and dormant mode.
- 4.No screws design: Press down terminal buttons, insert bare thread and release.
- 5.Wildly application:DC multifunction battery meter wildly applied to solar system/industrial assembly line/Automobile/RV etc.
- MEET THE BM300 Pro - Similar to the BM300, offers wider applications. Enhancements include 24V power, upgraded Bluetooth 4.0 to 5.3, extended data storage from 30 to 72 days, IP67 waterproofing, customizable batteries, ability to monitor 4 batteries simultaneously
- KEY FEATURES - BM300 Pro monitors battery health, including voltage, cranking & charging system and driving records. It monitors abnormal battery conditions and takes appropriate measures to protect the battery. With 72 days of data storage, you can compare changes before and after taking measures, giving you a better understanding of your battery's status
- BLUETOOTH 5.3 Ver. - Say goodbye to checking the battery status under the hood. Whether it's scorching hot or freezing cold, or even rainy days, the 3.2oz battery monitor lets you comfortably monitor real-time battery data from inside your car or up to 10m, allowing for proactive intervention. Plus, with the Bluetooth 5.3 upgrade, you'll identify and connect to Bluetooth even faster. Note: Bluetooth connectivity may be affected by extreme cold or obstacles. For optimal performance, use it in a clear, open area with suitable temperatures
- EASY TO USE - Install once and permanently fix onto your battery without the trouble of repeated installation. Access the battery’s health data directly from your phone and enjoy real-time monitoring by opening the app. Additionally, the power consumption is as low as 1mA, almost negligible- making it a hassle-free stethoscope for your car battery
- >99.6% ACCURANT READINGS - Equipped with an intelligent chip for precise data readings. The connector design features red and black rubber handles, making it easy to place on battery terminals and achieve a snug fit for more accurate readings the longer you monitor
- ⚠️ THREE-COLOR LED DIGITAL LIGHT DISPLAY: This digital voltmeter with LED digital display, with high-brightness red, orange and green three-color digital LED light, can show the different voltage status of the battery, which is convenient for you to clearly and intuitively check the battery voltage value.
- ⚠️ REAL-TIME MONITORING OF BATTERY VOLTAGE: Ourbattery monitor 12V is convenient for you to monitor the voltage of the battery in real time, and know the voltage of the battery in time. Let the voltage can be used under normal working voltage, protect the car battery and engine, prolong the service life.
- ⚠️ EASY TO INSTALL AND PORTABLE: The car battery monitor is made of reliable ABS
material, sturdy and durable, with high protection level, easy to use even in many harsh environmental conditions. Easy to install, just plug in the power cord. And the compact and lightweight design makes it easy to carry and store.
- ⚠️ WIDE APPLICATION: This voltmeter digital is specially designed for 12V DC system to avoid malfunction. It is suitable for most of the models with 12V DC voltage on the market, such as car, truck, SUV, RV, van, motorcycle, boat, ATV, UTV, etc. Providing you with a safer and more stable driving environment.
- ⚠️ BUYING GUIDE: You will receive 1pcs battery voltage meter and 2pcs accessories with protection pins. With a test voltage range of 5-36V and a voltage measurement accuracy of 0.1V. After owning our voltage meter, you no longer need to worry about the battery suddenly dying and not being able to start your car.
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-008
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
PL Custom Emergency Vehicles JAN 09, 2024 NHTSA Recall No. : 24V-008 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : PL Custom Emergency Vehicles Address : 2201 Atlantic Avenue
Manasquan NJ 08736
Company phone : 732-223-1411
Population :
Number of potentially involved : 39 Estimated percentage with defect : 100 %
Vehicle Information : Vehicle 1 : 2020-2024 AMBUALNCE & RESCUE VEHICL TYPE 1 TYPE 3 MEDIUM DUTY & RESCUE
Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES
Body Style :
Power Train : NR
Descriptive Information : PL CUSTOM TYPE 1 TYPE 3 MEDIUM DUTY AND RESCUE VEHCILES ARE EQUIPPED WITH WELDON’S V-MUX 8X16 INOUT / OUTPUT NODES AND ARE SUBJECT TO RECALL. WELDON PROVIDED QUANTIES AND SERAIL NUMBERS OF THE AFFECTED NODES.
Production Dates : JAN 01, 2020 – JUN 30, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : IN THE AFFECTED PRODUCTS SHORT CIRCUIT PROTECTION MAY NOT FUNCTION PROPERLY. IN THE CASE OF A SHORT CIRCUIT IN THE WIRING OR THE CONNECTED LOAD OVERHEATING OF THE WIRING OR THE LOAD MAY OCCUR
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : DEPENING ON HOW THE PRODUCT IS INSTALLED IN THE VEHCILE THIS
COULD INCREASE THE RISK OF A VEHCILE FIRE.
Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR
Involved Components : Part 573 Safety Recall Report 24V-008 Page 2 Component Name 1 : V-MUX 8X16 INPUT / OUTPUT NODE Component Description : MULTIPLEX INPUT / OUTPUT NODE Component Part Number : 6030-2000-00 Supplier Identification : Component Manufacturer
Name : WELDON DIVISION OF AKRON BRASS Address : 3656 PAROGON DRIVE
COLUMBUS Ohio 43228
Country : United States Chronology :
PL CUSTOM EMERGENCY VEHICLES WARRANTY DEPARTMENT RECEIVED A TECHNICAL SERVICE BULLETIN (TSB) REGARDING RECALL 23E-084 PL CUSTOM WAS NOTIFIED ON DECEMBER 13TH 2023 PL CUSTOM CONDUCTED AN INVENTORY SEARCH ON DECEMBER 15TH 2023 AND DETERMINED THAT 39 UNITS WERE AFFECTED. ALL END USERS WILL BE NOTIFIED HOW TO CORRECT THIS ISSUE PER INSTRUCTIONS PROVIDED WELDON. Description of Remedy :
Description of Remedy Program : IF THE VEHICLE IS EQUIPPED WITH A V-MUX 8X16 INPUT /OUTPUT
NODE THE END USER MUST PERFORM A FIRMWARE UPDATE. WELDON WILL BE RESPONSIBLE FOR REIMBURSING THE FACILITY FOR PERFORMING THE REPAIRS. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : NR ON DECEMBER 13TH 2023 WE RECEVIED NOTIFICATION FROM WELDON THAT THERE WAS AN ISSUE WITH THE V-MUX 8X16 INPUT / OUTPUT NODE. ON DECEMBER 15TH WE IDENTIFIED THE AFFECTED VEHCILES CONTAINING THIS COMPONENT. WE ARE KNOW IN THE PROCESS OF PROVIDING WELDON WITH A LIST OF AFFECTED VEHICLES AS WELL AS PL CUSTOM NOTIFYING EACH CUSTOMER AND EACH SELLING DEALER Recall Schedule : The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-008
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Description of Recall Schedule : PL CUSTOM EMERGENCY VEHICLES WILL BEGIN NOTIFYING DEALERS
AND CUCTOMERS BEGINING 1/15/2024
Planned Dealer Notification Date : JAN 15, 2024 – MAR 15, 2024
Planned Owner Notification Date : JAN 15, 2024 – MAR 15, 2024
* NR – Not Reported
**************************************************************************************************************
January 22, 2024
Re: Safety Recall from Weldon, a division of Akron Brass Company for VMUX 8 x 16 Nodes
Vehicle Info:
• Snyder Fire District R-342
• Walden Fire District R-360
• Hamburg Vol FD R-367
• Grand Island R-362
This letter is being sent to our Dealers to advise that certain PL Custom Body and Equipment Co., Inc. customer vehicles may be equipped with a Weldon VMUX 8 x 16 Node P/N 6030-2000-00, produced between March 20, 2020 and June 14, 2023, that has been subject to a NHTSA Safety Recall. In the affected products, the short circuit protection may not function properly, and an overheating condition may occur. The Weldon records indicate that PL Custom Body and Equipment Co., Inc DBA PL Custom Emergency Vehicles and Rescue 1 received shipments of potentially affected units/nodes. We have supplied Weldon with a complete list of all of our customer names, contact information and associated Vehicle Identification Numbers.
Weldon has advised they will be contacting the customer to advise of the safety recall and potential overheating issue.
Manufacturer of Custom Emergency Vehicles
2201 Atlantic Avenue, Manasquan, NJ 08736 (732)223-1411 Fax 732-223-8456 manufacturer of Custom Emergency Vehicles
2201 Atlantic Av 36 (732)223-1411 Fax 732-223-8456
As part of the NHTSA requirement of a safety recall, you as the DEALER will need to support this recall with the customer. Assist in the inspection of the node in the vehicle, and provide the S/N to Weldon to determine if they have one of the affected nodes. We have attached a copy of the Weldon recall, the update instructions and two photos to assist in identifying the S/N of the node in the vehicle. If the node in the vehicle does not match the S/N as listed on the attachment, this recall does not apply and no action is required. The node will need to be updated via the Akron 6131-0000-00 diagnostic kit and can be performed by the PL Custom or Rescue 1 Dealer at your location or at the customer location when other service is being provided.
Weldon will be providing a minimal compensation of $50.00 for the update and will not cover travel to and from the customer location. Weldon will be tracking this recall and supplying information back to us at the vehicle OEM. PL Custom will be responsible to file the completion reports with NHTSA. We appreciate your attention to this important safely recall and your cooperation in getting it completed in a timely fashion.
Sincerely, Clifford J Wooley
Technical Services Manager cwooley@plcustom.com
732-223-1411 ext. 128
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.