| โThis site contains affiliate links for which OEMDTC may be compensatedโ |
May 6, 2024 NHTSA CAMPAIGN NUMBER: 24E036000
Light Failure from Overheated Motherboard/FMVSS108
Lights that fail to illuminate can reduce the vehicle’s visibility to other drivers, increasing the risk of a crash.
NHTSA Campaign Number: 24E036
Manufacturer Hiniker Company
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 1,016
Summary
Hiniker Company (Hiniker) is recalling certain Series 700, 2000, 6000, 7000, 8000, 9000, and 9500 snowplows, part number, HTBX 38828015. The motherboard may overheat, causing the snowplow controls and/or lighting to fail. As such, these snowplows fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, “Lamps, reflective devices, and associated equipment.”
Remedy
Hiniker will replace the motherboard, free of charge. The manufacturer has not yet provided a schedule for recall notification. Owners may contact Hiniker customer service at 1-507-625-6621 or 1-800-433-5620.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
Following a higher than expected rate of warranty claims in 2024, Hiniker investigated the matter and, on April 29, 2024, received an electrical engineering opinion that the specified diode and the specified wire gauge were insufficient to handle the amperage that could be experienced under certain operating conditions or with certain installations. This could result in failures owing to the overheating’s affecting the plow lights and the vehicle lights.
7 Affected Products
Equipments
| BRAND | PART NO. | PRODUCTION DATES |
| HINIKER | 2000 SERIES SNOWPLOW | |
| HINIKER | 6000 SERIES SNOWPLOW | |
| HINIKER | 700 SERIES SNOWPLOW | |
| HINIKER | 7000 SERIES SNOWPLOW | |
| HINIKER | 8000 SERIES SNOWPLOW | |
| HINIKER | 9000 SERIES SNOWPLOW | |
| HINIKER | 9500 SERIES SNOWPLOW | |
2 Associated Documents
Recall Acknowledgement
RCAK-24E036-6236.pdf 702.396KB
Defect Notice 573 Report
RCLRPT-24E036-1119.PDF 213.911KB
Latest Recalls Documents
![Abrams Snow Plow Lights [Heated Lens] Anti Freeze/Anti Icing Function LED Combination Head Light Kit for Heavy-Duty ATV Snow Plow, Truck Snowplow Road Side Safety Universal Snow Thrower Accessories](https://m.media-amazon.com/images/I/31GR4n4ekrL.jpg "Light Failure from Overheated Motherboard - Hiniker Snowplows 2")
- โ๏ธ MAKE SNOW PLOWING EASIER & SAFER with an ultra-powerful LED headlight set for your snow pusher vehicle. Shed bright light of full 40W LED around, to shovel snow easier and keep the roads open, clear and safe.
- โ๏ธ INSTALL YOUR PLOW LIGHTS IN MINUTES: No need to be a handyman to set up your lights! Get in our set the Right and Left headlights, 2 waterproof DT connectors, the mounting hardware and the instructions manual for effortless setup.
- โ๏ธ ULTRA-EFFICIENT & RELIABLE LED LIGHTS: Unlike traditional Halogen lights, our waterproof LED lights provide you with a luminous flux of 4000lm and White 6000K color temperature, for reliable performance of up to 50,000 hours.
- โ๏ธ ADJUST YOUR PLOW LIGHT KIT TO YOUR NEEDS: Select Hi/Low beam, dynamic turn, front position, and rear position LED lighting. Increase the efficiency of your pickup truck, garbage truck, municipality truck, tow truck or construction vehicle.
- โ๏ธ THE BEST LED LIGHTS FOR HARSH WEATHER: We make our LED lights of Aviation aluminum 6063, to offer you the IP68 waterproof, anti-freeze, anti-ice, long-lasting lamps you need for your off-road snowblower truck.
- Enhance Your Snowplow's Visibility: Replace your old, worn-out snowplow lights with HECASA's Universal Trunk Lights for improved visibility and safety on the road.Snowplow Lights Replacement For 64261-4.
- Durable and High-Quality Materials: Made from ABS
plastic with a clear lens and black housing, these lights are built to last and withstand harsh weather conditions. - Specification: Voltage Amp: 12V / 5.0A - 3.5A; Voltage Amp: 12V / 2.1A - .59A ;Bulb: 1157, 32/3 CP.
- Easy to Install: Includes all necessary mounting hardware (as shown in the picture), but please note that instructions are not included.
- Compatibility: These lights are designed to be a universal fit for most snowplows and are a reliable replacement for the part number 64261-4.
plastic with a clear lens and black housing, these lights are built to last and withstand harsh weather conditions.
- Description: This snowplow head light kit consists of dual beam halogen headlamps with turn signals and parking lights and are contained in a high-impact poly carbonate case. They can be mounted using the double-post mounts and the entire kit comes with a universal wiring harness to fit any make and model of vehicle.
- Fitment: Center hole distance: 3.43". Light will be suitable for but not limited to the following manufacturers: Blizzard, Meyer, Fisher, Boss, Western, Snow Way, Curtis, Snow Dog, Hinker and More! Replacement for 1311100.
- Package Included: Universal wiring harness is included. All-inclusive kits shown in the picture. Not include a switch or wire connectors. Professional installation is HIGHLY recommended. NOTE: We offer electronic version of the installation instruction.
- Heavy Duty: Durable and reliable during poor weathers. The light is effectively waterproof and anticorrosion, so that it can withstand any weather conditions, mud.
- High Performance: Help drivers clear snow by improving road lighting in dark or low light conditions. It is easier to see the road ahead and any obstacles or other vehicles that may appear on the road.
- Package Dimensions: 37.211 H x 21.59 L x 36.449 W (centimetres)
- Package Weight: 4.4 kilograms
- Fit type: Vehicle Specific
- Country of Origin : China
- FITMENT - New Universal Halogen Snow Plow Lights will fit but is not limited to the following manufactures: Blizzard, Meyer, Fisher, Boss, Western, Snow Way, Curtis, Snow Dog, Hinker and More! Replace for Part Number 1311100. Bulb parameters: White light: 55W, yellow light 21W
- PARAMETER - Chrome Housing + Clear Lenses. Distance Between Mounting holes :3.43". The snow plow headlight kit consists of dual-beam halogen headlights with turn signal and stop lights, and is contained in a high-impact polycarbonate housing. High and low beams illuminate your plowing area in various conditions
- SOLID QUALITY - High Impact Polycarbonate Case๏ผMade of High Quality Plastic + Steel Material for Strength and Durability. Excellent waterproof, and antifreeze performance. Durable enough to withstand any weather conditions
- EXCELLENT FUNCTION - The Halogen Headlights can help snowplow operators see the road more clearly, and also help the vehicle itself to be more easily seen by other drivers on the road, ensuring a safe driving distance in heavy snow and avoiding accidents or collisions
- PACKAGE & INSTALLATION - 1 Pair Halogen Snow Plow Lights & 1 x Universal Wiring Harness & All-inclusive Kits. Not include a switch or wire connectors. The installation uses a double-post bracket and the whole kit comes with a universal wiring harness to suit any vehicle of any manufacture and model
- โ๏ธ MAKE SNOW PLOWING EASIER & SAFER with an ultra-powerful LED headlight set for your snow pusher vehicle. Shed bright light of full 40W LED around, to shovel snow easier and keep the roads open, clear and safe.
- โ๏ธ INSTALL YOUR PLOW LIGHTS IN MINUTES: No need to be a handyman to set up your lights! Get in our set the Right and Left headlights, 2 waterproof DT connectors, the mounting hardware and the instructions manual for effortless setup.
- โ๏ธ ULTRA-EFFICIENT & RELIABLE LED LIGHTS: Unlike traditional Halogen lights, our waterproof LED lights provide you with a luminous flux of 4000lm and White 6000K color temperature, for reliable performance of up to 50,000 hours.
- โ๏ธ ADJUST YOUR PLOW LIGHT KIT TO YOUR NEEDS: Select Hi/Low beam, dynamic turn, front position, and rear position LED lighting. Increase the efficiency of your pickup truck, garbage truck, municipality truck, tow truck or construction vehicle.
- โ๏ธ THE BEST LED LIGHTS FOR HARSH WEATHER: We make our LED lights of Aviation aluminum 6063, to offer you the IP68 waterproof, anti-freeze, anti-ice, long-lasting lamps you need for your off-road snowblower truck.
- Includes integrated 6-pin DT connector with blunt-cut adapter
- Die-cast aluminum housing and heavy-duty lens are ideal for the harshest environments
- Regulations/Standards: FMVSS 571.108
- SAE UB3
- 2-year warranty
- Head light and turn signal kit for snow removal vehicles.
- Includes high and low beam function.
- Low-profile housing.
- Easy-to-replace sealed halogen beam and turn signal bulb.
- 1/2" diameter, adjustable-ball mounting stud.
- Product Type:Auto Part
- Item Package Dimension:32.257 cm L X 29.972 cm W X 20.828 cm H
- Item Package Weight:4.036 kg
- Country Of Origin: United States
- Total Height-5.1 inch. Total Depth-5.7 inch. Total Width-10.98 inch
- All Inclusive Kit: This 12VDC, snowplow amber and clear light kit contains everything you need to get your snowplow lights road ready and meeting DOT requirements
- Easy To Install: The dual beam halogen headlamps feature single and double post mounts designed to mount directly to your plow frame; Headlamps come with low beam, high beam, and parking/turn signal light
- Lighting Accessories: Buyers' line of stick-on reflectors, LED truck lights, work lights, and warning lights are perfect for large commercial, utility and construction vehicles as well as UTVs, ATVs and everything in between
- We Do Things The Right Way: We design products like weโre building them for ourselves, because we are; Our teams are staffed with engineers and experts who know how to make a product exceptional
- Durable and Dependable: Founded in 1946, Buyers Products has become a leader in the truck equipment industry though our commitment to customer care, innovation, and value across our range of products
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24E-036
The information contained in this report was submitted pursuant to 49 CFR ยง573
Manufacturer Name : Submission Date :
Hiniker Company MAY 06, 2024 NHTSA Recall No. : 24E-036 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : Hiniker Company Address : 58766 240th Street
Mankato MN 56001
Company phone : 625-6621
Population :
Number of potentially involved : 1,016 Estimated percentage with defect : NR
Equipment Information : Brand / Trade 1 : Hiniker
Model : Series 700, Series 2000, Series 6000, Series 7000, Series 8000, Series 9000,
Series 9500
Part No. : HTBX 38828015
Size : 11.25″ L x 1.75″ D x 5.25″ W
Function : snowplow
Descriptive Information : Basis: review of warranty claims and review of motherboard by an electrical engineer. The recalled products differ because they have a hotbox with the motherboard at issue, while those not being recalled do not.
Production Dates : JUL 21, 2023 – FEB 06, 2024
Description of Defect :
Description of the Defect : The designer of the motherboard designed an electrical circuit that may not be adequate to carry the electrical amperage that may be experienced in certain operating conditions or with certain installations. This is thought to be due to the specified diode and wire gauge.
FMVSS 1 : 108 – Lamps, reflective devices, and assoc. Equipment FMVSS 2 : NR
Description of the Safety Risk : Overheating of the motherboard under certain conditions might cause the
plow lights and the lights on the plow truck to malfunction, and it might cause the plow controls to malfunction.
Description of the Cause : An electrical circuit that may not be adequate to carry the electrical amperage that might be experienced in certain operating conditions or with certain installations. This is thought to be due to the specified diode and wire gauge. Identification of Any Warning
that can Occur : Part 573 Safety Recall Report 24E-036 Page 2 Involved Components : Component Name : motherboard
Component Description : A main printed circuit in an electronic device Component Part Number : 38828017 Supplier Identification : Component Manufacturer Name : Ninja Circuits Address : 1651 Pohl Road
Mankato Minnesota 56001
Country : United States Chronology :
Following a higher than expected rate of warranty claims in 2024, Hiniker investigated the matter and, on April 29, 2024, received an electrical engineering opinion that the specified diode and the specified wire gauge were insufficient to handle the amperage that could be experienced under certain operating conditions or with certain installations. This could result in failures owing to the overheating’s affecting the plow lights and the vehicle lights. Description of Remedy :
Description of Remedy Program : Hiniker is working with an electrical engineering firm to develop a
redesigned motherboard. When the newly designed component has passed testing, placement components will be supplied to the field along with details on reimibursement. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : NR The affected model is no longer in production. Recall Schedule :
Description of Recall Schedule : NR Planned Dealer Notification Date : NR – NR The information contained in this report was submitted pursuant to 49 CFR ยง573 Part 573 Safety Recall Report 24E-036
Page 3
The information contained in this report was submitted pursuant to 49 CFR ยง573 Planned Owner Notification Date : NR – NR Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or installation in new motor vehicles or new items of motor vehicle equipment:
Name : NR Address : NR
NR Country : NR Company Phone : NR
* NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.