| โThis site contains affiliate links for which OEMDTC may be compensatedโ |
June 12, 2024 NHTSA CAMPAIGN NUMBER: 24V431000
Washers Missing from Seat Anchorage/FMVSS 222
Without reinforcement, the seat assembly anchorage can detach, allowing the seat to move during a crash and increasing the risk of injury.
NHTSA Campaign Number: 24V431
Manufacturer Endera Motors
Components SEAT BELTS
Potential Number of Units Affected 180
Summary
Endera Motors (Endera) is recalling certain 2021-2024 Titan school buses. The seat assembly may have been installed without reinforcing washers on the floor anchorage bolt. As such, these vehicles fail to comply with Federal Motor Vehicle Safety Standard number 222, “School Bus Passenger Seating and Crash Protection.”
Remedy
Dealers will inspect and install the reinforcing washers to the floor bolts, as necessary free of charge. Owner notification letters are expected to be mailed by August 16, 2024. Owners may contact Endera customer service at 419-523-3593.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
We have received Endera’s proposed owner notification letter and it is currently under review. You will be notified of any changes or concerns once our review is complete.
Please be reminded of the following requirements:
Copies of all notices, bulletins, dealer notifications, and other communications that relate to this recall, including a copy of the final owner notification letter and any subsequent owner follow-up notification letter(s), are required to be submitted to this office no later than 5 days after they are originally sent (if they are sent to more than one manufacturer, distributor, dealer, or purchaser/owner).
Under 49 U.S.C. ยง 30112(a), it is illegal for anyone, including a manufacturer, distributor, dealer, or retailer to sell an item of equipment or vehicle that fails to comply with all applicable Federal motor vehicle safety standards.
As stated in 49 U.S.C. ยง 30118(f), submission of eight consecutive quarterly reports followed by three annual reports is required. As described in 573.7, submission of the first of eight consecutive quarterly status reports is required within one month after the close of the calendar quarter in which notification to purchasers occurs. Therefore, the first quarterly report will be due on, or before, 30 days after the close of the calendar quarter. The first of three consecutive annual status reports will be due on, or before, 1 year after the eighth quarterly report was submitted.
Chronology :
NHTSA performed the safety tests on the Titan Bus vehicle, and determined the failure of the pull test. Once notified, Endera Motors confirmed the findings with engineering, and worked out a resolution and notified the Recall team. Due to technical difficulties with the NHTSA portal, the process was delayed, but once resolved, the recall notice was submitted to NHTSA.
4 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| ENDERA | TITAN BUS | 2021-2024 |
2 Associated Documents
Recall 573 Report
RCLRPT-24V431-2538.PDF 213.687KB
Recall Acknowledgement
RCAK-24V431-8222.pdf 784.729KB
Latest Recalls Documents
Bestseller No. 1
Mr. Pen- Nuts and Bolts Set, 1/4"-20x1, 10 Sets, Stainless Steel, Hex Head Nut and Bolt Set, Flat & Lock Washers, Stainless Steel Bolts, 1/4 20 Stainless Steel Bolts, 1/4 Bolts and Nuts Set
- Mr. Pen nuts and bolts Set includes 10 complete sets of 1/4"-20x1" stainless steel bolts, hex nuts, and washers, providing a reliable solution for various fastening needs.
- Made from premium stainless steel, these components are rust-resistant and durable, ensuring long-lasting performance in indoor and outdoor environments.
- Each set is precisely crafted to fit securely, offering dependable strength for a wide range of construction, assembly, and repair tasks.
- The combination of flat and lock washers enhances stability, prevents loosening under vibration, and provides added security for your projects.
- Ideal for professionals and DIY enthusiasts, this set offers superior quality and versatility, making it perfect for furniture assembly, mechanical repairs, or crafting projects.
Bestseller No. 2
Vifmy 500PCS Internal Tooth Star Lock Washers, M2.5 M3 M4 M5 M6 M8 M10 M12 Quick Speed Locking Washers Assortment Kit, Steel Black Oxide Finish Push on Locking Washer
- Speed Locking Washers Size: Speed locking washers assortment kit contains 8 size types of washers, which are m2.5-8(100pcs),m3-9(100pcs),m4-12(70pcs),m5-14(60pcs),m6-16(60pcs),m8-18(50pcs),m10-20(30pcs),m12-25(30pcs),8 different sizes to meet different different sizes to meet different scenarios
- Steel Star Locking Washer: The star locking washer are made of high quality carbon steel material, which has high strength and can withstand certain loads and impacts, and can ensure the stability and working life of the star locking washer
- Star Locking Washer Function: The star locking washe is one of the indispensable elements in most mechanical equipment, it has a variety of roles in fixing, supporting and damping. It uses spring pressure to regulate reinforced shaped objects and is used to tighten and loosen threaded fittings. It can also be used to tighten parallel bars or ring gaps to make them stronger
- Wide Application: Internal tooth star lock washers are widely used in various fields, especially in machinery manufacturing, automobile manufacturing, shipbuilding, aerospace, rail transport and so on
- Convenient Storage: Each of the 8 different sizes of push on locking washer are individually stowed by type in an easy to carry clear case. Easy to store and use, so that the star locking washer will not be lost or mixed up during use
SaleBestseller No. 3
NEIKO 50432A Hex Nut Assortment Set | 150 Pc Nylon Locking Nuts | A3 Steel Hex Assorted Hardware Kit #10 & SAE | Metal Screw Nut for Bolts | Friction Lock Nut
- APPLICATION: A nyloc nut, also referred to as a nylon-insert lock nut, polymer-insert lock nut, retaining nuts, prevailing torque nut, or elastic stop nut, is a kind of locknut with a nylon collar that increases friction on the screw thread.
- SECURE FIT: Assortment of 150 standard fastening nylon lock nuts in 6 common SAE sizes for convenient all-purpose bolts used most ideal for professionals and DIYers to prevent loosening due to vibration and rotation.
- DURABLE: Self-locking nut with nylon collar replaces lock washers preventing unintentional moving bolts from coming out for a more secure and durable hold in furniture craftsmanship, construction, or automotive uses.
- QUALITY: High quality polymer-insert hex lock nuts resist turning, preventing nut from loosening under vibration and torque. Constructed of high hardness stainless steel to prevent warping and deforming.
- HARDWARE ORGANIZER: Extra sturdy compartmentalized plastic carrying case allows neat organization and convenient storage for any garage, work bench, toolbox, or on the go job sites. Included sizes: #10x24, 1/4"x20, 1/4"x28, 5/16"x18, 3/8"x16, 1/2"x13.
Bestseller No. 4
Hex Bolts and Nuts and Washers Assortment Kit, 496 Pcs Metric Hex Head Nuts and Bolts Kit, Stainless Steel Machine Screws Bolts Nuts Flat & Spring Lock Washers Set - M4 M5 M6
- Superb 304 Stainless Steel Material: Our hex head nuts and bolts and washers kits are made of high-quality 304 stainless steel, which has superior rust resistance, wear resistance, oxidation resistance, corrosion resistance, no deformation, high hardness and durability.
- Hex Bolts and Nuts and Washers Kit: The external hexagonal design makes the preloading contact area large, which can use a large preloading force, which is convenient for installation and disassembly in a small space. The bolts and nuts kit has a compact structure, is not easy to loosen, and has a relatively high load-bearing capacity.
- Equipped with Hex Nut and Two Kinds of Washers: The hex nut can make your installation more precise, fasten better and carry more load; flat washer can increase contact area, provide strong holding force and maximum clamping force; spring washer Used to provide tension and preload in joint assemblies.
- Wide Range of Uses: Suitable for various mechanical equipment, classified instruments, meters, household appliances, electronic products, communication products, locks, lamps, maintenance industries, etc. Ideal for professionals, maintenance personnel, carpenters, landlords, handymen, repairmen and more.
- Package Includes: 496 pcs in total, size includes: m4*12 mm, m4*16 mm, m4*20 mm, m4*30 mm, m5*16 mm, m5*20 mm, m5*25 mm, m5*30 mm , m6*16 mm, m6*20 mm, m6*30 mm, m6*40 mm, including corresponding nuts and two kinds of washers, the quantity is sufficient and the size is rich, meeting the needs of daily use.
SaleBestseller No. 5
QXSKSLH 1/4-20x1 Complete Set Hex Head Screw Bolts,Nuts,Fender Flat washers,Split Lock Washers,Fully Threaded, Stainless Steel 18-8๏ผ304๏ผ, Bright Finish (10Set)
- High quality: Made of high quality 304 stainless steel, with high chemical resistance and corrosion resistance.
- Thread Diameter: 1/4"; Thread Length: 1"; Thread Type: 20 TPI.
- Package Included: 10PCS Bolts, 10PCS Hex Nuts, 10PCS Flat Washers, 10PCS Lock Washers
- Precise threading: Each hex bolt in our set is precisely threaded, ensuring a snug fit and providing a secure hold for the components they fasten.These heavy duty hex nuts and bolts with full deep thread will provide a stronger and quicker torque than ordinary screws, which will make force evenly, not easy to slip and ensure long-lasting tightening force, you can use it with confidence.
- Versatile use: Our hex bolt sets are suitable for various applications, including automotive, machinery, construction, and more.
Bestseller No. 6
Metalsuberg 5/16" x 1" Hex Head Bolt by Color Galvanization with Nylon Lock nut and Large Size Washer Assortment Kit,Alloy Steel,Grade 5.(8pcs Pack)
- Thread Size: Diameter 5/16 inch-18 pitch, Length exclude head: 1 inch; Full thread.
- Material: Made of high quality Alloy steel to make Hex head bolts much more strength,durability, and reliability. Exterior finish: Color Galvanization to make surface more Resistant to Rust. there are no issues of biting death or thread damaging to compare with nonrust steel bolts in high and low temperature environments
- Bolt, Nut and flat washer pack up together as one unit for conviences to end user with easy installation experiences.
- Nylon Insert Hex Lock Nut have more strong and long lifetime for full course thread clamping force to avoid loose; large size flat washer apply for much more worse work conditions.
- This Hex head bolt,nut and washer Assortment Kit following up with ANSI standard and Our fasteners have passed many limit test requirements/quality control before selling out.they can widely use in different industries for fixing, please check the picture, size and self working condition clearly and choose right spec before you purchase it.please feel free to contact with us if you have any queries need our help.we will reply you soon and let your installation feeling more smoothly.
Bestseller No. 7
HELIFOUNER 360 Pieces 9 Sizes Internal Tooth Star Lock Washers, Quick Speed Locking Washers, Push Nuts, Speed Clips Retaining Clips Fasteners Assortment Kit
- ใSizesใM2, M2.5, M3, M4, M5, M6, M8, M10, M12 internal tooth star lock washers, total 9 sizes 360 pieces in a transparent box, different sizes can meet your different needs. Perfect accessories of shock absorption for machinery equipment. Easy to install and durable to use
- ใMaterialใHigh Quality 65Mn metal steel material which have good corrosion resistance in bad environment like high temperature, cold weather, and high humidity areas. They have superior rust resistance and excellent oxidation resistance, which can ensure long time using.
- ใFunctionใInternal tooth star lock washers provide spring force, grip sturdy, create more friction and resistance to rotation between the fasteners head and the substrate, which maintains the washer hard against the substrate and the bolt thread hard against the nut or substrate thread, creating more friction and resistance to rotation.
- ใWide ApplicationsใWidely used in machinery equipment, industrial production of shock absorption, can meet your different needs in daily life. Whenever you need us, please free to contact us, we will give you a professional service and reply you within 24 hours.
- ใPackageใ360 pieces 9 sizes in total, packed in a durable transparent box with label. It is easy to distinguish the size of the product, when you want to use a certain internal tooth star lock washer, you don't have to waste time buying it separately, you can choose the suitable one to meet all your needs.
Bestseller No. 8
Vifmy Spring Lock Washers Assortment Kit(1000 Pack), M2 M2.5 M3 M4 M5 M6 M8 M10 M12 Metric Split Lock Washer Set,304 Stainless Steel Lock Washers for Screws Bolts
- Spring Lock Washers: The metric spring lock washers assortment kit contains 9 sizes 1000 pcs, which are m2(200 pcs),m2.5(200 pcs),m3(200 pcs),m4(180 pcs),m5(80 pcs),m6(60 pcs),m8(50 pcs),m10(20 pcs),m12(10 pcs) ,9 different sizes of lock washers From furniture DIY to building construction, help you get the job done
- 304 Stainless Steel: 304 Stainless steel split lock washer are made of high-strength materials with good corrosion resistance and long service life. Compared to galvanised materials, the oxidation resistance, corrosion resistance and rust resistance are stronger, thus increasing the service life of the product
- Split Lock Washer Function: Split washer are mainly used for nuts, bolts and screws from rotating and loosening due to vibration and friction, and play a role in preventing loosening and fixing objects to ensure the stability of machines
- Convenient Storage: Each of the 9 different sizes of spring lock washers are individually stowed by type in an easy to carry clear case.Easy to store and use,so that the spring lock washers will not be lost or mixed up during use
- Wide Application: Spring washers are highly compatible with screws, nuts and bolts of the same size and can be used to connect moving parts or to prevent loose connections, such as in furniture repair, outdoor construction, and electrical maintenance
Bestseller No. 9
100Pcs 304 Stainless Steel Metric Lock Nut Assortment Kit Perfect for Lock Washers, Nylon Insert Locknut M3 M4 M5 M6 M8 M10 M12
- โ MULTIFUNCTIONAL ASSEMNLY KIT ------ Advanced 304 stainless steel nylon locking nut, 7 common sizes, general, convenient, easy to use, very suitable for professionals and DIY users. This suite is one of the few products on the market. It has high quality and better quantity. It is an economical and efficient choice.
- โ NYLON COLLAR ------ These lock nut manufactured with industrial strength, which can replace locking washers, prevent bolts from being exposed and provide better safety and firm fixation. Compared with locking washer, it has better performance because it is made of non-corrosive material.
- โ HIGH QUALITY ------ Have strong anti-rotation ability, which can prevent the locking nut from weakening and loosening under vibration and torque, thus reducing the clamping strength. Guaranteed intact, unswerving, almost indestructible.
- โ EASY TO STOREAGE ------ The rugged plastic box serves as a suitcase, allowing users to organize locking nuts in a neat manner according to size. It can also be stored in a garage, workbench or worksite as a convenient storage space. The transparency of the box allows users to check the quantity and inventory without opening the box.
- โ WHAT YOU GET ------ In this kit, You will get 100Pcs 304 Stainless Steel Metric Lock Nut Assortment Kit. It consists of M3 ( 25Pcs ), M4 ( 25Pcs ), M5 (15Pcs), M6 ( 15Pcs ), M8 (10Pcs), M10 ( 5Pcs ) and M12 ( 5Pcs ). Allocate more of the commonly used locking nuts.
Bestseller No. 10
Mr. Pen- Bolts, Nuts, and Washer Assortment Kit, 113 pcs, Assorted Nuts and Bolts, Washer Kit
- Package includes 36 bolts in 6 different sizes, 39 nuts in 3 different sizes, and 38 washers in 3 different sizes, meeting your various home repair needs.
- Mr. Pen bolts, nuts, and washers in this kit are all made of premium galvanized iron, providing excellent hardness and strength; they're also rust resistant, ensuring a longer service life.
- Our metric bolts and nuts assortment package includes a high-quality clear organizer box that keeps the bolts, nuts, and washers organized and categorized.
- Mr. Pen bolts kit, across most daily used sizes, can be widely applied to all kinds of precision machinery, classified instruments, electronic products, household appliances, communication products, locks, lamps, lights, toys, etc.
- Our bolt and nut kit is an ideal tool for home and workplace, professionals, amateurs, handypersons, repair men, woodworking, construction, furniture, 3D printing projects, communication equipment, ship assembly, and so on.
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.