| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA Campaign Number: 18V695
Manufacturer Yamaha
Motor Corporation, USA
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 4,736
Corrosion of Wiring may cause Loss of Control
If the engine does not return to idle when the throttle is released, it can lead to a loss of control, increasing the risk of a crash.
Summary
Yamaha Motor Corporation, USA (Yamaha) is recalling certain 2012-2013 Yamaha XTZ12 Super Tenere motorcycles. Over time, a gap may develop in the protective sealant where the lead wires of the accelerator position sensor (APS) and throttle position sensor (TPS) connect to the electronic control unit (ECU). This may cause corrosion on the wires, preventing the engine from returning to idle after the throttle is released.
Remedy
Yamaha will notify owners, and dealers will bypass the wire lead connection with a new sub lead harness multi-connector, free of charge. The recall is expected to begin in October 2018. Owners may contact Yamaha customer service at 1-800-962-7926. Yamaha’s number for this recall is 990122.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Miscellaneous Document – Initial NHTSA notification report XTZ12 Wire Harness
October 04, 2018
Loading...
Reload document 
Open in new tab
Recall Acknowledgement
October 22, 2018
Loading...
Latest Recalls Documents
- Formulated with Trizone technology to protect all 3 critical zones: engine, clutch and gearbox
- Race derived technology for maximum engine acceleration
- Extreme high temperature air-cooled performance and water-cooled engine performance
- Excellent shear stability to prevent viscosity breakdown
- Exceeds API SL and JASO MA-2
- 100% Synthetic Ester
- Formulated To Meet The Latest Manufacturers' Specifications
- Improved High Temperature Deposit Protection And Sludge Control
- Ensures Optimum Clutch Performance At Start-Up, Acceleration, And Full Speed
- Standards: Ape Sn, Jasso Ma2
- Optimal lubrication in all operating conditions, ensures low oil consumption
- Very high shear and ageing stability, highest levels of wear protection
- Tested and approved for catalytic converters, optimal engine cleanliness
- Ideally suited for wet clutches
- Specifications and Approvals: API, SM, ACEA A3-04, JASO, MA2
- Full synthetic 5W-40 diesel engine oil with Triple Protection Plus technology protects against wear, deposits, and oil breakdown
- Improved wear performance with significantly increased level of protection against harmful engine wear (compared to previous generation API CJ-4 engine oils)
- Enhanced fuel economy capability of 1.5% without compromising engine protection or durability (compared to 15W-40 oils)
- Multi-functional dispersant additives provide an enhanced level of protection against the effects of soot, dirt, and other contaminants
- Resists breakdown by heat to provide continuous protection throughout the service interval, and also provides improved low-temperature flow compared to conventional 15W-40 oils
- The information below is per-pack only
- ADVANCED PROTECTION IN EUROPEAN VEHICLES agains the four main causes of engine breakdown: wear friction heat and deposits
- EXTRA WEAR PROTECTION vs. industry and OEM standards with advanced anti-wear additives
- SUPERIOR PERFORMANCE FOR EUROPEAN gasoline and diesel engines
- EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your engine no matter the climate or driving conditions
- 100% Synthetic Double Ester
- Designed for highly modified engines
- Electrochemical bonding to metal parts
- Up to 5x higher film strength
- 0% shear loss on Bosch ASTM D6278 test
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.