| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA Campaign Number: 18V884
Manufacturer Blue Bird Body Company
Components SERVICE BRAKES, HYDRAULIC, POWER TRAIN
Potential Number of Units Affected 5,169
Fuel Hose or Brake Line Fluid Leak
A hydraulic brake fluid
leak or a fuel line failure can increase the risk of a fire.
Summary
Blue Bird Body Company (Blue Bird) is recalling certain 2013-2020 Blue Bird Vision school buses equipped with the Ford 6.8L V10 engines. The hydraulic brake lines or transmission shifter cable may have been improperly routed, causing the brake line to be exposed to excessive heat, and leak hydraulic brake fluid. Additionally, the transmission shifter cable could contact the gasoline fuel supply line to the engine which may result in a fuel leak.
Remedy
Blue Bird will notify owners, and dealers will install a bracket which will insulate the brake lines from excessive heat, control routing of the brake lines, and secure the transmission shifter cable away from the fuel line, free of charge. The recall is expected to begin February 12, 2019. Owners may contact Blue Bird customer service at 1-478-822-2242. Blue Bird’s number for this recall is R19ZV-SB.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Recall Acknowledgement
February 5, 2019
Loading...
Reload document 
Open in new tab
Latest Recalls Documents
- Provides an extra margin of safety in extreme braking conditions
- Mix of polyglycol ethers ensures hot brake-system operation will not create dangerous vapor
- Excellent for ABS, disc and drum brake systems
- Delivers braking power when needed by avoiding a spongy pedal
- Both wet and dry boiling points exceed the minimum government standards
- High compatibility. Use with or direct replacement for DOT 3, DOT 4, and DOT 5. 1
- Extended Service Interval (ESI): Lasts 100 percent longer than DOT 3, 50 percent longer than DOT 4, and 10 percent longer than DOT 5. 1
- Exceeds all DOT 3, DOT 4, and DOT 5. 1 standards
- Wet boiling point ~ 365 DegreeF/Viscosity at -40 DegreeC ~ 685mm2/s
- Standard brake fluid has a recommended change interval of 2 years. The recommended change interval for Bosch ESI6 is 3 years.
- The 336⁰F wet boil point and 521⁰F dry boil point exceeds common characteristics for DOT 4 brake fluids
- Provides corrosion protection in brake components
- Matches needs of all DOT 4 manufacturer recommendations
- Compatible with all DOT 3 and DOT 4 applications
- Helps provide protection against brake failure from vapor lock
- Helps prevent corrosion in brake system
- Works with all brake system requiring DOT 3 fluids
- Exceeds federal motor vehicle safety standard No. 116
- Meets SAE spec. J1703.
- Premium DOT 3 Brake Fluid has a minimum boiling point of 450°F
- Meets and exceeds DOT 3 and all other Federal and SAE specifications and standards for motor vehicle brake fluids
- Mixes with all DOT 3 approved brake fluids
- Designed for use in disc, drum and ABS brake systems
- Premium brake and hydraulic clutch fluid that protects internal components from corrosion under normal use
- High boiling point to minimize brake fluid boiling and vapor lock
- Excellent low temperature capability and stability when used where lower cold viscosities are required
- Excellent low temperature capability and stability when used where lower cold viscosities are required
- Synthetic quality brake fluid
- Contains special ingredients to guard against vapor lock and moisture absorption
- Exceeds requirements for both DOT 3 and DOT 4 brake fluids
- Specially formulated for DOT 4 brake fluid applications
- Designed for use in disc, drum and ABS brake systems
- Maintains proper movement for safe, effective stopping performance
- Helps deliver a quieter braking system
- Produces smoother pedal travel
- Provides longer brake life and performance
- Install Wagner with total confidence
- An exclusive European formula with an exceptionally high boiling point and superior anti-vapor lock characteristics
- Superior braking during arduous conditions like racing and rallying
- Typical wet boiling point is 270deg. C
Last update on 2025-04-16 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.