| “This site contains affiliate links for which OEMDTC may be compensated” |
January 11, 2019 NHTSA CAMPAIGN NUMBER: 19V029000
Insufficiently Tightened Brake Caliper Bolts
Loose brake caliper mounting bolts can reduce brake effectiveness, increasing the risk of a crash.
NHTSA Campaign Number: 19V029
Manufacturer Double K Inc.
Components SERVICE BRAKES, AIR
Potential Number of Units Affected 5
Summary
Double K Inc. (Double K) is recalling certain 2017-2018 Hometown Trolley Villager, Mainstreet, and Steetcar trackless trolley buses, built on a Daimler trucks
North America (DTNA) Freightliner chassis. The brake caliper mounting bolts may have been insufficiently tightened.
Remedy
Double K will notify owners, instructing them to contact a DTNA dealer to have the brake caliper mounting bolts checked and tightened, free of charge. The recall began February 11, 2019. Owners may contact Double K customer service at 1-715-478-5095 or DTNA customer service at 1-800-547-0712. Double K’s number for this recall is FL794A-V.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
01/11/2019
Safety Recall Notification 19V-029
FL794A-V
Brake caliper mounting bolts may be incorrectly torqued
This notice is sent to you in accordance with the requirements of the National Highway Traffic and Motor Vehicle Safety Act.
Double K Inc. has been notified that a defect, which relates to motor vehicles safety, exists in a small number of model year 2017-2018 Villager, Mainstreet and Streetcar model Trolleys, manufactured by Double K, Inc. dba Hometown Trolley.
During the production time periods ofNovember of2017 through October 201 8, trolleys vehicles equipped with certain air disc brakes assembled from the York Manufacturing Plant with these brake caliper mounting bolts might be affected. Our records show that you own the vehicle (s) with the vehicle identification number— This decision was based on the information that was provided to us by Daimler Trucks North America.
IMPORTANT!
- Your brake caliper mounting bolts might be incorrectly torqued.
- You should immediately contact your Daimler Trucks Facility for immediate repair.
The Safety issue is:
On certain vehicles, the brake caliper mounting bolts may be incorrectly torqued. This could result in caliper bolts loosening. A caliper with loose mounting bolts may lead to reduced effectiveness.
Insufficiently torqued bots may not provide an adequate clamping force between the brake caliper bolts loosening. Reduced brake effectiveness could lead to a vehicle crash.
What we are asking you to do:
-Immediately locate and visually inspect the affected unit(s) in your fleet.
-Contact your Daimler Trucks North America authorized facility for repairs. Current owners to contact an authorized Daimler Trucks North America dealer to arrange to have the recall performed and to ensure that parts are available at the dealership. To locate an authorized dealer, search online at www.daimlertrucksnorthamerica.com. On the menu tab, select “contact” then scroll down to “find a dealer” and select the appropriate brand.
-Potentially affected vehicles will be inspected and the caliper bolts will be torqued as necessary. *Brake caliper mounting bolts will be checked and tightened, free of charge.
Additional information is available by calling the Daimler Trucks North America Customer Service at 1-800-457-0712 with recall number 19V-030 and FL794A-V
Daimler Trucks North America LLC
United States
4747 N. Channel Ave
Poniand, OREGON 97217
You may also contact Kristina Dunow at Double K Inc., at 1-715-301-0149 or Kristina@hometownmfg.com if you should have any problems or questions.
Changed address or sold the vehicle?
If your address has changed, or if you have sold the vehicle, please complete the last section of this letter, signed and dated the fax to Double K Inc. so we can update our records. Our fax number is 1-715-4785095.
This information will be used to notify the new owner of this recall. If you have leased this vehicle to another person or organization, you must forward this letter to the lessee within 10 days.
If you require any further assistance, please call 1-715-301-0149. Please have your vehicle identification number ready for our representative when you call.
Should Daimler Corporation or Double K, Inc. fail or be unable to remedy the situation you may contact:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey Ave. S.E.,
Washington, D.C. 20590
Or call the toll-free Vehicle safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153) or go to https://www.safercar.gov
We apologize for this situation and want to assure you that, with your assistance, we will correct this condition. Your safety and satisfaction with your Hometown Trolley product are important to us and we regret any inconvenience to you.
Best Regards,
Kristina Dunow
President
Double K Inc
Double K Inc., 750 Industrial Parkway. Crandon, WI 54520
6 Affected Products
Vehicles
| HOMETOWN TROLLEY | MAINSTREET | 2017-2018 |
| HOMETOWN TROLLEY | STREETCAR | 2017-2018 |
| HOMETOWN TROLLEY | VILLAGER | 2017-2018 |
5 Associated Documents
Owner Notification Letter(Part 577)
RCONL-19V029-5733.pdf 1014.171KB
Loading...
Reload document 
Open in new tab
Recall Acknowledgement
RCAK-19V029-1337.pdf 245.852KB
Loading...
Defect Notice 573 Report
RCLRPT-19V029-4754.PDF 212.618KB
Loading...
Recall Quarterly Report #1, 2019-1
RCLQRT-19V029-5572.PDF 211.138KB
Loading...
Recall Quarterly Report #2, 2019-2
RCLQRT-19V029-0008.PDF 211.24KB
Loading...
Latest Recalls Documents
- PRECISION - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.
- DURABLE - Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
- LONG-LASTING - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.
- PERFORMANCE - Features an easy-to-read, highlighted yellow print dual-range scale. Identify the markings even in low-light conditions.
- COMFORTABLE - Comes with a reversible ratchet head that drives in both directions and measure torque in a clockwise direction.
- Durable Ratchet Head: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V) Corrosion-Retardant: Satin Finish. Made in Taiwan
- Easy Storage: A sturdy plastic storage case is included. Non-Slip Grip: Knurled handle
- Easy to Read: High Contrast & Dual Range Scale. Accurate: Pre-Calibrated to ± 4%
- Accessories included: 1/2" Drive 5" long Extension Bar
- Simple and Reliable: “Click” sound tells the preset torque value is reached. Stop applying force when you hear and feel it.
- High Precision and Quick Reading: 3/8 torque wrench has high contrast and dual range scale( 5-45 Ft-Lb/6.8-61 Nm),making it clear and easy to read. We have professional torque wrench production technology, and after 20000 tests, the calibration error range of the torque wrench is around 3%, making it an essential helper for you
- Safe and Reliable Operation: Equipped with a bidirectional drive ratchet head, torque can be measured clockwise or counterclockwise. When the set torque value is reached, a "click" sound will remind you to stop applying force to prevent damage to the item due to excessive torque
- Good Quality and Durable Material: Made of hardened chromium vanadium steel alloy (Cr-V). At the same time, the bottom buckle tail plug adopts a red anodizing process to improve the product's oxidation resistance during use and enhance surface wear resistance. 72 tooth ratchet head, made of chromium molybdenum steel.We use the quality materials which are resist corrosion and are durable
- Quick Torque Setting: Simple and fast torque setting, pull down the locking knob and hold it down to rotate to the torque you need. Release the hand and the locking knob will automatically rebound to lock the torque value. And the designer referred to the appearance of the flashlight handle and designed a non slip and labor-saving knurled handle, making it more comfortable and easy to hold when using
- Easy to Store and Widely Use: You will receive the 3/8-inch drive click torque wrench with a sturdy plastic shell storage box, which is very delicate and durable. Torque wrench is suitable nuts and bolts on various occasions, such as bike, motorcycle, car spark, and torque wrench is suitable for repairing cars and motorcycles, which are essential maintenance tools for car owners
- Portability: durable case for portability or storage
- Added comfort: bi-material handle for comfort and grip
- Hassle free use: locking feature adjusts quick and easily for hassle free use
- Quick identification: scales stamped into housing showing inch and metric torque setting
- Meets or exceeds ASME specifications
- Includes 1-pc. 3/8 in. drive torque wrench; Storage case; Product manual with torque conversion chart
- Wrench emits a click that can be heard and felt when the preset value is reached
- Permanently marked, high-contrast dual-range scale is easy to read, even in low light
- Reversible ratchet head drives in both directions and measures torque in clockwise direction
- Durable all-steel construction has no plastic parts to break or wear out
- 3Pcs Torque Wrench Set: The calibration error range is around 3%, each torque wrench has a calibration certificate. The 3-in-1 torque wrench set can meet your different needs. Including 1/4 inch 20-240 in.lb, 3/8 inch 5-45 ft.lb, 1/2 inch 20-160 ft.lb.
- Safe and Reliable: When the 1/2 torque wrench reaches the preset torque value, it makes a clear "click" sound, accompanied by an obvious hand vibration that reminds you no longer to apply force, prevent damage caused. 72-tooth reversible ratchet head, it can be used both clockwise and counterclockwise directions.
- Quick Release Button: This 3/8 torque wrench has a quick release button with which accessories can easily be installed and removed, the accessories can grip and is not easy to fall down. It is more convenient to use. The torque wrench is made of CR-MO with a higher hardness.
- Easy to Set: First pull down the locking knob and hold it down and then start setting the desired torque value. Release the hand and the locking knob will automatically rebound to lock the torque value. If you do not use, please set the torque key to the minimal torque value.
- Widely Use: The torque wrenches can satisfy you in bicycle, motorcycle, car, truck and wheel screws, wheel nuts and in the device installation, electrical engineering, etc. We insist on bringing customers a good shopping experience.
- ±3% HIGH PRECISION AND COOL APPEARANCE: 1/2 inch drive torque wrench (10-170ft.-lb/13.6-230.5Nm)has a calibration error range of ±3%, high precision, and comes with a corresponding serial number, which is easy to trace the original data, and you can use it with confidence.Hairich torque wrench not only has superior quality but also has a superior appearance. The classic combination of black and red is fashionable and textured, allowing you to enjoy a visual feast during use.
- PREMIUM MATERIAL AND DURABLE: Experience the ultimate durability and antiskid with the torque wrench. The main body of Hairich torque wrench set is made of chrome vanadium steel alloy, which is more strong and more durable. The head of the inch-pound torque wrench adopts a ratchet design with a reversing device to improve work efficiency. The square knurled handle is made of aluminum titanium alloy, which is ergonomic and comfortable to hold for long-time use.
- DUAL SCALE AND QUICK SETTING: Laser Printed by dual-range（ft-lb and Nm). Our professional torque wrench is easy to read and provides direct unit conversion, When the set torque value is reached, the torque wrench will make an audible and felt click to remind you to stop applying force. Pull down the lock knob and hold it until the torque setting is completed. Release the hand, and the lock knob will automatically rebound back to lock the value.
- ERGONOMIC DESIGN AND POWERFUL: Every design of our industrial torque wrench conforms to ergonomic, easy to handle.72-tooth ratchet, 5° ratcheting arc head, a quick-release button for easy loading and unloading, and an aluminum non-slip handle for excellent grip and control. A recent research review that, 72-tooth ratchets are very professional tooth ratchets, you just only rotate 5 degrees to finish it. Not easy to slip and wear, can be used in small spaces, and is more durable and powerful.
- EASY OPERATION AND SAFETY: Thanks to its bidirectional drive ratchet head, our torque wrench can be measured both clockwise and counterclockwise. When the set torque value is reached, a "click" sound will remind you to stop applying force to prevent damage to the item due to excessive torque. Notice: At low Nm settings under 5 Nm the "click" sound can be too light to hear.
- Please contact us on Amazon Seller Support, we can give you 24h online after-sale service if you have any problem. We hope to help you solve and make you satisfied.
- !!!Attention!!!: 1,Torque wrench cannot be used to remove the nut, because the sudden torque for removing is much higher. 2,Keep the set value proper, avoid to set a small value but actual needs a bigger value, this can break the wrench 3, When not in use, always keep torque at the lowest setting. 2,when in use,keep the direction select in leftmost or rightmost position, not middle. 3,use just proper size socket and right direction button in case of skipping. 4,keep all the package well in case of returning in the future. 5,do not use excessive force during use to avoid affecting the accuracy of torque and even damaging the wrench.
- 【Easy to use】: Our torque wrench 1/2 feature high contrast and dual unit measurement for easy reading and setting of the required torque.Turn the bottom knob to make it in unlocked state, then turn the handle to set the torque, and finally lock the bottom knob.Adjusting the head paddle allows the 1/2 inch torque wrench to be used in both directions.
- 【Safe and reliable】: When the set torque value is reached, the automotive torque wrench will emits "Click" sound to remind you to stop applying force to prevent over torque damage to your items. Also the knurled handle provides non-slip operation.
- 【Practicality of accessories】: 1/2 inch Torque wrench set with 5-Inch extension bar and 1/2" drive to 3/8" drive adapter,which can help to take the screw or nut out in deep space.Use this dual direction torque wrench can easy to deal with car or bike repairing problem.
- 【High Precision & Easy Reading】With a dual-range scale of 20-240 in.lb/2.3-27.1 Nm, this inch pound torque wrench provides quick and precise readings, ideal for precision tasks in electronics, bicycles, and light machinery requiring lower torque levels.
- 【 "Click" Type】The 'Click' Type design of torque wrench produces a distinct sound or sensation to indicate when the fastener is properly tightened. When using the 1/4 torque wrench, turn it slowly, steadily, and smoothly, stopping when you hear or feel the click.
- 【Durable Construction】The aluminum shaft of this bike torque wrench offers superior fatigue resistance for higher and more precise usage compared to traditional materials. It also features a high-quality steel spring and chromium-molybdenum steel handle for rust prevention, ensuring durability and a longer lifespan.
- 【Easy Torque Setting】To set the torque value, pull down and hold the locking knob, then adjust to the desired value. Release the knob to lock the torque setting. When not in use, set the torque key to the minimum value to maintain the bicycle torque wrench.
- 【Convenient Storage & Versatile Use】This torque wrench set comes in a sturdy plastic shell storage box for convenient storage and organization. It is suitable for repairing various parts of a bicycle, including bolts, nuts, threaded components, handlebars, frames, brakes, and derailleurs. Additionally, it is backed by a 24-month warranty, with customer support available for any assistance needed.
- [𝐌𝐀𝐓𝐄𝐑𝐈𝐀𝐋] SUZUME torque wrenches are made of CR-V steel to ensure the durability of the torque wrench. The surface is also chrome-plated, which not only improves corrosion and wear resistance, but also gives the torque wrench set automotive a mirror-like luster, adding a touch of eye-catching beauty. For the handle, we chose a lightweight aluminum alloy, whose low-density characteristics greatly reduce the overall weight of the tool, making it easier to operate.
- [𝐇𝐈𝐆𝐇 𝐀𝐂𝐂𝐔𝐑𝐀𝐂𝐘]The SUZUME 3PCS torque wrench set, covering torque wrench 1/2 drive,torque wrench 3/8 drive and 1/4 torque wrench, is each a commitment to superior workmanship. After rigorous fatigue testing, this torque wrench kit can withstand more than 10,000 repeated uses and still maintain an incredible ±3% accuracy, which means you can use them with confidence and without worrying about re-calibration.
- [𝐋𝐨𝐮𝐝 𝐂𝐥𝐢𝐜𝐤] SUZUME torquimetro are designed with a bi-directional ratchet head that makes it easy to apply precise torque, whether you operate the wrench clockwise or counterclockwise. When your operation reaches the preset torque value, the wrench will immediately emit a clear "click" sound, accompanied by a vibration, to ensure that you can sense and stop the operation at the first time, avoiding damage to bolts, nuts and even torque wrench' due to excessive application of force.
- [𝐃𝐮𝐚𝐥-𝐒𝐜𝐚𝐥𝐞𝐬] precision at a glance! SUZUME strives for perfection in every detail of every product. Every click torque wrench is equipped with a clearly visible torque scale that makes setting and reading torque values effortless. We use laser printing technology to ensure the durability of these scales, so you don't have to worry about the values becoming blurred by wear and tear, even under frequent use over a long period of time.
- [𝐒𝐞𝐫𝐯𝐢𝐜𝐞]We understand that superior products and service are the key to earning your trust. That's why SUZUME products are backed by a comprehensive aftermarket service, our commitment to quality and your peace of mind. Our mission is very clear - 'Your Reliable Tool Partner' Our team will respond promptly to any questions you have and resolve your queries and problems quickly.
Last update on 2025-04-16 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.