โThis site contains affiliate links for which OEMDTC may be compensatedโ |
January 16, 2019 NHTSA CAMPAIGN NUMBER: 19V037000
Fuel Pump may Leak at Electrical Connection
A fuel pump leak from around the electrical connection area has an increased risk of a fire.
NHTSA Campaign Number: 19V037
Manufacturer KYMCO USA
Components FUEL SYSTEM, GASOLINE
Potential Number of Units Affected 910
Summary
KYMCO USA (KYMCO) is recalling certain 2018-2019 Like 150i motorcycles. The fuel pump may leak fuel from the electrical connection area when the tank is full.
Remedy
KYMCO will notify owners, and dealers will replace the fuel pump, free of charge. The recall began March 19, 2019. Owners may contact KYMCO customer service at 1-888-235-3417.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Recall Code # Like150-2019-Recall-Kit
NHTSA # 19V037
LIKE 150I FUEL PUMP REPLACEMENT PROCEDURE
Step: 1
Tools needed: Phillips head screwdriver, flat screwdriver, 8mm & 10mm socket w/ ratchet, a torque wrench with a usable range of 0-30 lbf.in w/ 7mm socket, and a 6โ scale.
Step: 2
Remove the fuel pump cover using the Phillips head screwdriver to loosen the 2 screws on the cover and use a flat screwdriver to open the cover.
Step: 3
Remove the right rail using the Phillips head screwdriver to loosen the screw on the rear end of the right rail and the right side of the leg shield as indicated in figure โAโ. Use the flat screwdriver to open the plastic buttons as indicated in figure โBโ.
Push the right rail forward and remove the right rail.
Step: 4
Disconnect the coupler of the fuel pump terminal. Use the flat screwdriver to disconnect the fuel pump terminal coupler and push forward to release the main wiring.
Step: 5
To remove the fuel pump, loosen the high-pressure fuel tube clamp and remove the fuel tube. Remove the 6 screws and take out the fuel pump. Insert fuel pump replacement, tighten the six screws with the sequence marked 1 โ 2 โ 3 โ 4 โ 5 โ 6 at torque 25ยฑ5 lbf-in. Position the fuel line back in place and tighten the clamp to 18-23 lbf-in, the clamp end should expose 7 steps (measured at approximately 9/16โ). Please confirm the torque by hand pulling as an extra precaution.
Step: 6
Testing the fuel pump replacement:
Turn on the main switch, start the engine, let the unit idle for about 2 minutes, open the throttle slightly, check for leaks, if no leak is present after 5 minutes, re-assemble the unit.
Customer Name
Street Address
City, State Zip Code
IMPORTANT VOLUNTARY SAFETY RECALL
This notice applies to your vehicle VIN:
XXXXXXXXXXXXXXXXX
February 2019
NHTSA Recall# 19V037
Voluntary Safety Recall: KYMCO Like 150i, Potential leaking from the high- pressure electric fuel pump.
Dear Customer name here,
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
What is the reason for this notice?
Kwang Yang Motor Co., Ltd. (KYMCO) is voluntarily recalling all 2018 model year and select 2019 model year โLike 150iโ units. These units have a high-pressure electric fuel pump that may leak fuel through the rubber plug around the electrical wiring inside the fuel pump when the fuel tank is overfilled. When overfilled, the high pressure in the tank may result in leaking fuel and potential fire.
What your Dealer will do.
Your KYMCO Dealer will repair your vehicle free of charge for parts and labor. Repair will include the replacement of the Fuel Pump. The replacement of this component will take up to one (1) hour.
What you should do.
You must cease operation of this vehicle immediately and schedule an appointment for the repair of your vehicle with an authorized KYMCO dealer as soon as possible. If you are not able to visit the dealer you purchased unit from, please go to www.kymcousa.com and click on โDealer Locatorโ to locate your nearest dealer. If you need further assistance, please see โAdditional contact informationโ on page 2.
Additional contact information:
Toll-free at (888) 622-0781 between 9 a.m. and 5 p.m. ET Monday through
Friday, email like1502019recall@kymcousa.com, or online at www.kymcousa.com and click on โRecall Informationโ tab at the bottom of the home page, for more information.
Who to contact if you experience problems.
If you are not satisfied with the service you receive from your authorized KYMCO dealer, you may contact:
KYMCO USA, Inc.
Attention: Customer service department
5 Stan Perkins Rd.
Spartanburg, SC 29307 (888) 622-0781
like1502019recall@kymcousa.com
If you believe that KYMCO USA, Inc. or the KYMCO Dealer has failed to remedy the defect on your vehicle free of charge and within a reasonable time, (60 days from the time you scheduled this repair with your dealer) you may submit a complaint to:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey Ave., SE
Washington, DC 20590
Or contact the Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
We apologize for any inconvenience caused by this voluntary recall.
Kindest regards,
KYMCO USA, Inc.
2 Affected Products
Vehicle
KYMCO | LIKE 150I | 2018-2019 |
9 Associated Documents
Manufacturer Notices(to Dealers,etc)- February 2019
Remedy Instructions and TSB
RCRIT-19V037-3651.pdf 2598.027KB
Recall 573 Report- Amendment 2
RCLRPT-19V037-7524.PDF 214.219KB
Recall Acknowledgement
Defect Notice 573 Report
RCLRPT-19V037-9921.PDF 214.219KB
ISSUED Owner Notification Letter(Part 577)
RCONL-19V037-0348.pdf 65.792KB
Recall Quarterly Report #1, 2019-1
RCLQRT-19V037-7272.PDF 211.129KB
Recall Quarterly Report #2, 2019-2
RCLQRT-19V037-1949.PDF 211.228KB
Recall Quarterly Report #3, 2019-3
RCLQRT-19V037-5917.PDF 211.309KB
Latest Recalls Documents
โThis site contains affiliate links for which OEMDTC may be compensatedโ |
- The worldโs #1 fuel additive for both gasoline and diesel engines
- A great tune-up in a bottle โ treats gasoline, diesel fuel and increases MPG
- Cleans and lubricates the fuel system, including fuel injectors, carburetor and combustion chamber
- Improves fuel economy by burning excess exhaust emissions
- Increases power and acceleration by improving fuel flow and reducing deposit buildup
- ALL-ROUND ENGINE SOLUTION - Works in all engines and all fuels, making it the ideal fuel treatment and stabilizer for any vehicle or gas powered tool
- ETHANOL PROBLEM SOLVER - Prevents and cures most ethanol-related issues, including poor performance and decreased fuel economy
- OLD FUEL REVITALIZER - Stabilizes fuel up to 2 years and can help rejuvenate old, sub-spec fuel, even after months of inactivity
- FUEL ECONOMY MAXIMIZER - Removes and prevents gum, carbon deposits, and varnish build-up, resulting in improved fuel economy
- WATER BUILD-UP PREVENTION - Disperses water throughout fuel as submicron-sized droplets that are safely eliminated while the engine operates
- Restores fuel economy
- Stabilizes ethanol
- Maximizes horsepower
- Improves responsiveness
- For use in both gasoline and diesel engines
- Save gas by keeping fuel intake system clean
- Helps restore performance
- Removes deposits from entire fuel system
- Helps inhibit corrosion
- Compatible with cap-less fuel tanks
- Clean fuel injectors and keeps them clean
- Reduces intake valve deposits and combustion chamber deposits
- Lubricates critical components in the fuel system and engine
- Stops knocking and hesitation
- Lessens oil contamination in older engines
- Includes AR6500 Diesel Treatment (40 oz)
- Includes AR6400-D Diesel Fuel System Cleaner
- Restore key fuel system components - injectors, turbo & dpf
- Boost cetane, improve performance and MPG
- AR6400-D is not the remedy for HEUI injector stiction. Please use AR9100 Friction Modifier instead
- SeaFoam SF-16 Motor Treatment 16 oz. Can (3)
- Contains 100% High-Energy Solvent Technology
- Helps Keep Injectors Or Carb(S) And Intake Ports And Valves Clean
- Quickly Disperses Moisture And Dissolves Gum, Varnish, And Other Fuel Residues
- Disperses Moisture In Conventional Gasoline
- FIXES ROUGH RUNNING ENGINES โ STA-BIL Fast Fix eats away at gum and varnish that cause rough starts and no starts in your small engine equipment. This easy-to-use fuel additive combats the effects of ethanol blended gasoline
- ELIMINATES WATER โ This fuel injector cleaner helps to remove water that may get into your fuel system. Penetrating deep into the fuel line, this simple fuel additive prevents the need to disassemble the engine. The 8 oz. bottle of this alcohol-free fuel additive treats up to 20 gallons of fuel
- VERSATILE โ Compatible with all small engines, adding STA-BIL Fast Fix to your 2-cycle or 4-cycle small engine cleans carburetors and injectors while acting as a water remover. Use this product in your lawn mower, chainsaw, trimmer, snow blower, generator, and more
- DIRECTIONS โ For rough running engines use 1 oz. of STA-BIL Fast Fix per 2.5 gallons of fuel. Fill with fresh gas. Start the engine and allow to run for 15 minutes to allow the additive to work its way through the fuel system. If the engine does not start, attempt to turn it over a few times so the additive makes its way through the fuel system and allow to sit overnight. Attempt to start again, if problems persist you may need to have it looked at by a mechanic
- All STA-BIL branded products are good for use up to 2 years after the bottle was opened. Be sure to mark the date you opened the bottle on the back of your package!
Last update on 2025-04-15 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.