| “This site contains affiliate links for which OEMDTC may be compensated” |
February 20, 2019 NHTSA CAMPAIGN NUMBER: 19E013000
Pin Box Mounting Bolts Improperly Torqued
If the bolts loosen, the trailer could detach from the tow vehicle, increasing the risk of a crash.
NHTSA Campaign Number: 19E013
Manufacturer MORryde
International, Inc.
Components EQUIPMENT
Potential Number of Units Affected 189
Summary
MORryde International, Inc. (MORryde) is recalling certain MORryde Rubber Pin Boxes, part number RPB72-1621HD-5. The rubber pin box mounting bolts may have been improperly torqued.
Remedy
MORryde will notify owners and dealers will replace the mounting bolts, free of charge. The recall began February 18, 2019. Owners may contact MORryde customer service at 1-574-293-1581.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
To: Crossroads RV
From: MORryde International, Inc.
Date:2/15/2019
Re: Recall notice for Rubber Pin Box
This letter is to make you aware of a recall we are issuing for the Rubber Pin Box, model number RPB72-1621HD05, sold between dates 8/16/2018– 2/4/2019. We were made aware that there is a gap between the mounting plate and Rubber Pin Box due to the nuts and bolts not being properly torqued. The issue was corrected effective February 4, 2019 and all Rubber Pin Boxes installed after this date have been properly torqued.
Due to the potential safety risk, MORryde is issuing a safety recall. Though we’re not aware of any safety related issues currently,we’re just erring on the side of safety for the end consumers.
For additional information on this recall, please contact MORryde Warranty.
Phone:574-293-1581
Email: morrydewarranty@morryde.com
To: Columbus (Forest River)
From: MORryde International, Inc.
Date: 2/15/2019
Re: Recall notice for Rubber Pin Box
This letter is to make you aware of a recall we are issuing for the Rubber Pin Box, model number RPB72-1621HD- 05, sold between dates 8/16/2018 – 2/4/2019. We were made aware that there is a gap between the mounting plate and Rubber Pin Box due to the nuts and bolts not being properly torqued. The issue was corrected effective February 4, 2019 and all Rubber Pin Boxes installed after this date have been properly torqued.
Due to the potential safety risk, MORryde is issuing a safety recall. Though we’re not aware of any safety related issues currently, we’re just erring on the side of safety for the end consumers.
For additional information on this recall, please contact MORryde Warranty.
Phone: 574-293-1581
Email: morrydewarranty@morryde.com
1 Affected Product
3 Associated Documents
Defect Notice 573 Report
RCLRPT-19E013-7374.PDF 212.311KB
Loading...
Reload document 
Open in new tab
Manufacturer Notices(to Dealers,etc)
RCMN-19E013-5212.pdf 187.609KB
Loading...
Manufacturer Notices(to Dealers,etc)
RCMN-19E013-2849.pdf 187.969KB
Loading...
Latest Recalls Documents
- Patented rubber shear spring
- Back and forth movement up to 3"
- Side to side movement up to 1.5"
- Reduced back-and-forth chucking
- Fatigue tested to CSA standards
- Patented rubber shear spring
- Back and forth movement up to 3"
- Side to side movement up to 1.5"
- Reduced back-and-forth chucking
- Fatigue tested to CSA standards
- Patented rubber shear spring
- Back and forth movement up to 3"
- Side to side movement up to 1.5"
- Reduced back-and-forth chucking
- Fatigue tested to CSA standards
- Patented rubber shear spring
- Back and forth movement up to 3"
- Side to side movement up to 1.5"
- Reduced back-and-forth chucking
- Fatigue tested to CSA standards
- Patented rubber shear spring
- Back and forth movement up to 3"
- Side to side movement up to 1.5"
- Reduced back-and-forth chucking
- Fatigue tested to CSA standards
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.