55-0993 – Vehicle May Rollaway – 2018 Dynamax Isata

โ€œThis site contains affiliate links for which OEMDTC may be compensatedโ€

April 11, 2019 NHTSA CAMPAIGN NUMBER: 19V295000

Vehicle May Rollaway

Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.

 

NHTSA Campaign Number: 19V295

Manufacturer Forest RivereBay, Inc.

Components POWER TRAIN

Potential Number of Units Affected 16

 

Summary

Forest RivereBay, Inc. (Forest RivereBay) is recalling certain 2018 Dynamax Isata vehicles built on a RAMeBay chassis and equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.

 

Remedy

Forest RivereBay will notify owners, and ChryslereBay dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began May 6, 2019. Owners may contact ChryslereBay customer service at 1-800-853-1403 or Forest RivereBay at 1-574-262-3474. Forest RivereBay’s number for this recall is 55-0993.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


IMPORTANT SAFETY RECALL

 

 

NHTSA RECALL:19V295

 

<<VIN>>
<<OWNER NAME/DEALERNAME>>
<<ADDRESS>>
<<CITY>>, <<ST>>  <<ZIP-XXX>>

<<DATE>>

 

This Notice applies to your vehicle VIN listed above. Dear Forest RivereBay Customer:

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act (US) and the Motor Vehicle Safety Act (Canada). Forest RivereBay โ€“ Office of Corporate Compliance (โ€œOCCโ€) has decided that a defect, which relates to the motor vehicle safety, exists in certain 2018 model year Dynamax Isata – ISC35DBD, ISC36DSD and ISC36DSD4X4 Class C motorhome recreational vehicles.

 

WHAT IS THE DEFECT/NONCOMPLIANCE? 

Per FCAeBay recall notice 17V821: Depression of the brake pedal when the vehicle is in PARK and running energizes the Brake Transmission Shift Interlock (โ€œBTSIโ€). When the BTSI is energized for prolonged periods, the temperature rises, causing the BTSI housing plastic to swell and the grease to degrade, which causes the BTSI locking pin to stick in the open position. With the BTSI locking pin in the open position, the transmission can be shifted out of PARK and to or from any gear position without depression of the brake pedal and/or without the key in the ignition, if key applicable.

 

EVALUATION OF THE RISK TO THE VEHICLE AND OPERATOR(S) RELATED TO THE RECALL.

Per FCAeBay recall notice 17V821: The defect can result in the ability to shift the transmission out of the PARK position without a key in the ignition or a brake pedal application, which increases the potential for an unintended vehicle rollaway that may result in a vehicle crash or injury without prior warning.

 

WHAT IS FCAeBay GOING TO DO?

Any FCAeBay authorized service facility will be able to conduct the remedy for you, free of charge.

 

WHAT SHOULD YOU DO?

Please contact your nearest FCAeBay authorized service facility, without delay and request a service appointment to schedule the free interim-remedy.  The vehicle Owner is responsible for making arraignments to have the work completed.  Please state you have been notified by FCAeBay and Forest RivereBay of having a recall of your vehicle and provide the recall number for the dealership.  It is also helpful to the dealership to have a copy of these letters when you take your vehicle in for the recall remedy.

 

HOW LONG WILL THE REMEDY PROCESS TAKE?

The estimated time of repair is 2.00 hours.  However, the dealership may need to keep your vehicle or schedule an appointment with you for a later date to fit into their regular service schedule.

 

WHAT IF YOU HAVE PREVIOUSLY PAID FOR REPAIRS TO YOUR VEHICLE FOR THIS PARTICULAR CONDITION?

Please see the FCAeBay document regarding the procedure for reimbursement.

 

WHAT IF YOU NO LONGER OWN THIS VEHICLE?

If you no longer own this vehicle and have the address for the current owner, please forward this letter to the new owner. You have received this letter because government regulations require that a notification is sent to the last known owner of record. Our records indicate that you are the current owner.

PLEASE NOTE: FEDERAL LAW REQUIRES THAT ANY VEHICLE LESSOR RECEIVING THIS RECALL NOTICE MUST FORWARD A COPY OF THIS NOTICE TO THE LESSEE WITHIN TEN DAYS.

 

MAY FCAeBay OR FOREST RIVEReBay ASSIST YOU FURTHER?

If you have difficulties getting your vehicle repaired, please contact your Forest RivereBay Representative listed below:

CONTACTPHONE
FCAeBay Recall Assistance(800) 853-1403
Forest RivereBay Customer Service(574) 262-3474

 

If you are still having difficulty getting your vehicle/towable repaired in a reasonable amount of time or without change, you may write to the following address:

Administrator
National Highway Traffic Safety Administration
1200 New Jersey Ave, S.E.
Washington, D.C. 20590

Or you may call the toll free Vehicle Safety Hotline
at 1-888-327-4236 or (TTY: 1-800-424-9153).

Or visit www.safercar.gov and search;
Recall ID: 19V295


IMPORTANT SAFETY RECALL

NHTSA RECALL:19V295

 

<<DEALERNAME>>
<<ADDRESS>>
<<CITY>>, <<ST>>  <<ZIP-XXX>>

<<DATE>>

 

Pursuant to USC49CFR ยง577.13 โ€“ Notification to Dealerships and Distributors โ€“ Paragraph B

โ€œIt is a violation of Federal Law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by the notification under a sale or lease until the defect or noncompliance is remedied. Substantial civil penalties apply to violations of this law.โ€

โ€“Forest RivereBay motorized and towable products are contained in this section-

 

CANADA: Pursuant to the Canadian Motor Vehicle Safety Act, section 5

Companies who sell new non-complying vehicles may be in violation of the Motor Vehicle Safety Act. Substantial penalties apply to violations of this law. 

Forest RivereBay โ€“ Office of Corporate Compliance (โ€œOCCโ€) has decided that a safety defect exists in certain 2018 model year Dynamax Isata – ISC35DBD, ISC36DSD and ISC36DSD4X4 Class C motorhome recreational vehicles. Forest RivereBay is recalling the defect model(s) to ensure the safety of our future retail consumers and your dealership. Forest RivereBay apologizes for any inconvenience this action may cause your dealership; however, safety continued satisfaction and our commitment to building great products are of the utmost importance to Forest RivereBay.

The identified VIN referenced in the attached document(s).

The designated Date range of production is June 2017 through August 2017.

 

DEFECT/NONCOMPLIANCE:

Per FCAeBay recall notice 17V821 & 18V100: Depression of the brake pedal when the vehicle is in PARK and running energizes the Brake Transmission Shift Interlock (โ€œBTSIโ€). When the BTSI is energized for prolonged periods, the temperature rises, causing the BTSI housing plastic to swell and the grease to degrade, which causes the BTSI locking pin to stick in the open position. With the BTSI locking pin in the open position, the transmission can be shifted out of PARK and to or from any gear position without depression of the brake pedal and/or without the key in the ignition, if key applicable.

 

EVALUATION OF RISK:

Per FCAeBay recall notice 17V821 & 18V100: The defect can result in the ability to shift the transmission out of the PARK position without a key in the ignition or a brake pedal application, which increases the potential for an unintended vehicle rollaway that may result in a vehicle crash or injury without prior warning.

 

ACTION:

Schedule an appointment for the recall to be completed at the nearest authorized ChryslereBay, DodgeeBay, JeepeBay or RAMeBay dealership(s).

CONTACTPHONE
FCAeBay Recall Assistance(800) 853-1403
Forest RivereBay Customer Service(574) 262-3474

 

HELPFUL CONTACT INFORMATION:

The Recall shall be considered the utmost priority to remedy the 2018 model year Dynamax Isata – ISC35DBD, ISC36DSD and ISC36DSD4X4 Class C motorhome recreational vehicles in question. The retail consumer shall not be charged any amount of monies for remedy to their 2018 model year Dynamax Isata – ISC35DBD, ISC36DSD and ISC36DSD4X4 Class C motorhome recreational vehicles listed under this Recall.

If your dealership has already performed the remedy to 2018 model year Dynamax Isata – ISC35DBD, ISC36DSD and ISC36DSD4X4 Class C motorhome recreational vehicles, your dealership is entitled to the reimbursement as stated above by filing a claim using the indicated repair code(s).  If the remedy needs to be performed on an out of warranty 2018 model year Dynamax Isata – ISC35DBD, ISC36DSD and ISC36DSD4X4 Class C motorhome recreational vehicles in which the VIN falls under as stated in the identified VIN listing, your dealership is entitled to the reimbursement as stated above by filing a claim using the indicated repair code(s).

Notice:

In no manner shall a Forest RivereBay Product Owner or Coachmen Product Owner be charged any fee(s) for scheduling, conduction or completion of the recall.  Additionally, all dealership(s) that are Forest RivereBay and/or Coachmen dealership(s) are Federally Mandated to perform the recall once presented with this recall whether by the Owner or Dealership receipt of this letter, without denial of service to the Owner.  Lastly, denial of a remedy for this recall is a Federal Violation punishable by law resulting substantial fines and/or civil penalties.

 

Federal Regulation requires that any lessor receiving this Recall must forward a copy of this notice to the lessee within ten days.  If your dealership no longer owns this vehicle, please inform the Warranty Manager of the product listed above of the change of ownership.                                           

 


1 Affected Product

Vehicle

DYNAMAXISATA2018

 


8 Associated Documents

Recall 573 Report – Amendment 1

RCLRPT-19V295-8875.PDF 213.869KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [208.86 KB]

 


Recall Acknowledgement

RCAK-19V295-7179.pdf 245.943KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [240.18 KB]

 


Defect Notice 573 Report

RCLRPT-19V295-2416.PDF 213.895KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [208.88 KB]

 


Manufacturer Notices(to Dealers,etc)-19V295 – Dealer Letter

RCMN-19V295-4109.pdf 192.073KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [187.57 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-19V295-1902.pdf 196.745KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [192.13 KB]

 


Recall Quarterly Report #1, 2019-2

RCLQRT-19V295-7055.PDF 211.12KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.17 KB]

 


Recall Quarterly Report #3, 2019-4

RCLQRT-19V295-2397.PDF 211.305KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.35 KB]

 


Recall Quarterly Report #2, 2019-3

RCLQRT-19V295-0743.PDF 211.217KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.27 KB]

 


Latest Recalls Documents

 


 

ChryslereBay Reprogramming

Chrysler J2534 Application Overview

 

DRB III Emulator

Flash Availability - J2534/Pass Thru Device

Vehicle to Diagnostic Tool Reference Chart

 

ChryslereBay Recommended J2534 Devices

For ChryslereBay recommended J2534 device, see below table.

J2534 Device Firmware Version
CTC Vehicle Box * 1.9
UCAN 2 1.0
Blue Streak -2534 Global Programmer 2.10
Actia I+ME Passthru 2.07

* ChryslereBay recommends the CTC Vehicle Box Device for ChryslereBay SCI ECU reprogramming. SCI reprogramming is used on most PCMs and TCMs prior to the introduction of CAN bus vehicles which began in 2004 (Durango).

 

Compatible J2534 Devices

CarDAQ-Plus 2 Diagnostic Code Reader and J2534 Programming Tool
55-0993 - Vehicle May Rollaway - 2018 Dynamax Isata | small light Drew Technologies (DRWCDPLUSKIT) CarDAQ-Plus J2534 Flash Reprogramming Kit
55-0993 - Vehicle May Rollaway - 2018 Dynamax Isata | small light CarDAQ-M Modular PassThru J2534 Vehicle Reflash Hardware
55-0993 - Vehicle May Rollaway - 2018 Dynamax Isata | small light VSI J2534 ECU Reprogrammer & Diagnostic Adapter
Autel MaxiFlash Elite J2534 ECU Programming Tool
Dearborn d-Bridge Adapter J2534 OBDII Engineering Tool
Drew Tech Mongoose Chrysler Pro Oem Diagnostics And Programing Cable Chrysler

 


Click on the link below to:

Download J2534 Application

(Install the wiTECH 2.0 J2534 Application on your computer)

Download the Setup Utility

(Configure your microPod/MDP device)

Launch wiTECH 2.0

(Once subscription and users are assigned to a tool please follow this link to access wiTECH)

https://www.mopartsp.com/support

 


Chrysler J2534 Manual

wiTECH Software

www.techauthority.com

 


 

Bestseller No. 1
TOPDON RLink J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Enhanced J2534 VCI, Supports J2534/D-PDU/CAN-FD/DoIP, Compatible with 17+ Vehicle Brands, No OE Software Provided
  • J2534 Pass-Thru Programmer: TOPDON RLink J2534 is an advanced diagnostic and reprogramming tool that support all J2534 protocols, as well as D-PDU, CAN-FD and DoIP, ensuring compatibility with a wide range of modern vehicles. It offers extensive versatility with support for over 17 major automotive brands, including ChryslereBay, FordeBay, GM, NissaneBay, ToyotaeBay, HondaeBay, SubarueBay, Land RovereBay/JaguareBay, VolvoeBay, Wuling, VolkswageneBay, Mercedes-BenzeBay, and BMWeBay, and so on, enjoy dealership-level functions at your fingertips
  • All-in-One OEM Diagnostics: This J2534 ECU programming tool elevates your automotive repair capabilities to new heights by delivering complete OEM diagnosis. Boasting comprehensive full-system diagnostics, intuitive repair guides, advanced ECU programming and coding, common reset services, a vast library of repair information and more, this all-in-one solution empowers technicians to effortlessly tackle complex vehicle issues with ease
  • Proven Performance You Can Trust: Backed by over 10000 real vehicle tests and benefit from a wealth of practical experience, this OEM reprogramming tool guarantees stable and exceptional performance. Supported by TOPDON's dedicated technical experts with in-depth knowledge of both auto repair and J2534 Pass-Thru programming, the RLink J2534 provides prompt and professional assistance, ensuring a smooth setup and reliable compatibility
  • Integrated Excellence, Always Up-to-Date: Featuring the exclusive RLink Platform to provide a streamlined experience with one-click driver installation and management, ensuring flawless integration with your OE software, maintaining the original performance quality. The built-in operation guide makes mastering OE software quick and easy, so you can get started right away. Plus, with lifetime free updates, your diagnostics will stay current with the latest drivers and innovations
  • Efficiency Meets Versatility: Engineered to support three CAN channels simultaneously - CAN FD and CAN-CC included, giving you the edge in fast troubleshooting. To perfectly synchronized with the OE software, please diagnose with active subscriptions and make sure your computer system is running a compatible 64-bit Windows version (7, 8, 10 or later) to fully leverage the power of RLink J2534. *We don't provide extra OE software
Bestseller No. 2
LAUNCH X431 PRO3S+ Elite, 2025 All-in-One Bidirectional Scan Tool with J2534,HD Trucks Scan, Topology Map, 60+Service,Online Coding Full Function Scanner, CANFD/DoIP/D-PDU/CAN 2.0, FCA, 2 Yrs Update
  • ใ€J2534 PROTOCOL WITH SMARTLINKCใ€‘ LAUNCH X431 PRO3S+ ELITE scan tool with newly upgraded smartlinkC V2.0. The SmartLinkC is a communication interface supporting J2534 specifications. Of course, it also can be used as a J2534 PassThru device, working together with the PC installed with the OEM diagnostic software to perform the J2534 protocol.J2534 protocol is the only solution for problems ranging from driveability and loss of power to poor fuel economy.
  • ใ€INTELLIGENT TOPOLOGY MAP TO FASTER FULL SYSTEMS DIAGNOSISใ€‘ X431 PRO3S+ELITE bidirectional scan tool with new-added intuitive topology mapping. Harnesses intuitive topology mapping for comprehensive visualization of the vehicle all system. It shows all available control units in different colors, the numbers of system, the scanned system, and the scan results, bringing maximum convenience & superfast speed for you to do swift diagnosis & high-level repairs.
  • ใ€TOP HARDWARE CONFIGURATION, UPGRADED OF LAUNCH X431 PRO3S+ใ€‘ LAUNCH X431 PRO3S+ELITE diagnostic scanner possess with Android 10.0 OS; CPU 4-Core Processor, 2.0 GHz. Greatly increased the speed of running multiple task. 2.4GHz/5GHz; 6300mAh/7.6V stronger battery capacity; 10.1 Inch Touchscreen with 8MP camera; AUTO VIN; 4GB+64GB storage memory; 20X faster transmission rate, save more vehicle documents and customer data; Supports 25+ Software Languages, such as EN, DE, FR, SP nd JP and so on.
  • ใ€3000+ ACTIVE TEST/BI-DIRECTIONAL CONTROL LAUNCH SCANNERใ€‘ LAUNCH X431 PRO3S+ELITE HD automotive scanner is a cost-effective bidirectional scanner that deserves owned by every repairing DIYers and mechanics. You can easily send command signal at fingertips from the scanner to various module actuators to test component integrity and functionality in minutes or even seconds to tell if replacement or repair is needed.
  • ใ€COMPLETE 60+ HOT RESETS, CALIBRATION, INITIALIZATION, RELEARNใ€‘ LAUNCH X431 PRO3S+ELITE SmartLinkC escaner automotriz professional enjoys 60+ special service, such as Oil Reset, ABSeBay brake bleed, EPB, SAS, BMS, Suspension, Injector reset, Power Balance, Turbo Calibration, VGT, Transmission Adaption, Throttle Adaptation, matching and etc. rigorous on-site testing has been performed to ensure 100% availability.
Bestseller No. 3
Opus IVS CarDAQ-Plus 3 All Makes J2534 Reprogramming Tool
  • ALL OF THE J2534 PROTOCOLS - This single unit has all of the protocols you need for your OEM J2534 reprogramming and diagnostics including the latest in DoIP and CanFD
  • J2534 TECHNICAL SUPPORT - FREE for the life of the tool. Staffed by technicians who understand vehicle repair and J2534 Passโ€‘thru
  • TOOLBOX WITH OEM APPLICATION DESCRIPTIONS - educational video tutorials and real-time news โ€“ Giving you the confidence and up-to-date knowledge to get the job done
  • J2534 v05.00 API - The newest version of J2534 to give you the latest in pass-thru technology
  • FUTURE PROOF WITH 4 CAN CHANNELS - Going beyond the 3 required by select ChryslereBay/FCAeBay models, CarDAQ-Plus 3 also provides a 4th to meet the needs of future OEM applications
Bestseller No. 4
Opus IVS Mongoose-Plus J2534 OEM Vehicle Interface Cable - GM OEM Reprogramming and Diagnostics
  • Industry-leading J2534 Pass-Thru Technology: Enabling diagnostics, reprogramming and security functions for dealerships and the independent repair facility. Economical and compact pass-thru devices provides an easy-to-use interface that allows you to repair complex vehicles with OE applications in your shop. Each type (see single branded types above) Mongoose-Plus is engineered to work with one of the following OEM's J2534 applications for ChryslereBay, FordeBay, GM, NissaneBay, ToyotaeBay, SubarueBay, & VW/AudieBay.
  • Supports Current GM Vehicles: Now includes CAN-FD, DoIP (Diagnostics over Internet Protocol - as defined in J2534-2) and support for J2534 version 5.0. This is the tool that GM dealerships use for diagnostics and reprogramming.
  • NEW Bluetooth Wireless Options Available: Providing wireless connectivity between your laptop and the Mongoose-Plus
  • Expert Product Support: Staffed by technicians who understand vehicle repair and J2534 Passโ€‘Thru applications to help you with any technical setup questions
  • Key Registration and Immobilizer Support: Using NASTF Vehicle Security Professional credentials
Bestseller No. 5
OBDLink EX FORScan OBD Adapter
  • CUSTOM-DESIGNED FOR USE WITH FORSCAN: Works with all FORScan compatible vehicles and is recommended by the FORScan Team
  • DEALERSHIP-LEVEL DIAGNOSTICS: OBDLink EX supports all FordeBay protocols, modules, and advanced features of FORScan
  • ELECTRONIC SWITCH allows FORScan to access all CAN buses simultaneously and enables advanced functions not possible with โ€œtoggle switchโ€ adapters
  • MAXIMUM THROUGHPUT -- up to 20 times faster than โ€œtoggle switchโ€ adapters
  • ROCK-SOLID CONNECTION avoids data corruption and dropped packets
Bestseller No. 6
Autel MaxiFlash Elite VCI J2534 Pass-Thru ECU Programming Tool, 2025 Multi-Protocol PassThru Interface, Work with Autel MaxiSYS Elite II Elite MS908 MS908S Pro II MS908CV II MK908P MK908 Pro II & P-C
  • ๐ŸŒใ€Works with Autel Elite II Elite MS908 MS908S Pro II MS908CV II MK908P MK908 Pro IIใ€‘Autel J2534 work with these tools to program ECUs on specific BM.W/ BE.NZ for specific functions. โ˜…โ˜…NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your scanner MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. If need any supports, contact us via: ๐Ÿš˜auteldirect @ outlook. com๐Ÿš˜.
  • ๐ŸŒใ€SAE J2534-1 & J2534-2 Standardsใ€‘Autel MaxiFlash Elite J2534 is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device, which performs standard PassThru J2534 functionality: Compatible with for ToyotaeBay Techstream, VolvoeBay VIDA, HondaeBay HDS, JaguareBay-Land RovereBay IDS and BM.W 3G for OEM diagnostics. Autel MaxiFlash J2534 is also specially designed to provide users with P-C communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, reliability and flexibility.
  • ๐ŸŒใ€High-speed Transmission Speedใ€‘Autel MaxiFlash Elite Reprogramming Device J2534 supports simultaneous communication definition in J2534-1, running 3 protocols at the same time, which greatly improves reprogramming and diagnostic speed. Embedded with the ARM9 Dual-core processor (clocked up to 500MHz), which further boosts the communicating speed to save more times and win more business.
  • ๐ŸŒใ€Multiple Devices Connected with P-Cใ€‘Autel MaxiFlash Elite J2534 also supports multiple device connections to the P-C, which can operate diagnostic and reprogramming functions on more than one vehicle at the same time. Autel MaxiFlash Elite J2534 built-in wireless and data storage, which can update via Internet. It also ensures quickly reprogramming even the newest controllers.
  • ๐ŸŒใ€Extensive Compatibilityใ€‘Autel MaxiFlash J2534 is compatible with ToyotaeBay Techstream, VolvoeBay VIDA, HondaeBay HDS, JaguareBay-Land RovereBay IDS and BM.W 3G for OEM diagnostics. To check compatibility, please contact ๐Ÿš˜auteldirect @ outlook . com๐Ÿš˜ directly for satisfaction-guaranteed support!

Last update on 2025-04-20 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...