| โThis site contains affiliate links for which OEMDTC may be compensatedโ |
October 16, 2019 NHTSA CAMPAIGN NUMBER: 19V736000
Delay In Seatbelt-Unfastened Telltale/FMVSS 208
Without the seatbelt warning reminder, the driver may forget to fasten the seatbelt, increasing the risk of injury in the event of a crash.
NHTSA Campaign Number: 19V736
Manufacturer Forest River
, Inc.
Components SEAT BELTS, ELECTRICAL SYSTEM
Potential Number of Units Affected 6
Summary
Forest River, Inc. (Forest River) is recalling certain 2020 Sunseeker SSC2250SLEC, Freelander FLC26RSC, and Leprechaun LPC240FSC vehicles. The seatbelt-unfastened warning light will not illuminate for approximately five seconds after the ignition is moved to the “on” or “start” position. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, “Occupant Crash Protection.”
Remedy
Forest River will notify owners, and GM dealers will reprogram the instrument panel, free of charge. The recall began on October 29, 2019. Owners may contact GMC customer service at 1-800-462-8782 or Forest River customer service at 1-800-348-7440. Forest River’s number for this recall is 51-1084.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
IMPORTANT SAFETY RECALL
September 2019
This notice applies to your vehicle, VIN:
Dear Forest River Inc:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
General Motors has decided that certain 2019 model year Chevrolet Express and GMC Savana vehicles may fail to conform to S7.3 of Federal Motor Vehicle Safety Standard (FMVSS) 208, Occupant crash protection. As a result, GM is conducting a recall. We apologize for this inconvenience. However, we are concerned about your safety and continued satisfaction with our products.
|
I M P O R T A N T
|
| Why is your vehicle being recalled? | In these vehicles, the seatbelt-unfastened telltale will not illuminate for approximately five seconds after the ignition is moved to the on or start position. There is no impact to the vehicleโs seatbelt systems, and the telltale will function normally after the five second delay. A software change implemented for 2019 model year Chevrolet Express and GMC Savana vehicles contains an error that inhibits the activation of the telltale for five seconds after vehicle startup. During the five-second delay, the telltale will not alert the driver that the driverโs seatbelt is unbuckled, increasing the risk of the driver forgetting to buckle the seatbelt and the risk of injury in a crash. |
| What will we do? | Your Chevrolet dealer will reprogram the instrument panel cluster (IPC). This service will be performed for you at no charge. Because of service scheduling requirements, it is likely that your dealer will need your vehicle longer than the actual inspection and service correction time of approximately 35 minutes. |
| What should you do? | You should contact your Chevrolet dealer to arrange a service appointment as soon as possible. |
| Do you have questions? | If you have questions or concerns that your dealer is unable to resolve, please contact the Chevrolet Customer Assistance Center at 1.800.630.2438 (TTY 1.800.833.2438). |
If after contacting your dealer and the Customer Assistance Center, you are still not satisfied we have done our best to remedy this condition without charge and within a reasonable time, you may wish to write the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590, or call the toll-free Vehicle Safety Hotline at 1.888.327.4236 (TTY 1.800.424.9153), or go to https://www.safercar.gov. The National Highway Traffic Safety Administration Campaign ID Number for this recall is 19V644.
Federal regulation requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
Maryann L. Combs
Vice President
Global Vehicle Safety
GM Recall: N192264500
3 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| FOREST RIVER | FREELANDER | 2020 |
| FOREST RIVER | LEPRECHAUN | 2020 |
| FOREST RIVER | SUNSEEKER | 2020 |
7 Associated Documents
Recall 573 Report – AMENDMENT 2
RCLRPT-19V736-9462.PDF 214.374KB
Loading...
Reload document 
Open in new tab
Recall 573 Report – AMENDMENT 3
RCLRPT-19V736-7316.PDF 216.381KB
Loading...
Recall 573 Report – AMENDMENT 1
RCLRPT-19V736-1276.PDF 214.305KB
Loading...
Recall Quarterly Report #1, 2019-4
RCLQRT-19V736-2331.PDF 211.14KB
Loading...
Miscellaneous Document-GM 19V644 Notice
RMISC-19V736-8582.pdf 229.183KB
Loading...
Recall Acknowledgement
RCAK-19V736-4628.pdf 244.958KB
Loading...
Defect Notice 573 Report
RCLRPT-19V736-9019.PDF 213.893KB
Loading...
Latest Recalls Documents
GM Reprogramming
GM Diagnostic/Programming (TIS2Web)
Approved J2534 Device with TIS2WEB can reprogram 1996 and later All GM Modules.
To obtain the latest electronic controller calibration information for your vehicle, go to https://tis2web.service.gm.com/tis2web and enter the vehicle's 17 character Vehicle Identification Number (VIN) and select 'Get CAL IDโ.
You can then compare the latest part number with the actual number installed on the vehicle to determine if a reprogram is needed.
The Service Programming System (SPS) application is part of the TIS2Web system. To program an ECU, the SPS application must communicate with the vehicle control modules using the proper J2534 programming interface tool.
The following are the supported interface tools:
The Tech 2 supports model years 1996 and beyond. With the addition of the CAN Diagnostic Interface (CANdi) module, Tech 2 is fully backward compatible with current Tech 2 functionality and operates transparently when diagnosing non-CAN-equipped vehicles.
Servicing the next generation Global A vehicles will require the diagnostic software, GDS2, Global Diagnostic System 2 running on a local PC device while the MDI is connected to the vehicle. The GM MDI is the Global Diagnostic tool for future vehicles starting with Global A vehicles.
The GM MDI was introduced in the fall of 2007 for Pass-Thru programming and offers faster programming speed. It can be used to perform Pass-Thru programming on all vehicles built since 1996 and into the future. Click here to view a list of GDS supported vehicles.
- J2534 Pass-Thru Programmer: TOPDON RLink J2534 is an advanced diagnostic and reprogramming tool that support all J2534 protocols, as well as D-PDU, CAN-FD and DoIP, ensuring compatibility with a wide range of modern vehicles. It offers extensive versatility with support for over 17 major automotive brands, including Chrysler, Ford, GM, Nissan, Toyota, Honda, Subaru, Land Rover/Jaguar, Volvo, Wuling, Volkswagen, Mercedes-Benz, and BMW, and so on, enjoy dealership-level functions at your fingertips
- All-in-One OEM Diagnostics: This J2534 ECU programming tool elevates your automotive repair capabilities to new heights by delivering complete OEM diagnosis. Boasting comprehensive full-system diagnostics, intuitive repair guides, advanced ECU programming and coding, common reset services, a vast library of repair information and more, this all-in-one solution empowers technicians to effortlessly tackle complex vehicle issues with ease
- Proven Performance You Can Trust: Backed by over 10000 real vehicle tests and benefit from a wealth of practical experience, this OEM reprogramming tool guarantees stable and exceptional performance. Supported by TOPDON's dedicated technical experts with in-depth knowledge of both auto repair and J2534 Pass-Thru programming, the RLink J2534 provides prompt and professional assistance, ensuring a smooth setup and reliable compatibility
- Integrated Excellence, Always Up-to-Date: Featuring the exclusive RLink Platform to provide a streamlined experience with one-click driver installation and management, ensuring flawless integration with your OE software, maintaining the original performance quality. The built-in operation guide makes mastering OE software quick and easy, so you can get started right away. Plus, with lifetime free updates, your diagnostics will stay current with the latest drivers and innovations
- Efficiency Meets Versatility: Engineered to support three CAN channels simultaneously - CAN FD and CAN-CC included, giving you the edge in fast troubleshooting. To perfectly synchronized with the OE software, please diagnose with active subscriptions and make sure your computer system is running a compatible 64-bit Windows version (7, 8, 10 or later) to fully leverage the power of RLink J2534. *We don't provide extra OE software
- ใJ2534 PROTOCOL WITH SMARTLINKCใ LAUNCH X431 PRO3S+ ELITE scan tool with newly upgraded smartlinkC V2.0. The SmartLinkC is a communication interface supporting J2534 specifications. Of course, it also can be used as a J2534 PassThru device, working together with the PC installed with the OEM diagnostic software to perform the J2534 protocol.J2534 protocol is the only solution for problems ranging from driveability and loss of power to poor fuel economy.
- ใINTELLIGENT TOPOLOGY MAP TO FASTER FULL SYSTEMS DIAGNOSISใ X431 PRO3S+ELITE bidirectional scan tool with new-added intuitive topology mapping. Harnesses intuitive topology mapping for comprehensive visualization of the vehicle all system. It shows all available control units in different colors, the numbers of system, the scanned system, and the scan results, bringing maximum convenience & superfast speed for you to do swift diagnosis & high-level repairs.
- ใTOP HARDWARE CONFIGURATION, UPGRADED OF LAUNCH X431 PRO3S+ใ LAUNCH X431 PRO3S+ELITE diagnostic scanner possess with Android 10.0 OS; CPU 4-Core Processor, 2.0 GHz. Greatly increased the speed of running multiple task. 2.4GHz/5GHz; 6300mAh/7.6V stronger battery capacity; 10.1 Inch Touchscreen with 8MP camera; AUTO VIN; 4GB+64GB storage memory; 20X faster transmission rate, save more vehicle documents and customer data; Supports 25+ Software Languages, such as EN, DE, FR, SP nd JP and so on.
- ใ3000+ ACTIVE TEST/BI-DIRECTIONAL CONTROL LAUNCH SCANNERใ LAUNCH X431 PRO3S+ELITE HD automotive scanner is a cost-effective bidirectional scanner that deserves owned by every repairing DIYers and mechanics. You can easily send command signal at fingertips from the scanner to various module actuators to test component integrity and functionality in minutes or even seconds to tell if replacement or repair is needed.
- ใCOMPLETE 60+ HOT RESETS, CALIBRATION, INITIALIZATION, RELEARNใ LAUNCH X431 PRO3S+ELITE SmartLinkC escaner automotriz professional enjoys 60+ special service, such as Oil Reset, ABS brake bleed, EPB, SAS, BMS, Suspension, Injector reset, Power Balance, Turbo Calibration, VGT, Transmission Adaption, Throttle Adaptation, matching and etc. rigorous on-site testing has been performed to ensure 100% availability.
- ALL OF THE J2534 PROTOCOLS - This single unit has all of the protocols you need for your OEM J2534 reprogramming and diagnostics including the latest in DoIP and CanFD
- J2534 TECHNICAL SUPPORT - FREE for the life of the tool. Staffed by technicians who understand vehicle repair and J2534 Passโthru
- TOOLBOX WITH OEM APPLICATION DESCRIPTIONS - educational video tutorials and real-time news โ Giving you the confidence and up-to-date knowledge to get the job done
- J2534 v05.00 API - The newest version of J2534 to give you the latest in pass-thru technology
- FUTURE PROOF WITH 4 CAN CHANNELS - Going beyond the 3 required by select Chrysler/FCA models, CarDAQ-Plus 3 also provides a 4th to meet the needs of future OEM applications
- Industry-leading J2534 Pass-Thru Technology: Enabling diagnostics, reprogramming and security functions for dealerships and the independent repair facility. Economical and compact pass-thru devices provides an easy-to-use interface that allows you to repair complex vehicles with OE applications in your shop. Each type (see single branded types above) Mongoose-Plus is engineered to work with one of the following OEM's J2534 applications for Chrysler, Ford, GM, Nissan, Toyota, Subaru, & VW/Audi.
- Supports Current GM Vehicles: Now includes CAN-FD, DoIP (Diagnostics over Internet Protocol - as defined in J2534-2) and support for J2534 version 5.0. This is the tool that GM dealerships use for diagnostics and reprogramming.
- NEW Bluetooth Wireless Options Available: Providing wireless connectivity between your laptop and the Mongoose-Plus
- Expert Product Support: Staffed by technicians who understand vehicle repair and J2534 PassโThru applications to help you with any technical setup questions
- Key Registration and Immobilizer Support: Using NASTF Vehicle Security Professional credentials
- CUSTOM-DESIGNED FOR USE WITH FORSCAN: Works with all FORScan compatible vehicles and is recommended by the FORScan Team
- DEALERSHIP-LEVEL DIAGNOSTICS: OBDLink EX supports all Ford protocols, modules, and advanced features of FORScan
- ELECTRONIC SWITCH allows FORScan to access all CAN buses simultaneously and enables advanced functions not possible with โtoggle switchโ adapters
- MAXIMUM THROUGHPUT -- up to 20 times faster than โtoggle switchโ adapters
- ROCK-SOLID CONNECTION avoids data corruption and dropped packets
- ๐ใWorks with Autel Elite II Elite MS908 MS908S Pro II MS908CV II MK908P MK908 Pro IIใAutel J2534 work with these tools to program ECUs on specific BM.W/ BE.NZ for specific functions. โ โ NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your scanner MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. If need any supports, contact us via: ๐auteldirect @ outlook. com๐.
- ๐ใSAE J2534-1 & J2534-2 StandardsใAutel MaxiFlash Elite J2534 is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device, which performs standard PassThru J2534 functionality: Compatible with for Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BM.W 3G for OEM diagnostics. Autel MaxiFlash J2534 is also specially designed to provide users with P-C communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, reliability and flexibility.
- ๐ใHigh-speed Transmission SpeedใAutel MaxiFlash Elite Reprogramming Device J2534 supports simultaneous communication definition in J2534-1, running 3 protocols at the same time, which greatly improves reprogramming and diagnostic speed. Embedded with the ARM9 Dual-core processor (clocked up to 500MHz), which further boosts the communicating speed to save more times and win more business.
- ๐ใMultiple Devices Connected with P-CใAutel MaxiFlash Elite J2534 also supports multiple device connections to the P-C, which can operate diagnostic and reprogramming functions on more than one vehicle at the same time. Autel MaxiFlash Elite J2534 built-in wireless and data storage, which can update via Internet. It also ensures quickly reprogramming even the newest controllers.
- ๐ใExtensive CompatibilityใAutel MaxiFlash J2534 is compatible with Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BM.W 3G for OEM diagnostics. To check compatibility, please contact ๐auteldirect @ outlook . com๐ directly for satisfaction-guaranteed support!
Last update on 2025-04-15 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.