Stabilizer Bracket May Break – 2017 Dynamax DX3 & Force Motorhomes

โ€œThis site contains affiliate links for which OEMDTC may be compensatedโ€

October 18, 2019 NHTSA CAMPAIGN NUMBER: 19V747000

Stabilizer Bracket May Break

If the stabilizer bracket breaks, a sudden loss of vehicle control could occur, increasing the risk of a crash.

 

NHTSA Campaign Number: 19V747

Manufacturer Forest RivereBay, Inc.

Components SUSPENSION

Potential Number of Units Affected 14

 

Summary

Forest RivereBay, Inc. (Forest RivereBay) is recalling certain 2017 Dynamax DX3 and Force motorhomes. The front axle stabilizer bracket may not properly mount to the axle, and may break as a result.

 

Remedy

Forest RivereBay has notified owners, and a Detroit Diesel dealer will perform the recall remedy. The stabilizer brackets and I-beams will be inspected and spacers and replacement stabilizer brackets will be installed, as necessary, free of charge. The recall began November 6, 2019. Owners may contact Forest RivereBay customer service at 1-800-348-7440 or find a Detroit Diesel location at www.detroitdiesel.com/locations/default.aspx. Forest RivereBay’s number for this recall is 55-1105.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


IMPORTANT SAFETY RECALL

NHTSA RECALL: 19V747
FR Recall ID: 55-1105
DETROIT DIESEL RECALL ID: D19M4

 

<<VIN>>
<<OWNER NAME/DEALERNAME>>
<<ADDRESS>>
<<CITY>>, <<ST>>  <<ZIP-XXX>>

 

October 21, 2019

 

This Notice applies to your vehicle VIN listed above. Dear Forest RivereBay Customer:

 

This notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This notice is also sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Forest RivereBay โ€“ Office of Corporate Compliance (โ€œOCCโ€) has decided that a defect, which relates to the motor vehicle safety, exists in certain 2017 – Dynamax โ€“ DXC37BH, DXC37RB, DXC37TS, FRC37BHHD and FRC37TSHD Class C recreational vehicles.

 

WHAT IS THE DEFECT/NONCOMPLIANCE?

According to the Detroit Diesel defect notice: โ€œA different I-beam design was introduced on Model 3 Detroitโ„ข Axles thatdoes not have a flat mating surface on the bottom side of the I-beam where the optional stabilizer brackets are mountedand may result in damage to the stabilizer bracket due to bending stress during assembly of the U- bolts at the truck manufacturing plant.โ€

 

EVALUATION OF THE RISK TO THE VEHICLE AND OPERATOR(S) RELATED TO THE RECALL.

If the stabilizer bracket broke, there may be a loss of vehicle control, which may lead to a crash.

 

WHAT SHOULD YOU DO?

Please contact your nearest Detroit Diesel Authorized Repair Facility without delay, and request a service appointment to schedule the free inspection and if required, remedy. The vehicle Owner is responsible for making arraignments to have the work completed.  Please state you have been notified by Detroit Diesel and Forest RivereBay of having a recall of your vehicle and provide the recall number for the dealership.  It is also helpful to the dealership to have a copy of these letters when you take your vehicle in for the recall remedy.

 

HOW LONG WILL THE REMEDY PROCESS TAKE?

The estimated time of repair is 3.10 hours, according to Detroit Diesel.  However, the Detroit Diesel Authorized Repair Facility may need to keep your vehicle or schedule an appointment with you for a later date to fit into their regular service schedule.

 

WHAT IF YOU HAVE PREVIOUSLY PAID FOR REPAIRS TO YOUR VEHICLE FOR THIS PARTICULAR CONDITION?

Please refer to the terms of reimbursement by Detroit Diesel.

 

What if you no longer own this vehicle?

If you no longer own this vehicle and have the address for the current owner, please forward this letter to the new owner. You have received this letter because government regulations require that a notification is sent to the last known owner of record. Our records indicate that you are the current owner.

 

PLEASE NOTE: FEDERAL LAW REQUIRES THAT ANY VEHICLE LESSOR RECEIVING THIS RECALL NOTICE MUST FORWARD A COPY OF THIS NOTICE TO THE LESSEE WITHIN TEN DAYS.

 

MAY FORDeBay OR FOREST RIVEReBay ASSIST YOU FURTHER?

If you have difficulties getting your vehicle repaired, please contact your FordeBay or Forest RivereBay Representative listed below:

 

CONTACTPHONE
DETROIT DIESEL CUSTOMER SERVICE(313) 592-5000

 

If you are still having difficulty getting your vehicle/towable repaired in a reasonable amount of time or without change, you may write to the following address:

Administrator
National Highway Traffic Safety Administration
1200 New Jersey Ave, S.E.
Washington, D.C. 20590

Or you may call the toll free Vehicle Safety Hotline  at 1-888-327-4236 or (TTY: 1-800-424-9153).

 

Or visit www.safercar.gov and search;

FOREST RIVEReBay Recall ID: 19V747
DETROIT DIESEL RECALL ID: D19M4

 

Sincerely,

 

Forest RivereBay, Inc.
Engineer
Office of Corporate Compliance

 


IMPORTANT SAFETY RECALL

FOLLOW-UP NOTICE OF SAFETY DEFECT

 

Our records indicate your vehicle has not been remedied; for your Safety and the Safety of others, please have your vehiclesโ€™ recall remedied as soon as possible.

 

NHTSA RECALL: 19V747
CANADA RECALL: N/A
FR ID: 55-1105

<<VIN>>
<<OWNER NAME/DEALERNAME>>
<<ADDRESS>>
<<CITY>>, <<ST>> <<ZIP-XXX>>

 

<<DATE>>

 

This Notice applies to your vehicle VIN listed above.

 

Dear Forest RivereBay Customer:

This notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This notice is also sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Forest RivereBay โ€“ Office of Corporate Compliance (โ€œOCCโ€) has decided that a defect, which relates to the motor vehicle safety, exists in certain 2017 – Dynamax โ€“ DXC37BH, DXC37RB, DXC37TS, FRC37BHHD and FRC37TSHD Class C recreational vehicles. This is to inform you that your vehicle may contain a defect that could affect the safety of a person.

 

WHAT IS THE DEFECT/NONCOMPLIANCE? 

According to the Detroit Diesel defect notice: โ€œA different I-beam design was introduced on Model 3 Detroitโ„ข Axles that does not have a flat mating surface on the bottom side of the I-beam where the optional stabilizer brackets are mounted and may result in damage to the stabilizer bracket due to bending stress during assembly of the U- bolts at the truck manufacturing plant.โ€

 

 

EVALUATION OF THE RISK TO THE VEHICLE AND OPERATOR(S) RELATED TO THE RECALL.

If the stabilizer bracket broke, there may be a loss of vehicle control, which may lead to a crash.

 

WHAT SHOULD YOU DO?

Please contact your nearest Detroit Diesel Authorized Repair Facility without delay, and request a service appointment to schedule the free inspection and if required, remedy. The vehicle Owner is responsible for making arraignments to have the work completed.  Please state you have been notified by Detroit Diesel and Forest RivereBay of having a recall of your vehicle and provide the recall number for the dealership.  It is also helpful to the dealership to have a copy of these letters when you take your vehicle in for the recall remedy.

 

HOW LONG WILL THE REMEDY PROCESS TAKE?

The estimated time of repair is 3.10 hours, according to Detroit Diesel.  However, the Detroit Diesel Authorized Repair Facility may need to keep your vehicle or schedule an appointment with you for a later date to fit into their regular service schedule.

 

WHAT IF YOU HAVE PREVIOUSLY PAID FOR REPAIRS TO YOUR VEHICLE FOR THIS PARTICULAR CONDITION?

Please refer to the terms of reimbursement by Detroit Diesel.

 

What if you no longer own this vehicle?

If you no longer own this vehicle and have the address for the current owner, please forward this letter to the new owner. You have received this letter because government regulations require that a notification is sent to the last known owner of record. Our records indicate that you are the current owner.

 

PLEASE NOTE: FEDERAL LAW REQUIRES THAT ANY VEHICLE LESSOR RECEIVING THIS RECALL NOTICE MUST FORWARD A COPY OF THIS NOTICE TO THE LESSEE WITHIN TEN DAYS.

 

MAY FORDeBay OR FOREST RIVEReBay ASSIST YOU FURTHER?

If you have difficulties getting your vehicle repaired, please contact your FordeBay or Forest RivereBay Representative listed below:

CONTACTPHONE
DETROIT DIESEL CUSTOMER SERVICE(313) 592-5000

 

If you are still having difficulty getting your vehicle/towable repaired in a reasonable amount of time or without change, you may write to the following address:

Administrator
National Highway Traffic Safety Administration
1200 New Jersey Ave, S.E.
Washington, D.C. 20590

 

Or you may call the toll free Vehicle Safety Hotline  at 1-888-327-4236 or (TTY: 1-800-424-9153).

Or visit www.safercar.gov and search;

FOREST RIVEReBay Recall ID: 19V747
DETROIT DIESEL RECALL ID: D19M4

 


Subject:Emission Recall D19M4
Detroit Axle M2 Chassis Stabilizer Bracket lnsg_ection

 

 

Detroit Diesel Corporation (DOC) has determined that certain FreightlinereBayยฎ M2 vehicles with Detroitโ„ข Axles and front stabilizer bars will need to have the front axle stabilizer brackets inspected for damage.

Certain vehicles built between June 2014 and March 2018, a different I-beam design was introduced on Model 3 Detroitโ„ข Axles that does not have a flat mating surface on the bottom side of the I-beam where the optional stabilizer brackets are mounted and may result in damage to the stabilizer bracket due to bending stress during assembly of the Uยญ bolts at the truck manufacturing plant.

These specific vehicles will need to have the stabilizer brackets and I-beams inspected for damage and may require installation of spacers and replacement of the stabilizer brackets and mounting hardware.

Note that the inspection procedure will help to determine which vehicles have already been completed and prevent further customer dissatisfaction.

Records available to us indicate that your vehicle has one of the eligible engines.

Instructions for this Field Action have been sent to your local Detroit Diesel Authorized Repair Facility and the labor time required to perform this repair is approximately 3.1 hours.

Please contact a Detroit Diesel Authorized Repair Facility to arrange to have the Field Action performed. To locate an authorized facility, search online at www.detroitdiesel.com/loca tions/defautl.aspx . 

This service will be completed for you at no charge, prior to September 26, 2020, under the provisions of this notice.

We are sorry to cause you this inconvenience; however, we have taken this action in the interest of your continued satisfaction with our products.

 

 



2 Affected Products

Vehicles

MAKEMODELYEAR
DYNAMAXDX32017
DYNAMAXFORCE2017

 


9 Associated Documents

Recall Quarterly Report #2, 2020-1

RCLQRT-19V747-7909.PDF 211.23KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.28 KB]

 


ISSUED Renotification Notice

RCRN-19V747-3623.pdf 181.088KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [176.84 KB]

 


Recall Quarterly Report #3, 2020-2

RCLQRT-19V747-3855.PDF 211.311KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.36 KB]

 


Recall Quarterly Report #1, 2019-4

RCLQRT-19V747-6234.PDF 211.127KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.18 KB]

 


Defect Notice 573 Report

RCLRPT-19V747-6728.PDF 213.428KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [208.43 KB]

 


Recall Acknowledgement

RCAK-19V747-6549.pdf 244.969KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [239.23 KB]

 


Remedy Instructions and TSB

RCRIT-19V747-2195.pdf 556.809KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [543.76 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-19V747-9322.pdf 185.856KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [181.50 KB]

 


Recall Quarterly Report #4, 2020-3

RCLQRT-19V747-8963.PDF 211.418KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.46 KB]

 


Latest Recalls Documents

 


 

โ€œThis site contains affiliate links for which OEMDTC may be compensatedโ€
Bestseller No. 1
Bestseller No. 2
Dupli-Color DE1618 Engine Enamel Spray Paint with Ceramic - Detroit Diesel Alpine Green - 12 oz Aerosol Can
  • AUTOMOTIVE SPRAY PAINT โ€“ Dupli-Color Engine Enamel is a high-quality vehicle paint that contains Ceramic resins for maximum heat dissipation and gloss retention. The resins offer protection from exposure to excessive heat and automotive fluids.
  • PROFESSIONAL PAINT โ€“ This Detroit Diesel Alpine Green spray paint color is known for its durability. Dupli-Colorโ€™s Engine paint with Ceramic resists temperatures up to 500ยฐF intermittently and produces a finish that will not blister, flake, crack or peel.
  • EASY TO USE โ€“ Featuring a EZ Touch Conical Nozzle, this high heat car paint is easy to use and ensures maximum coverage on engine blocks and engine accessories. Itโ€™s dry to the touch in 30 minutes and can be handled in 1 hour.
  • IDEAL USES โ€“ Excellent for under-the-hood applications like cars, trucks, ATV and UTVโ€™s, this Dupli-Color spray paint will perform to the most rigorous standards of racing, street rod, and vehicle restoration enthusiasts.
  • DUPLI-COLOR โ€“ Since 1938, Dupli-Color has been the trusted brand leader in providing easy-to-use, innovative, products to restore, restyle and protect vehicle appearance.
Bestseller No. 3
20 PCS Stickers Pack Detroit Aesthetic Diesel Vinyl Colorful Waterproof for Water Bottle Laptop Bumper Car Bike Luggage Guitar Skateboard
  • SIZE & MATERIAL: 2.2 inches x 2.2 inches x 20 PCS. 100% Durable Vinyl. You would receive the patterns you see in the pictures
  • FEATURED: Indoors and Outdoors use. Easy to stick. Slim and lightweight with UV coating. Safe and Non-toxic, Waterproof Snow protection and Anti-sun, Glossy and Bright, Thick and Durable
  • PRODUCTION: Printed in the USA. Can use for Scrapbook, Luggage, Skateboard, Helmet, Bumper, Car, Bike, Motorcycle Refrigerator,Desk and furniture ect
  • USEFUL IN MANY CASES: Best decoration for Hydro Flask, Yeti, Tumbler, Laptop, Computer, Tablet, Phone Case, Headphones, Charger, Bluetooth Speakers, Water Bottle, Notebook
  • SATISFACTION: Your satisfaction is our promise. Perfect gifts for Mothers day and Fathers day, great to personalized DIY the thank you cards, invitation letter and envelope
Bestseller No. 4
Mens Womens Tshirt Detroit Diesel Shirts for Men Women Mothers Day Perfect Dad
  • Machine washable cotton t-shirts are comfortable and soft. It has an original fit that gives you room to move and a soft feel that only gets better with time.
  • T-shirt with sleeves and double-needle hem T-shirt with round neck and straight hem for easy, leisurely comfort
  • Perfect for Christmas, Father's Day for Dad, Mother's Day for Mom, gift idea for friends, perfect idea for your relatives or friends.
  • Gift for occasions: Casual, Sports, Beach or Daily Life, Good Choice to Pair with Denim Shorts or Jeans
  • Money back guarantee, your satisfaction is our promise and returns and exchanges are made easy This unisex t-shirt is made with heavy duty cotton that is designed to handle difficult working days.
Bestseller No. 5
For Detroit Diesel DD13 DD15 DD16 Engine Brake Adjustment Tools 4.6MM&4.1MM+Barring Tool+TDC Locating Pin W470589042300 W470589022300 W47058900150 W470589046300/J-46392 Heavy Duty Steel (4 Tools)
  • Great Compatibility โ€” Fit for all years of Detroit Diesel DD13 DD15 DD16 EPA07 EPA10.
  • Includes 4 Tools โ€” 1-Engine Brake Adjustment Tool 4.6MM / 1-Engine Brake Adjustment Tool 4.1MM / 1-Engine Barring Tool (Turning tool) / 1-TDC Locating Pin.
  • Easier Work โ€” Replace W470589042300 / W470589022300 / J-46392 or W904589046300 / W470589001500 and work in an easier way to save your time and money.
  • Superior Quality โ€” Advanced heavy duty soild steel structure and black non-slip PVC coated handle, durability and anti-corrosion. Ultra-precise design meets the requirement of high precision and hardness and a much longer service life.
  • 100% Satisfaction Guarantee โ€” If you're not 100% satisfied with our items, simply return it for refund within 30 days. Support 12-month Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!
Bestseller No. 6
Oni Tools J-47912 DETROIT DIESEL S60 MBE 900 MBE 4000 DD13 DD15 FUEL SYSTEM PRIMING PUMP OTC5869 Alternative
  • Applications: Detroit Diesel S60 MBE 900 MBE 4000 DD13 DD15 and Maxxforce 11 & 13 2010 & newer and N13 with SCR (Selective Catalytic Reduction) 2013 & newer..
  • Alternative to OEM: Kent-Moore J-47912 OTC5869 and 12-922-01 or 15-922-01
  • Includes: Complete tank, Pump, 6' Low Pressure Hose Assembly, compu-check quick connect fitting, Pressure Gauge
  • Material: High quality stainless steel tank eliminates corrosion and holds up to 3 gallons
  • PATENT PENDING
Bestseller No. 7
E-cowlboy 19MM High Pressure Fuel Line Socket Tool for Detroit Diesel DD13 DD15 DD16 Alternative to W47058090900
  • GREAT COMPATIBILITY: 19mm socket specifically design to fit for all Detroit Diesel DD13, DD15 & DD16 High Pressure Fuel Lines.
  • HIGH QUALITY: Constructed from high standard steel with reinforced and heat treated, resisting rust, corrosion and tear, ensures an unparalleled long lifespan!
  • ALTERNATIVE NO.: Alternative to W47058090900
  • EASY TO USE: Our 19mm high pressure fuel line socket will quickly make your job done, highly efficient save your time.
Bestseller No. 8
Bestseller No. 9
Bestseller No. 10
E-cowlboy 3350 Injector Height Gauge Kit for Detroit Diesel Series 50 & 60 Engines, Plastic & Metal Body, Includes 78.2mm, 78.8mm, 80.3mm, 81.0mm & 82.1mm Gauge Blocks, HG - 1590
  • Applications โ€” Fit for Detroit Series 50 and Series 60 engines. 78.2mm: 60 DDEC-I 1986-1993 / 78.2mm: 60 & 50 DDEC-II 1986-1993 / 78.8mm: 60 & 50 DDEC-III 1994-1997 / 80.3mm: 60 DDEC-III Late 1997 / 80.3mm: 60 & 50 DDEC-IV 1997-1998 / 81.0mm: 60 & 50 DDEC-IV 1998-1999 / 81.0mm: 60 Marine 2000-2003 / 82.1mm: 60 See Service.
  • Benefit โ€” Properly set injector body height to the injector follower for proper fuel injector timing. Incorrect injector timing can cause engine power issues, poor idle quality and fuel mileage issues.
  • Includes โ€” 78.2mm, 78.8mm, 80.3mm, 81.0mm and 82.1mm gauge blocks along with knurled handle that allows for block to be used at 90ยฐ angle for use in areas with restricted access.
  • Easier Work โ€” Be sure the height gage seats on the machined surface with the tip in the pilot hole. Adjust the height until you can slide over it and find that slight drag.
  • 100% Satisfaction Guarantee โ€” If you're not 100% satisfied with our items, simply return it for refund within 30 days. Support 12-month Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!

Last update on 2025-04-15 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...