โThis site contains affiliate links for which OEMDTC may be compensatedโ |
December 13, 2019 NHTSA CAMPAIGN NUMBER: 19V891000
Hitch Bolts Insufficiently Tightened
If the motorhome is towing a trailer or vehicle, the hitch detaching from the motorhome can the risk of a crash.
NHTSA Campaign Number: 19V891
Manufacturer Forest River, Inc.
Components TRAILER HITCHES
Potential Number of Units Affected 194
Summary
Forest River, Inc. (Forest River
) is recalling certain 2020 Georgetown and FR3 motorhomes. The trailer hitch bolts may not have been properly tightened, which can allow cause the hitch to detach from the chassis.
Remedy
Forest River will notify owners, and dealers will properly torque the bolts, free of charge. The recall began January 7, 2020. Owners may contact Forest River
customer service at 1-574-296-7600. Forest River
’s number for this recall is 68-1119.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
IMPORTANT SAFETY RECALL
FOLLOW-UP NOTICE OF SAFETY DEFECT
Our records indicate your vehicle has not been remedied; for your Safety and the Safety of others, please have your vehiclesโ recall remedied as soon as possible.
NHTSA RECALL: 19V891
CANADA RECALL: 2019-635
FR ID: 68-1119
<<VIN>>
<<OWNER NAME/DEALERNAME>>
<<ADDRESS>>
<<CITY>>, <<ST>> <<ZIP-XXX>>
6/22/2020
This Notice applies to your vehicle VIN listed above.
Dear Forest River Customer:
This notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This notice is also sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Forest River โ Office of Corporate Compliance (โOCCโ) has decided that a defect, which relates to the motor vehicle safety, exists in certain 2020 Forest River
Georgetown and FR3 motorhome recreational vehicles. This is to inform you that your vehicle may contain a defect that could affect the safety of a person.
WHAT IS THE DEFECT/NONCOMPLIANCE?
Per the notice received from MORryde: “The hitch is attached to the chassis using 6 bolts that are recommended to be torqued to 80 ft/lb. Some of the bolts are not torqued to the recommended ft/lb.”
EVALUATION OF THE RISK TO THE VEHICLE AND OPERATOR(S) RELATED TO THE RECALL.
Loose hitch bolts could cause the hitch to come unfastened from the chassis if the RV owner is using the hitch to tow a vehicle or trailer. Which can increase the risk of a crash
WHAT IS FOREST RIVER AND OUR DEALERSHIPS GOING TO DO?
Forest River is notifying dealerships of the recall. You may have the recall corrected at any Forest River
dealership. However, it is preferable if you have your selling dealership perform the remedy. Forest River
completely covers your cost for the remedy; you will not receive any bill of sale for anything covered under the above recall number.
WHAT SHOULD YOU DO?
Please contact your dealer without delay and request a service appointment to schedule the free remedy which will include checking the torque on the hitch bolts and torqueing to the required 80 ft/lb if needed. The vehicle Owner is responsible for making arraignments to have the work completed. Please state you have been notified by Forest River of having a recall in process for your vehicle and provide the recall number for the dealership. It is also helpful to the dealership to have a copy of this letter when you take your vehicle in for the recall remedy.
You may also visit www.forestriverinc.com for dealer locations.
HOW LONG WILL THE REMEDY PROCESS TAKE?
The estimated time of repair is .25 hours. However, the dealership may need to keep your vehicle or schedule an appointment with you for a later date to fit into their regular service schedule.
WHAT IF YOU HAVE PREVIOUSLY PAID FOR REPAIRS TO YOUR VEHICLE FOR THIS PARTICULAR CONDITION?
If you have already paid for a repair that is within the scope of this defect under recall, you still need to have this recall inspected and/or performed to ensure the correct parts and procedures were utilized.
Additionally, you may be eligible for a refund of previously paid repairs. Refunds will only be provided for within the scope of this defect under recall.
Please send the service invoice to the following address:
Georgetown/FR3
Forest River, Inc.
Attn: WARRANTY MANAGER
55135 CR 1
Elkhart, IN 46514
What if you no longer own this vehicle?
If you no longer own this vehicle and have the address for the current owner, please forward this letter to the new owner within 10 working days after the day in which the notice is received. You have received this letter because government regulations require that a notification is sent to the last known owner of record. Our records indicate that you are the current owner.
PLEASE NOTE: FEDERAL LAW REQUIRES THAT ANY VEHICLE LESSOR RECEIVING THIS RECALL NOTICE MUST FORWARD A COPY OF THIS NOTICE TO THE LESSEE WITHIN TEN DAYS.
WHAT IF I HAVE ALEADY HAD THIS RECALL PERFORMED?
Please provide a copy of the work order, or invoice showing the recall was performed. Please ensure the VIN is visible on the paperwork and send it to:
Email: occinfo@forestriverinc.com
Mail: Forest River Office of Corporate Compliance
423 N Main St Middlebury, IN 46540
MAY FOREST RIVER ASSIST YOU FURTHER?
If you have difficulties getting your vehicle repaired, please contact your Forest River Representative listed below:
CONTACT | PHONE |
CUSTOMER SERVICE | (574) 206-7600 |
If you are still having difficulty getting your vehicle/towable repaired in a reasonable amount of time or without change, you may write to the following address:
For US Owners Please Contact: | For Canadian Owners Please Contact: |
Administrator National Highway Traffic Safety Administration 1200 New Jersey Ave, S.E. Washington, D.C. 20590Or you may call the toll free Vehicle Safety Hotline at 1-888-327-4236 or (TTY: 1-800-424-9153). Or visit www.safercar.gov and search; | Head of Recalls Motor Vehicle Safety Investigations Laboratory Transport Canada 80 Noรซl street, Gatineau, Quebec, J8Z 0A1Telephone (800) 333-0510 Facsimile (819) 420-4292 Recall ID: 2019-635 |
2 Affected Products
Vehicles
MAKE | MODEL | YEAR |
FOREST RIVER![]() | FR3 | 2020 |
FOREST RIVER![]() | GEORGETOWN | 2020 |
7 Associated Documents
Recall Quarterly Report #1, 2020-1
RCLQRT-19V891-1566.PDF 211.131KB
ISSUED Renotification Notice
RCRN-19V891-3856.pdf 213.217KB
Recall Quarterly Report #2, 2020-2
RCLQRT-19V891-9862.PDF 211.229KB
Recall Acknowledgement
RCAK-19V891-8681.pdf 244.767KB
Defect Notice 573 Report
RCLRPT-19V891-2490.PDF 213.768KB
Defect Notice 573 Report
RCLRPT-19V891-2643.PDF 213.768KB
Recall Quarterly Report #3, 2020-3
RCLQRT-19V891-3543.PDF 211.317KB
Latest Recalls Documents
โThis site contains affiliate links for which OEMDTC may be compensatedโ |
- Wide Application: Suitbale for a ball mount, cargo carrier
, bicycle frame, trailer hitch, winch and other heavy accessories. Durable and reliable in bad weather. Fastens to the frame with included hardware
- Premium Quality: Made of heavy duty steel for maximum strength whiling towing. Gross Trailer Weight: 3500 lbs; Tongue Weight: 350 lbs
- Specification: Surface Finish: Black Powder Coated; Attachment Location: Rear; Receiver Size: 2''. Direct replacement for 13703. Fit for 72 inch wide frames. Height adjustable for different vehicles, easy to install and remove
- Package Included: You will receive 1 X Trailer Hitch, others as shown in pictures. Note: Instructions & mounting hardware are included
- Installation: Direct bolt on installation. No modification required. Professional installation is always highly recommended
- Attention: This accessories is NOT intended for RV level Trailer towing Purpose, PLEASE BE CAREFUL to using
- [STANDARD FIT] This hitch receiver has 2" x 2" tube opening. Fits most of bike racks, cargo carriers with 2" shank. It has a 200 lbs tongue weight capacity. 5/8" hitch pin or hitch lock not included
- [EASY TO INSTALL] It has 4 full threaded bolts and nuts. It can be easily mounted on your RV bumpers. Fits most of 4" to 4-1/2" Continuous Steel Bumper Beams (Can be Mounted Upside Down). Bolts Need to be Secure Tightly Around the Travel Trailer Bumper
- [DEPENDABLE STRENGTH] Made of heavy duty steel construction. Robotically weld provides more secure
- [CORROSION RESISTANCE] For long term use, this hitch adapter is protected by a durable black powder coating finish. These topcoats resist rain, dust, snow, road salt, and other corrosive substances
- DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
- VERSATILE DESIGN. This trailer hitch RV equips your camper
with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can be used for dinghy towing, flat towing or towing a trailer
- EASY TO INSTALL. Installation of this RV camper
hitch is fast and easy. It securely bolts into place with the included grade-8 hardware and typically requires just a few tools. The 3-piece adjustable design fits RV frames up to 72 inches wide
- FULLY TESTED. Every CURT camper
hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
- RUST, CHIP, UV-RESISTANT. This RV towing hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The two finishes are co-cured for exceptional resistance to rust, chipping and UV damage
- Use Only For 2"x2" Square Tubes: Designed specifically for 4"-4.5" bumpers, this receiver is made for use with 2"x2" square tubes. Ensure that there is at least 1" of space between the bumper and trailer before installation. (Please check the bumper size carefully before purchasing.)
- 200lbs Tongue Weight Capacity: The Ohuhu Camper
Bumper Hitch has a 200lbs tongue weight capacity that you can rely on. (Note: It is NOT intended for towing purposes.)
- Quick, Easy Installation: No need for complicated welding to make the Ohuhu Hitch Receiver work. You can hook it up to a bicycle rack, RV tire rack, cargo rack or other accessories. Simply install it on the bumper and you are good to go. (It can be Mounted Upside Down.)
- Sturdy and Durable: Hold it together, for the long term! Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs. You can trust in the Ohuhu Trailer Receiver to do its job every time.
- Accessories Included: Also included with your purchase are a set of 5/8" hitch pins and 1 rubber cap. Use the pins to secure the rack once installed on the hitch receiver to make it more stable, and the rubber cap to cover the hitch receiver when not in use.
- Weight Capacity: Features a Class I hitch bolted on the frame with a maximum tongue weight of 200 pounds and a Class II hitch welded to the frame with a tongue weight capacity of 300-350 pounds, accommodating a variety of towing needs.
- Reliable Functionality: 2" x 2" hitch receiver,providing secure connection points when you're in need of assistance or heading out on a trip.
- Robust Construction: Made from high-quality steel with a sleek black powder-coated finish, offering exceptional strength, impact resistance, and protection against the elements.
- Versatile Fitment: Ideal for towing fishing boat trailers, popup campers
, and bikes, making it a great choice for everyday use and outdoor adventures.
- Easy Installation: Comes complete with 1 trailer hitch, mounting hardware, and instructions. Professional installation is recommended for optimal safety and performance.
- ใ STANDARD FIT ใ Fits standard 4" x 4" RV or travel trailer bumper/beam, use for both downside and upside, the bolts Need to be secure tightly around the travel
- ใ 2 INCH RECEIVER FIT ใAccept hitch mount with 2" shank such as bike racks, RV tire carriers, cargo carriers or other accessories
- ใ CAPACITY ใ 3500lbs. Gross trailer weight, 350lbs. Max tongue weight, Do NOT use for RV level Trailer towing Purpose
- ใ WEATHER RESISTANT ใFinished in black power coating provide durable and strong conditions, resist dust and corrosion, adds extra durability, can be used with an anti-rattle kit
- ใ POWERFUL& DURABLE BUILD ใ Heavy duty steel via robotically welded for superior strength provide excellent mounting facility, high quality hardware fittings, all make this adjustable trailer hitch more durable
- Fitment: This trailer hitch is great for tow fishing boat trailers, popup campers
, trailers and bikes. Widely used in daily life.
- Function: 2" hitch for travel trailers and fifth wheels. It is mounted on the rear of the trailer and is used to tow the vehicle when facing trouble. Class I hitch bolted onto frame, Max tongue weight : 200 pounds. Class II hitch welded to frame, tongue weight: 300-350 pounds.
- Feature: Material: Steel; Color: Black; Finish:Powder Coated. Durable, strong strength and impact resistance meet your towing needs.
- Package Include: 1pc of trailer hitch. Mounting hardware and instruction are included.
- Installation: Install by screws. Professional installation is always highly recommended.
- LEVEL TOWING. This weight distribution hitch offers a smoother ride and improved control by distributing the tongue weight of the trailer across the vehicle-trailer combination and leveling the load. It also includes a trailer sway control bar
- CONTINUOUS LUBRICATION. This CURT weight distribution hitch with sway control is equipped with an integrated lubrication system for smooth, quiet towing. The hitch head has two easy-access grease zerk fittings for continuous lubrication
- RELIABLE STRENGTH. This load-leveling hitch is constructed with a fabricated head and has 31-3/16-inch long forged steel spring bars. It is rated to tow 10,000 to 14,000 lbs. gross trailer weight and 1,000 to 1,400 lbs. tongue weight
- STANDARD FIT. To ensure maximum versatility, this stabilizer hitch comes with a highly adjustable 2-inch shank that fits virtually any industry-standard 2-inch trailer hitch receiver. It also includes a pre-torqued 2-5/16-inch trailer ball
- CORROSION-RESISTANT. For long-lasting resilience to the elements, this weight distribution hitch with sway control is covered in a durable carbide black powder coat finish
- DEPENDABLE STRENGTH. This RV trailer hitch is rated for 5,000 lbs. GTW, 500 lbs. TW, 6,000 lbs. WD and 600 lbs. WDTW (limited to lowest-rated towing component)
- VERSATILE DESIGN. This trailer hitch RV equips your camper
with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can be used for dinghy towing, flat towing or towing a trailer
- EASY TO INSTALL. Installation of this RV camper
hitch is fast and easy. It securely bolts into place with the included grade-8 hardware and typically requires just a few tools. The 3-piece adjustable design fits RV frames up to 51 inches wide
- FULLY TESTED. Every CURT camper
hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
- RUST, CHIP, UV-RESISTANT. This RV towing hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The two finishes are co-cured for exceptional resistance to rust, chipping and UV damage
- The RV Camper
bumper hitch adapter 2 in receiver are designed to fits travel trailer 4โ x 4โ bumper beams.
- Differ from towever 83801: Offer lower hitch point to provide level trailer towing, more capacity for pulling than holding bike rack, cargo carrier
, pls check the bumper capacity firstly. Some bumpers need be reinforced.
- The RV accessories Capacity: 3500lbs. Gross trailer weight, 350lbs. Max tongue weight.
- 2 bolts included for Mounting hardware, and the bumper hitch can be mounted both downside and upside.
- Heavy duty constructed and black powder coated for corrosion resistance.ATV hitch adapter is hitch extender 2 inch, good rv camper
accessories for travel trailers.
Last update on 2025-04-15 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.