โThis site contains affiliate links for which OEMDTC may be compensatedโ |
December 2, 2019 NHTSA CAMPAIGN NUMBER: 19E081000
If the leaf spring breaks, it can separate from the vehicle and become a road hazard, increasing the risk of a crash.
NHTSA Campaign Number: 19E081
Manufacturer IMT Standen’s Limited Partnership
Components SUSPENSION
Potential Number of Units Affected 210
Summary
IMT Standen’s Limited Partnership (Standen) is recalling certain 3 Leaf Tapered Springs, part numbers 355-00 and TRA 2727, sold as aftermarket replacements for installation on dry van or refrigerated and flatbed trailers. The leaf springs may crack allowing the leaf springs to break prematurely.
Remedy
Standen will notify owners, and will replace the springs, free of charge. The recall is expected to begin in January 2020. Owners may contact Standen customer service at 1-403-258-7800.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
IMPORTANT SAFETY RECALL
RECALL NO. 19E-081
January 2020
Customer
Address
Address
Dear Standenโs Customer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
IMT Standenโs Limited Partnership (Standenโs) has decided that a defect which relates to motor vehicle safety exists in certain Taper Trailer Leaf Springs intended for aftermarket installation in dry van, refrigerated or flatbed trailers. We are notifying you because distribution records indicate that you may have purchased one of these products.
What Products are Involved?
This recall involves Standenโs Taper Trailer Part Number 355-00 (alternate TRA-2727) with Lot Number J977E. Figure 1 below illustrates the Part and Lot Number Identification marks.
Figure 1 Showing Part Number (355-00) and Lot Number (J977E) physically stamped into the ends of each leaf spring. The part may also have a temporary label with Alternate Part Number (TRA-2727).
What is the Problem?
Nonconforming steel supplied by a third-party supplier may have been used in the production of the subject leaf springs. As a consequence, the leaf spring could experience premature failure. If the leaf spring fails, there is a potential for portions of the leaf spring to break off and fall onto the roadway, presenting a road hazard and increasing the risk of a vehicle crash for other road users. If the leaf spring fails, the vehicle operator may notice a reduction in ride quality.
What Should You Do?
Do not use the recalled product in your dry van, refrigerated or flatbed trailers.
If you installed a Standenโs Taper Trailer Part Number 355-00 (alternate TRA-2727) with Lot Number J977E, you should return the Leaf Spring to the place of purchase for replacement. Standenโs will refund the replacement part and reimburse other costs including ground freight and labor at industry standard shop rates under the following guidelines:
- A photograph is provided showing the replaced part(s) matches Lot Number J977E (refer to Figure 1 on page 1 to identify the affected product.)
- Work is completed by a Licensed Service Provider. The repair will take 2 hours.
Standenโs Leaf Springs that do not have Lot Numbers J977E stamped into the part are unaffected by this issue.
Questions or Concerns?
If you have questions or concerns about this recall, please contact Standenโs Quality Assurance Representative at Quality@standens.com. If you are unable to obtain a remedy without charge within a reasonable time, you may submit a complaint to: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
Standenโs is taking this action in the interest of your safety and satisfaction with our products. We apologize for any inconvenience and thank you for your attention to this matter.
Sincerely,
Quality Assurance
IMT Standenโs Limited Partnership (Standenโs)
IMPORTANT SAFETY RECALL
RECALL NO. 19E-081
January 2020
Dear Standenโs Distributor:
We are writing to inform you that IMT Standenโs Limited Partnership (Standenโs) is conducting a safety recall of a small population of Taper Trailer Leaf Springs intended for aftermarket installation in dry van, refrigerated or flatbed trailers.
This recall involves Standenโs Taper Trailer Part Number 355-00 (alternate TRA-2727) from Lot Number J977E.
Parts were shipped to our distributors starting between approximately October 30, 2019 and November 15, 2019.
What is the Problem?
Nonconforming steel supplied by a third-party supplier may have been used in the production of the subject leaf springs. As a consequence, the leaf spring could experience premature failure. If the leaf spring fails, there is a potential for portions of the leaf spring to break off and fall onto the roadway, presenting a road hazard and increasing the risk of a vehicle crash for other road users. If the leaf spring fails, the vehicle operator may notice a reduction in ride quality.
We note that normal wear and tear can, over time, also lead to failure of a leaf spring. We are taking this action because the nonconforming steel may cause a leaf spring to fail much earlier in the product life.
This issue is limited to Standenโs Taper Trailer Part Number 355-00 (alternate TRA-2727) with Lot Number J977E. Figure 1 below illustrates the Part and Lot Number Identification marks.
Figure 1 Showing Part Number (355-00) and Lot Number (J977E) physically stamped into the ends of each leaf spring. The part may also have a temporary label with Alternate Part Number (TRA-2727).
What Should You Do?
- Product Remaining in Your Inventory: If any recalled leaf springs remain in your inventory, you should quarantine them and contact Standenโs Quality Assurance Representative for return authorization at Quality@standens.com.
IMPORTANT NOTE: Federal law prohibits the sale of the recalled products.
- Products You Sold to Other Resellers: If you sold the recalled products to reselling customers (such as installers and retailers), you must do the following: (1) forward a copy of this letter to them within five (5) business days of receipt, and (2) provide Standenโs Quality Assurance Representative with the contact information for the reselling customers to enable us to provide direct notification to those customers and track the recallโs progress. Reselling customers should provide consumer contact information to Standenโs Quality Assurance Representative at Quality@standens.com.
- Products You Installed or Sold to Consumers: If you sold the recalled product to consumers, you must immediately provide Standenโs Quality Assurance Representative the contact information for those consumers.ย Standenโs will notify them using the attached letter, which advises consumers of the issue and provides return instructions.
* * *
Please contact Standenโs Quality Assurance Representative if you have any questions about this recall.
We apologize for any inconvenience this may cause, but we are taking this action in the interest of our customersโ personal safety and satisfaction with our products. We appreciate your cooperation and prompt attention to this important matter.
Sincerely,
Quality Assurance
IMT Standenโs Limited Partnership (Standenโs)
Enclosure (Owner Letter)
1 Affected Product
Equipment
BRAND | PART NO. | PRODUCTION DATES |
STANDEN | 3 LEAF TAPERED SPRING | 10/18/2019 – 10/30/2019 |
10 Associated Documents
Manufacturer Notices(to Dealers,etc)
RCMN-19E081-6042.pdf 633.114KB
ISSUED Owner Notification Letter(Part 577)
RCONL-19E081-8702.pdf 705.86KB
Recall 573 Report – Amendment 2
RCLRPT-19E081-1488.PDF 214.573KB
Recall Acknowledgement
RCAK-19E081-4302.pdf 244.319KB
Defect Notice 573 Report
RCLRPT-19E081-2004.PDF 214.571KB
Recall Quarterly Report #1, 2020-1
RCLQRT-19E081-5869.PDF 211.122KB
Recall 573 Report – Amendment 1
RCLRPT-19E081-8832.PDF 214.569KB
Recall Quarterly Report #2, 2020-2
RCLQRT-19E081-6253.PDF 211.224KB
Recall Quarterly Report #3, 2020-3
RCLQRT-19E081-2914.PDF 211.308KB
Recall Quarterly Report #4, 2020-4
RCLQRT-19E081-1654.PDF 211.412KB
Latest Recalls Documents
โThis site contains affiliate links for which OEMDTC may be compensatedโ |
- Direct replacement - these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
- Ideal solution - seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
- Durable construction - made from quality materials to strict specifications to ensure reliable performance and long service life
- Trustworthy quality - engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- Direct replacement - these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
- Ideal solution - seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
- Durable construction - made from quality materials to strict specifications to ensure reliable performance and long service life
- Trustworthy quality - engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- Direct replacement - these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
- Ideal solution - seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
- Durable construction - made from quality materials to strict specifications to ensure reliable performance and long service life
- Trustworthy quality - engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA
- Support available - every Dorman
part is backed by Dorman
's ASE Blue Seal Certified technical support team
- Specifications: 4 leaves; Eye to eye length: 25-1/4" ; Free open: 3" ; Width of leaf: 1-3/4" ; Eye diameter with bushing: 9/16" ; Eye diameter without bushing: 11/16" ; Leaf thickness: 3/8"
- Fitment Fits for: SW4; 2500 lb capacity per spring for 5000 lbs trailers. Please check the load rating to ensure that the correct leaf spring is selected.
- High Quality Materials: Our trailer leaf spring kits are made of 60Si2Mn (Manganese Steel) for greater strength, flexibility and hardenability. The surface has 2 coats of paint, which has good corrosion resistance.
- Ideal Solution: Seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement when the vehicle sags, bounces excessively, or rides unevenly.
- Trailer Leaf Spring Note: These leaf springs are NOT designed for ANY automobiles of any kind. These will NOT fit cars, trucks, van, or tractors. Please do not buy these UNLESS you are doing so for the trailer they are intended.
- Direct replacement - these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
- Ideal solution - seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
- Durable construction - made from quality materials to strict specifications to ensure reliable performance and long service life
- Trustworthy quality - engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- Direct replacement - these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
- Ideal solution - seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
- Durable construction - made from quality materials to strict specifications to ensure reliable performance and long service life
- Trustworthy quality - engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- Uncompressed Arch (in) 8.75 | Length (in) 47.75"
- Uncompressed Half Length (in) 28.75 | Width (in) 2.5
- Bushings included.
- Easy bolt-on installation.
- Backed by Rough Country's Limited Lifetime Replacement Warranty.
- Direct replacement - these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
- Ideal solution - seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
- Durable construction - made from quality materials to strict specifications to ensure reliable performance and long service life
- Trustworthy quality - engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- Fitment: For 1988-1998 Chevrolet
C1500; For 1988-1998 GMC
C1500;For 1999-2019 GMC
Sierra 1500; For 1999-2019 Chevrolet
Silverado 1500
- Feature:Zinc Coated Square U-Bolts with Hardware for 2.5" Wide Leaf Springs; Part Type๏ผSuspension Lift Kit๏ผPerformance/Custom๏ผPlacement on Vehicle๏ผLeft, Right, Front, Rear
- Package Included:(4pcs) Square Zinc Coated U-bolts;Included Hardware๏ผMounting Hardware as Shown, U-bolts;Part Number:Rear Lift Block Deavers
- Measurement: Size:8.75" Long;9/16" Diameter;Length is measured from the bottom of the bend to the end of the threads
- Please make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool before purchasing
- Direct replacement - these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
- Ideal solution - seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
- Durable construction - made from quality materials to strict specifications to ensure reliable performance and long service life
- Trustworthy quality - engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
Last update on 2025-04-15 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.