| “This site contains affiliate links for which OEMDTC may be compensated” |
February 24, 2020 NHTSA CAMPAIGN NUMBER: 20E008000
If the drum transmission fails while the vehicle is in motion, the drum may stop rotating and concrete could discharge from the drum onto the road, increasing the risk of crash.
NHTSA Campaign Number: 20E008
Manufacturer McNeilus
Truck & Manufacturing, Inc.
Components EQUIPMENT
Potential Number of Units Affected 3
Summary
McNeilus Truck & Manufacturing, Inc. (McNeilus) is recalling certain ZF CML12 Ring Gear Carriers, part number 1474124, with serial numbers 5250958, 5250960 and 5250961, sold as field service parts. The ring gear carriers may have cavities located in the toothing, which can lead to premature failure of the drum transmission.
Remedy
McNeilus will notify owners and will inspect and replace the drum transmissions, as necessary, free of charge. The recall began March 9, 2020. Owners may contact McNeilus customer service at 1-888-686-7278.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
1 Affected Product
Equipment
| BRAND | PART NO. | PRODUCTION DATES |
| ZF | CML12 | |
7 Associated Documents
Recall Acknowledgement
RCAK-20E008-3931.pdf 244.723KB
Loading...
Reload document 
Open in new tab
Defect Notice 573 Report
RCLRPT-20E008-9366.PDF 214.084KB
Loading...
Recall 573 Report – Amendment 1
RCLRPT-20E008-6814.PDF 214.376KB
Loading...
Recall Quarterly Report #1, 2020-1
RCLQRT-20E008-0619.PDF 211.12KB
Loading...
Recall Quarterly Report #3, 2020-3
RCLQRT-20E008-3507.PDF 211.301KB
Loading...
Recall Quarterly Report #2, 2020-2
RCLQRT-20E008-9251.PDF 211.216KB
Loading...
Recall Quarterly Report #4, 2020-4
RCLQRT-20E008-3897.PDF 211.409KB
Loading...
Latest Recalls Documents
- Contains extraordinary anti-wear and lubricity agents, ensuring exceptional protection against wear and reducing drag
- Helps to control heat
- Incorporates Lucas cutting-edge additive technology derived from top-rated Lucas Heavy Duty Oil Stabilizer, the number one supplemental oil in the heavy-duty industry
- Available in 1 quart and 1 gallon bottle sizes
- Protects Against Severe Temperatures To Help Extend Service Life
- Formulated With Extreme-Pressure Additives To Minimize Gear Wear From Shock Loads
- Helps Protect Against Gear Wear From Scuffing, Scouring, Corrosion And Pitting
- Recommended For Conventional Hypoid Differentials And Non-Synchronized Manual Transmissions In Passenger Cars, Light Trucks, Sport Utility Vehicles, Vans And Heavy-Duty Trucks Where An Api-Gl5 Or Gl-4 Fluid Is Specified
- Contains extraordinary anti-wear and lubricity agents, ensuring exceptional protection against wear and reducing drag
- Helps to control heat
- Incorporates Lucas cutting-edge additive technology derived from top-rated Lucas Heavy Duty Oil Stabilizer, the number one supplemental oil in the heavy-duty industry
- Available in 1 quart and 1 gallon bottle sizes
- Works in tight spaces and makes gear oil easier to use.Fit Type: Universal
- Full Synthetic formula for exceptional high and low temperature protection
- Contains an extreme pressure additive for better load carrying capacity and wear protection
- Excellent thermal stability designed to protect oil from high temperature breakdown
- Formulated for ultimate gear protection and performance
- WIDEST SPEC RANGE ON THE MARKET: widely compatible with a very large number of hypoid gear systems, differentials, transmissions and axle assemblies.
- SEVERE SERVICE MAX: Exceptional shear stability and oxidation resistance. Polyphosphate EP proprietary additive system offers substantial improvement in performance over previous generation, low cost, gear oils
- BUILT IN LIMTED SLIP ADDITIVE - Does not require "additional" LS additive. Its built into the product, optimized for all limited slip differentials, including those with built in wet brakes.
- OUTSTANDING SCUFFING PROTECTION - Superb gear and syncron protection, facilitating extremely long transmission life. Exceeds Load Stage 13 extreme pressure requirements beyond 120,000 lbs / sqi.
- SHEAR STABLE - Excellent thermal stability and high load capacity without viscosity breakdown, facilitates excellent film strength under high loads, high temp and high shear conditions.
- Direct replacement for Mercury Marine 858058K01
- Provides maximum protection against excessive wear, corrosion and pitting for extended gear life in marine applications
- Contains additives to protect gears if water enters the gear case or lower unit
- Recommended for use in outboard motor gear cases and marine lower units in applications below 75hp
- 80W-90 viscosity
- Product Type :Auto Accessory
- Package Dimensions :8.89 Cm L X10.922 Cm W X30.48 Cm H
- Country Of Origin :United States
- Package Weight :2.0Lbs
- EXTREME-PRESSURE PERFORMANCE: U1P-Gear 80W90 Gear Oil, API GL-5, defends against high-speed, low-speed, and high-torque conditions, minimising wear from shock loads with superior anti-scuffing additives.
- TEMPERATURE RESILIENCE: With exceptional thermal stability, our 80W-90 differential fluid safeguards against severe temperatures, ensuring longevity and cleanliness for extended service life.
- PRECISION WEAR PROTECTION: Formulated with anti-wear additives, this API GL5 gear oil shields gear teeth from pitting, spalling, and scouring, offering advanced protection against scuffing, corrosion, and chattering.
- VERSATILE APPLICATION: Recommended for conventional hypoid differentials and manual transmissions, this product is ideal for passenger cars, trucks, SUVs, and vans, meeting API GL5 / GL4 gear oil specifications.
- SHEAR STABILITY AND ANTI-CORROSION: The shear-stable formulation resists rust, oxidation, foaming, and varnish, guaranteeing reliable performance and corrosion protection in diverse driving conditions.
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.