โThis site contains affiliate links for which OEMDTC may be compensatedโ |
April 27, 2020 NHTSA CAMPAIGN NUMBER: 20V235000
Parking Brake may not Hold Vehicle/ FMVSS 105
A parking brake system that is set to an insufficient application force may result in an increased possibility of unintended vehicle movement, which increases the risk of injury to bystanders.
NHTSA Campaign Number: 20V235
Manufacturer Blue Bird Body Company
Components PARKING BRAKE
Potential Number of Units Affected 3
Summary
Blue Bird Body Company (Blue Bird) is recalling certain 2009-2019 Vision transit buses. The floor-mounted parking brake may fail to hold the vehicle stationary on an incline when the vehicle is loaded to its maximum weight, due to an insufficient application force. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 105 “Hydraulic and Electric Brake Systems.”
Remedy
Blue Bird will notify owners, and dealers will inspect the floor mounted park brake application force hand lever assembly and adjust the application force, as necessary, free of charge. The recall is expected to begin June 24, 2020. Owners may contact Blue Bird customer service at 478-822-2242. Blue Bird’s number for this recall is R20AO-SB.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
RECALL
R20AO Hydraulic Brake Floor Mounted Hand Lever Setting
Models Affected: Certain MY 2007-2013 All American and MY 2006-2021 Visions
Issue: The right-hand floor mounted park brake hand lever tension may not be set correctly.
Corrective Action: With the use of a calibrated hand-held force gauge check the force required to apply the hand park brake lever is 90-95 ft. pounds
Parts/Items Needed:
Item | Description | Quantity |
1 | Calibrated hand-held force gauge. | 1 |
2 | Gauge attachment ring or 16โ of ยผโ rope | 1 |
3 | 2 MM Allen wrench | 1 |
4 | 1/2โ open end wrench | 1 |
WARNING:
Always follow all Federal, State, Local and Shop safety standards and use proper safety equipment, and thoroughly read and understand all instructions before performing these procedures. Park bus on level surface, apply parking brake, turn off ignition key, and chock wheels.
INSPECTION:
1. Use the instructions below to confirm the setting of the park brake handle, in the released position.
2. Attach the force gauge to slowly pull up the hand lever to the peak park brake applied location. (Reference Photo B)
3. It is important to keep the force gauge direction of pull at a 90-degree angle to the lever, as the lever rotates to the park brake applied location.
FORCE GAUGE INSTRUCTIONS:
1. Place the park brake handle in the released position.
2. Attach a 16โ rope tied into a loop if your force gauge is not equipped with a loop strap. (Reference Photo A)
3. Slowly pull up the hand lever to the peak park brake applied location. (Reference Photo B)
4. Pull several times to verify the setting.
5. If the force setting is 90 to 95 FT lbs. No other actions are required.
ADJUSTMENT INSTRUCTIONS:
1. If adjustment is required, loosen the 2MM Allen set screw on the side of the handle and rotate the handle clockwise to increase or counter clockwise to decrease the LBS. (Reference Photo C). Tighten the set screw.
2. If the lever handle rotation adjustment will not obtain the proper FT LBS, the ยผโ cable yoke at the bell crank lever at the brake will need to be adjusted. (Reference Detail 1)
3. Repeat the Force Gauge Instructions above to verify the proper setting.
4. Apply park brake, after process is complete.
R20AO
FINAL NOTICE
DATE: | November 18, 2020 |
TO: | Blue Bird Owners |
Subject: | Recall R20AO, FMVSS 105 Noncompliance โ Hydraulic Brake Units W/Floor Mounted Park Brake Hand Lever Assembly |
According to our records, Campaigns Administration has not received confirmation that the above referenced recall, dated June 11, 2020, has been completed. A copy of Recall R20AO is attached. Your buses affected by Recall R20AO are identified by Blue Bird body number and VIN under Section 2 on the enclosed cover sheet.
If this is the first time you received notification of Recall R20AO, please read the enclosed notification carefully. Recall R20AO must be completed, as soon as possible. To correct this potential issue, Blue Bird will notify owners by mail and provide the affected dealers and owners with the necessary remedy instructions to inspect and repair, as needed.
Blue Bird will reimburse the labor cost of the repairs related to this recall at no cost to the vehicle owner. The standard repair time (SRT) to accomplish these repairs in accordance with the R20AO remedy procedure(s) is outlined below.
Repair Options and allowable labor times for this campaign:
Blue Bird will reimburse the labor cost of potential repairs relating to this recall at no cost to you the vehicle owner. Repair Options and allowable labor times for this campaign:
- Repair A (Inspection):
- 0.1 (6 minutes)
- Repair B (Handle Adjustment โ As Needed)
- 0.1 (6 minutes)
- Repair C (Yoke Adjustment โ As Needed)
- 0.2 (12 minutes)
If you have already had R20AO performed on your affected buses, please complete and mail the enclosed recall yellow coversheet to us in the enclosed postage paid pink reply envelope so we may update our recall records. Be sure the reply sheet is filled out properly.
Questions regarding this recall campaign should be directed to lisa.hancock@blue-bird.com
Thank you for your prompt attention to this matter.
Sincerely,
Lisa Hancock
Corporate Recall Administrator
Blue Bird Corporation
402 Blue Bird Blvd, Fort Valley, Georgia 31030
Phone 478.822.2242 lisa.hancock@blue-bird.com
BLUE BIRD BODY COMPANY
3920 Arkwright Road, Suite 200, Macon, GA 31210 โ (478) 825-2021
R20AO
IMPORTANT SAFETY RECALL NOTICE
NHTSA Campaign Number: 20V-234 (School Bus)
NHTSA Campaign Number: 20V-235 (Non-School Bus)
DATE: | June 11, 2020 |
SUBJECT: | Recall R20AO, FMVSS 105 Noncompliance โ Hydraulic Brake Units W/Floor Mounted Park Brake Hand Lever Assembly |
Dear Blue Bird Owner:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
This important safety recall notice applies to your bus(es) identified by both Blue Bird Body Number and Vehicle Identification Number (VIN) on the enclosed yellow cover sheet. If you no longer own the subject bus(es), please complete the appropriate section of the yellow cover sheet and return to Blue Bird in the enclosed pink postage prepaid envelope.
Blue Bird Body Company is voluntarily recalling certain model year 2006 to 2021 Blue Bird Vision School Buses manufactured from September 24, 2005 through February 13, 2020; certain model year 2007 to 2013 All American School Buses manufactured from September 27, 2006 through June 15, 2012; and certain model year 2009 to 2019 Vision Non-School Buses manufactured on September 6, 2008 and March 12, 2018. On the subject buses, it has been determined that certain Blue Bird buses could fail to conform to the Federal Motor Vehicle Safety Standard Number 105 “Hydraulic and Electric Brake Systems” for the parking brake system requirements. Subject buses may fail to meet the FMVSS 105 S5.2.3 requirements for holding the vehicle stationary for 5 minutes on a 20% grade when loaded to its maximum gross vehicle weight. Blue Bird must conduct a recall to correct this noncompliance. The potentially suspect population includes buses equipped with hydraulic brakes with a hand lever mounted on the right side of the driver seat to actuate the parking brake (Feature 40049-03). Blue Bird shall conduct a voluntary safety recall to correct any potential noncompliance.
Blue Bird has evaluated the risk to motor vehicle safety related to this noncompliance and determined that there is a potential for injury to the occupant and bystanders in the event that the parking brake system is set to an insufficient application force. A parked bus that moves unexpectedly could increase the risk of injury and/or a crash. Therefore, the bus should be parked on a level surface and properly chock the wheels until the hand brake assembly has been inspected.
Corrective Action:
To correct this noncompliance, Blue Bird will notify the affected owners that the application force of the floor mounted park brake hand lever assembly must be inspected and set according to the Blue Bird Service Manual requirements.
Labor Reimbursement:
Blue Bird will reimburse the labor cost of potential repairs relating to this recall at no cost to you the vehicle owner. Repair Options and allowable labor times for this campaign:
- Repair A (Inspection):
- 0.1 (6 minutes)
- Repair B (Handle Adjustment โ As Needed)
- 0.1 (6 minutes)
- Repair C (Yoke Adjustment โ As Needed)
- 0.2 (12 minutes)
Administering the Recall:
Blue Bird recommends that you contact your local or nearest Blue Bird Dealer to arrange for this recall to be performed. The Dealer can perform the repairs, or arrange for repairs to be performed by a service repair facility authorized by the Dealer. However, you may elect to perform this recall yourself or pay another independent repair facility to perform this recall. A qualified technician should perform this recall. If you elect to perform this recall yourself or pay another independent repair facility to perform this recall, complete and submit the Pink Ownerโs Recall Reply Sheet provided. The Recall Reply Sheet includes a section for the owner to request reimbursement of the ownerโs labor or to request reimbursement for a labor invoice paid by the owner to an independent repair facility.
Parts to complete Recall R20AO are not required for this campaign.
Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
If the modifications directed by this notification were performed on your bus prior to the receipt of this recall notification, attach a copy of the work order/invoice. Mail the documents in the pink self-addressed postage prepaid envelope included with the pink reply sheet to Blue Bird for warranty consideration. Reimbursements will be made in accordance with the requirements of the National Highway Transportation Safety Act, Title 49 Code of Federal Regulations, Parts 573 and 577.
Please contact your local Blue Bird Dealer with any questions regarding this recall campaign.
If Blue Bird Body Company should fail to or is unable to remedy this condition without charge to you, you may contact:
ADMINISTRATOR
NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION
1200 NEW JERSEY AVENUE, SE
WASHINGTON, D.C. 20590
Or, you may call The National Highway Traffic Safety Administration toll free at:
1-888-327-4236 TTY 1-800-424-9153 or go to: http:/www.safercar.gov
BLUE BIRD BODY COMPANY
3920 Arkwright Road, Suite 200, Macon, GA 31210 โ (478) 825-2021
R20AO
IMPORTANT SAFETY RECALL NOTICE
NHTSA Campaign Number: 20V-234 (School Bus)
NHTSA Campaign Number: 20V-235 (Non-School Bus)
DATE: | June 11, 2020 |
TO: | U.S. DEALERS |
SUBJECT: | Recall R20AO, FMVSS 105 Noncompliance โ Hydraulic Brake Units W/Floor Mounted Park Brake Hand Lever Assembly |
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
This important safety recall notice applies to your buses identified by both Blue Bird Body Number and Vehicle Identification Number (VIN) on the attached yellow cover sheet.
Blue Bird Body Company is voluntarily recalling certain model year 2006 to 2021 Blue Bird Vision School Buses manufactured from September 24, 2005 through February 13, 2020; certain model year 2007 to 2013 All American School Buses manufactured from September 27, 2006 through June 15, 2012; and certain model year 2009 to 2019 Vision Non-School Buses manufactured on September 6, 2008 and March 12, 2018. On the subject buses, it has been determined that certain Blue Bird buses could fail to conform to the Federal Motor Vehicle Safety Standard Number 105 “Hydraulic and Electric Brake Systems” for the parking brake system requirements. Subject buses may fail to meet the FMVSS 105 S5.2.3 requirements for holding the vehicle stationary for 5 minutes on a 20% grade when loaded to its maximum gross vehicle weight. Blue Bird must conduct a recall to correct this noncompliance. The potentially suspect population includes buses equipped with hydraulic brakes with a hand lever mounted on the right side of the driver seat to actuate the parking brake (Feature 40049-03). Blue Bird shall conduct a voluntary safety recall to correct any potential noncompliance.
Blue Bird has evaluated the risk to motor vehicle safety related to this noncompliance and determined that there is a potential for injury to the occupant and bystanders in the event that the parking brake system is set to an insufficient application force. A parked bus that moves unexpectedly could increase the risk of injury and/or a crash. Therefore, the bus should be parked on a level surface and properly chock the wheels until the hand brake assembly has been inspected.
Corrective Action:
To correct this noncompliance, Blue Bird will notify the affected dealers and owners that the application force of the floor mounted park brake hand lever assembly must be inspected and set according to the Blue Bird Service Manual requirements, if found to be incorrect. Blue Bird will provide the affected dealers and owners with instructions regarding this recall remedy.
Labor Reimbursement:
Blue Bird will reimburse the labor cost of potential repairs relating to this recall at no cost to you the Dealer or to the vehicle owner. Repair Options and allowable labor times for this campaign:
- Repair A (Inspection):
- 0.1 (6 minutes)
- Repair B (Handle Adjustment โ As Needed)
- 0.1 (6 minutes)
- Repair C (Yoke Adjustment โ As Needed)
- 0.2 (12 minutes)
Parts to complete Recall R20AO are not required for this campaign. To assist with this recall remedy, Blue Bird will supply the Dealer with a Beslands SF-500 Digital Force Gauge Push and Pull Tester Dynamometer Pressure High Precision LCD Measuring Instrument Thrust Meter (2N-500N).
If Blue Birdโs records indicate bus(es) subject to this recall were delivered in your service area, a list of affected bus(es) will be enclosed. The bus(es) will be identified by Blue Bird Body Number and Vehicle Identification Number (VIN) on the enclosed yellow cover sheet. Dealers should verify correct owners and assure that complete mailing and shipping addresses are provided for each listed owner.
It is the Dealerโs responsibility to verify that the correct owner name, address, and telephone number is provided for each listed vehicle. Any corrections or updates should be made in ClaimsCenter. Addresses that cannot be updated should be forwarded to the Recall Administrator.
Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
Dealers are reminded of their responsibilities under Section 154 of The National Traffic and Motor Vehicle Safety Act of 1991. Dealers are required to complete modifications on units in their inventory before delivering to the final owner. Reference Blue Bird Body Company Distributor Memo No. 42-92.
If you have in your possession or have sold a bus that was purchased from another Dealer that may be affected by this recall, please notify Lisa Hancock at 478-822-2242 or lisa.hancock@blue-bird.com Questions regarding this recall campaign should be directed to Lisa Hancock, as well.
Sincerely,
Lisa Hancock
Corporate Recall Administrator
Blue Bird Corporation
402 Blue Bird Blvd, Fort Valley, Georgia 31030
Phone 478.822.2242 lisa.hancock@blue-bird.com
BLUE BIRD BODY COMPANY
3920 Arkwright Road, Suite 200, Macon, GA 31210 โ (478) 825-2021
11 Affected Products
Vehicle
MAKE | MODEL | YEAR |
BLUE BIRD | VISION | 2009-2019 |
10 Associated Documents
Non-Compliance Notice 573 Report
RCLRPT-20V235-4949.PDF 215.359KB
Manufacturer Notices(to Dealers,etc)
RCMN-20V235-3314.pdf 844.094KB
Remedy Instructions and TSB
RCRIT-20V235-8736.pdf 291.803KB
ISSUED Owner Notification Letter(Part 577)
RCONL-20V235-1548.pdf 802.952KB
Recall Acknowledgement
RCAK-20V235-6160.pdf 244.904KB
Recall Quarterly Report #1, 2020-2
RCLQRT-20V235-9239.PDF 211.148KB
Recall Quarterly Report #3, 2020-4
RCLQRT-20V235-6603.PDF 211.327KB
ISSUED Renotification Notice
RCRN-20V235-0475.pdf 1570.253KB
Recall Quarterly Report #2, 2020-3
RCLQRT-20V235-7262.PDF 211.241KB
Recall Quarterly Report #4, 2021-1
RCLQRT-20V235-0814.PDF 211.434KB
Latest Recalls Documents
- VEHICLE APPLICATIONS: 2013-1999 Chevrolet
Silverado 1500 Rear, 2013-1999 GMC
Sierra 1500 Rear, 2014-2000 Chevrolet
Tahoe Rear, 2014-2000 Chevrolet
Suburban 1500 Rear, 2009-2002 Chevrolet
Trailblazer Rear, 2014-2000 GMC
Yukon Rear
- Application Specific Materials: Element3 Brake Shoes are made with application-specific materials, ensuring the best performance and service life. Premium new steel facilitates proper shoe to drum contact
- Sheer Strength: We offer riveted and bonded brake shoes, delivering the highest possible shear strength and reduced noise and vibration.
- Premium Dipped Coating: A premium dipped coating on all Element3 brake shoes provide corrosion resistance for superior durability.
- Contour Or Cam Ground: Our brake shoes are either contour or cam ground depending on the application, ensuring the best contact between shoe and drum.
- Fitment:The Spring Parking Brake compatible with Polaris
RZR all models,Polaris
Ranger 800,Ranger 900 all models,Ranger 1000 all models,Polaris
Ranger Turbo,Polaris
Ranger Turbo S.
- Function:This spring parking brake is a new type of parking brake that keeps the vehicle stationary when not in use, designed to help prevent the vehicle from rolling away when parked. The parking brake is installed on the frame of the vehicle, which help to reduce damage to the vehicle and surrounding property. (Note : When parking on inclines, it is not suitable as the only braking system. Please take additional precautions and use large blocks or rocks behind the tires to prevent rolling)
- Feature:Made of high-quality metal, it greatly extends its service life, this spring parking brake thingy more sturdy and wear-resistant.
- Easy Install:Easy to install, save a lot of time and money. Tip: Do not excessively bend the spring before installation, as this can maximize the service life of the product's spring brake.
- Package:1 pcs Spring Parking Brake
- Compatible With: The Polaris
Parking Brake compatible with Polaris
RZR all models, Polaris
Ranger 800, Polaris
Ranger Turbo, Polaris
Ranger Turbo S, Polaris
Ranger 900 all models, Polaris
Ranger 1000 all models
- Product Function: The Polaris
Spring Brake will help when you're parked on th hill or riding on the trailer or anything like that, it'll keep your transmission from popping out of gear ,save you lots of money and costly repairs. NOTE๏ผIt is not designed to be used as sole brake system while parked on inclines, always use extra precaution and use large blocks or rocks behind your tires to prevent rolling
- High Quality: The Polaris
parking brake kit made of high-quality materials, In particular, spring after quenching process, longer service life
- Easy Installation: Remoe the bottom two nuts,install your parking brake reinstall the nuts that's all, very simple operation you just apply your brake and slide the block over with your left foot
- NOTE: Do not over flex the spring prior to install,this can maximize the service life of your product spring brake.Our products have a 10-year warranty, any questions feel free to email us
- Ideal solution - this loaded brake backing plate comes preassembled with the components required to make a complete parking brake repair
- Time saver - eliminates frustrating, unpredictable work required to replace individual corroded components
- Direct replacement - engineered and manufactured to match the fit and function of the original parts
- Application specific - designed for specified vehicles and wheel positions
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- Manufacturer Part# 1911785 1911594.
- Fitment: Fit for Polaris
UTV as Follows โถ Ranger 500 2010 โถ Ranger 800 2010-2014 Exclude 6x6, Mid-size Edition โถ Ranger 800 Crew 2010-2014 Exclude 6x6, Mid-size Edition
- Feature๏ผOEM specifications. Parking Brake Caliper is made of high-quality materials, it is not easily deformed and has a long service life.
- Package๏ผParking Brake Caliper ร 1.
- Service: If there is any product problem within 1 year, please contact us to solve it for you.We provide product service.
- VEHICLE APPLICATIONS: 2018-2003 Toyota
4Runner Rear, 2007-2001 Toyota
Sequoia Rear, 2014-2007 Toyota
FJ Cruiser Rear, 2018-2010 Lexus
GX460 Rear, 2009-2003 Lexus
GX470 Rear
- PREMIUM GRADE: Raybestos
R-Line Brake Hardware offers quality replacement brake parts for everyday driving conditions in cars, light trucks and SUVs
- OE SPECIFICATIONS: Highly durable and matches OE form, fit and function to meet all the high standards set by the industry
- SUPERIOR DURABILITY: Engineered with high-quality materials to increase durability for safe, quiet and reliable brake operation
- RIGOROUSLY TESTED: Tested under a variety of extreme and unusual conditions to ensure high quality and dependability for reliable braking performance
- Precision engineered OE style design ensures proper fit for a no hassle installation
- 100 percent asbestos-free friction formulations for extended wear, consistent braking performance and long life
- 100 percent all-new steel provides durable construction for long life
- Rust inhibitive coating prevents rust and extends durability
- Set includes brake shoes for 1 axle (2 wheels); Bonded construction; Hardware kit not included
- 100% copper free.Material:copper
- Precision cam ground for exact fitment
- Secondary post cure for fast break in
- 100% asbestos free
- Chamfers to assure noise-free braking
- 100% copper free
- Precision cam ground for exact fitment
- Secondary post cure for fast break in
- 100% asbestos free
- Chamfers to assure noise-free braking
- ใFitmentใFit for Polaris UTV โถ Ranger 500 2005-2010 โถ Ranger 700 2005-2009 โถ Ranger 800 2010-2017 โถ Ranger 900 Diesel 2011-2014 โถ Ranger EV 2010-2022
- ใFeatureใThis parking brake pads are made by ceramic, which is high temperature resistance and faster heat dissipation speed. No metal noise generated, extending the service life of brake discs.
- ใOEM#ใ2203148 2203147.
- ใPackageใ1 x Parking Brake Pads Set, 2 x Spring, 1 x Wash Thick, 8 x Wash Thin.
- ใServiceใJAVIK offer 24 hours customer service and 1 year warran_ty. Please feel free to message if you meet any problem.
Last update on 2025-04-15 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.