INTEGRAL Disc Brake Axles With C88 Spindle

“This site contains affiliate links for which OEMDTC may be compensated”

NHTSA ID Number: 10056017

Manufacturer Communication Number: SB-10059-OM

Summary

SAF-HOLLAND: INFORMATION REGARDING CHANGES IN SERVICE MANUAL ON INTEGRAL DISC BRAKE AXLES AND NOTIFICATION OF INSPECTIONS. *PE

1 Affected Product

Equipment

SAF-HOLLAND

INTEGRAL DISC BRAKE AXLES

Service Bulletin

INTEGRAL^™ Disc Brake Axles with C88 Spindle

Change in Inspection Interval Notification

April 2014

In order to maintain optimum performance of your INTEGRAL^™ disc brake axle, SAF-HOLLAND^® has determined that changes MUST be made to the existing routine service intervals outlined in Section 12 of the SAF^® Service Manual XL-SA10059OM-en-US Rev B.

Visual and Safety Inspections should be performed as called for in Table 1 below. Where time and milage intervals are listed, the inspection should be performed at whichever interval is reached first. Adherence to these inspection intervals will minimize wheel end components that have experienced abnormal wear being left in service.

Failure to inspect and maintain your SAF-HOLLAND^® INTEGRAL^™ disc brake axle as outlined in this Service Bulletin could result in brake or wheel bearing failure which, if not avoided, could result in death or serious injury.

This change is effective immediately and will be reflected in SAF^® Service Manual XL-SA10059OM-en-US Rev C. Please retain this publication as it serves as an update to your current SAF^® Service Manual XL-SA10059OM-en-US Rev B.

NOTE: If replacement parts are needed for your INTEGRAL^™ disc brake axle, SAF-HOLLAND^® Original Parts MUST be used to maintain designed component performance.

NOTE: For complete instructions on your INTEGRAL^™ disc brake axle, see SAF-HOLLAND^® Service Manual XL-SA10059OM-en-US on the internet at www.safholland.us.

Table 1

WHICHEVER OCCURS FIRST				PERIODIC CHECKS
	MILEAGE INTERVALS	After First 3,000 Miles	Daily	Every 20,000 Miles	Every 50,000 Miles
	TIME INTERVALS	After First Month	Daily	Every 3 Months	Every 6 Months
VISUAL AND SAFETY INSPECTION
Inspect for Missing, or Loose, Hub Cap			•
Inspect for Grease Leakage Around Hub Cap			•
Hub Unit Maintenance-free. Check for grease leaks. Refer to Service Manual XL-SA10059OM-en-US Section 8.				•
Inspect the brake caliper guide system. Check for free movement and sliding action. Refer to Service Manual XL-SA10059OM-en-US Section 5.C.					•
Check rubber dust covers for cracks and damage. Check adjuster cap for correct seating. Refer to Service Manual XL-SA10059OM-en-US Section 5.C.					•
Inspect brake pad thickness regularly. Refer to Service Manual XL-SA10059OM-en-US Section 5.				•
Inspect brake rotors for cracks. Refer to Service Manual XL-SA10059OM-en-US Section 5.					•
Perform general service / maintenance inspection. Refer to Service Manual XL-SA10059OM-en-US Section 4.		•			•
Perform disc brake / hub unit inspection. Refer to Service Manual XL-SA10059OM-en-US Section 5.		•			•
Perform wheel rock and wheel noise tests. Refer to Service Manual XL-SA10059OM-en-US Section 6 and 7.				•

MECHANICAL CHECK

Attention: Check torque of wheel nuts after the first 5-100 miles (8-160 km) from date vehicle was placed into service and after every wheel removal. Continually check wheel torque every 10,000 miles (16,000 km), or at the intervals indicated in your vehicle owner’s manual, whichever occurs first.

SPECIAL SERVICE CONDITIONS
Vehicles with long standing periods.	Service at specified time intervals, e.g. trailer used for storage or frequently left standing for several days at a time.
Vehicles used under severe duty and extreme conditions.	Service at suitably reduced intervals, e.g. trailer operating in continuous multi-shifts or in off-road construction sites.

XL-SA20001SB-en-US Rev B · 2014-04-17

SB-10059-OM

https://www.nhtsa.gov/recalls?nhtsaId=10056017

https://static.nhtsa.gov/odi/tsbs/2014/SB-10056017-9010.pdf

Taking too long?

Reload document

Open in new tab

Download [146.23 KB]

Bestseller No. 1

VEVOR Electric Trailer Brake Assembly, 12" x 2", 2 Pairs Self-Adjusting Electric Brakes Kit for 7000 lbs Axle, 5-Hole Mounting, Backing Plates for Braking System Part Replacement (2 Right + 2 Left)

Self-Adjusting Electric Brake: Say goodbye to manual adjustments! Dive into the world of 12" x 2" electric trailer brake assemblies that self-adjust. It's not just smart; it's efficient and gives your trailer that smooth braking touch.
Hassle-Free Installation: DIY's best friend! Our electric trailer brake is straightforward and a breeze to install. It's ready to install right out of the box and boasts high compatibility. Wherever you are, installation is just a few steps away.
Built for the Long Haul: Keep on rolling! With a lifespan of up to 30,000 kilometers, these trailer brakes are in it for the long haul, designed for your trailer's daily adventures. Constructed from premium materials, our brakes promise robust durability and resistance to wear and tear.
Versatility at Its Best: The trailer brake kit has a broad range of applications, including towing trailers, transporting goods, camping trips, and more. It's compatible with Dexter, AL-KO (a brand under the former), and other trailer axles.
Top-Notch Packaging: When it comes to packaging, we don't just box; we care. Our trailer electric brake kit is packaged above industry standards. Every brake is meticulously checked and wrapped to ensure what you get is nothing short of perfect.

Bestseller No. 2

Trailer Axle Electric Brake Kit, Pair of 5-Hole, 4.5" Bolt Circle Brake Drum with 10" x 2 1/4" Self-Adjusting Electric Brakes for 3500 lb Axles, Replacement 10” Brake Hub Drum Assembly

Premium Material: This brake drum is made of high-quality iron and uses electroplating technology to protect the drum body, enabling it to work normally in various environments. At the same time, the brake drum is resistant to rust and corrosion, greatly extending the service life of the product.
About The Drum and Self-Adjusting Electric Brakes: Classic design and rich production experience make the brake drum more excellent response, in a variety of harsh environments can achieve a short period of emergency braking, so that your journey is safer. It’s designed for 3500 lb Axles.
Package Including: 2*brake drum 5 hole, 4.5" bolt, 2*Bearing inner ring replace for L68149( I.D:1.377", O.D:2.164"), 2*Bearing inner ring replace for L44649(I.D:1.062", O.D:2.058"), 2*grease seal(I.D: 1.718" O.D: 2.56" height: 0.5" ), 2*dust cover(Mounting diameter:1.988"), 2*rubber plug dust cover(Mounting diameter:1.988"), 10*hub nut, 1*left electric brake, 1*right electric brake, 8*spring washer, 8*nut(7/16-20UNF), 2* hexagon slotted nut, 2*flat washer, 2* cotter pin.
Suit for: Pair of trailer 5 on 4.5" hub drum kits and 10" x 2 1/4" electric adjusting brakes fit for Dexter and other brands 3500lbs trailer axle. Fits 1-1/16'' to 1-3/8'' spindles 3,500 pounds trailer. Not fit for 1-1/16" Straight spindle and 1" Straight spindle.
After Sale Service: High quality assurance! And we provide after-sales service policy. If you have any problems, please contact us first, we will try our best to solve your problem.

Bestseller No. 3

eCustomhitch Electric Trailer Brake Assembly, 12" x 2", 2 Pairs Kit for 7000 lbs. Axle, 5-Hole Mounting Backing Plates for Braking System Part Replacement (2 Right + 2 Left) Fits Dexter and Most Axles

Dexter Style Backing Plate
Axle Size - 5200-7000lb
Brake Flange - 5 Bolt
Fits Spindle - #42
Fits 6 or 8 Lug Applications

Bestseller No. 4

AEagle 12" x 2" Electric Trailer Brake for 5,200lbs 6,000lbs 7,000lbs Left and Right, 4Pcs

⭐ Compatible with: Fit for Dexter/ for Al-Ko/ for Lippert and other brands 5,200 lbs, 6,000 lbs, and 7,000 lbs trailer axles.
⭐Kit Includes: 2* 12" x 2" left electric brake, 2* 12" x 2" right electric brake
⭐Production and Installation: Strictly follow automotive standards and comply with the G3000 standard in the US; Easy to install
⭐Product Introduction: The AEagle electronic brake features non-asbestos brake linings for superior friction performance, ensuring longevity and enhanced braking capabilities.
🔧Quality Assurance: 12-month warranty! Tested before shipping.

Bestseller No. 5

JADODE Trailer Electric Brake Assembly 10" x 2-1/4" for 3500 lbs Heavy Duty Axle Trailr 10" x 2.25" One Pair

10" x 2.25"electric trailer brake assembly (left & right side), fit most 3500lbs - 4000lbs trailer axle; 4-hole mount w/mounting bolt
Fits the wheel bolt pattern 4 lug,fits spline size #84 steel drum; center hole diameter: 3" ; bolt circle diameter: 4"
Replace 023-026-00 and 023-027-00；77-10-2；23-105, 23-106，296649；replace Dexter Lippert Al-Ko,etc brake assemblies
The electric brakes are NOT self adjusting, unlike most drum brakes on cars and trucks,need to be done when installed and periodically thereafter.If you cannot adjust yourself, please find a professional adjustment
JADODE electric and hydraulic trailer brake parts Making it an Ideal Choice for Travelers Seeking a Hassle-Free Power Solution

Bestseller No. 6

AEagle 2Pcs 10" x 2-1/4" Electric Trailer Brake Assemblies for 3,500lbs, Left and Right

Compatible with: Fit For Alko/ for Dexter/ for Quality, and other brands 3,500lbs trailer axle
Kit Includes: 1x 10" x 2.25" left electric brake assemblies, 1x 10" x 2.25" right electric brake assemblies, 8x spring pad, 8x nut
Production and Installation: Strictly follow automotive standards and comply with the G3000 standard in the US; Easy to install
Product Introduction: The AEagle electronic brake features non-asbestos brake linings for superior friction performance, ensuring longevity and enhanced braking capabilities.
Quality Assurance: 12-month warranty! Tested before shipping.

Bestseller No. 7

SEHNSUCHT Trailer Electric Brakes, 2 Pair of 4 Hole Mounting Electric Brake Assembly 10" X 2-1/4" for 3,500 lbs Axle-(Set 4: 2 Left+2 Right)

Electric Brakes: Classic design and rich production experience make the brake drum and electric brake more excellent response, in a variety of harsh environments can achieve a short period of emergency braking, so that your journey is safer.
Fit for: 2 pair of 10" X 2-1/4" electric brake fit for Dexter and other brands 3500lbs trailer axle.
Note: Bolt on application to standard 4-hole pattern ***BOLTS NOT INCLUDED***
Package Including: 2*10” Left Electric Brake, 2* 10” Right Electric Brake, 16* Spring washer, 16*nut.
After Sale Service: High quality assurance! And we provide after-sales service policy. If you have any problems, please contact us first, we will try our best to solve your problem.

Bestseller No. 8

JADODE Electric Trailer Brake Assembly 12" x 2" fits 7000 lbs Axle Trailers,Electric and Hydraulic Brake for One Pair- 23-108-00/23-181-00 Trailer Brakes

Set of two 12" x 2" electric trailer brake assembly, for most 5200lbs 6000lbs 7000lbs trailer axle；Center hole diameter: 3-1/4"
7000 lb trailer brakes fits the wheel bolt pattern 6 lug or 8 lug,fits spline size #42 steel brake drum.Bolt hole spacing: 2.0" O.C. around the top,Bolt hole spacing: 3.0" O.C.across the bottom
Replace ：K23-180-00，K23-181-00；77-12EA-1-2；replace Axletech B12E-22 (12x2)；Al-Ko Lippert,etc
The trailer brakes are NOT self adjusting, unlike most drum brakes on cars and trucks,need to be done when installed and periodically thereafter.If you cannot adjust yourself, please find a professional adjustment
JADODE electric and hydraulic making it an ideal choice for travelers seeking a hassle-free power solution

Bestseller No. 9

LIBRA 10" x 2-1/4" Trailer Electric Brake Assembly 2 Pairs (2 Left and 2 Right)

Premium LIBRA brand OE 10" x 2-1/4" electric trailer brake assemblies (2 left + 2 right) for two axles
works with most 3,500 lbs trailer axles in the market
Center Hole Diameter: 3", 4 holes mounting, bolt circle diameter: 4", mounting bolts installed, no nuts included
Exchange with Dexter brake # 023-026-00/023-027-00

SaleBestseller No. 10

Southwest Wheel 3,500 lbs. Trailer Axle Self Adjusting Electric Brake Kit 5-4.5" Bolt Circle

Pair of 10" x 2 1/4" 5-4.5" bolt circle TruRyde hub and drums with parts (2 5/8" from center of one stud to the center of the next stud)
Pair of 10" x 2 1/4" TruRyde Self-Adjusting electric backing plates
Works with Al-Ko, Dexter, Lippert, and Quality Trailer Axles. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.
Comes with TruRyde bearings, seals, lug nuts, open and closed grease caps, cotter pins, spindle washers, tang washers, spindle nuts, and brake mounting washers and nuts
Built for 84 spindles with a 4 hole brake flange (inner bearing L68149, outer bearing L44649)