VVK0007 – Improper Lamps and Missing Reflectors/FMVSS 108 – 2016-2020 Vac-Tron CS870GT, CS873GT, LP Mini 373 DT, & LP Mini 373 GT Vacuum Excavator Trailers

May 20, 2020 NHTSA CAMPAIGN NUMBER: 20V288000

Improper Lamps and Missing Reflectors/FMVSS 108

Due to the improper position of the lamps, insufficient reflective tape, and lack of reflectors, the vacuum excavator trailer may have reduced visibility, increasing the risk of a crash.

 

NHTSA Campaign Number: 20V288

Manufacturer Vac-Tron Equipment, LLC

Components EXTERIOR LIGHTING

Potential Number of Units Affected 150

 

Summary

Vac-Tron Equipment, LLC. (Vac-Tron), a subsidiary of Vermeer Manufacturing Company (Vermeer), is recalling certain 2016-2020 CS870GT, CS873GT, LP Mini 373 DT, and LP Mini 373 GT Vacuum Excavator trailers. The front clearance lamps may be positioned improperly and an insufficient amount of conspicuity tape may have been applied on the sides and rear. The trailers may also may also lack side or rear reflex reflectors. As such, these vehicles fail to comply with Federal Motor Vehicle Safety Standard Number 108, “Lamps, Reflective Devices, and Associated Equipment.”

 

Remedy

Vac-Tron will notify owners, and Vermeer dealers will install remedy kits provided by Vac-Tron, free of charge. This recall began July 14, 2020. Owners may contact Vac-Tron customer service at 1-352-728-2222. Vac-Tron’s number for this recall is VVK0007.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

---

Vac-Tron Equipment, LLC

Trenchless
Okahumpka, FL  34762 USA

 

FIELD CAMPAIGN

SERVICE BULLETIN # SVV2020010

DATE: 30 June 2020

CAMPAIGN TYPE:	Mandatory-Product Safety
CAMPAIGN CATEGORY:	Kit and Bulletin

 

MACHINE / ATTACHMENT MODEL (S) :	Serial Numbers
	Included	Excluded	Kit Version
CS870GT	See attached listing on pages 4–5 of this Bulletin for specific VIN and Serial/Unit numbers.	N/A	VVK01
CSGT
CS873GT
LP303GT
LP370XDT
LP373GT
LP373SGT
LP373XDT
LPMINI
LPMINISK
LPMINIXDT
LP303GT	See attached listing on page 5 of this Bulletin for specific VIN and Serial/Unit numbers.	N/A	VVK02
LP303XDT
LP373GT
LP373SGT

 

Subject:

PRODUCT SAFETY RECALL FIRST NOTICE

 

Light Relocation, Reflector and Conspicuity Tape Installation Kit
(VVK00-0007)

Background:

INADEQUATE LIGHTING, REFLECTORS AND CONSPICUTITY TAPE

The lighting, side and rear reflectors and conspicuity tape do not meet US or Canada Federal Motor Vehicle Safety Standard (FMVSS/CMVSS) governmental regulation 108 for the Unites States, Canada and Mexico.

 

DEATH OR SERIOUS INJURY POSSIBLE

When towing or parking the vacuum excavator on public roadways, a crash may occur resulting in death or serious injury resulting from a driver(s) of other vehicle(s) not seeing the vacuum excavator at night or during limited sunlight and strike the vacuum excavator. To reduce the potential of this occurring, vehicle lights will be relocated, additional reflectors and conspicuity tape are being added.

Property or equipment damage may also occur.

 

Solution:

IMMEDIATE MACHINE MODIFICATIONS REQUIRED

VVK00-0007 has been created to provide the necessary parts and instructions to relocate the vehicle lights, add reflex reflectors to the front, side and rear, add conspicuity tape to the sides and rear. This kit must be installed as soon as possible.

Please be reminded that it is a violation of Federal law for you to sell or lease the machines covered by this notification until this recall has been performed on these machines. Substantial civil penalties apply to violations of this law.

 

DEALER PARTICIPATION

REVIEW REPORT, ORDER KITS, CONTACT CUSTOMERS

1. Reports will be emailed during the week of June 30, 2020, to dealerships shown in our records which have units in their territory affected by this Alert. Please review the report for accuracy, including owner and/or address changes.

If the information contained in the report is NOT correct, please notify the Product Safety Department on or before July 13, 2020x at:

Telephone: 641-621-7060
Fax: 641-621-8562
Email: productsafety@vermeer.com

 

2. Dealerships Order Kits by calling Vac-Tron at 888-822-8766.

Each dealership should determine the quantity of Kits to order initially depending upon the number of units that may be available for immediate upgrade. Do not order more Kits than needed for immediate installation.

 

3. Contact your affected customer(s) to schedule a mutually acceptable time to upgrade their machine. Note: Letters will be sent to the customer(s) on or about July 14, 2020. Also refer to Owner Notification section below.

If you have any questions concerning the installation of VVK00-0007, please contact the Vac-Tron Service Department. Vermeer Corporation is assisting Vac-Tron with the administration of this campaign.

 

REIMBURSEMENT

Upon completion of each Kit installation, a campaign Warranty Claim must be submitted to the Vermeer Corporation Warranty Department for reimbursement of the parts cost and labor of the Kit.

This kit will reimburse labor hours as follows:

• VVK01: 3 hours
• VVK02: 3 hours

 

Note: Future notices to dealers and owners are dependent upon the receipt of Warranty Claim.

 

OWNER NOTIFICATION

Sample Letter: Included at the end of this Bulletin is a sample letter which will be sent by Vermeer Corporation directly to the Owners on or about July 14, 2020, via USPS certified/registered mail. Owner registrations indicate no translations are required for this campaign. The owner letter will be available in English only.

This owner notification/letter instructs the owner to contact their local dealership to arrange for a time to have the Kit installed. After receiving VVK00-0007 from Vac-Tron, you must contact your affected customer(s) immediately and schedule a mutually acceptable time to upgrade their machine.

We regret any inconvenience these corrective measures may cause you. This required work is for safety of the safety of the towing vehicle driver and occupants as well as other traveling on public roadways or in the immediate are while being towed. We hope you agree the safety benefits surpass the inconvenience.

 

VAC-TRON EQUIPMENT, INC.

Attachment:

VVK00-0007 Kit Instructions

 

---

---

NHTSA SAFETY RECALL NUMBER 20V-288

IMPORTANT SAFETY RECALL First Notice Light Relocation, Reflector and Conspicuity Tape Installation Kit (VVK00-0007)

 

Model: «Model» This notice applies to your vehicle, Serial No: «PRD_SRL» Unit No: «PART_SRL»

 

July 14, 2020

VIA USPS CERTIFIED/REGISTERED MAIL

 

Dear «MODEL» Owner:

This notice is sent to you in accordance with the requirements of the U.S. National Traffic and Motor Vehicle Safety Act.

 

Vermeer has decided that a defect, that relates to motor vehicle safety, exists in certain model year 2016–2020 Vermeer «MODEL» vacuum excavator trailers.

 

INADEQUATE LIGHTING, REFLECTORS AND CONSPICUTITY TAPE

The lighting, side and rear reflectors and conspicuity tape do not meet US or Canada Federal Motor Vehicle Safety Standard (FMVSS/CMVSS) governmental regulation 108 for the United States, Canada and Mexico.

 

DEATH OR SERIOUS INJURY POSSIBLE

When towing or parking the vacuum excavator on public roadways, a crash may occur resulting in death or serious injury resulting from a driver(s) of other vehicle(s) not seeing the vacuum excavator at night or during limited sunlight and strike the vacuum excavator. To reduce the potential of this occurring, vehicle lights will be relocated, additional reflectors and conspicuity tape are being added. Property or equipment damage may also occur.

 

IMMEDIATE MACHINE MODIFICATIONS REQUIRED

VVK00-0007 has been created to provide the necessary parts and instructions to relocate the vehicle lights, add reflex reflectors and add conspicuity tape to the sides and rear. This kit must be installed as soon as possible.

Please contact your authorized, independent Vermeer dealer immediately to arrange a mutually acceptable time and location to install VVK00-007 at no cost to you for labor or materials. The installation of each kit is estimated at 3 hours of labor.  If the Vermeer dealer travels to the unit to install the kit, costs may be incurred by the owner. You must have your machine upgraded for these safety features.

 

Contact your local Vermeer Dealer: «Service_Dealer_Name» «Serv_Dealer_Add1» «Serv_Dealer_Add2» «Serv_Dealer_City» «Serv_Dealer_St» «Serv_Dealer_Zip» «SERV_DEALER_COUNTRY» Telephone:  «Serv_Dealer_Phone»

 

According to our records, you currently own a Vermeer «MODEL» vacuum excavator trailer. The Model and Serial Number of the «MODEL» is shown at the top right of this letter.  If you no longer own this unit, please notify the Product Safety Department at:

Toll Free: 800-829-0051, extension 7060
Telephone: 641-621-7060
E-mail: productsafety@vermeer.com

If possible, please provide the name and address of the new owner. Vermeer Corporation is assisting Vac-Tron with the administration of this campaign.

 

We regret any inconvenience these corrective measures may cause you. This required work is for safety of the safety of the towing vehicle driver and occupants as well as other traveling on public roadways or in the immediate are while being towed. We hope you agree the safety benefits surpass the inconvenience.

 

Very truly yours,

VAC-TRON EQUIPMENT, LLC

 

Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten (10) days.

 

If the authorized dealer has failed or is unable to remedy the defect without charge and within a reasonable time, contact Vermeer Product Safety by email at productsafety@vermeer.com or by calling 800-829-0051 or 641-621-7060. You may also submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, D.C. 20590 or call the Vehicle Safety Hotline at 888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov

SVV2020-010

30 June 2020

 

---

Vac-Tron Equipment, LLC

Trenchless
Okahumpka, FL 34762 USA

 

FIELD CAMPAIGN KIT      VVK00-0007

DATE: 30 June 2020

For Dealer Reference: Service Bulletin #  SVV2020010

Light Relocation, Reflector and Conspicuity Tape Installation Kit

CAMPAIGN TYPE:	Mandatory-Product Safety
CAMPAIGN CATEGORY:	Kit and Bulletin

 

MACHINE / ATTACHMENT MODEL (S) :	Serial Numbers
	Included	Excluded	Kit Version
CS870GT	See attached listing on pages 13–14 of this Kit Instructions for specific VIN and Serial/Unit numbers.	N/A	VVK01
CSGT
CS873GT
LP303GT
LP370XDT
LP373GT
LP373SGT
LP373XDT
LPMINI
LPMINISK
LPMINIXDT
LP303GT	See attached listing on page 14 of this Bulletin for specific VIN and Serial/Unit numbers.	N/A	VVK02
LP303XDT
LP373GT
LP373SGT

 

PRODUCT SAFETY ALERT

PURPOSE: INADEQUATE LIGHTING, REFLECTORS AND CONSPICUTITY TAPE

The lighting, side and rear reflectors and conspicuity tape do not meet US or Canada Federal Motor Vehicle Safety Standard (FMVSS/CMVSS) governmental regulation 108 for the United States, Canada and Mexico. When towing or parking the vacuum excavator on public roadways, a crash may occur resulting in death or serious injury resulting from a driver(s) of other vehicle(s) not seeing the vacuum excavator at night or during limited sunlight and strike the vacuum excavator. To reduce the potential of this occurring, vehicle lights will be relocated, additional reflectors and conspicuity tape are being added.  Property or equipment damage may also occur.

 

Shutdown Procedure (LP Mini)

STOPPING THE MACHINE

For your safety and the safety of others, follow shutdown procedure before working on the machine for any reason, including servicing, maintaining, cleaning, inspecting, unclogging or transporting machine, or as otherwise directed in Operator’s manual.

 

Step 1: Make sure end of vacuum hose is clear of all spoils, debris, and other materials.

 

Step 2: Turn Water Pump Switch to OFF.

 

Step 3: Push Throttle Switch to SLOW. Idle engine five minutes to  allow vacuum pump to cool down. This helps to prevent the buildup of condensation.

 

Step 4: Turn Keyswitch to OFF to shut off engine.  Remove the key.

 

Step 5: Pull trigger on any high-pressure water tool to relieve line pressure.

 

Step 6: Disassemble all water line connections, vacuum hoses, and tools.  Stow properly on machine.

 

Step 7: Drain CVS Filter Housing / Cyclone.

 

Shutdown Procedure (CS Units)

STOPPING THE MACHINE

For your safety and the safety of others, follow shutdown procedure before working on the machine for any reason, including servicing, maintaining, cleaning, inspecting, unclogging or transporting machine, or as otherwise directed in Operator’s manual.

 

Step 1: Make sure end of vacuum hose is clear of all spoils, debris, and other materials.

 

Step 2: Push Throttle Control left several times to slow engine.  Idle engine five minutes to allow vacuum pump (with Reverse Flow Lever – Neutral) to cool down.  This helps to prevent the buildup of condensation.

 

Step 3: Turn Keyswitch OFF to shut down engine.

 

Step 4: Drain Filter Housing.

 

PROCEDURE 1:

 

1. Align the bracket with the edge of the curb side I-beam as shown below. Ref. 1, Fig 1.

 

2. Mark the light bracket hole locations onto the I-beam and drill (2) Ø9/32” (7.15 mm) holes through the I-beam.

 

3. Attach the marker light bracket with the supplied hardware. Ref. 1, 2, 3, and 4, Fig. 1.

 

4. Connect one end of the 100” (2.54 m) length of dual core wire to the front side marker lamp using the butt connectors. 5 and 6, Fig. 1.

 

5. Place loom over wires for protection. Ref. 8, Fig. 1.
6. Run the wire through the cross member and inside of the I-Beam to connect with the front clearance marker lamp. Reference step 3, Procedure 2 for connecting the front side marker lamp and front clearance marker lamp.

 

7. Use supplied zip ties to fasten wire harness to trailer frame.
8. Complete all steps for the street side of the trailer.

 

 

PROCEDURE 2:

1. Remove the curb side marker light from the platform gusset and disconnect the wires. For units with LED marker lights shown in Figure A, retain the marker light for future installation.  The marker lights from units with incandescent lights as shown in Figure B may be discarded.

 

2. Place the front clearance marker bracket on the gusset approximately 1-1/2” (3.81 cm) from the bottom as shown in Figure C. If the location of the antifreeze tank stand interferes with positioning the bracket properly, position the marker bracket just below the antifreeze tank stand as shown if Figure D.  Mark the bolt locations on the gusset and drill (2) Ø9/32” (Ø7.15 mm) holes. (Curb side shown). Ref. 1

 

3. Use the 1 ft (30.48 cm) length of dual core conductor wire to reconnect the front clearance marker lamp and tie in with the 100” (2.54 m) length wire from the front side marker lamp. Use the 12-10 (yellow) and 16-14 (blue) heat seal butt connectors to connect all wires according to diagram below.

 

4. Insert the front clearance marker lamp into the front clearance marker bracket as shown. Ref A, Fig. 2 for VVK01. Ref 2, Fig 2 for VVK02.  Refer to the illustration below for proper lamp orientation.
5. Attach the front clearance marker bracket with the hardware Ref. 3, 4, and 5 Fig. 2.
6. Loom all exposed wires. Ref. 8 Fig. 2.
7. Repeat all steps to connect the front clearance marker lamp on the street side of the trailer.

 

PROCEDURE 3:

1. Clean area where the conspicuity tape will be installed with light soap and water. Areas with damaged paint or heavy corrosion should be prepped, painted, and thoroughly dry before applying conspicuity tape.
2. Refer to the illustration and install the conspicuity tape in the locations shown. Ref. 1 and 2, Fig. 3.

 

3. Repeat for the opposite side of the trailer.

 

PROCEDURE 4:

1. Remove the existing rear corner/side clearance marker lamp from the gusset and disconnect the wires. For units with LED marker lights as shown in Figure A, retain the light for future installation.  The incandescent lights as shown in Figure B may be discarded.

 

2. Place the rear corner/side clearance marker bracket on the support approximately 1-1/2” (3.81 cm) from the bottom as indicated in the illustration below. Mark the bolt locations on the support and drill (2) Ø9/32” (Ø7.15 mm) holes.
3. Use the 1 ft (30.48 cm) length of dual core conductor wire to reconnect the rear corner/side clearance marker lamp using 16-14 butt connectors. Ref A, 7 and 8, Fig 4 for VVK01.  2, 7, and 8, Fig. 4 for VVK02.

 

4. Attach the rear corner/side clearance marker bracket to the fender support with the hardware as shown Ref. 3, 4, and 5 Fig. 4.
5. Loom all exposed wires. Ref. 9 Fig. 4.
6. Insert the rear corner/side clearance marker lamp into the bracket as shown Ref 1 and A, Fig. 4.
7. Clean area where the rear side marker reflectors will be installed with light soap and water. Areas with damaged paint or heavy corrosion should be prepped, painted, and thoroughly dry before applying the reflectors as shown.

 

8. Install the rear side marker reflector below the side marker bracket as shown.
9. Repeat all steps for the opposite side of the trailer.

 

PROCEDURE 5:

1. Clean area where the conspicuity tape will be installed with light soap and water. Areas with damaged paint or heavy corrosion should be prepped, painted, and thoroughly dry before applying the conspicuity tape.
2. Refer to the illustration and install each of the white conspicuity tape on the debris tank door and water tanks as shown Ref 1, Fig. 5.

 

---

---

 

FIGURE 1 Parts List
REF. NO.	PART NO.	DESCRIPTION	VVK01 QTY.	VVK02 QTY.
1	B134-5749	FRONT SIDE MARKER LAMP BRACKET WITH REFLECTOR	2	2
2	P-1473	1/4-20 X 1 HEX HEAD BOLT	4	4
3	P-1472	1/4 ID FLAT WASHER	4	4
4	P-2782	1/4-20 NYLON LOCKNUT	4	4
5	P-1054	100” (2.54 m) LENGTH DUAL CORE CONDUCTOR WIRE	2	2
6	P-2369	16-14 HEAT SEAL BUTT CONNECTOR BLUE	4	4
7	P-1301	ZIP TIE	15	15
8	P-2762	1/2″ SPLIT WIRE LOOM, 100” (2.54 m) LENGTH	2	2

 

		FIGURE 2 Parts List
REF. NO.	PART NO.	DESCRIPTION	VVK01 QTY.	VVK02 QTY.
1	B134-5748	FRONT CLEARANCE MARKER LAMP BRACKET	2	2
A	P-4190	FRONT CLEARANCE MARKER LAMP (EXISTING ON TRAILER)	2	0
2	P-4190	FRONT CLEARANCE MARKER LAMP	0	2
3	P-1473	1/4-20 X 1 HEX HEAD BOLT	4	4
4	P-1472	1/4 ID FLAT WASHER	4	4
5	P-2782	1/4-20 NYLON LOCKNUT	4	4
6	P-1054	1’ (30.48 cm) LENGTH DUAL CORE CONDUCTOR WIRE	2	2
7	P-1611	12-10 HEAT SEAL BUTT CONNECTOR	4	4
8	P-2762	1/2″ SPLIT WIRE LOOM, 1’ (30.48 cm) LENGTH	2	2
9	P-2369	16-14 HEAT SEAL BUTT CONNECTOR BLUE	4	4

 

		FIGURE 3 Parts List
REF. NO.	PART NO.	DESCRIPTION	VVK01 QTY.	VVK02 QTY.
1	P-1426	2” (2.5 cm) WIDE, 101 ”(256.5 cm) LONG CONSPICUITY TAPE	2	2
2	P-1426	2” (2.54 cm) WIDE, 25” (63.5 cm) LONG CONSPICUITY TAPE	2	2

 

		FIGURE 4 Parts List
REF. NO.	PART NO.	DESCRIPTION	VVK01 QTY.	VVK02 QTY.
1	B134-5748	REAR CORNER/SIDE CLEARANCE MARKER LAMP BRACKET	2	2
A	P-4189	REAR CORNER/SIDE CLEARANCE MARKER LAMP (EXISTING ON TRAILER)	2	0
2	P-4189	REAR CORNER/SIDE CLEARANCE MARKER LAMP	0	2
3	P-1473	1/4-20 X 1 HEX HEAD BOLT	4	4
4	P-1472	1/4 ID FLAT WASHER	4	4
5	P-2782	1/4-20 NYLON LOCKNUT	4	4
6	P-5730	REAR SIDE MARKER REFLECTOR	4	4
7	P-1054	1’ (30.48 cm) LENGTH DUAL CORE CONDUCTOR WIRE	2	2
8	P-2369	16-14 HEAT SEAL BUTT CONNECTOR BLUE	8	8
9	P-2762	1/2″ SPLIT WIRE LOOM, 1’ (30.48 cm) LENGTH	2	2

 

		FIGURE 5 Parts List
REF. NO.	PART NO.	DESCRIPTION	VVK01 QTY.	VVK02 QTY.
1	P-5783	WHITE CONSPICUITY TAPE	4	4

 

---

20 Affected Products

Vehicles

MAKE	MODEL	YEAR
VAC-TRON	CS 870 GT	2016-2020
VAC-TRON	CS 873 GT	2016-2020
VAC-TRON	LP MINI 373 DT	2016-2020
VAC-TRON	LP MINI 373 GT	2016-2020

 

---

10 Associated Documents

Non-Compliance Notice 573 Report

RCLRPT-20V288-2031.PDF 215.901KB

 

---

Recall Acknowledgement

RCAK-20V288-4306.pdf 245.494KB

 

---

Safety Bulletin

RCSB-20V288-7408.pdf 1234.305KB

 

---

Remedy Instructions and TSB

RCRIT-20V288-2056.pdf 2188.726KB

 

---

Miscellaneous Document- Before and After

RMISC-20V288-1574.pdf 539.633KB

 

---

Recall Quarterly Report #2, 2020-4

RCLQRT-20V288-7352.PDF 211.244KB

 

---

Recall Quarterly Report #1, 2020-3

RCLQRT-20V288-2698.PDF 211.142KB

 

---

Owner Notification Letter(Part 577)

RCONL-20V288-2172.pdf 222.846KB

 

---

Recall Quarterly Report #3, 2021-1

RCLQRT-20V288-9525.PDF 211.316KB

 

---

Recall Quarterly Report #2, 2020-4

RCLQRT-20V288-9726.PDF 211.322KB

 

---

Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V288&docType=RCL

 

---

 

Last update on 2025-04-15 / Affiliate links / Images from Amazon Product Advertising API

---

 

This product presentation was made with AAWP plugin.