| โThis site contains affiliate links for which OEMDTC may be compensatedโ |
June 11, 2020 NHTSA CAMPAIGN NUMBER: 20E035000
Rear Suspension Lower Control Rod Failure
If the rear suspension lower control rod fails, the bus may have reduced handling and stability, increasing the risk of a crash.
NHTSA Campaign Number: 20E035
Manufacturer Gillig
LLC
Components SUSPENSION
Potential Number of Units Affected 6,101
Summary
Gillig LLC (Gillig) is recalling certain aftermarket rear suspension lower control rods, part number 82-74712-000. The rear suspension lower control rods may experience fatigue failure due to stiffened end bushings.
Remedy
Gillig will notify purchasers of the aftermarket part, and provide owners with new lower control rods with different bushings, free of charge. This recall is expected to begin July 1, 2020. Owners may contact Gillig customer service at 1-800-735-1500.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
1 Affected Product
Equipment
| BRAND | PART NO. | PRODUCTION DATES |
| GILLIG | REAR SUSPENSION CONT. ROD | |
10 Associated Documents
Recall 573 Report- Amendment 3
RCLRPT-20E035-9056.PDF 213.474KB
Loading...
Reload document 
Open in new tab
Recall Acknowledgement
RCAK-20E035-4642.pdf 246.295KB
Loading...
Recall 573 Report- AMENDMENT 2
RCLRPT-20E035-3503.PDF 213.46KB
Loading...
Recall 573 Report- Amendment 4
RCLRPT-20E035-5473.PDF 213.473KB
Loading...
Recall Quarterly Report #4, 2021-2
RCLQRT-20E035-9862.PDF 211.415KB
Loading...
Recall Quarterly Report #2, 2020-4
RCLQRT-20E035-2410.PDF 211.222KB
Loading...
Recall Quarterly Report #1, 2020-3
RCLQRT-20E035-6106.PDF 211.115KB
Loading...
Recall Quarterly Report #3, 2021-1
RCLQRT-20E035-1941.PDF 211.306KB
Loading...
Recall Quarterly Report #6, 2021-4
RCLQRT-20E035-3601.PDF 211.613KB
Loading...
Recall Quarterly Report #5, 2021-3
RCLQRT-20E035-0220.PDF 211.528KB
Loading...
Latest Recalls Documents
| โThis site contains affiliate links for which OEMDTC may be compensatedโ |
Bestseller No. 1
Orion Motor Tech Bushing Press Kit, 27pc Pull and Press Sleeve Kit for Most LCV HGV Engine Cars Vehicles, Universal Seal Bearing Bushing Removal Installation Tool Kit 5 Pulling Spindles with Nuts Case
- Versatile Bushing Removal Tool: This pull and press sleeve kit by Orion Motor Tech provides everything you need to quickly and easily remove or install wheel bearings, bushings, and seals on most cars with an LCV or HGV engine
- Universal Press and Pull Sleeve Kit: This complete bushing press kit includes 22 sleeves with a bore diameter ranging from 34 to 80 mm and 5 pulling shafts in the sizes of M10, M12, M14, M16, and M18, fitting a variety of wrenches and drivers
- Notched Sleeve Design: Each sleeve is designed with a notch to securely catch the edge of the bushing while allowing clear visibility of the position of the bushing you're working on
- Durable Construction: Made of premium carbon steel, this press sleeve kit provides strong and dependable long-lasting service; the pulling spindles are heat treated and blackened for superior strength and corrosion resistance
- Compact & Portable: This 27 piece bush bearing insertion tool set comes with a blow-molded storage case, keeping everything organized and easy to carry from home garage to workshop
Bestseller No. 2
Orion Motor Tech Ball Joint Press Kit, Heavy Duty Ball Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks
- ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.
- PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
- UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
- CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11โ x 3โ x 15โ inch (27.9cm x 7.6cm x 38.1cm) plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
- ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know.
Bestseller No. 3
Jack Boss Ball Joint Press and U Joint Removal Kit, 10 PCS with Portable Storage Case of Bushing Press Kit Tools, Fits Most 2WD and 4WD Cars and Light Trucks
- Reliable Quality: Constructed from high-quality steel with black-oxide finish on adapters for maximum strength and lifecycle that resists rust and corrosion.
- Universal Compatiblity: Fits most 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pick-up trucks that have press-fit type ball joints.
- Easy to Use: Remove worn, rusted, and corroded parts with this ball joint remover kit could be super easy, even the novices could use it by referring to the instruction manual.
- Components List: Contains 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup and a portable case.
- No-Worry Guarantee: Each kit has been rigorously tested to ensure the safety of work. If you have any question, please feel free to contact us, we will do our best to handle.
SaleBestseller No. 4
WINTOOLS 27 Pcs Universal Press & Pull Sleeve Kit Bush Bearing Removal Insertion Tool Set
- The 27 Pieces of Press and Pull Sleeve Kit is designed for removal and installation of all types of bearings, bushes and seals. It is designed to remove and install bearings including Silent Bearings, Hydraulic Bearings, Bearing Bushes, Ball Bearings, Shaft Seals, Rubber Bearings and many more. It is crafted to remove bushes, bearing or seals without the need of a press and to reduce the possibility of damaging the bearings/suspension housings.
- Tool Press and Pull Sleeve Kit can also be used with a workshop press if required. This press kit contains a unique design with U-Plot on each sleeve for operator to easy visual inspect removal and installation. The spindles have thrust bearings fitted to both ends making the extracting and installing much easier. The end caps are also double sided making them a universal fit for the sleeves
- This professional pull and press sleeve kit set with 5 pulling spindles and nuts is designed for the removal and installation of bushes, bearings and seals.
- 22 Sleeves Material: 40 CR.; 5*pulling spindle 45# Carton steel + nuts sizes: M10, M12, M14, M16, M18.
- Specifications: 1. Press Sleeves Side Diameter: 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 75, 80mm Outside Diameter: 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 66, 68, 70, 72, 74, 76, 78, 80, 82, 85, 90mm 2. Pulling Spindles with Thrust Bearings: M10, M12, M14, M16, M18 3. Dimensions: (18.11 x 4.13 x 14.37)" / (46 x 10.5 x 36.5) cm (L x W x H) 4. Weight: 615.17oz / 17.44kg
SaleBestseller No. 5
Tiger Tool Pin and Bushing Starter Kit for Commercial Semi Trucks, Heavy Duty Starter Kit for use with Class 6 โ 8 Transportation Trucks & Equipment, 15000
- VERSATILE SERVICE CAPABILITY: The Tiger Tool 15000 Starter Kit revolutionizes pin and bushing service by allowing the use of various Pin & Bushing Adapters for servicing rubber-isolated and threaded pins and bushings directly on the vehicle. Note: Adapters required for operation are sold separately, ensuring you have the flexibility to choose the ones needed for specific tasks.
- WIDE COMPATIBILITY: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.).
- EFFICIENT & POWERFUL: With the Tiger Tool 15000, the cumbersome process of handling or removing heavy suspension assemblies is no longer necessary. This kit enables direct service on the vehicle, eliminating the need to remove spring packs from the axle, and offers 20 tons of pulling power for efficient pin removal and installation.
- TIME & LABOR SAVINGS: The combination of the 15000 Pin & Bushing Starter Kit with one or more adapters streamlines the maintenance process, eliminating the need to disassemble the suspension or use a shop press. This system can reduce shop time by up to 70%, offering a comprehensive solution with over 20 different adapter kits available, making it the most extensive service solution on the market.
- UNMATCHED STRENGTH & DURBILITY: Capable of generating 20 tons of pulling strength, the 15000 system effortlessly tackles even the most seized and rusted pins and bushings. U.S. Patent No. 8627557.
Bestseller No. 6
DA Yuan Universal Press and Pull Sleeve Remove Install Tool Bushes Bearings Kit
- Compatible Vehicles : Applicable to many cars and LCV ,HGV Engines
- Package: 20 x Press Sleeves, Inside Diameter from 34-72mm in 2mm steps, Outside Diameter from 44-82mm in 2mm steps, 4 x Pulling Spindles with nuts and thrust bearings (M10. M12. M14. M16)
- Product Usage: For Removal and Installation of Bearings, Bushes, Seals and cut down the possibility of damaging the bearing or suspension housings
- Benefit : Created from rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this tool set a long lasting and reliable tool
- Important Note: When doing automotive maintenance always make sure all the tools are correctly used and wear safety glasses and gloves . Any question or problem, feel free to contact us
Bestseller No. 7
Camotokiit Bushing Installation Tool Replacement Hendrickson S21307 for Turner Intraax Wide Bushing Complete Kit
- Bushing Type: Wide Beam Bushing
- Manufacturer Part Number: S21307
- Bushing Installation Tool for Hendrickson Replace Part # S21307, E9575, TRB5912-T Automann
- Funtion: For use with Hendrickson Tri-Functional Wide Beam Bushing Kits.This kit will easily remove and install the Hendrickson Intraax Tri-Functional bushing while the suspension remains on the trailer. Made to service most Hendrickson, Hendrickson Turner, Watson Chalin, and Automann bushings
- Note:Ensure that threads on tool are well lubricated before and during use to avoid damaging threads.The lubricating grease helps you better complete your work
Bestseller No. 8
28pcs Press and Pull Sleeve Kit Bushes Bushing Bearings Seals Removal Installation Tool Bushes Bearings Seals Removal Install Tool
- ใBicos Multifunctional Tool for Bushing, Bearing, and Seal Maintenanceใ This adaptable tool from Bicos offers a comprehensive solution for both removing and installing a variety of components, including bushings, bearings, and seals.
- ใOutside Diameterใ 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82mm.
- ใInside Diameterใ 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72mm.
- ใApplicable Modelsใ Fits for automobiles and LCVs.
Bestseller No. 9
ACTINTOOL 5 5/8 in. x 1 1/4 in. 16 Tips Concrete Repair Patch Prepare Sds Plus Bushing Tool, 1 1/4 Inch Square Head Concrete Roughness Coating Remove Bushing Bit for Rotary Hammer (Pack of 1)
- ใConcrete Surface Prep & RestorationใBest for small area concrete repair and patch, roughen and pulverize concrete to increase the new coating bonding effectiveness
- ใFit With SDS Plus Rotary HammerใSDS Plus 3/8"(10mm) diameter shank bushing tool, Fit with SDS Plus rotary hammer
- ใPack of 1 pcs ใPack of 1 pcs sds plus bushing bit
- ใSizeใ5 5/8 inch overall length, 1-1/4*1-1/4 inch square bushing head
- ใDurable One Piece ShankใChrome steel durable one piece sds plus shank bushing chisel
Bestseller No. 10
Orion Motor Tech 52-in-1 Custom Bushing Driver Tool Set and Transmission Wheel Axle Bearing Race Seal Installer Remover, Bush Removal Puller Bearing Press Tool Kit
- UNIVERSAL SIZING: This Orion Motor Tech bushing removal tool kit includes 50 interchangeable discs to build 2,450 custom bushing driver variations so you always have the right size for the job.
- COMPLETE SET: The discs sizes range from 18mm (0.7 inches) all the way to 65mm (2.51 inches) in 1mm increments plus 74mm (2.91 inches). All discs are connected with a 12mm (0.47 inches) shaft and screw which quickly connects to a 180mm (7.08 inch) handle, making for a complete and effective wheel bearing driver set.
- EASY OPERATION: This auto tool kit includes a long handle shaft to simplify bearing race and seal replacement and help you remove or install wheel bearings quickly and professionally.
- HEAVY-DUTY DURABILITY: With ultra-strong carbon-steel construction and black anodic oxidation coating for rust-resistance, this mechanic toolset will stand up to years of heavy use.
- PROTECTIVE CARRYING CASE: Includes a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set.
Last update on 2025-04-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.