| โThis site contains affiliate links for which OEMDTC may be compensatedโ |
August 21, 2020 NHTSA CAMPAIGN NUMBER: 20E059000
Electronic Control Center Circuit Board may Short
If too much voltage is applied to the unit and the circuit board becomes damaged, there would be an increased risk of fire.
NHTSA Campaign Number: 20E059
Manufacturer Spyder Controls, Corp
Components ELECTRICAL SYSTEM, EQUIPMENT
Potential Number of Units Affected 3,419
Summary
Spyder Control, Corp (Spyder) is recalling certain G9 electronic control units, part numbers BMODWTIR1, DMODZTIR4, and BMODWTIR4. These units can fail if excessive voltage is applied, causing the components on the board to become damaged.
Remedy
Spyder has notified the affected component purchasers, who have filed their own recalls, and will provide a G9 Protection module to limit voltage, free of charge. The recall began September 30, 2020. Owners may contact Spyder customer service at 1-403-782-9738.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Safety Recall: 20V – 542
Pleasure-Way Industries, Ltd.
September 2020
IMPORTANT SAFETY RECALL
Dear (NAME):
This applies to your Tofino VIN# ________________________.
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Pleasure-Way in consultation with Spyder Controls has decided that a defect which relates to motor vehicle safety exists in certain 2019 โ 2021 Pleasure-Way Tofino Motor Homes equipped with Spyder Controls G9 Electronic Control Module (ECM) . Our records show your unit is affected by this recall.
Reason for this recall
The G9 ECM does not have over voltage protection greater than 18 volts, if the vehicle is given a boost with a 24 volt system or the auxiliary batteries are wired in series rather than in parallel as designed, the G9 ECM could be subject to 24 volts and would not be protected.
If the G9 ECM receives overvoltage for a continued period of time it could damage the G9 panel or create a thermal incident. This may result in a fire which could result in property damage, personal injury, or death.
Recall Remedy
Install a G9 Protection Module supplied by Spyder Controls Corp between the battery and the G9 ECM.
What should you do?
- Go to the Spyder Controls Corp recall website at g9recall–pw.com and enter your VIN number and shipping address.
Once your information has been submitted, a G9 Protection Module will be shipped directly to you, as well as service center instructions and other vital information.
- Schedule an installation appointment with a Pleasure-Way dealer/service center.
For dealer locations, visit https://pleasureway.com/shopping–tools/locate–a–dealer/ . If you are not able to make an appointment with one of these facilities, please schedule an appointment with an RV Service Center of your choice.
- Take the G9 Protection Module which was sent you to the service center for installation.
The repair will be completed at NO CHARGE to you. The dealer or repair facility of your choice will contact Spyder Controls Corp. for payment per the instructions provided with the G9 Protection Module. This installation should take 15 to 30 minutes to complete.
If you have any installation questions, contact Spyder Controls at 1-877-977-2752 for additional information.
Leased Vehicle:
If you have leased out the vehicle, you as the current owner shall send to the lessee a copy of the notice and any subsequent notice within 10 working days after the day on which the notice is received.
What to do if you feel this notice is sent in error?
Our records show that you are the current owner of a 2019-2021 Pleasure-Way Tofino that is involved in this campaign, if this is not the case or the name and address information is not correct, please contact Pleasure-Way Industries at 1-800-364-0189 or email warranty@pleasureway.com .
If you have any questions about this recall:
Please contact Pleasure-Way Industries Ltd. by email warranty@pleasure-way.com or call 1-800-3640189, or contact Spyder Controls Corp. at PWG9Recall@spydercontrols.com or call 1-877-977-2752.
If after having attempted to take advantage of this recall you believe you have not been able to have your unit remedied without charge and within a reasonable about of time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, D.C. 20590 or call the toll-free vehicle safety hotline at 1-888-327-4236 (TTY: 1-800-4249153); or go to https://www.safercar.gov .
We apologize for any inconvenience this situation may cause and greatly appreciate your cooperation. Our customersโ safety is our most important priority.
Sincerely,
Spyder Controls Corp and Pleasure-Way Industries Ltd.
Safety Recall: 20V 542
Pleasure-Way Industries, Ltd.
September 2020
IMPORTANT SAFETY RECALL
Dealer Name
Dear Valued Dealer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Pleasure-Way in consultation with Spyder Controls has decided that a defect which relates to motor vehicle safety exists in certain 2019 โ 2021 Pleasure-Way Tofino Motor Homes equipped with Spyder Controls G9 Electronic Control Module (ECM) .
Reason for this recall
The G9 ECM does not have over voltage protection greater than 18 volts, if the vehicle is given a boost with a 24 volt system or the auxiliary batteries are wired in series rather than in parallel as designed, the G9 ECM could be subject to 24 volts and would not be protected.
If the G9 ECM receives overvoltage for a continued period of time it could damage the G9 panel creating a thermal incident. This may cause a fire and could result in property damage, personal injury, or death.
Recall Remedy
Install an G9 Protection Module supplied by Spyder Controls Corp between the battery and the G9 ECM.
What should you do?
Our records show the following units may be affected by this recall and are currently part of the inventory at your Dealership. The Recall Remedy must be completed on these units prior to customer delivery. The G9 Protection Module and installation instructions can be obtained directly from Spyder Controls at https://www.g9recall–pw.com/ (Step 2).
Please contact the Spyder Controls at PWG9Recall@spydercontrols.com or phone 1-877-977-2752 with any additional questions.
<< VIN 1 >>
<< VIN 2 >>
<< VIN 3 >>
FEDERAL LAW requires that all units in your inventory be repaired prior to delivery to a customer. If you have sold a unit recently that you have received a recall notice on, please contact the owner immediately to advise of the recall. In addition, please register the unit by submitting the Warranty Registration.
Time allotted: 0.5 hours per unit. Additional labor requests require prior authorization from Spyder Controls. Claims for the units which have been serviced must be submitted at https://www.g9recallpw.com/servicecenter . Claims submitted will be used by Spyder Controls Corp. to record recall service completions and provide dealer payments.
We apologize for any inconvenience this situation may cause and greatly appreciate your cooperation. Our customersโ safety is our most important priority.
Sincerely,
Spyder Controls Corp and Pleasure-Way Industry Ltd.
1 Affected Product
Equipment
| BRAND | PART NO. | PRODUCTION DATES |
| SPYDER CONTROLS | G9 | |
10 Associated Documents
Recall Quarterly Report #2, 2020-4
RCLQRT-20E059-0462.PDF 211.219KB
Loading...
Reload document 
Open in new tab
Recall 573 Report – Amendment 4
RCLRPT-20E059-4545.PDF 213.023KB
Loading...
Recall Quarterly Report #1, 2020-3
RCLQRT-20E059-3523.PDF 211.219KB
Loading...
Defect Notice 573 Report
RCLRPT-20E059-1606.PDF 212.755KB
Loading...
Recall Acknowledgement
RCAK-20E059-2275.pdf 323.782KB
Loading...
Recall 573 Report – Amendment 1
RCLRPT-20E059-9479.PDF 213.808KB
Loading...
Recall 573 Report – Amendment 3
RCLRPT-20E059-2158.PDF 214.504KB
Loading...
Recall Quarterly Report #3, 2021-1
RCLQRT-20E059-7568.PDF 211.308KB
Loading...
ISSUED Owner Notification Letter(Part 577)
RCONL-20E059-4716.pdf 233.452KB
Loading...
Manufacturer Notices(to Dealers,etc)
RCMN-20E059-5570.pdf 176.021KB
Loading...
Latest Recalls Documents
- ใMeet Different Needsใ The 12V round voltmeter comes with a panel and a nylon nut, which can be mounted separately on the 29mm diameter mounting hole or fixed on the matching panel, so that it could meet your different mounting needs.
- ใBlue LED Displayใ This 12V battery meter with blue LED light, can be widely used under DC 12V 24V. With the digital voltage meter, you can easily monitor the voltage status of your car battery in real times, especially in dark environments.
- ใWaterproof & Usefulใ The marine voltmeter gauge is waterproof design, so this LED voltmeter is safe to use even in moist environments. And also the mini
voltmeter is fit for 12V 24V cars, automotive, motorcycles, RVs, SUV, Off-road, ATV, boats, marine, ships, trucks, tractor, etc. - ใMeasuring Rangeใ The rating of this battery voltage monitor is DC 8-48V, and its accuracy is 0.1V. With the precise 3-digit LED digital voltmeter, you can better monitor of the car's battery voltage status, helping to extend battery life.
- ใEasy installationใ This 12 volt battery monitor comes with a set of wires, two mounting screws, a matching panel and a nylon nut, making it easy to install and use.
voltmeter is fit for 12V 24V cars, automotive, 
- Universal battery capacity indicator voltage meter - wide voltage input range DC 12V-84V Lead-acid Batteries and 3S-26S Lithium Batteries: Ternary lithium batteries, polymer batteries, lithium-ion batteries, storage batteries.
- Multifunctional Battery Capacity voltage meter Indicator - Battery tester Right Switch key can switch voltmeter, battery percentage, switch off. Left setting key have several functions: Cycle voltmeter/battery percentage, turn on the backlight, black, sleep mode, battery type selection etc.
- High Quality of battery voltage meter - Large LCD screen display with green backlit and low power consumption.Two display modes can be available: battery symbol and battery percentage, battery symbol and voltmeter.
- Safety to Use - The battery voltage meter Built-in 30cm power cable, simple to connect. Reverse protection design, won't burn if connect reversely.
- Portable and Waterproof voltage meter- Small size, light weight, equipped with a PVC film, the surface is waterproof.
- Dual-display: it can display auto battery voltage and temperature inside the car simultaneously(this is for Fahrenheit)
- External temp sensor: its external temp sensor allows you to bend sensor to avoid possible heating/ direct sunshine so that you can acquire more accurate results
- Safe usage: the monitor has built-in fuse, making safe usage possible and causing no damage to your car
- Easy reading: it screen is made of LED material, hence it is easy and convenient for you to read even in dim light
- With red screen digital color, there is no difficulty in seeing the display; Apply for DC 12V or 24V car; Measuring range: DC 8V-30V+/-1.2% (The voltage of car usually reads 12Vยฑ0.5V when it works; PLEASE ALLOW 0.1-0.5 VOLTS DISPLAY ERROR)
- This digital gauge displays the voltage of batteries in the car; Powered by car cigarette lighter charger
- Simple enough to use, just plug it into cigar lighter socket, watch alternator's output from idle to accelerated speed
- When engine running (do not drive), the LED display: between 13.5 to 14.5 (12V car), between 26.0 to 28.0 (24V car)
- When engine off, and nothing turned on, LED display: Greater than 12.0 (12V car) or 24.0 (24V car)
- Efficient setting key: the multifunctional battery capacity indicator has a new design of the front setting button, and have several functions: cycle voltmeter/battery percentage, turn on the backlight, black, sleep mode, battery type selection etc.
- Humanized designs: the battery capacity voltage indicators are designed with switched function button, you can press to check the battery capacity or real-time voltage and turn off, with alarm design, the battery meter display will flash when the battery capacity is low
- Fit different battery: the battery gauge indicators are compatible with 12V/ 24V/ 36V/ 48V/ 60V/ 72V/ 84V acid battery, ternary lithium battery, polymer lithium-ion battery, 3 -15 series lithium ion battery, storage battery, water battery and more
- LCD display: the battery capacity gauge indicators come with PVC waterproof screen protector with bright back-light, which makes you can read the results on the clear LCG display from different angles, low working power consumption and the max is 5 mA
- Suitable for: the battery meters with alarms can be applied to different machines and places such as garden, home, office and more, can serve you for a long time, meeting your different needs and practical battery indicators will give you nice experience
- โ 12V Lead-Acid Battery Monitor: ANCEL BM200 Pro is a 12V lead-acid battery tester, which consists of a wireless host unit and a wireless display. It can display the voltage, power, temperature and health of the battery in real time, and automatically test the starting and charging systems of the vehicle. When the temperature is abnormal, low power, low voltage, startup system failure, charging system exceeds the normal range, the wireless display will automatically emit alarm sound to remind.
- โ 433MHZ Radio Frequency Transmission: Compared with Bluetooth, BM 200 Pro battery monitor adapt 433MHz RF technology has the advantages of better penetration ability, longer signal transmission distance( It can reach tens of meters), more energy saving and less signal interference, which is suitable for data transmission in any complex environment. Such as basement, stairwell, rural areas and any other places, etc.You do not need to connect to the network,phone and install the app.
- โ Energy Saving And Environmental Protection: The car battery tester display screen adopts two modes of power supply:Type-C fast charging and solar panel. The solar panel powers and charges the device so that it does not need to be charged as often.The use of solar cells are more environmentally friendly, energy efficient, and can work independently of the grid.This is very useful for some remote areas or wilderness adventure and other scenarios.High economy can reduce energy costs.
- โ Build-In Vibration Sensor: battery load tester with automatic on/off function. when BM200 Pro feels the vibration, it will automatically turn on and keep running for 5 minutes. If the device feels the vibration again within 5 minutes,it will continue to keep the power on. if no vibration occurs within 5 minutes,then BM200 Pro will automatically go into standby. Helping users to eliminate the step of turning off the device when it is not needed, thus improving the convenience of using the device.
- โ Safety Protection & Wide Compatibility: Built-in fuse and reverse connection protection, unlike other car battery tester automotive, our ANCEL BM200 Pro digital car battery load tester all batteries are equipped with 100% high quality safety copper clips with reverse polarity protection and spark protection for stable and safe connection during testing. Suitable for all 12V lead-acid batteries, such as: cars, motorcycles, trucks, RVs, ATVs, suv's, boats, yachts, lawn mowers, etc.
- ใMeasuring Rangeใ: The measuring range of this automobile voltmeter is DC 6-36V with an accuracy of 0.1V, which is widely used in cars, trucks, motorcycles, ships, yachts, trailers, etc. You will receive 1 car voltmeter and 2 nuts in the package. Effortlessly monitor your battery voltage with all necessary accessories included.
- ใNoteใ: Battery voltage judgment standard: Before starting the vehicle: 1. Less than 10.8V, it is too low and the car cannot be started. It is recommended to replace the battery; 2. Between 10.8V-11.8V, it is too low and it is difficult to start. Please turn off other electrical appliances and start the car to charge; 3. Between 11.8V-12.8V, it is normal. After starting the vehicle: 1. Between 12.8V-13.2V, it is too low and the battery may not be charged. Check the engine or other electrical loads; 2. Between 13.2V-14.8V, it is normal; 3. Greater than 14.8V, it is too low and may damage the battery. Check the engine stabilizer.
- ใDigital Voltmeter Displayใ: Featuring a precise 3-digit LED digital display, this 12V battery monitor provides clear digital readings allowing you to monitor real-time battery voltage status even in dark environments.
- ใPremium Materialใ: This vehicle voltmeter is made of high-quality PC material, waterproof, flame retardant, high-temperature resistance, corrosion resistance, long service life, is not easy to deform, safe to use in wet environments. It also has reverse connection protection to prevent the line from burning out.
- ใMeet Different Needsใ: The 12V round voltmeter comes with a panel and nylon nuts, just install the voltmeter in the 1-1/8-inch hole on the panel, and the nylon fixing nut will fix the meter in the appropriate position, which can meet different installation requirements.
- 1.9 in 1 Measuring Type/Range:Voltage 0-200V,Current 0-300A,Power 0-60000W,Impedance 0-1000ฮฉ,Internal Resistance 0-999mฮฉ,Capacity 0-1000AH,Dump energy 0๏ฝ9999kWh,Running time 0-999 hour.
- 2.LCD Display:Large-screen LCD with a full sight of 180ยฐ view,The blue backlight can be turned on/off manually.
- 3.Two modes: normal display mode and dormant mode.
- 4.No screws design: Press down terminal buttons, insert bare thread and release.
- 5.Wildly application:DC multifunction battery meter wildly applied to solar system/industrial assembly line/Automobile/RV etc.
- MEET THE BM300 Pro - Similar to the BM300, offers wider applications. Enhancements include 24V power, upgraded Bluetooth 4.0 to 5.3, extended data storage from 30 to 72 days, IP67 waterproofing, customizable batteries, ability to monitor 4 batteries simultaneously
- KEY FEATURES - BM300 Pro monitors battery health, including voltage, cranking & charging system and driving records. It monitors abnormal battery conditions and takes appropriate measures to protect the battery. With 72 days of data storage, you can compare changes before and after taking measures, giving you a better understanding of your battery's status
- BLUETOOTH 5.3 Ver. - Say goodbye to checking the battery status under the hood. Whether it's scorching hot or freezing cold, or even rainy days, the 3.2oz battery monitor lets you comfortably monitor real-time battery data from inside your car or up to 10m, allowing for proactive intervention. Plus, with the Bluetooth 5.3 upgrade, you'll identify and connect to Bluetooth even faster. Note: Bluetooth connectivity may be affected by extreme cold or obstacles. For optimal performance, use it in a clear, open area with suitable temperatures
- EASY TO USE - Install once and permanently fix onto your battery without the trouble of repeated installation. Access the batteryโs health data directly from your phone and enjoy real-time monitoring by opening the app. Additionally, the power consumption is as low as 1mA, almost negligible- making it a hassle-free stethoscope for your car battery
- ๏ผ99.6% ACCURANT READINGS - Equipped with an intelligent chip for precise data readings. The connector design features red and black rubber handles, making it easy to place on battery terminals and achieve a snug fit for more accurate readings the longer you monitor
- โ ๏ธ THREE-COLOR LED DIGITAL LIGHT DISPLAY: This digital voltmeter with LED digital display, with high-brightness red, orange and green three-color digital LED light, can show the different voltage status of the battery, which is convenient for you to clearly and intuitively check the battery voltage value.
- โ ๏ธ REAL-TIME MONITORING OF BATTERY VOLTAGE: Ourbattery monitor 12V is convenient for you to monitor the voltage of the battery in real time, and know the voltage of the battery in time. Let the voltage can be used under normal working voltage, protect the car battery and engine, prolong the service life.
- โ ๏ธ EASY TO INSTALL AND PORTABLE: The car battery monitor is made of reliable ABS material, sturdy and durable, with high protection level, easy to use even in many harsh environmental conditions. Easy to install, just plug in the power cord. And the compact and lightweight design makes it easy to carry and store.
- โ ๏ธ WIDE APPLICATION: This voltmeter digital is specially designed for 12V DC system to avoid malfunction. It is suitable for most of the models with 12V DC voltage on the market, such as car, truck, SUV, RV, van, motorcycle, boat, ATV, UTV, etc. Providing you with a safer and more stable driving environment.
- โ ๏ธ BUYING GUIDE: You will receive 1pcs battery voltage meter and 2pcs accessories with protection pins. With a test voltage range of 5-36V and a voltage measurement accuracy of 0.1V. After owning our voltage meter, you no longer need to worry about the battery suddenly dying and not being able to start your car.
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.