| “This site contains affiliate links for which OEMDTC may be compensated” |
January 8, 2021 NHTSA CAMPAIGN NUMBER: 21V003000
D-Ring Installed Too Close To Mounting Flange
The improper crimping may result in partial or complete loss of effectiveness of the seat belt harness, increasing the risk of injury to the occupant in that seated position, in the event of a crash.
NHTSA Campaign Number: 21V003
Manufacturer Braun Ambulances
Components SEAT BELTS
Potential Number of Units Affected 61
Summary
Braun Ambulances is recalling certain 2019 and 2021 Crestline CCL150 Type III E-Series and 2019-2020 Crestline CCL150 Type I F-Series
and CCL150 Type III G-Series ambulances. Two of the eight fastening points of the seat belt system installed in the ambulance patient compartment side-facing CPR seating position on the street-side of the vehicle may be defective. Two of the threaded inserts used for the rearward retractor and shoulder belt D-ring are installed too close to a mounting flange resulting in improper crimping of the threaded insert.
Remedy
Braun will notify owners and dealers will inspect both seat belt anchor points and if no defect exists, no further action will be required. If the inspection shows the defect exists on one or both seat belt anchor points, your dealer will replace the defective insert(s) with nut plate(s) during the inspection, free of charge. The recall began on March 1, 2021. Owners may contact Braun Ambulances customer service at 1-877-344-9990.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
IMPORTANT SAFETY RECALL
NHTSA Recall Number: 21V003
Date: February 1, 2021
Dear #dealername#,
Braun Industries has decided that a defect which relates to motor vehicle safety may exist in certain 6-point seatbelt anchor bolts for the CPR seat seatbelt in certain model year 2019 through 2021 Crestline CCL150 Ambulances.
The affected system components are the upper right shoulder seat belt d-ring anchor point and the lower right seat belt retractor anchor point of the side facing seated position on the street side of the vehicle (CPR seat). During our manufacturing and quality control process, we became aware of the potential of one or both seat belt anchor points being improperly seated due to improper crimping of the threaded insert. Improperly crimped seat belt anchors may result in partial or complete loss of effectiveness of the seat belt harness which may increase the chance of injury to the occupant, in that seated position, in the event of a crash.
You are receiving this notice because the following vehicle are affected by this recall:
| Dealer | Customer | Truck Number | VIN |
| #name# | #name# | #number# | #VIN# |
| #name# | # name# | #number# | #VIN# |
| #name# | #name# | #number# | #VIN# |
It is a violation of Federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect is remedied.
The likelihood of experiencing this loss in functionality is unlikely, however we will require all vehicles to be returned to the dealer for an inspection and if required a retrofit to ensure that no issues exist.
Inspection measuring tools, parts, and instruction will be available March 8, 2021. Work instruction, inspection tool, and replacement fasteners will be sent to the Crestline Dealers performing the inspection. Crestline Dealers will inspect affected vehicles with the supplied inspection tool, according to the FMD-016 Inspection & Modifications of CPR Seatbelt Anchor Points on CCL-150 Units. Vehicles that require modification will have the nutsert(s) replaced by the supplied threaded backing plate(s), per the process specified in FMD-016, to remedy the defect. Vehicles that do not require modification are to have the seating system reassembled. Customers on file will be directed to take their ambulance/s to their Dealer to have this action performed.
Phone: 877-344-9990 6:00 a.m. – 4:30 p.m. EDT Email: braunservice@braunambulances.com
We apologize in advance for the inconvenience this issue may cause your organization. We will make every effort to make this as simple as possible on both our Dealers and our Customers.
5 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| CRESTLINE COACH | CCL150 TYPE I | 2019-2020 |
| CRESTLINE COACH | CCL150 TYPE III | 2019-2021 |
7 Associated Documents
Recall Acknowledgement
RCAK-21V003-3087.pdf 245.937KB
Loading...
Reload document 
Open in new tab
Defect Notice 573 Report
RCLRPT-21V003-4024.PDF 214.288KB
Loading...
Recall 573 Report- Amendment 1
RCLRPT-21V003-3650.PDF 215.922KB
Loading...
Manufacturer Notices(to Dealers,etc)
RCMN-21V003-6083.pdf 228.028KB
Loading...
Recall Quarterly Report #2, 2021-2
RCLQRT-21V003-7265.PDF 211.288KB
Loading...
Recall Quarterly Report #3, 2021-3
RCLQRT-21V003-7925.PDF 211.288KB
Loading...
Recall Quarterly Report #1, 2021-1
RCLQRT-21V003-6183.PDF 211.288KB
Loading...
Latest Recalls Documents
| “This site contains affiliate links for which OEMDTC may be compensated” |
- Carabiner Clips Product Include : 6pcs nonlocking carabiner clips , 6pcs keyrings.
- Reliable Quality Caribeener Clips:- 2.5" Iron carabiner keychain Clip made of high quality iron, lightweight, mini
size,strong and practical. Maximum static load: 800lbs (fully off mode). - Improved High Quality Spring:The spring loaded gate metal biner ensures quick link and locking.
- Multi-Purpose Carabiner : Carabiners can be easily attached to pocket, backpack,carry keys, water bottles, camping gear, lanterns, lights, keychains, key ring, Dog walking, Camping, Hiking, etc.Not recommended for rock and mountain climbing or heavy duty safety equipment.
- Carabiner Clips : Iron Carabiner Clip are widely used for many purposes. Not for climbing !!!
- Pro Quality D-Ring Hanger will support 10 pounds. Frame back hanger for wood picture frames.
- 1 1/4" Long x 5/8" Wide D-Ring Picture Hanger. Bulk pack includes 100 hangers
- Framing supplies kit includes 100 #6 x 1/2" Combo Top Slotted/Phillips Screws
- Our D-Rings have the most inside wire or ring wrapped around the strap which makes this heavy duty picture hanger stronger than others
- D-Ring hanger with doubled over steel strap will support 10 pounds
- Size: There are five sizes of d rings for sewing, namely 10 pcs 32mm, 15 pcs 25mm/1inch, 15 pcs 20mm, 25 pcs 15mm and 25 pcs 12mm.
- Multiple USES: Suitable for sewing belts, bags, handbags, backpacks, clothes, pet collars, etc.
- Material: Our d rings for sewing are made of high quality alloy, with good plating and rust resistance, they have smooth surface, very convenient and comfortable to use.
- Quantity: You will get 90 metal d ring, enough for your daily use.
- Quality: Our metal d ring are all well made. If there is any quality problem with the products you receive, we will deal with it for you as soon as possible.
- LATEST IMPROVED DESIGN: This is the latest design. We improved the structure to make it stronger and lighter. The bonus stainless wire keychain allows you to easily hook your keys on the caribeener clips
- LIGHTWEIGHT & STRONG: STURME carabeeners clip are made of superior durable lightweight aircraft aluminum alloy. So it is elegant durable strong and light. You don’t have to worry about it will rust
- MULTIFUNCTIONAL: STURME D Ring Carabiner clips are very suitable for outdoor hiking, fishing, camping, traveling etc. The lock system will keep you safe. Use it to key chain clip, attach the sports bottle, backpack, ropes of camping tent, hiking pole
- DIMENSION: Caribeaner Length: 2” (51mm); Width: 1.06” (27mm); Diameter: 0.18” (4.5mm); Weight: 0.16 ounce. WARNING: caribeener clips NOT applicable for climbing, swing, hammock, punching bag
- AFTER-SALES: We provide one year after-sales service for our products. You could relate us if you have problem, we will solve the problem for you
- Pack Size: 12 Pack
- Size: 1/2" (12,000 Lbs)
- Work Load Limit: 4,000 lbs
- Heavy Duty Forged Mounting Ring
- Lashing Ring Weld On
- 👍STURDY&DURABLE — Black D Ring Tie Down Anchors 1/4" diameter thick, they are strong and durable, can handle a load up to 2400 pounds per D ring.These rings come with mounting brackets and screw,The accompanying mounting plates / brackets allow the D rings to flip in any angle within 180 degrees
- 👍ANTI-CORROSION&RUST-PROOF — D Ring anchor are made of high strength solid metal and painted with quality black protective coating to avoid rusting. There are quality coating painted on the tie down anchor to keep it far away from rusting, you should never worry about the rain or other matters to make the bolts rusted, they must keep in good condition to water
- 👍SIZE INFORMATION — D rings inner clearance: 1" x 1 3/8" , mounting bracket: 2 1/4" x 3/4" x 1/8" . Hole: 1/4"(6 mm)
- 👍WIDE APPLICATION— 1/4" D ring is multipurpose surface-mounted tie-down adds a convenient anchor point to the rope, bungee cord or belt, which is very suitable for the cargo management of Trailers, Trucks, Vans, Pickup, Flatbed railers, Utility trucks, RV Campers, Boats, Motorcycles ,Kayaks, ATVs
- 👍EASY INSTALLATION — Anchor rings with mounting brackets, you only jJust need two 1/4" diameter bolts and basic hardware to fit the hole on the mounting clamps, and it is easily fastened on metal surface or floor
- 【Robust and Durable】: Made with high-quality forged steel, this D-ring is designed to withstand heavy loads and prolonged use, ensuring maximum longevity and reliability.
- 【Versatile Application】: Ideal for construction, marine activities, towing, industrial manufacturing, and many other high-performance tasks. A must-have tool for heavy-duty operations.
- 【Safety First】: Our D-ring meets stringent quality standards and is built with safety in mind, ensuring secure connections and peace of mind during any task.
- 【Corrosion Resistant】: Coated with a protective layer to resist rust and corrosion, making it suitable for both indoor and outdoor use, even in challenging weather conditions.
- 【Easy Installation】: Designed with user convenience in mind, our D-ring offers easy installation and can be quickly attached to chains, ropes, straps, or any other connecting equipment.
- 【High strength load】The D-rings Tie Down Anchors Hooks 1/4" thickness solid steel. Each breaking strength 2400lb.
- 【Easy Installation】You can use bolts to fix D-Rings Anchor on wood, metal or wall surface.
- 【Excellent process】Ours D-rings Tie Down Anchors Hooks has high quality solid steel, high hardness, not easy to deformation. Smooth product appearance, galvanized surface, good rust resistance and long service time.
- 【Various uses】Provide fixed anchor points or temporary anchor points for ropes. Can be used to fit motorcycles, trucks, vans, boats and other means of transportation, but also for indoor home decoration or outdoor activities and other scenes of use.
- 【Packaging Instructions】 After purchase, you will receive 12 sets of D-rings Tie Down Anchors Hooks.
- 【 UNIVERSAL D RING SHACKLES 】 - 3/4" d-ring shackles 4.75 Ton (9,500 Lbs),with an Industry Standard 7/8" Screw Pin. Designed to work specifically with tow strap hooks,ideal for most car accessories.
- 【 4.75 TON CAPACITY 】 - Nilight D Ring Shackles are rated at 9,500 Lbs of Towing & Recovery Capacity for pulling or towing.Excellent addition to your recovery kit. Perfect for anyone towing or hauling vehicles or trailers.
- 【 OFF-ROAD VERSATILITY 】 - Universal design and great for Jeeps, ATV, UTV, Trucks, Trailers, and sport-utility vehicles and for use with receiver hitch, winch snatch straps, snatch blocks, tree savers - best off road recovery accessory.
- 【 D RINGS WITH ISOLATOR & WASHER 】 - Nilight heavy duty D ring are powder coated for corrosion resistance,Comes with black isolator and washer, reduce rattling noise and protect your bumper finish from damage.
- 【 BEST SERVICE 】 - Buy At Nilight , You Earn What You Buy! We offer 2 Years Nilight and Lifetime Best Customer Service . If you have any questions or problems, please contact us.
- 【 Package Content 】2 pcs 1/2" D Ring Shackle,with an Industry Standard 5/8" Screw Pin.
- 【 D Ring Shackle Size 】Shackle Dia.: 13mm(1/2");Screw Pin Dia.:15mm(0.6"); Outlet Dia.: 60mm(2.36"); Inner Dia.: 33mm(1.3").
- 【 2 Ton Capacity 】This bow shackle is made of ultra strong drop forged steel and 26,455lbs maximum break strength,the towing capacity is up to 2 tons (4409 Lbs), high strength.
- 【 Double Safeguard 】D Shackle has double protected for prevention rust and corrosion by galvanize & powder coat plating, it can withstands harsh weather conditions.
- 【 Universal Design 】Universal design and great for Jeeps, ATV, UTV, Trucks, Trailers, and sport-utility vehicles and for use with receiver hitch, winch snatch straps, snatch blocks, tree savers - best off road recovery accessory.
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.