| โThis site contains affiliate links for which OEMDTC may be compensatedโ |
January 28, 2021 NHTSA CAMPAIGN NUMBER: 21V030000
Seat Belt Wiring Harness May Chafe
The vehicle may stall and not restart, without warning, increasing the risk of a crash, personal injury or property damage.
NHTSA Campaign Number: 21V030
Manufacturer Autocar, LLC
Components SEAT BELTS
Potential Number of Units Affected 3,196
Summary
Autocar, LLC (Autocar) is recalling certain 2018-2021 Xpeditor vehicles. These vehicles may have a seat belt harness routing located too close to the seat mechanism. If the harness chafes and short circuits, the circuit protection fuse will open, and the engine will shut off and not restart.
Remedy
Autocar will notify owners, and dealers will route and secure the seatbelt wiring clear of the seat mechanism, free of charge. The recall began on March 25, 2021. Owners may contact Autocar customer service at 1-888-218-3611 or 1-877-973-3486. Autocar’s number for this recall is ACX-2101.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
SAFETY RECALL BULLETIN
NHTSA RECALL 21V030
AUTOCAR, LLC SAFETY RECALL ACX-2101
March, 2021
ATTENTION:
Service Managers / Parts Managers.
SUBJECT:
Autocar has determined that a safety defect may exist in the routing of the seat belt wiring harness on certain 2018-2021 model year Xpeditorยฎ vehicles. The seat belt wiring harness routing may be too close to the seat mechanism and may chafe, if the harness becomes chafed and short circuits, the circuit protection fuse will open, and the engine will shut off and not restart.
Note: This recall applies to left drive, right drive, and dual drive sit-down seating applications with suspension type seating. The repair time allowance is applicable to left, right or both. Stand-up drive and fixed position seating positions are not included or suspect under this recall.
SAFETY RECALL INFORMATION:
This document provides work instructions to inspect, repair or route the seat belt wiring harness(s).
VEHICLES AFFECTED:
There are 3196 units manufactured after September 1, 2017. To determine if a vehicle is affected by this Recall, log in to the Autocar Warranty Management System at www.autocartruck.com. From the main menu, select “View Recalls/Service Programs” and look for the Autocar recall number above. An excel file will be accessible with the VIN list of affected vehicles. Alternatively, to determine if a single vehicle is affected, select “VIN Profile” from the main menu in the Autocar Warranty Management System. In the “Chassis Number” field, enter the last 6 of the VIN. Once the VIN profile is displayed, scroll down to the “Recall/Service Program Information” section to determine if the Recall is open.
SERVICE RESPONSIBILITY:
Service sites must perform this recall on affected vehicles at no charge to the owner regardless of vehicle mileage, age, or ownership. If a vehicle affected by this recall is taken into or is currently in your vehicle inventory, or at your center for service, you must perform this Recall before the vehicle is sold or released to the owner.
REQUIRED PARTS:
Cable ties (obtain locally).
CLAIM CODING INFORMATION:
| Repair Number (Op Code) | Time Allowance (SRT) | Description |
| 85208-0-28 | .60 HR | Seat Belt Wiring Harness |
SAFETY NOTICES:
WARNING
Allow the vehicle’s engine and cooling system to cool to ambient temperature before performing the repair procedure. A hot engine or cooling assembly may cause burns or other personal injury.
WARNING
Never rely on the hydraulic pressure to hold the cab in an open position. Always use the safety pin in the cab tilt lock tube to prevent serious personal injury or death.
WARNING
To prevent eye injury, always wear eye protection when performing vehicle maintenance, service or inspection.
WARNING
Before working on a vehicle, set the parking brake, place the transmission in neutral and block the wheels. Failure to do so can result in unexpected vehicle movement and can cause serious personal injury or death.
Working on CNG/LNG Trucks
SAFETY INSTRUCTIONS
If you store or dispense Compressed Natural Gas (CNG) or Liquefied Natural Gas (LNG), or if you work on CNG or LNG trucks, your location must be fully compliant with applicable codes, regulations and standards, including National Fire Protection Associate (NFPA) codes, Society of Automotive Engineers (SAE) standards, American National Standards Institute (ANSI) Natural Gas Vehicle (NGV) standards, the United States Code of Federal Regulations (CFR) and your state and local fire and other applicable codes (including, for example, the California Code of Regulations and the Texas Administrative Code).
Contact your local fire department for guidance and additional compliance information.
Technicians working on Autocar trucks with CNG or LNG engines must be trained in the proper repair of CNG and LNG trucks and engines and the safe storage and dispensing of CNG and LNG.
Working on CNG Fuel Systems
WARNING
CNG fuel systems include a high pressure (3600 psi) system for fuel storage and a low pressure system (125 psi) for consumption by the engine. Understanding the characteristics of CNG and how the fuel system works will prevent injury and damage to persons and property.
Attempting to operate or maintain any CNG fuel system without proper training is dangerous. Complete training and consult instructional bulletins from the CNG system suppliers, such as Agility Fuel Systems’ Field Service Bulletin, Safely Working on CNG Fuel Systems.
Welding and Hot Work Near CNG and LNG Trucks
WARNING
Welding, grinding, and other “hot work” can be safely performed on or near a CNG or LNG vehicle, but certain precautions must be followed. Understand and perform the necessary precautions provided by the CNG system suppliers, such as Agility Fuel Systems’ Field Service Bulletin, Welding and Hot Work Precautions Near CNG and LNG Vehicles.
CNG Cylinders
WARNING
CNG fuel containers must meet Federal Motor Vehicle Safety Standard (FMVSS) 304 (Compressed Natural Gas Fuel Container Integrity) and/or ANSI/CSA NGV2 (Basic Requirements for Compressed Natural Gas Vehicle Fuel Containers). Both standards specify a detailed visual examination every three years.
Truck owners are required to complete all necessary inspections, in accordance with the applicable standards and other resources, such as the Clean Vehicle Education Foundation and NGVAmerica’s Compressed Natural Gas (CNG) Container Visual Inspection Advisory.
FMVSS 304 also requires that cylinders not be used after the end of life (EOL) date provided on the tank label. The EOL date is also displayed in the engine compartment and at the fueling connection of each truck. If there are any question as to proper decommissioning of a cylinder, contact the manufacturer, whose name and address is also required to be on the label.
CNG Fuel Container Pressure Relief Devices (PRDs)
WARNING
PRDs must be properly maintained and positioned for safe operation of a CNG fuel system. Missing vent caps can allow moisture into PRDs and vent lines, which can freeze and damage these safety components. Debris which clogs the PRDs and/or vent lines can prevent proper function.
PRDs must be positioned to vent upward, not outward, from a vehicle.
Ensure that every truck owner completes periodic inspections of the PRDs and vent lines and systems, in accordance with guidance provided by the system component suppliers.
Alert First Responders to CNG and LNG
DANGER
In the event of a fire or other emergency, alert first responders to the presence and location of CNG fuel systems, tanks and dispensers. Ensure that emergency personnel are aware of proper precautions, such as those provided in Agility’s First Responder Guide: CNG and LNG Vehicle Fuel Systems.
LOCKOUT/TAGOUT PROCEDURES:
CAUTION
Before entering the vehicle or vehicle body, read and follow OSHA regulations concerning entry and working in “CONFINED SPACE” OSHA 1910.146 and “LOCKOUT/TAGOUT” OSHA 1910.147. Follow OSHA regulations while performing any work on the vehicle. The vehicle must be disabled by the following steps before performing any work on the vehicle:
1. Place the transmission in NEUTRAL.
2. Set the parking brake.
3. Shut the engine OFF.
4. Lock cab doors, keep the key in your Block the wheels before entering the body or performing any work on the vehicle.
5. Turn the battery disconnect switch OFF, if equipped.
6. Completely drain the air from the primary/A system and secondary/B system by opening the drain valves on the air tanks themselves or by using the drain manifold if supplied. When draining the air tanks, do not look into the area where air is Dirt or sludge particles may be expelled in the air stream and can cause eye injury.
7. Place magnetic “DANGER” signs on both cab doors before entering the body or performing any work on the vehicle.
8. Take proper precautions before working under the vehicle. Use ramps approved for the weight of your vehicle, or use floor jacks and Never work under a vehicle supported by jacks alone. Always use jack stands to support the vehicle.
The following work instructions are divided into three sections as follows:
Section I is applicable to left drive and dual drive sit-down suspension seating applications.
Section II is applicable to right drive and dual drive sit-down suspension seating applications.
Section Ill includes functional tests to be performed to verify seat belt warning function.
Section I
Left and dual drive sit-down suspension seating.
1. Follow all lockout/tagout procedures and verify the battery disconnect switch is in the “OFF” If the unit is not equipped with a battery disconnect switch, disconnect the battery cables beginning with the negative cables, follow by the positive cables.
2. Unlock and open the left door.
3. Locate the seat belt wiring harness and inspect for any chafing or damage (see Figures 1 and 2).
Note: If any chafing or damage is found, please contact Autocar Technical Support at 888- 218-3611 for further instructions.
4. After any repairs are completed or if no damage is found, verify the routing of the seat belt wiring harness is as indicated or route and secure the seat belt wiring harness as indicated using cable ties obtained locally (see Figure 2).
5. For left drive units proceed to Section III.
Section II
Right drive and dual drive sit-down suspension seating.
1. Unlock and open the right door.
2. Locate the seat belt wiring harness and inspect for any chafing or damage (see Figures 3 and 4).
Note: If any chafing or damage is found, please contact Autocar Technical Support at 888- 218-3611 for further instructions.
3. After any repairs are completed or if no damage is found, verify the routing of the seat belt wiring harness is as indicated or route and secure the seat belt wiring harness as indicated using cable ties obtained locally (see Figure 4).
4. Proceed to Section III.
Section III
Perform a functional test of the seat belt warning system.
1. Verify the battery disconnect switch is in the “ON” Or, if previously disconnected, reconnect the battery cables beginning with the positive connections followed by the negative connections.
2. For single drive position units (left or right): From the driver position, cycle the key switch to the on position (key on engine off) and observe the seat belt warning telltale. With the seat belt un-latched the telltale should be illuminated (see Figure 5).
3. Latch the seat belt and observe the seat belt warning With the seat belt latched, the telltale should no longer be illuminated. If the functional test passes, proceed to step 7. If the functional test fails, please contact Autocar technical support at 888-218-3611 for further diagnostic instructions.
Note: Steps 4 through 6 are applicable to dual drive dual sit-down suspension seating units.
4. For dual drive position units: From either driver position, verify the drive mode switch is selected for the seating position to be tested, cycle the key switch to the on position (key on engine off) and observe the seat belt warning telltale. With the seat belt un-latched the telltale should be illuminated (see Figures 6 and 7).
5. Latch the seat belt and observe the seat belt warning telltale. With the seat belt latched, the telltale should no longer be illuminated.
6. Repeat steps 4 and 5 for the opposite drive position. If the functional test fails, please contact Autocar technical support at 888-218-3611 for further diagnostic instructions.
7. If the functional tests pass, repairs are complete.
Note: If you have questions or concerns regarding this Recall, please contact Autocar technical support at 888-218-3611.
Autocar, LLC
4680 Pinson Valley Parkway
Center Point, AL 35215
888-218-3611
IMPORTANT SAFETY RECALL
This notice applies to your vehicle(s) with the VIN(s) indicated on the enclosed owner response cards.
AUTOCAR, LLC SAFETY RECALL ACX-2101
NHTSA RECALL 21V030
March 2021
Dear Autocar Truck Owner:
This notice is being sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Autocar, LLC has determined that a defect, which relates to motor vehicle safety, exists in 3196, 2018-2021 model year Xpeditor chassis manufactured between September 9, 2017 and July 28, 2020 with non-sequential serial numbers between 224486 and 234305. Our records indicate that your vehicle was manufactured within this time period and may contain the defect described herein.
MODELS AFFECTED:
Autocar Xpeditor MY 2018-2021
COMPONENTS AFFECTED:
Seat Belt Wiring Harness May Chafe
SAFETY DEFECTS AND POTENTIAL RISKS:
The seat belt wiring harness routing may be too close to the seat mechanism, if the harness becomes chafed and short circuits, the circuit protection fuse will open, the engine will shut off and not restart, increasing the risk of a crash, personal injury or property damage.
REPAIR REQUIRED:
The seat belt wiring will be routed and secured clear of the seat mechanism.
TIME REQUIRED FOR THE REPAIR:
The labor time to repair your vehicle is .60 hour.
WHAT YOU SHOULD DO:
To have your vehicle repaired, contact your local authorized Autocar service site or email warranty@autocartruck.com.
PRIOR REPAIRS:
If you have previously paid for repairs relating to this recall you may be entitled to recover the amount you paid for those repairs. Submit a copy of all documentation supporting your claim to Autocar at the address set forth below in the “Assistance” section.
NOTICE REGARDING LEASED VEHICLES:
If you are a Lessor (as defined below) of a vehicle that is affected by this notice, you are obligated under federal law to provide a copy of this Notice to the lessee of such vehicle within 10 days of your receipt of this Notice. Further, you must maintain a record, which identifies the lessee(s) to whom you send a copy of this Notice, the date you send the Notice and the VIN of the vehicle that you have leased to the lessee(s).
For purposes of this Notice, the term “Lessor” means a person or entity that is the owner, as reflected on the vehicle’s title, of any five or more leased vehicles, as of the date of this Notice.
OWNER RECALL RESPONSE CARD:
The enclosed Owner Recall Response Card identifies your vehicle. Please complete this postage-paid card and return it to Autocar. If you do not own, have sold or have traded the vehicle identified on the card, please indicate that on the postage-paid card and return it to Autocar.
ASSISTANCE:
If you need assistance with this recall, call our toll-free numbers below or write to Autocar at:
Autocar, LLC
Service & Warranty Departments
551 S. Washington St.
Hagerstown, Indiana 47346
888-218-3611 (Toll Free)
877-973-3486 (Toll Free)
You may also submit a complaint to:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey Avenue SE
Washington, DC 20590
or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 800-424-9153); or go to https://www.safercar.gov.
We regret any inconvenience this recall may cause, but we hope you recognize Autocar’s concern for your safety and satisfaction with your vehicle.
Sincerely,
AUTOCAR, LLC
IMPORTANT SAFETY RECALL
AUTOCAR, LLC SAFETY RECALL ACX-2101
NHTSA RECALL NO. 21V030
March 2021
TO: U.S. Distributors
Dealer Principals, Service Managers, Warranty Managers, Parts Managers
This notice is being sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Autocar, LLC has determined that a defect, which relates to motor vehicle safety, exists in 3196, 2018-2021 model year Xpeditor chassis manufactured between September 9, 2017 and July 28, 2020 with non-sequential serial numbers between 224486 and 234305 accordingly, a recall to address this issue is being initiated effective March 25, 2021.
MODELS AFFECTED:
Autocar Xpeditor MY 2018-2021
COMPONENTS AFFECTED:
Seat Belt Wiring Harness May Chafe
SAFETY DEFECTS AND POTENTIAL RISKS:
The seat belt wiring harness routing may be too close to the seat mechanism, if the harness becomes chafed and short circuits, the circuit protection fuse will open, the engine will shut off and not restart, increasing the risk of a crash, personal injury or property damage.
REPAIR REQUIRED:
The seat belt wiring will be routed and secured clear of the seat mechanism at no charge to the owner.
REPAIR AVAILABLE:
VIN profiles in the Autocar Warranty System will be updated to show the open recall on March 25, 2021 and a spreadsheet of the affected VINs will be available in the Warranty system.
REMINDER:
It is a violation of Federal law to sell or lease a vehicle covered by this recall notice unless the recall remedy has been completed. Substantial civil penalties apply to violations of this law.
If you have any questions or concerns, please contact the Autocar Warranty Department at warranty@autocartruck.com.
Sincerely,
AUTOCAR, LLC
ACF 00002 Rev. 000
551South Washington Street, Hagerstown, IN 47346 Office: 765.489.5499 Fax: 765.489.5230
SEOCONTENT-START
General Recall Reimbursement Plan
I. Introduction
Pursuant to 49 U.S.C. 30120(d), 49 C.F.R. Parts 573 and 577, and other applicable requirements, Autocar, LLC and Autocar Industries, LLC (collectively “Autocar”) hereby provides the National Highway Traffic Safety Administration (“NHTSA”) its general reimbursement plan for the cost of remedies paid for by vehicle owners before they are notified of a related safety recall.
As set forth at 49 C.F.R. and 49 C.F.R 573.13, the following information sets forth Autocar’s general plan to reimburse owners and purchasers for costs incurred for remedies in advance of notification of potential safety-related defects or noncompliance.
II. Reimbursement Notification
Autocar’s notice to a vehicle owner in accordance with 49 C.F.R. Part 577 will indicate whether Autocar is offering a refund. A vehicle owner will be eligible for reimbursement if the owner paid to have service to remedy the defect or noncompliance prior to a specified ending date.
As set forth at 49 C.F.R 573.13(c)(2), the ending date shall be 10 calendar days after the date on which Autocar mailed the last of its Part 577 notifications to owners in the United States, unless a specific reimbursement plan is made available for a particular recall.
Autocar’s notice will instruct owners to seek eligible reimbursement through Autocar’s Service & Warranties Department, at the following address or otherwise applicable business address:
Autocar LLC
Service & Warranties Department
551 S. Washington Street
Hagerstown, Indiana 47346
Owners will also be instructed that they may contact Autocar by telephone (toll free) at 888-218-3611 or 877-973-3486 NHTSA’s regulations (see 49 C.F.R. 573.13(c)) permit Autocar to identify a beginning date for reimbursement eligibility. Accordingly, an owner who paid to remedy the defect or noncompliance prior to the identified beginning date would not be eligible for reimbursement. Autocar puts its owners and customers first, and therefore, the company has generally has not firmly established such a beginning date for reimbursement eligibility, and as of the date of this policy, does not presently anticipate changing this general policy.
Should Autocar determine (as NHTSA permits) that a beginning date is appropriate, Autocar will indicate that date in the specific reimbursement plan for that particular recall. As permitted by 49 C.F.R. 577.11 (e), Autocar may not include a reimbursement notification when all vehicles are well within the warranty period, subject to approval by NHTSA.
III. Costs to be Reimbursed
For vehicles, reimbursement will not be less than the lesser of:
- The amount paid by the owner for the remedy that specifically addressed and was reasonably necessary to correct the defect or noncompliance that is the subject of the recall; or,
- The costs of the part(s) for the remedy (to be no more than the manufacturer’s list retail price for authorized part(s)), plus associated labor at local labor rates, miscellaneous fees (such as disposal Of waste), and taxes.
For replacement equipment, reimbursement will be the amount paid by the owner for each replacement item (limited to the amount of the retail list price of each defective or noncompliant item that was replaced, plus taxes, where the brand or model purchased by the owner was different than the brand or model that was subject to the recall). If the item of motor vehicle equipment was repaired, the reimbursement provisions identified above for vehicles will apply.
As set forth at 49 C .F .R. 573.13(d)( I j, costs incurred by the owner within the period during which Autocar’ s original or extended warranty would have provided for a free repair of the defect or noncompliance will not be eligible for reimbursement.
IV. Entity Authorized to Provide Reimbursement
Autocar will directly reimburse owners, unless a specific reimbursement plan is made available for a particular recall, and will encourage owners to pursue requests for reimbursement directly through its Service & Warranties Department to expedite reimbursement, as set forth above in Section Il. In whatever manner the request for reimbursement is made, under this Plan or a specific reimbu13ement plan, the owner Will be directed to submit the required documentation, upon which reimbursement eligibility Will be determined.
V. Required Documentation
The reimbursement determination will depend upon the information provided by the owner.
set forth at 49 C.F.R. Part 573.13(d)(4), the owner must submit all of the following information:
- Claimant’s name and mailing address;
- For motor vehicles, the vehicle identification number (or ‘VIN”), vehicle make, model, and model year;
- For replacement equipment, a description of such equipment or, for tires, the model and size;
- Identification of the applicable recalled (either Autocar’s recall number, or NHTSA’s applicable recall campaign number);
- Identification Of the owner Of the recalled vehicle at the time that the pre-notification remedy was obtained;
- An original receipt for the pre-notification remedy that includes a breakdown Of the amount for parts, labor, other costs and taxes, including costs for the replacement item. Where the receipt covers work other than to address the recall or noncompliance, Autocar may require the claimant to separately identify costs that are eligible for reimbursement.
- If the remedy was obtained during the warranty period, documentation indicating that the warranty was not honored or that the warranty repair did not correct the problem related to the recall.
Failure to submit all of the above information may result in denial of the reimbursement request.
VI. Additional Information
The Part 577 required owner notice will provide a toll-free telephone number through which specific information about the reimbursement plan can be requested from Autocar.
As set forth at 49 C.F.R. 573.6, this general reimbu1Nment plan will be incorporated into notifications by reference. Information specific to a particular recall also may be incorporated into the Part 573.6 notification.
VII. Response Requests Reimbursement
Autocar will act upon requests for reimbursement as follows:
- Autocar will act upon a claim for reimbursement within 60 days of its receipt. If Autocar denies the claim, Autocar will send a notice to the claimant within 60 days of receipt of the claim that includes a clear, concise Statement of the reasons for the denial.
- If a claim for reimbursement is incomplete When originally submitted, Autocar Will advise the claimant within 60 days of receipt of the claim of the documentation that is needed and offer an opportunity to resubmit the claim with complete documentation.
Reimbursement shall be in the form of a check from Autocar.
VIII. Miscellaneous
Autocar Will make a COPY or this plan available to the public, upon request.
As permitted by 49 Autocar will not reimburse owners for recalls based solely on noncompliant or defective labels.
As set forth at 49 C .R. 573.13(n), reimbursement for a pre-notification remedy will not be provided to an owner if, in the case of a motor vehicle or replacement equipment other than a tire, it was bought by the first purchaser more than 15 calendar years before notice is given under 49 U S.C. 30118(c) or an order is issued under section 49 U.S.C. 30118(b). In the case Of a tire, this period shall be 5 calendar years.
Dated: June 1, 2020
SEOCONTENT-END
4 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| AUTOCAR | XPEDITOR | 2018-2021 |
11 Associated Documents
Recall Quarterly Report #2, 2021-2
RCLQRT-21V030-3819.PDF 211.232KB
Loading...
Reload document 
Open in new tab
Manufacturer Notices(to Dealers,etc)
RCMN-21V030-6216.pdf 107.149KB
Loading...
Remedy Instructions and TSB
RCRIT-21V030-3008.pdf 5054.27KB
Loading...
Defect Notice 573 Report
RCLRPT-21V030-1557.PDF 215.195KB
Loading...
ISSUED Owner Notification Letter(Part 577)
RCONL-21V030-2006.pdf 164.403KB
Loading...
Safety Bulletin
RCSB-21V030-3363.pdf 5054.27KB
Loading...
Recall Acknowledgement
RCAK-21V030-4530.pdf 645.818KB
Loading...
Manufacturer Reimbursement Plan
RMRP-21V030-3235.pdf 613.304KB
Loading...
Recall Quarterly Report #1, 2021-1
RCLQRT-21V030-1306.PDF 211.132KB
Loading...
Recall Quarterly Report #3, 2021-3
RCLQRT-21V030-3977.PDF 211.32KB
Loading...
Recall Quarterly Report #4, 2021-4
RCLQRT-21V030-5572.PDF 211.435KB
Loading...
Latest Recalls Documents
- [Easy to Use--Work out of box] + [FOXWELL 2025 New Version] FOXWELL NT604 Elite scan tool is the 2025 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs
srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first. - [Affordable] + [Reliable Car Health Monitor] Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the warning light car after the problem is fixed.๐TIPS: Airbag crash/collision data can NOT be cleared even you replace the new airbag.
- [5 in 1 Diagnostic Scanner] Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When itโs an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance function.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You donโt need to pay extra software fee.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you donโt need to pay extra money to buy a solid toolbox.
- [Pro OBD2 Scanner] - BlueDriver is the easiest way to scan and understand your vehicle like a professional mechanic. Read and clear your carโs trouble codes and check engine light.
- [Read & Clear All The Codes] - BlueDriver's enhanced vehicle diagnostics gives you access to information normally available only to mechanics on their OBD2 scan tools. Now you can read and clear ABS, Airbag, SRS, TPMS codes, and many more.
- [Get The Right Fix & View Live Data] - Much more than a car code reader, BlueDriver is a diagnostic tool. Youโll get unlimited repair reports with possible causes and fixes, plus real-time health monitoring while you drive with the live data feature.
- [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
- [User-Friendly App and Repair Videos] - BlueDriver gives you more ways to scan and fix your vehicle. Our iOS & Android app connects you to a large database of repair videos with step-by-step directions of repairs.
- [Brand-New ArtiDiag500] We've got everything you're looking for! Forget basic OBD2 scanners; TOPDON's ArtiDiag500 car scanner offers more. The all-new ArtiDiag500 not only includes full OBD2 functions and 4-system diagnostics but also provides DIYers with 6 maintenance services. The brand-new, cost effective AD500 is back in full swing!
- [4-System Diagnostics] DIY enthusiasts, take notice! Will these 4-system diagnostics be the treasure you've been seeking? The ArtiDiag500 code reader offers in-depth testing for the engine, transmission, ABS, and SRS systems, reading fault codes and data streams. It also visualizes real-time data in chart form, simplifying complex data for storage and future playback, aiding DIY users in problem detection.
- [6 Reset Functions] Hey, hang tight for a moment. With these 6 reset functions, the ArtiDiag500 has got you covered. It offers throttle adaptation along with reset capabilities for Oil, SAS, TPMS, BMS, and EPB. Seamlessly aligning the throttle, battery, tires, and brake pads with your vehicle, it also adjusts the steering angle and turns off the oil light. Looking to restore your car to its original condition? Look no further than the ArtiDiag500.
- [Multiple Functions] The Smart AutoVIN of this TOPDON OBD2 scanner keeps track of your manual selections for vehicle make, model, and year and directs you to the suitable diagnostics. Max 4 Live Data streams integrated for much easier data processing. Diagnostic feedback online with this diagnostic tool to help you get tough repair operations well-completed. Real-time car battery voltage monitoring identifies probable vehicle defects.
- [Global Support] Rest assured about compatibility with your vehicle and language โ ArtiDiag500 currently supports 67+ car brands, 10,000+ models, covering most vehicles worldwide, and is available in 12 languages. Whether it's for your car or preferred language, there's an ideal choice for you. Plus, it's fully compatible with Android 11 for smoother use.
- [ABS Diagnosis] - Quickly identify and resolve ABS-related issues, including sensor faults (such as wheel speed sensors), wiring problems (faulty circuits or connectors within the ABS system), or ABS pump failures (malfunctions in the ECU controlling the ABS). Ensure proper system operation, restore optimal braking performance, and clear any warning lights.
- [SRS Diagnosis] - Quickly detect the airbag ECU itself, airbag sensor failure, airbag system plug disconnection or poor contact, seat belt sensor failure, or system error, etc, to ensure that the SRS (Supplemental Restraint system) is working properly. After repair, reset the system to clear the warning light and restore full safety performance. NOTE: It cannot reset Airbag crash or transmission codes.
- [Full OBD2 Function] - Read and clear trouble codes for all OBD2 systems, including show real-time data, freeze frame data, I/M Readiness, DTC lookup, test results for o-xygen sensor, On-board monitor test, request vehicle information, component test, modules present and e-vap test. Allowing you to quickly identify and troubleshoot vehicle issues.
- [AutoVIN Technology] - It simplifies diagnostics by automatically identifying the vehicleโs model and configuration, eliminating the need for manual input, and ensures accurate diagnostics by applying the correct data and algorithms, reducing errors caused by manual entry. Improves efficiency and streamlines the diagnostic process.
- [ABS Auto Bleeding] - Helps bleed your vehicle's Anti-lock Braking System (ABS), removing air from the brake lines to ensure optimal brake performance. It helps prevent brake issues such as spongy pedals, inconsistent braking, and reduced stopping power, and enhances vehicle safety by ensuring the ABS system is working properly, especially during critical driving situations. NOTE: Itโs not compatible with vehicles that only support manual bleeding.
- ใUPGRADE OF NT604-POWERFUL 5 RESETSใWanna to do maintenance service for your car however the basic 4 system scanner tool can't do it? Then FOXWELL NT614 Elite-the upgraded version of nt604, was born for providing you with 5 special functions-ABS Bleeding/Oil Reset/SAS Calibration/EPB Reset/Throttle Reset. These functions are enough for your daily needs. No need to buy those 300-600 dollors obd2 scanner. Saving your unnecessary repair fee with FOXWELL nt614 car scanner diagnostic tool!
- ใENGINE/ABS/SRS/TRANSMISSION CODE READERใDon't know what's wrong with your car when the warning light of ABS, transmission, SRS, Engine flashes? NT614 Elite obd2 scanner can pinpoint the problem components. It boasts many functions of engine, abs, srs and transmission such as read & erase fault codes and grapgh live data like engine temp, wheel speed sensor, read transmission temperature, etc. Compared with car repairs, using foxwell nt614 elite is more convenient and a-ffordable.
- ใBest Bang For Your Buck!-FOXWELL NT614 Eliteใ1. 2025 New software-faster than old one. 2. One click lifetime WIFI f-ree update, no need to use the annoying Micro SD card. 3. New Update-No need to register on the FOXWELL website before use, more convenient! 4. More intuitive viewing with new interface, you can find I/M, Battery Test, DTC Lookup directly.
- ใABS BLEEDING OBD SCANNERใDo you always feel the brake pedal was slowly sinking to floor or it's loose after doing a complete front & rear brake job? And then you need to take more time than normal to stop your car, which is very dangerous. That's because when you open the brake system to replace components, air gets inside. To get a firm brake pedal, the air need to be removed by bleeding the brakes. NT614 Elite odb2 scanner can do ABS BLEEDING perfectly for your cars.
- ใSMART AUTOVIN & LIFETIME F-REE WIFI UPDATE & PERFECT GIFT CHOICEใWith the fantastic AUTOVIN function, this nt614 scan tool can get your VIN and vehicle info rapidly. No need to spend much time in finding your VIN and input it one by one. Also, the lifetime f-ree wifi update is provided for more vehicle coverage, bug fixes, newly added parameters. SAVE AT LEAST 1000+ PER YEAR. And this automotive scanner is a best gift for your Dad, Husband, Boyfriend and Handy Men.
- Updated New Version AD600S: Discover the improved version of TOPDON AD600S OBD2 scanner. Now immerse yourself in a seamlessly diagnostic experience with Android 11.0 OS. With an upgraded 32G ROM, this scan tool offers ample storage and faster performance. The 5-inch display with 1280x720 resolution offers high-definition clarity, ensuring easy readability for every diagnostic detail
- Professional 4 Systems Diagnostics: For car owners dealing with common issues such as engine, transmission, ABS, and SRS, the TOPDON AD600S code scanner delivers professional diagnostic services. It easily reads and clears fault codes, analyzes data streams and more, ensuring a quick identification of problems. Additionally, the DTC Lookup function provides corresponding fault code analysis
- 9 Hot Reset Functions: Say goodbye to costly trips to the repair shop for resetting after routine maintenance such as changing oil, replacing tires, or installing new brake pads. The AD600S diagnostic tool effortlessly tackles common automotive challenges with just one click. Cut costs and cut the hassle with its 9 reset functions: Oil/BMS/ABS/SAS/EPB/DPF/TPMS/Throttle/injector coding
- Support for 10,000+ Car Models: The upgraded AD600S car scanner now supports 67+ global brands and 10,000+ models, ensuring compatibility with a diverse range of vehicles. Whether American, German, French, or Japanese, the AD600S diagnostic scanner has you covered. (Note: Contact TOPDON customer service for vehicle compatibility inquiries before purchase)
- Life time Free Updates: The AD600S diagnostic tool offers free upgrades with convenient one-click updates via Wi-Fi. Our dedicated TOPDON technical team continuously enhances our product's software, providing users with expanded vehicle support and an improved user experience through regular updates
- Pro-level ABS SRS OBD2 Scanner - Based on the NT301 FOXWELL Scanner, this car scanner takes OBD-II diagnostics to the next level by in-depth insights on reading ABS SRS Diagnostic Trouble Codes, display the Live Data: Wheel Speed Sensor, Airbag Issues, Wiring Faults, clear the ABS error codes after the car faults repaired, etc... NOTE: This code reader can only read SRS codes but CANNOT reset any Airbag crash codes. Please check the functions coverage BEFORE purchasing. NO Need to Register &Subscription.
- Full-Feature ABS Diagnostics - Real-time tracking of wheel speed sensor, brake force distribution, and brake pressure with dynamic graphs for easy analysis. Effortlessly read ABS trouble codes and access freeze frame data to identify and resolve system issues. This ABS scanner diagnostic tool also monitors ABS performance during emergency braking or on slippery surfaces, providing alerts for potential problems.
- Basic OBDII Scanner Functions - This obd2 scanner diagnostic tool also can Check Engine Fault Light, diagnose OBD-II modules instantly, display the Live Data with graph (engine RPM, coolant temperature, fuel trim, and sensor readings), locate bad sensors and indicate I/M readiness status before the annual inspection. Reducing the potential driving risk and keep a peak performance on the road.
- Top ABS Bleed Scan Tool - After replacing the ABS pump or adding brake fluid, air can enter the ABS module, causing the pedal to feel weak or slow to return. This OBD2 scanner with ABS auto bleed will restore your brake pedalโs firmness by efficiently removing air from the ABS module. For vehicle coverage, check the FOXWELL Diagnostic Coverage List under Support on the official site. NOTE: This feature is NOT compatible with vehicles that support manual bleed.
- User-Friendly & Budget-Friendly - Enjoy software updates without subscription for newer vehicle models(Any more issues about update, please let us know๏ผ. This car code reader comes with a sturdy case for easy carrying. The code reader for cars will also save diagnostic data to avoid unnecessary diagnostic costs when you must to find the professional mechanic to fix the car faults instead of addressing them by yourself.
- [Transform Your Car Care Experience] - With BLCKTEC, instantly become your own professional mechanic. Effortlessly read and clear your carโs trouble codes and check engine light, ensuring your vehicle stays in top condition.
- [Empower Yourself with Comprehensive Diagnostics] - Unlock the full potential of your vehicle with the BLCKTEC 430. Access detailed diagnostics previously exclusive to professional mechanicsโ OBD2 scan tools, including ABS, Airbag, SRS, TPMS codes, and beyond, right at your fingertips.
- [Drive with Confidence] - The BLCKTEC 430 is more than just a car code reader; it's your personal vehicle health advisor. Receive tailored repair reports with potential causes and verified solutions for your specific make and model, guiding you to the right fix every time.
- [Seamless Connectivity, Ultimate Convenience] - Experience the freedom of wireless diagnostics with this portable car scanner. Easily connect via Bluetooth to our intuitive sensor and enjoy all the functionalities of high-end scan tools without the clutter of wires, directly from your smartphone or tablet. To connect the tool to the App, please DO NOT go to device's Bluetooth settings, instead, open RepairSolutions2 App and follow the instructions on the App to pair the BLCKTEC 430.
- [DIY Repairs Made Easy] - Navigate car maintenance with ease using our premium app. Access a vast library of easy-to-follow repair videos, guiding you through each step of the repair process, compatible with both iOS & Android devices.
- ใGreat Ideal For Every Car OwnerใPrefect choice for your father, husband, brother or boyfriend. EVERY CAR OWNER WILL NEED IT! Also, the lifetime update is provided for more vehicle coverage, bug fixes. SAVE AT LEAST $1000+ PER YEAR!Get LAUNCH CRP123 V2.0 Elite car diagnostic scanner and give your lover a surprise!*R each us to Get the Extra Gifts :Protective Case Storage Bag.
- ใ2025 Newly Added 3 Reset FunctionsใCRP123 V2.0 obd2 scanner with upgrades it offers Throttle Adaptation,Oil Reset and SAS Reset functions for FREE now!! Optimize your engine performance with Throttle Adaptation, reset your oil life system with ease to save time and money on maintenance, and enhance your vehicle's handling and safety with SAS Reset.Covering more daily repairs,become the most cost-effective product in its price range,save your time and money!
- ใ Read & Clear/Reset Engine/ABS/SRS/Transmission Diagnostic Scan Tool ใLAUNCH CRP123 V2.0 OBD2 Scanner can test Engine, Transmission, ABS and Airbag four systems, also reads and resets code, displays data stream graphic, stores and playbacks dynamic data stream,helps to quick analysis and diagnosis.
- ใ Error Fault Code ReaderใExcept the full 10 modes OBD2 diagnostic functions like, retrieving I/M readiness, Freeze Frame Data, Read Dynamic Data stream and V-ehicle Information, O2 Sensor Test, EVAP Test of F-uel Tank System (Mode 8) and Advanced On-board Monitoring (Mode 6), launch crp123 v2.0 obd2 scanner can not only reveal what error codes your car is producing, but also erase your v-ehicleโs check engine light after problem fixed, the DTC help and explanation also tell you the exact problem.
- ใ Live Data Graphing + Read/Record/Playback Data stream + Print diagnostic data ใLive Data Graphing,more intuitive to know your vehicleโs problem.Large size Color Screen ;Print Function:Print the diagnose result easily; with user manual and register & update tutorial video uploaded in the link by us,you can Look up it anytime by ONE-CLICK.
- MAINTAIN PEAK PERFORMANCE AND SAFETY ON THE ROAD - Easily find and fix the problem with your vehicle using the INNOVA 5610 bidirectional scan tool. This OBD2 scanner diagnostic tool provides real-time solutions to troubleshoot issues. Access OBD2 and OEM live data with ease, making it an essential car scanner diagnostic tool. Perfect for those seeking reliable car diagnostic scanner and code readers & scan tools for all vehicles.
- PRO-LEVEL FUNCTIONALITIES - Use the INNOVA 5610โs Enhanced Data Stream to view live data for advanced systems like ABS, SRS, transmission, and engine. The Special Reset Function lets you use dealership-level re-learn procedures. This car diagnostic scanner is ideal for those needing a bidirectional scan tool or mechanic tools automotive for professional repairs. Compatible with select vehicle makes and models; not universal.
- COMMAND WITH BIDIRECTIONAL CONTROLS - The INNOVA 5610 bidirectional scan tool sends commands to test functions such as fuel pump on/off or retracting the electronic parking brake. With this car scanner diagnostic for all cars, you can operate like a pro. Ideal for those seeking a car code reader and reset tool or advanced fixd car diagnostic tool capabilities. Compatible with select vehicle makes and models; not universal.
- EASY TO USE - The INNOVA 5610 OBD2 scanner diagnostic tool supports English, Spanish, and French. Easily use this scanner for car on most 1996 - 2023 (2024 coming soon) OBD2 vehicles to verify repairs. Designed for ease of operation, itโs a dependable code reader for cars and trucks and check engine code reader. To confirm vehicle coverage, please utilize Innova's Coverage Checker.
- BUY AND DRIVE WITH CONFIDENCE - Backed by ASE-Certified support, this car scanner pairs with the RepairSolutions2 app, trusted by 3.4M users, for wireless OBD scanner functionality. With free updates and no subscription fees, this durable car computer diagnostic reader ensures youโre prepared for any repair. A must-have diagnostic scanner for all vehicles.
Last update on 2025-04-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.