“This site contains affiliate links for which OEMDTC may be compensated” |
FIELD CAMPAIGN
SERVICE BULLETIN #
SVC2020-083
DATE:
18 June 2020
1. IK01, IK03: Order one of these kit versions which includes English Supplemental Operator’s and Maintenance Manual for machines located in the United States, Canada (except for Quebec), Australia, New Zealand, and other English-speaking global regions.
2. IK02, IK04: Order one of these kit versions which includes English + translated Supplemental Operator’s and Maintenance Manuals for machines located in other global regions.
These Service Bulletins provided instructions for:
1. Destruction of dealer inventory for affected part numbers:
2. Install temporary solution (Assembly PN 163769457) on units that could not maintain torque and/or tire pressure.
3. Owner notifications to inspect each wheel to determine if supplier wheels were installed and to notify Vermeer Corporation of the inspection results.
POSSIBLE LOSS OF WHEEL AND RISK OF CRASH
Specific wheels (steel rim) with bolt pattern 8 on 6½ inch (165.1 mm) circle to be used with 5/8” studs provided by a supplier:
- have an incorrect lug nut contact area causing wheel lug nuts to loosen; and/or
- can develop possible cracks causing the tire to lose air pressure.
DEATH OR SERIOUS INJURY POSSIBLE
Both conditions may increase the risk of wheel loss and the risk of a crash. Death or serious injury is possible. Property damage may also occur.
Solution:
IMMEDIATE MACHINE MODIFICATIONS REQUIRED
IK00-3922 has been created to provide the necessary parts and instructions to replace the wheel and tire assembly, install a new safety sign (shown at right), install a new wheel/tire specification placard decal and provide a Supplemental Operator’s and Maintenance Manual.
Please be reminded that it is a violation of Federal law for you to sell or lease the machines covered by this notification until this recall has been performed on these machines. Substantial civil penalties apply to violations of this law.
a. IK01-3922: Includes wheels, tires, safety sign, wheel/tire specification placard decal, English supplemental manual
b. IK02-3922: Includes wheels, tires, safety sign, wheel/tire specification placard decal, English + translated supplemental manual
SEOCONTENT-START
Vermeer and the Vermeer
logo are trademarks of Vermeer
Manufacturing Company in the U.S and/or other
countries. Vermeer Corporation. All Rights Reserved.
Page 1 of 28
Vermeer Corporation
Environmental
Pella, IA 50219 USA
FIELD CAMPAIGN
SERVICE BULLETIN #
SVC2020-083
DATE: 18 June 2020
CAMPAIGN
TYPE:
Mandatory-Product Safety
DEALER INSTALLATION ONLY
CAMPAIGN
CATEGORY:
Kit and Bulletin
Subject:
BC1500 Wheel and Tire
Assembly Replacement Kit
(IK00-3922)
Field remedy now available.
1. IK01, IK03: Order one of these kit versions which includes English Supplemental
Operator’s and Maintenance Manual for machines located in the United States,
Canada (except for Quebec), Australia, New Zealand, and other English-speaking
global regions.
2. IK02, IK04: Order one of these kit versions which includes English + translated
Supplemental Operator’s and Maintenance Manuals for machines located in other
global regions.
Additional details regarding kit versions and parts included are shown below.
MACHINE /
ATTACHMENT
MODEL(S):
Serial Numbers
Included Excluded Kit Version
BC1500
See attached listing on
pages 7–19 of this
bulletin for specific VIN
and Serial/Unit numbers
1082, 8357, 8442, 8628, 8629,
8717–8720, 8757, 8794, 8885,
8893, 8940, 8949, 8954, 8961,
8984, 8986, 8989, 8999, 9014,
9015, 9030, 9032, 9214, 9241,
9250, 9251, 9295, 9311, 9317,
9320, 9403, 9431, 9493, 9578,
9579, 9583, 9599, 9602, 9616,
9617,9624, 9711, 9779, 9798,
9854, 9865, 9866, 9878, 9897,
9908, 9924, 9925,
IK01: Solid Steel
Wheels 8 on 6½”, 5/8”
studs; Heavy Duty
Tires 235/75R17.5 LRJ
18 ply; safety sign and
English supplemental
manual
PRODUCT
SAFETY
RECALL
FIRST NOTICE
Page 2 of 28
SVC2020-083 18 June 2020
MACHINE /
ATTACHMENT
MODEL(S):
Serial Numbers
Included Excluded Kit Version
BC1500
1082, 8357, 8442, 8628,
8629, 8717–8720, 8757,
8794, 8885, 8893, 8940,
8949, 8954, 8961, 8984,
8986, 8989, 8999, 9014,
9015, 9030, 9032, 9214,
9241, 9250, 9251, 9295,
9311, 9317, 9320, 9403,
9431, 9493, 9578, 9579,
9583, 9599, 9602, 9616,
9617,9624, 9711, 9779,
9798, 9854, 9865, 9866,
9878, 9897, 9908, 9924,
9925,
See attached listing on pages 7-
19 of this bulletin for specific VIN
and Serial/Unit numbers
IK02: Solid Steel
Wheels 8 on 6½”, 5/8”
studs; Heavy Duty
Tires 235/75R17.5 LRJ
18 ply; safety sign and
English + Translated
Supplemental Manual
BC1500
Temporary wheel/tire
assembly solution
(Assembly PN
163759457) previously
installed.
See attached listing on
page 20 of this bulletin
for specific VIN and
Serial/Unit numbers
NONE
IK03: Safety sign and
English Supplemental
Manual
BC1500
Temporary wheel/tire
assembly solution
(Assembly PN
163759457) previously
installed.
NONE
(Current location of
machines indicate IK04 is
not required.)
See attached listing on page 20
of this bulletin for specific VIN
and Serial/Unit numbers
IK04: Safety sign and
English + Translated
Supplemental Manual
Background: Dealers were previously notified on Service Bulletin SVC2020-052Rev1, SVC2020-
056 and SVC2020-057 about a supplier wheel safety defect.
Models Tire/Wheel Assembly Part Number Wheel Part Number
BC1500
163647430 163647428
163647422 163647345
Defective Supplier Wheel
Improper Lug Nut Seat
and Potential Cracks
Identified by continuously raised lug nut surface
Properly Manufactured Wheel
Correct Lug Nut Seat
Identified by raised surface only around lug nut
location
Page 3 of 28
SVC2020-083 18 June 2020
These Service Bulletins provided instructions for:
1. Destruction of dealer inventory for affected part numbers:
2. Install temporary solution (Assembly PN 163769457) on units that could not
maintain torque and/or tire pressure.
3. Owner notifications to inspect each wheel to determine if supplier wheels were
installed and to notify Vermeer Corporation of the inspection results.
POSSIBLE LOSS OF WHEEL AND RISK OF CRASH
Specific wheels (steel rim) with bolt pattern 8 on 6½ inch (165.1 mm) circle to be used
with 5/8” studs provided by a supplier:
have an incorrect lug nut contact area causing wheel lug nuts to loosen; and/or
can develop possible cracks causing the tire to lose air pressure.
DEATH OR SERIOUS INJURY POSSIBLE
Both conditions may increase the risk of wheel loss and the risk of a crash. Death or
serious injury is possible. Property damage may also occur.
Solution: IMMEDIATE MACHINE MODIFICATIONS
REQUIRED
IK00-3922 has been created to provide the
necessary parts and instructions to replace the
wheel and tire assembly, install a new safety sign
(shown at right), install a new wheel/tire
specification placard decal and provide a
Supplemental Operator’s and Maintenance
Manual.
Please be reminded that it is a violation of Federal
law for you to sell or lease the machines covered
by this notification until this recall has been
performed on these machines. Substantial civil
penalties apply to violations of this law.
1. Kit versions descriptions and instructions:
a. IK01-3922: Includes wheels, tires, safety sign, wheel/tire specification placard
decal, English supplemental manual
b. IK02-3922: Includes wheels, tires, safety sign, wheel/tire specification placard
decal, English + translated supplemental manual
Wheel: Solid Steel 8 on 6½ inch; 5/8” studs
Tire: Heavy duty, 235/75R17.5 LRJ (18 ply)
Wheel/lug nut: 5/8-inch 90-degree cone w/ clamp rings
Tire load rating: 4410 lb (2000 kg) at 85 psi (585 kPa)
Destroy wheel and tires. When you remove the supplier defective steel rim/wheels,
these wheels can never be used or sold for any purpose. The wheels MUST be
destroyed:
o Remove the tire from the steel rim/wheel or deflate the tire.
£WARNING
~ J___ …i _,, i_,’ __ —…….. … -~
~;
…_ … P’ __
=E:~~=
~I k-,-c,—-.. —
X ✓ X .,11 Vw
9 (5) @’ @
… t-·=-~”·-“,¥”.:
U..ofllya.’f.l·– U..oflly–
, .. __ c-_….,..
~ ~ )
Womor”°”‘”Ved__, -__-I I-‘_..,_ =-~ .. i~: @~65
~ –~
=.o-::.~·
.~\I-.•W–A-Y-·——-Page
4 of 28
SVC2020-083 18 June 2020
o Torch cut the wheel(s) across the lug nut area.
o Take photo(s) of the destroyed wheel(s) and attach to campaign warranty
claim.
o Discard the lug nuts so they can never be used or sold for any purpose.
o The removed used tires may be retained in your used tire inventory or
disposed of. The cost of tire removal and disposal is included in the labor
hours.
c. IK03-3922: NO wheels and tires; Includes safety sign, wheel/tire specification
placard decal and English supplemental manual
d. IK04-3922: NO wheels and tires; Includes safety sign, wheel/tire specification
placard decal and English + translated Supplemental Manual
ONLY for machines that Temporary wheel/tire assembly solution (Assembly PN
163759457) was previously installed.
Note: BC1500 production machines will be equipped with the 17.5” wheel/tire
assembly identified in this field campaign kit.
DEALER PARTICIPATION
REVIEW REPORT, ORDER KITS, CONTACT CUSTOMERS
1. Reports will be emailed during the week of June 18, 2020, to dealerships shown
in our records which have units in their territory affected by this Alert. Please
review the report for accuracy, including owner and/or address changes.
If the information contained in the report is NOT correct, please notify the Product
Safety Department on or before July 2, 2020 at:
Telephone: 641-621-7060
Fax: 641-621-8562
Email: productsafety@vermeer.com
2. Dealerships Order Kits by entering the order into iParts/EZParts.
Each dealership should determine the quantity of Kits to order initially depending
upon the number of units that may be available for immediate upgrade. Do not
order more Kits than needed for immediate installation.
3. Translated Manuals. For those dealers in global locations where English is not
the primary/official language, iParts/EZParts will require the Model and VIN be
entered at time of order to enable a translated Supplement Manual to be provided
in the official/primary language. If the translated Supplemental Manual is available
in the language required at time of order, the translated manual will be shipped
with IK02 and IK04 from the Parts Distribution Center. If the translated
Supplemental Manual is not yet available, the translated manual will be sent from
Product Safety department when it becomes available referencing the Sales
Order number of IK02 or IK04, Model and VIN.
4. Contact your affected customer(s) to schedule a mutually acceptable time to
upgrade their machine. Note: Letters will be sent to the customer(s) on or about
July 6, 2020. Also refer to Owner Notification section below.
If you have any questions concerning the installation of IK00-3922, please contact the
Environmental Service Department.
Page 5 of 28
SVC2020-083 18 June 2020
REIMBURSEMENT
Upon completion of each Kit installation, a campaign Warranty Claim must be
submitted to the Corporate Warranty Department for reimbursement of the cost of
parts and labor to install the Kit. The campaign Warranty Claim:
1. Must include photos of destroyed wheels (IK01, IK02 only).
2. Must include a copy of the Work Order if travel is requested.
Labor hours to install IK01 or IK02: 2.0 hours. Note: Tire disposal is included in the
labor hours. No additional reimbursement will be paid.
Labor hours to install IK03 or IK04: 1.0 hour. No photos for installation of these kit
versions are required. Applicable only if Temporary Wheel Solution (Assembly PN
163769457) was previously installed.
If dealer assists owner with wheel inspection, dealer will be reimbursed 1.0 hour
labor. Dealer must submit standard warranty claim with wheel photos and inspection
form attached referencing IK003922 in causal part number field.
If a customer submits inspection form directly to Vermeer Corporation, the dealer will
not also be paid for a second inspection.
Note: Future notices to dealers and owners are dependent upon the receipt of
Warranty Claims.
OWNER NOTIFICATION
Sample Letters: Included at the end of this Bulletin are sample letters which will be
sent by Vermeer Corporation directly to the Owners on or about July 6, 2020, via
USPS certified/registered mail. Please note there are two sample letters:
Owners who responded to interim mailing that wheels were defective or who
had the temporary wheel solution installed.
Owners who did not respond to the interim mailing.
Owner letters will be translated into the following languages:
Arabic Bulgarian
Chinese Dutch
French German
Hebrew Indonesian
Malay Spanish
Thai Turkish
All translated owner notices will also include English owner notification.
This owner notification/letter instructs the owner to contact their local dealership to
arrange for a time to have the Kit installed. After receiving IK00-3922 from the Parts
Center, you must contact your affected customer(s) immediately and schedule a
mutually acceptable time to upgrade their machine.
We regret any inconvenience these corrective measures may cause you. This
required work is for the safety of the crew, the towing vehicle occupants and others
traveling the public roadways. We hope you agree the safety benefits surpass the
inconvenience.
Page 6 of 28
SVC2020-083 18 June 2020
PRODUCT SAFETY DEPARTMENT
Attachment:
IK00-3922 Kit Instructions
Completion Schedule:
Product Safety Alert: Install immediately
90 days from MM/DD/YYYY
180 days from MM/DD/YYYY
1 year from MM/DD/YYYY
Only Units within Standard Limited
Warranty Period
N/A
Reimbursement:
Product Safety Alert:
Work Completion Certificate Required
All Units Listed Above
Parts Labor Paid (Labor Code: SB20)
Only Units within Standard Limited Warranty
Period
No Reimbursement
Internal Reference:
TREAD Act Code
(Choose one or
more codes
applicable)
— Not Applicable 12 Exterior lighting
02 Suspension 16 Structure
03 Service brake system, hydraulic 17 Latch
04 Service brake system, air 19 Tires
05 Parking brake 20 Wheels
11 Electrical 21 Trailer hitch
~
□
□
□
□
□
□ □
□ □
□ □
□ □
□ ~
□ □
Page 7 of 28
SVC2020-083 18 June 2020
MODEL VIN MODEL VIN MODEL VIN
BC1500 1VR2161V371001022 BC1500 1VR2161V5D1005374 BC1500 1VR2181V5H1008342
BC1500 1VR2161V771001105 BC1500 1VR2161V5D1005441 BC1500 1VR2181V7H1008343
BC1500 1VR2161V971001168 BC1500 1VR2161V2D1005476 BC1500 1VR2181V9H1008344
BC1500 1VR2161V871001209 BC1500 1VR2161V9D1005510 BC1500 1VR2181V0H1008345
BC1500 1VR2161V471001224 BC1500 1VR2161V8D1005532 BC1500 1VR2181V2H1008346
BC1500 1VR2161V971001249 BC1500 1VR2161V5D1005603 BC1500 1VR2161V9H1008347
BC1500 1VR2161V181001277 BC1500 1VR2161V4D1005656 BC1500 1VR2161V9H1008350
BC1500 1VR2161V681001288 BC1500 1VR2161VXE1005825 BC1500 1VR2181V6H1008351
BC1500 1VR2161V181001294 BC1500 1VR2161V4E1005920 BC1500 1VR2161V2H1008352
BC1500 1VR2161V081001304 BC1500 1VR2161V7E1006043 BC1500 1VR2161V4H1008353
BC1500 1VR2161VX81001407 BC1500 1VR2161V6E1006065 BC1500 1VR2161V6H1008354
BC1500 1VR2161V881001437 BC1500 1VR2161V7E1006155 BC1500 1VR2181V3H1008355
BC1500 1VR2161V381001457 BC1500 1VR2161VXE1006196 BC1500 1VR2181V5H1008356
BC1500 1VR2161VX81001522 BC1500 1VR2161V3F1006316 BC1500 1VR2161V3H1008358
BC1500 1VR2161V191002043 BC1500 1VR2161V6F1006326 BC1500 1VR2161V5H1008359
BC1500 1VR2161V491002053 BC1500 1VR2161V7F1006335 BC1500 1VR2161V1H1008360
BC1500 1VR2161VX91002056 BC1500 1VR2161V2F1006503 BC1500 1VR2161V3H1008361
BC1500 1VR2161V491002098 BC1500 1VR2181VXG1008156 BC1500 1VR2161V5H1008362
BC1500 1VR2161V191002110 BC1500 1VR2181V1G1008286 BC1500 1VR2161V7H1008363
BC1500 1VR2161V291002133 BC1500 1VR2181V7G1008311 BC1500 1VR2181V4H1008364
BC1500 1VR2161V591002255 BC1500 1VR2181V4H1008316 BC1500 1VR2181V6H1008365
BC1500 1VR2161V9A1002375 BC1500 1VR2181V6H1008317 BC1500 1VR2181V8H1008366
BC1500 1VR2161V4A1002378 BC1500 1VR2181VXH1008319 BC1500 1VR2181VXH1008367
BC1500 1VR2161V4A1002400 BC1500 1VR2181V6H1008320 BC1500 1VR2181V1H1008368
BC1500 1VR2161V2A1002508 BC1500 1VR2181V8H1008321 BC1500 1VR2181V3H1008369
BC1500 1VR2161V5B1002651 BC1500 1VR2181VXH1008322 BC1500 1VR2181VXH1008370
BC1500 1VR2161V3B1002664 BC1500 1VR2181V1H1008323 BC1500 1VR2181V1H1008371
BC1500 1VR2161V2B1002669 BC1500 1VR2181V3H1008324 BC1500 1VR2181V3H1008372
BC1500 1VR2161V2B1002719 BC1500 1VR2181V5H1008325 BC1500 1VR2181V5H1008373
BC1500 1VR2161V1B1002761 BC1500 1VR2181V7H1008326 BC1500 1VR2181V7H1008374
BC1500 1VR2161V7B1002795 BC1500 1VR2181V9H1008327 BC1500 1VR2181V9H1008375
BC1500 1VR2161V2B1002798 BC1500 1VR2181V0H1008328 BC1500 1VR2181V2H1008377
BC1500 1VR2161V3C1002956 BC1500 1VR2181V2H1008329 BC1500 1VR2181V2H1008380
BC1500 1VR2161VXC1002971 BC1500 1VR2181V9H1008330 BC1500 1VR2181V4H1008381
BC1500 1VR2161V1C1002972 BC1500 1VR2181V0H1008331 BC1500 1VR2181V6H1008382
BC1500 1VR2161V7C1002975 BC1500 1VR2181V2H1008332 BC1500 1VR2181V8H1008383
BC1500 1VR2161V7C1003012 BC1500 1VR2181V4H1008333 BC1500 1VR2181VXH1008384
BC1500 1VR2161V2C1003015 BC1500 1VR2181V8H1008335 BC1500 1VR2181V1H1008385
BC1500 1VR2161V6C1003048 BC1500 1VR2181V1H1008337 BC1500 1VR2161V8H1008386
BC1500 1VR2161V2C1003130 BC1500 1VR2181V3H1008338 BC1500 1VR2161VXH1008387
BC1500 1VR2161V0C1005040 BC1500 1VR2181V5H1008339 BC1500 1VR2161V1H1008388
BC1500 1VR2161V7C1005049 BC1500 1VR2181V1H1008340 BC1500 1VR2181V9H1008389
BC1500 1VR2161VXD1005323 BC1500 1VR2181V3H1008341 BC1500 1VR2161VXH1008390
AFFECTED MACHINES – IK01-3922
Page 8 of 28
SVC2020-083 18 June 2020
MODEL VIN MODEL VIN MODEL VIN
BC1500 1VR2181V7H1008391 BC1500 1VR2181V5H1008437 BC1500 1VR2181V2H1008492
BC1500 1VR2161V3H1008392 BC1500 1VR2181V7H1008438 BC1500 1VR2181V4H1008493
BC1500 1VR2181V0H1008393 BC1500 1VR2181V9H1008439 BC1500 1VR2181V6H1008494
BC1500 1VR2161V7H1008394 BC1500 1VR2161VXH1008440 BC1500 1VR2181V8H1008495
BC1500 1VR2161V9H1008395 BC1500 1VR2161V1H1008441 BC1500 1VR2181V1H1008497
BC1500 1VR2161V0H1008396 BC1500 1VR2181V2H1008444 BC1500 1VR2181V3H1008498
BC1500 1VR2161V2H1008397 BC1500 1VR2181V4H1008445 BC1500 1VR2181V5H1008499
BC1500 1VR2181VXH1008398 BC1500 1VR2181V6H1008446 BC1500 1VR2181V8H1008500
BC1500 1VR2181V1H1008399 BC1500 1VR2181V8H1008447 BC1500 1VR2181VXH1008501
BC1500 1VR2181V4H1008400 BC1500 1VR2181VXH1008448 BC1500 1VR2181V1H1008502
BC1500 1VR2181V6H1008401 BC1500 1VR2181V8H1008450 BC1500 1VR2181V3H1008503
BC1500 1VR2181V8H1008402 BC1500 1VR2181VXH1008451 BC1500 1VR2181V5H1008504
BC1500 1VR2181VXH1008403 BC1500 1VR2181V1H1008452 BC1500 1VR2181V7H1008505
BC1500 1VR2181V1H1008404 BC1500 1VR2181V3H1008453 BC1500 1VR2181V9H1008506
BC1500 1VR2181V3H1008405 BC1500 1VR2181V5H1008454 BC1500 1VR2162V7H1008507
BC1500 1VR2181V5H1008406 BC1500 1VR2181V7H1008455 BC1500 1VR2162V9H1008508
BC1500 1VR2181V7H1008407 BC1500 1VR2181V9H1008456 BC1500 1VR2181V4H1008509
BC1500 1VR2181V9H1008408 BC1500 1VR2181V2H1008458 BC1500 1VR2181V0H1008510
BC1500 1VR2181V0H1008409 BC1500 1VR2181V4H1008459 BC1500 1VR2181V2H1008511
BC1500 1VR2181V7H1008410 BC1500 1VR2181V0H1008460 BC1500 1VR2181V4H1008512
BC1500 1VR2181V0H1008412 BC1500 1VR2181V2H1008461 BC1500 1VR2181V6H1008513
BC1500 1VR2181V2H1008413 BC1500 1VR2181V4H1008462 BC1500 1VR2181V8H1008514
BC1500 1VR2181V4H1008414 BC1500 1VR2181V6H1008463 BC1500 1VR2181VXH1008515
BC1500 1VR2181V6H1008415 BC1500 1VR2181VXH1008465 BC1500 1VR2181V1H1008516
BC1500 1VR2181V8H1008416 BC1500 1VR2181V3H1008470 BC1500 1VR2181V3H1008517
BC1500 1VR2181VXH1008417 BC1500 1VR2181V5H1008471 BC1500 1VR2181V5H1008518
BC1500 1VR2181V1H1008418 BC1500 1VR2161V1H1008472 BC1500 1VR2161V8H1008520
BC1500 1VR2181V3H1008419 BC1500 1VR2161V3H1008473 BC1500 1VR2161V1H1008522
BC1500 1VR2181VXH1008420 BC1500 1VR2181V0H1008474 BC1500 1VR2161V3H1008523
BC1500 1VR2181V1H1008421 BC1500 1VR2181V2H1008475 BC1500 1VR2161V5H1008524
BC1500 1VR2181V3H1008422 BC1500 1VR2181V4H1008476 BC1500 1VR2181V2H1008525
BC1500 1VR2181V5H1008423 BC1500 1VR2181V8H1008478 BC1500 1VR2181V4H1008526
BC1500 1VR2181V7H1008424 BC1500 1VR2181V6H1008480 BC1500 1VR2181V6H1008527
BC1500 1VR2181V9H1008425 BC1500 1VR2181V8H1008481 BC1500 1VR2181V8H1008528
BC1500 1VR2181V0H1008426 BC1500 1VR2181VXH1008482 BC1500 1VR2181VXH1008529
BC1500 1VR2181V2H1008427 BC1500 1VR2181V1H1008483 BC1500 1VR2181V6H1008530
BC1500 1VR2181V4H1008428 BC1500 1VR2181V3H1008484 BC1500 1VR2181V8H1008531
BC1500 1VR2181V6H1008429 BC1500 1VR2181V5H1008485 BC1500 1VR2181VXH1008532
BC1500 1VR2181V2H1008430 BC1500 1VR2181V9H1008487 BC1500 1VR2181V1H1008533
BC1500 1VR2181V4H1008431 BC1500 1VR2181V0H1008488 BC1500 1VR2181V3H1008534
BC1500 1VR2181V8H1008433 BC1500 1VR2181V2H1008489 BC1500 1VR2181V5H1008535
BC1500 1VR2181VXH1008434 BC1500 1VR2181V9H1008490 BC1500 1VR2181V7H1008536
BC1500 1VR2181V3H1008436 BC1500 1VR2181V0H1008491 BC1500 1VR2181V9H1008537
AFFECTED MACHINES – IK01-3922
Page 9 of 28
SVC2020-083 18 June 2020
MODEL VIN MODEL VIN MODEL VIN
BC1500 1VR2181V0H1008538 BC1500 1VR2161VXH1008583 BC1500 1VR2161V6H1008631
BC1500 1VR2181V2H1008539 BC1500 1VR2161V1H1008584 BC1500 1VR2161V8H1008632
BC1500 1VR2181V9H1008540 BC1500 1VR2161V3H1008585 BC1500 1VR2161V1H1008634
BC1500 1VR2181V0H1008541 BC1500 1VR2181V0H1008586 BC1500 1VR2181V9H1008635
BC1500 1VR2181V2H1008542 BC1500 1VR2181V2H1008587 BC1500 1VR2181V0H1008636
BC1500 1VR2181V4H1008543 BC1500 1VR2181V4H1008588 BC1500 1VR2181V2H1008637
BC1500 1VR2161V0H1008544 BC1500 1VR2181V6H1008589 BC1500 1VR2181V4H1008638
BC1500 1VR2181V8H1008545 BC1500 1VR2181V2H1008590 BC1500 1VR2181V4H1008641
BC1500 1VR2181VXH1008546 BC1500 1VR2181V4H1008591 BC1500 1VR2181V6H1008642
BC1500 1VR2161V6H1008547 BC1500 1VR2181V8H1008593 BC1500 1VR2181V8H1008643
BC1500 1VR2181V3H1008548 BC1500 1VR2181VXH1008594 BC1500 1VR2181VXH1008644
BC1500 1VR2181V5H1008549 BC1500 1VR2181V1H1008595 BC1500 1VR2181V1H1008645
BC1500 1VR2181V3H1008551 BC1500 1VR2181V3H1008596 BC1500 1VR2181V3H1008646
BC1500 1VR2161VXH1008552 BC1500 1VR2181V5H1008597 BC1500 1VR2181V5H1008647
BC1500 1VR2181V7H1008553 BC1500 1VR2181V7H1008598 BC1500 1VR2181V7H1008648
BC1500 1VR2161V3H1008554 BC1500 1VR2181V9H1008599 BC1500 1VR2181V9H1008649
BC1500 1VR2181V0H1008555 BC1500 1VR2181V1H1008600 BC1500 1VR2181V5H1008650
BC1500 1VR2161V7H1008556 BC1500 1VR2181V5H1008602 BC1500 1VR2181V7H1008651
BC1500 1VR2181V4H1008557 BC1500 1VR2181V7H1008603 BC1500 1VR2181V9H1008652
BC1500 1VR2161V0H1008558 BC1500 1VR2181V9H1008604 BC1500 1VR2181V0H1008653
BC1500 1VR2161V2H1008559 BC1500 1VR2181V0H1008605 BC1500 1VR2181V2H1008654
BC1500 1VR2161V9H1008560 BC1500 1VR2181V2H1008606 BC1500 1VR2181V4H1008655
BC1500 1VR2181V6H1008561 BC1500 1VR2181V4H1008607 BC1500 1VR2181V6H1008656
BC1500 1VR2161V2H1008562 BC1500 1VR2181V6H1008608 BC1500 1VR2181V8H1008657
BC1500 1VR2161V4H1008563 BC1500 1VR2181V8H1008609 BC1500 1VR2181VXH1008658
BC1500 1VR2181V3H1008565 BC1500 1VR2181V4H1008610 BC1500 1VR2181V1H1008659
BC1500 1VR2181V5H1008566 BC1500 1VR2181V6H1008611 BC1500 1VR2181V8H1008660
BC1500 1VR2181V7H1008567 BC1500 1VR2181V8H1008612 BC1500 1VR2181VXH1008661
BC1500 1VR2181V9H1008568 BC1500 1VR2181VXH1008613 BC1500 1VR2181V1H1008662
BC1500 1VR2181V0H1008569 BC1500 1VR2181V1H1008614 BC1500 1VR2181V3H1008663
BC1500 1VR2181V7H1008570 BC1500 1VR2181V3H1008615 BC1500 1VR2181V5H1008664
BC1500 1VR2181V9H1008571 BC1500 1VR2181V5H1008616 BC1500 1VR2181V7H1008665
BC1500 1VR2181V0H1008572 BC1500 1VR2181V7H1008617 BC1500 1VR2181V9H1008666
BC1500 1VR2181V2H1008573 BC1500 1VR2181V0H1008619 BC1500 1VR2181V0H1008667
BC1500 1VR2181V4H1008574 BC1500 1VR2181V7H1008620 BC1500 1VR2181V2H1008668
BC1500 1VR2181V6H1008575 BC1500 1VR2181V9H1008621 BC1500 1VR2181V4H1008669
BC1500 1VR2181V8H1008576 BC1500 1VR2181V0H1008622 BC1500 1VR2181V0H1008670
BC1500 1VR2181VXH1008577 BC1500 1VR2181V2H1008623 BC1500 1VR2181V2H1008671
BC1500 1VR2181V1H1008578 BC1500 1VR2181V4H1008624 BC1500 1VR2181V4H1008672
BC1500 1VR2181V3H1008579 BC1500 1VR2181V6H1008625 BC1500 1VR2181V6H1008673
BC1500 1VR2161V4H1008580 BC1500 1VR2181V8H1008626 BC1500 1VR2181V8H1008674
BC1500 1VR2161V6H1008581 BC1500 1VR2181VXH1008627 BC1500 1VR2181VXH1008675
BC1500 1VR2181V3H1008582 BC1500 1VR2161V4H1008630 BC1500 1VR2181V1H1008676
AFFECTED MACHINES – IK01-3922
Page 10 of 28
SVC2020-083 18 June 2020
MODEL VIN MODEL VIN MODEL VIN
BC1500 1VR2181V3H1008677 BC1500 1VR2181V5H1008728 BC1500 1VR2181V2J1008773
BC1500 1VR2181V5H1008678 BC1500 1VR2181V7H1008729 BC1500 1VR2181V6J1008775
BC1500 1VR2181V7H1008679 BC1500 1VR2181V3H1008730 BC1500 1VR2181V8J1008776
BC1500 1VR2181V3H1008680 BC1500 1VR2181V5H1008731 BC1500 1VR2181VXJ1008777
BC1500 1VR2181V5H1008681 BC1500 1VR2161V1H1008732 BC1500 1VR2181V1J1008778
BC1500 1VR2181V7H1008682 BC1500 1VR2161V3H1008733 BC1500 1VR2181V3J1008779
BC1500 1VR2181V9H1008683 BC1500 1VR2181V0H1008734 BC1500 1VR2181VXJ1008780
BC1500 1VR2181V0H1008684 BC1500 1VR2181V2H1008735 BC1500 1VR2181V1J1008781
BC1500 1VR2181V2H1008685 BC1500 1VR2181V4H1008736 BC1500 1VR2181V3J1008782
BC1500 1VR2181V4H1008686 BC1500 1VR2181V6H1008737 BC1500 1VR2161VXJ1008783
BC1500 1VR2181V6H1008687 BC1500 1VR2161V2H1008738 BC1500 1VR2161V1J1008784
BC1500 1VR2181V8H1008688 BC1500 1VR2161V4H1008739 BC1500 1VR2161V3J1008785
BC1500 1VR2161V4H1008689 BC1500 1VR2181V6H1008740 BC1500 1VR2161V5J1008786
BC1500 1VR2161V0H1008690 BC1500 1VR2181V8H1008741 BC1500 1VR2181V2J1008787
BC1500 1VR2181V8H1008691 BC1500 1VR2181VXH1008742 BC1500 1VR2181V4J1008788
BC1500 1VR2181V1H1008693 BC1500 1VR2181V1H1008743 BC1500 1VR2181V6J1008789
BC1500 1VR2181V3H1008694 BC1500 1VR2181V3H1008744 BC1500 1VR2181V2J1008790
BC1500 1VR2181V5H1008695 BC1500 1VR2181V5H1008745 BC1500 1VR2181V4J1008791
BC1500 1VR2181V7H1008696 BC1500 1VR2181V7H1008746 BC1500 1VR2181V6J1008792
BC1500 1VR2181V9H1008697 BC1500 1VR2181V9H1008747 BC1500 1VR2181V3J1008796
BC1500 1VR2181V0H1008698 BC1500 1VR2181V0H1008748 BC1500 1VR2181V5J1008797
BC1500 1VR2181V2H1008699 BC1500 1VR2181V2H1008749 BC1500 1VR2181V7J1008798
BC1500 1VR2181V5H1008700 BC1500 1VR2181V0H1008751 BC1500 1VR2181V1J1008800
BC1500 1VR2181V7H1008701 BC1500 1VR2181V2H1008752 BC1500 1VR2181V3J1008801
BC1500 1VR2181V9H1008702 BC1500 1VR2161V9H1008753 BC1500 1VR2181V5J1008802
BC1500 1VR2181V0H1008703 BC1500 1VR2181V6H1008754 BC1500 1VR2181V7J1008803
BC1500 1VR2181V2H1008704 BC1500 1VR2181V8H1008755 BC1500 1VR2181V9J1008804
BC1500 1VR2181V4H1008705 BC1500 1VR2161V4H1008756 BC1500 1VR2181V0J1008805
BC1500 1VR2181V6H1008706 BC1500 1VR2181V3H1008758 BC1500 1VR2181V2J1008806
BC1500 1VR2181V8H1008707 BC1500 1VR2181V5H1008759 BC1500 1VR2181V4J1008807
BC1500 1VR2181VXH1008708 BC1500 1VR2181V1H1008760 BC1500 1VR2161V0J1008808
BC1500 1VR2181V1H1008709 BC1500 1VR2181V3H1008761 BC1500 1VR2181V8J1008809
BC1500 1VR2181V8H1008710 BC1500 1VR2181V5H1008762 BC1500 1VR2181V4J1008810
BC1500 1VR2181VXH1008711 BC1500 1VR2161V4J1008763 BC1500 1VR2181V6J1008811
BC1500 1VR2181V1H1008712 BC1500 1VR2181V1J1008764 BC1500 1VR2181V8J1008812
BC1500 1VR2181V3H1008713 BC1500 1VR2181V3J1008765 BC1500 1VR2181VXJ1008813
BC1500 1VR2181V5H1008714 BC1500 1VR2181V5J1008766 BC1500 1VR2161V6J1008814
BC1500 1VR2181V7H1008715 BC1500 1VR2181V7J1008767 BC1500 1VR2181V3J1008815
BC1500 1VR2161V7H1008721 BC1500 1VR2181V9J1008768 BC1500 1VR2181V5J1008816
BC1500 1VR2181V6H1008723 BC1500 1VR2161V5J1008769 BC1500 1VR2181V7J1008817
BC1500 1VR2181V8H1008724 BC1500 1VR2181V7J1008770 BC1500 1VR2181V9J1008818
BC1500 1VR2181VXH1008725 BC1500 1VR2181V9J1008771 BC1500 1VR2181V0J1008819
BC1500 1VR2181V1H1008726 BC1500 1VR2181V0J1008772 BC1500 1VR2181V7J1008820
AFFECTED MACHINES – IK01-3922
Page 11 of 28
SVC2020-083 18 June 2020
MODEL VIN MODEL VIN MODEL VIN
BC1500 1VR2181V9J1008821 BC1500 1VR2181V2J1008868 BC1500 1VR2181V0J1008917
BC1500 1VR2181V0J1008822 BC1500 1VR2181V4J1008869 BC1500 1VR2181V2J1008918
BC1500 1VR2181V2J1008823 BC1500 1VR2181V0J1008870 BC1500 1VR2181V4J1008919
BC1500 1VR2181V4J1008824 BC1500 1VR2181V2J1008871 BC1500 1VR2181V0J1008920
BC1500 1VR2181V6J1008825 BC1500 1VR2181V4J1008872 BC1500 1VR2181V2J1008921
BC1500 1VR2161V2J1008826 BC1500 1VR2181V6J1008873 BC1500 1VR2161V9J1008922
BC1500 1VR2181VXJ1008827 BC1500 1VR2181V8J1008874 BC1500 1VR2181V6J1008923
BC1500 1VR2181V1J1008828 BC1500 1VR2181VXJ1008875 BC1500 1VR2181V8J1008924
BC1500 1VR2181V3J1008829 BC1500 1VR2181V1J1008876 BC1500 1VR2181VXJ1008925
BC1500 1VR2181VXJ1008830 BC1500 1VR2181V3J1008877 BC1500 1VR2181V1J1008926
BC1500 1VR2181V1J1008831 BC1500 1VR2181V5J1008878 BC1500 1VR2181V3J1008927
BC1500 1VR2181V3J1008832 BC1500 1VR2181V3J1008880 BC1500 1VR2181V5J1008928
BC1500 1VR2181V5J1008833 BC1500 1VR2181V5J1008881 BC1500 1VR2181V7J1008929
BC1500 1VR2181V7J1008834 BC1500 1VR2181V7J1008882 BC1500 1VR2181V3J1008930
BC1500 1VR2181V9J1008835 BC1500 1VR2181V9J1008883 BC1500 1VR2161VXJ1008931
BC1500 1VR2181V0J1008836 BC1500 1VR2181V0J1008884 BC1500 1VR2181V7J1008932
BC1500 1VR2161V7J1008837 BC1500 1VR2181V4J1008886 BC1500 1VR2181V9J1008933
BC1500 1VR2181V4J1008838 BC1500 1VR2181V6J1008887 BC1500 1VR2181V0J1008934
BC1500 1VR2181V6J1008839 BC1500 1VR2181V8J1008888 BC1500 1VR2181V2J1008935
BC1500 1VR2181V2J1008840 BC1500 1VR2181VXJ1008889 BC1500 1VR2181V4J1008936
BC1500 1VR2181V4J1008841 BC1500 1VR2181V6J1008890 BC1500 1VR2181V6J1008937
BC1500 1VR2181V6J1008842 BC1500 1VR2181VXJ1008892 BC1500 1VR2181V8J1008938
BC1500 1VR2181V8J1008843 BC1500 1VR2181V3J1008894 BC1500 1VR2181VXJ1008939
BC1500 1VR2181VXJ1008844 BC1500 1VR2181V5J1008895 BC1500 1VR2181V8J1008941
BC1500 1VR2181V1J1008845 BC1500 1VR2181V7J1008896 BC1500 1VR2181VXJ1008942
BC1500 1VR2181V3J1008846 BC1500 1VR2181V9J1008897 BC1500 1VR2181V1J1008943
BC1500 1VR2181V5J1008847 BC1500 1VR2181V0J1008898 BC1500 1VR2181V3J1008944
BC1500 1VR2181V7J1008848 BC1500 1VR2181V2J1008899 BC1500 1VR2181V5J1008945
BC1500 1VR2181V9J1008849 BC1500 1VR2181V5J1008900 BC1500 1VR2181V7J1008946
BC1500 1VR2181V5J1008850 BC1500 1VR2181V7J1008901 BC1500 1VR2181V9J1008947
BC1500 1VR2181V7J1008851 BC1500 1VR2181V0J1008903 BC1500 1VR2181V0J1008948
BC1500 1VR2181V9J1008852 BC1500 1VR2181V2J1008904 BC1500 1VR2181V9J1008950
BC1500 1VR2181V0J1008853 BC1500 1VR2181V4J1008905 BC1500 1VR2181V0J1008951
BC1500 1VR2181V8J1008857 BC1500 1VR2181V6J1008906 BC1500 1VR2181V2J1008952
BC1500 1VR2181VXJ1008858 BC1500 1VR2181V8J1008907 BC1500 1VR2181V4J1008953
BC1500 1VR2181V1J1008859 BC1500 1VR2181VXJ1008908 BC1500 1VR2181V8J1008955
BC1500 1VR2181V8J1008860 BC1500 1VR2181V1J1008909 BC1500 1VR2181VXJ1008956
BC1500 1VR2181VXJ1008861 BC1500 1VR2181V8J1008910 BC1500 1VR2181V1J1008957
BC1500 1VR2181V1J1008862 BC1500 1VR2181VXJ1008911 BC1500 1VR2181V3J1008958
BC1500 1VR2181V5J1008864 BC1500 1VR2181V1J1008912 BC1500 1VR2181V5J1008959
BC1500 1VR2181V7J1008865 BC1500 1VR2181V3J1008913 BC1500 1VR2181V1J1008960
BC1500 1VR2181V9J1008866 BC1500 1VR2181V5J1008914 BC1500 1VR2181V5J1008962
BC1500 1VR2181V0J1008867 BC1500 1VR2181V9J1008916 BC1500 1VR2181V7J1008963
AFFECTED MACHINES – IK01-3922
Page 12 of 28
SVC2020-083 18 June 2020
MODEL VIN MODEL VIN MODEL VIN
BC1500 1VR2181V9J1008964 BC1500 1VR2181V2J1009017 BC1500 1VR2161V5J1009064
BC1500 1VR2181V0J1008965 BC1500 1VR2181V4J1009018 BC1500 1VR2181V2J1009065
BC1500 1VR2181V2J1008966 BC1500 1VR2181V6J1009019 BC1500 1VR2161V9J1009066
BC1500 1VR2181V4J1008967 BC1500 1VR2181V2J1009020 BC1500 1VR2181V6J1009067
BC1500 1VR2181V6J1008968 BC1500 1VR2181V4J1009021 BC1500 1VR2161V2J1009068
BC1500 1VR2181V8J1008969 BC1500 1VR2181V6J1009022 BC1500 1VR2181VXJ1009069
BC1500 1VR2181V4J1008970 BC1500 1VR2181V8J1009023 BC1500 1VR2161V0J1009070
BC1500 1VR2181V6J1008971 BC1500 1VR2181VXJ1009024 BC1500 1VR2181V8J1009071
BC1500 1VR2181V1J1008974 BC1500 1VR2181V1J1009025 BC1500 1VR2181VXJ1009072
BC1500 1VR2181V3J1008975 BC1500 1VR2181V3J1009026 BC1500 1VR2181V1J1009073
BC1500 1VR2181V5J1008976 BC1500 1VR2181V5J1009027 BC1500 1VR2161V8J1009074
BC1500 1VR2181V7J1008977 BC1500 1VR2181V7J1009028 BC1500 1VR2181V5J1009075
BC1500 1VR2181V9J1008978 BC1500 1VR2181V9J1009029 BC1500 1VR2161V1J1009076
BC1500 1VR2181V0J1008979 BC1500 1VR2181V7J1009031 BC1500 1VR2181V9J1009077
BC1500 1VR2181V7J1008980 BC1500 1VR2181V0J1009033 BC1500 1VR2161V5J1009078
BC1500 1VR2181V9J1008981 BC1500 1VR2181V2J1009034 BC1500 1VR2181V2J1009079
BC1500 1VR2181V0J1008982 BC1500 1VR2181V4J1009035 BC1500 1VR2161V3J1009080
BC1500 1VR2181V2J1008983 BC1500 1VR2181V6J1009036 BC1500 1VR2181V0J1009081
BC1500 1VR2181V6J1008985 BC1500 1VR2181V8J1009037 BC1500 1VR2181V2J1009082
BC1500 1VR2181VXJ1008987 BC1500 1VR2181VXJ1009038 BC1500 1VR2181V4J1009083
BC1500 1VR2181V1J1008988 BC1500 1VR2181V1J1009039 BC1500 1VR2181V6J1009084
BC1500 1VR2181VXJ1008990 BC1500 1VR2181V8J1009040 BC1500 1VR2181V8J1009085
BC1500 1VR2181V1J1008991 BC1500 1VR2181VXJ1009041 BC1500 1VR2181VXJ1009086
BC1500 1VR2181V3J1008992 BC1500 1VR2181V1J1009042 BC1500 1VR2161V6J1009087
BC1500 1VR2181V5J1008993 BC1500 1VR2181V3J1009043 BC1500 1VR2181V3J1009088
BC1500 1VR2181V7J1008994 BC1500 1VR2181V5J1009044 BC1500 1VR2181V1J1009090
BC1500 1VR2181V9J1008995 BC1500 1VR2161V1J1009045 BC1500 1VR2181V5J1009092
BC1500 1VR2181V2J1008997 BC1500 1VR2161V5J1009047 BC1500 1VR2181V9J1009094
BC1500 1VR2181V4J1008998 BC1500 1VR2181V2J1009048 BC1500 1VR2181V0J1009095
BC1500 1VR2181V7J1009000 BC1500 1VR2161V9J1009049 BC1500 1VR2181V2J1009096
BC1500 1VR2181V9J1009001 BC1500 1VR2181V0J1009050 BC1500 1VR2181V4J1009097
BC1500 1VR2181V2J1009003 BC1500 1VR2161V7J1009051 BC1500 1VR2181V6J1009098
BC1500 1VR2181V4J1009004 BC1500 1VR2181V4J1009052 BC1500 1VR2181V0J1009100
BC1500 1VR2161V0J1009005 BC1500 1VR2161V0J1009053 BC1500 1VR2181V2J1009101
BC1500 1VR2181V8J1009006 BC1500 1VR2181V8J1009054 BC1500 1VR2181V6J1009103
BC1500 1VR2181VXJ1009007 BC1500 1VR2181VXJ1009055 BC1500 1VR2181V8J1009104
BC1500 1VR2181V1J1009008 BC1500 1VR2181V1J1009056 BC1500 1VR2181V1J1009106
BC1500 1VR2181V3J1009009 BC1500 1VR2181V3J1009057 BC1500 1VR2181V3J1009107
BC1500 1VR2181VXJ1009010 BC1500 1VR2181V5J1009058 BC1500 1VR2161VXJ1009108
BC1500 1VR2181V1J1009011 BC1500 1VR2181V7J1009059 BC1500 1VR2181V7J1009109
BC1500 1VR2181V3J1009012 BC1500 1VR2181V5J1009061 BC1500 1VR2181V3J1009110
BC1500 1VR2181V5J1009013 BC1500 1VR2161V1J1009062 BC1500 1VR2181V5J1009111
BC1500 1VR2181V0J1009016 BC1500 1VR2181V9J1009063 BC1500 1VR2181V7J1009112
AFFECTED MACHINES – IK01-3922
Page 13 of 28
SVC2020-083 18 June 2020
MODEL VIN MODEL VIN MODEL VIN
BC1500 1VR2181V9J1009113 BC1500 1VR2181V7J1009157 BC1500 1VR2181V8J1009202
BC1500 1VR2181V0J1009114 BC1500 1VR2181V9J1009158 BC1500 1VR2181VXJ1009203
BC1500 1VR2181V2J1009115 BC1500 1VR2181V0J1009159 BC1500 1VR2181V1J1009204
BC1500 1VR2181V4J1009116 BC1500 1VR2181V7J1009160 BC1500 1VR2181V5J1009206
BC1500 1VR2181V6J1009117 BC1500 1VR2181V9J1009161 BC1500 1VR2181V7J1009207
BC1500 1VR2181V8J1009118 BC1500 1VR2181V0J1009162 BC1500 1VR2181V9J1009208
BC1500 1VR2181VXJ1009119 BC1500 1VR2181V2J1009163 BC1500 1VR2181V0J1009209
BC1500 1VR2181V6J1009120 BC1500 1VR2181V4J1009164 BC1500 1VR2181V7J1009210
BC1500 1VR2181V8J1009121 BC1500 1VR2181V6J1009165 BC1500 1VR2181V9J1009211
BC1500 1VR2181VXJ1009122 BC1500 1VR2181V8J1009166 BC1500 1VR2181V0J1009212
BC1500 1VR2181V1J1009123 BC1500 1VR2181VXJ1009167 BC1500 1VR2181V2J1009213
BC1500 1VR2181V3J1009124 BC1500 1VR2181V1J1009168 BC1500 1VR2181V6J1009215
BC1500 1VR2181V5J1009125 BC1500 1VR2181V3J1009169 BC1500 1VR2181V8J1009216
BC1500 1VR2181V7J1009126 BC1500 1VR2181VXJ1009170 BC1500 1VR2181VXJ1009217
BC1500 1VR2181V9J1009127 BC1500 1VR2181V1J1009171 BC1500 1VR2181V1J1009218
BC1500 1VR2181V0J1009128 BC1500 1VR2181V3J1009172 BC1500 1VR2181V3J1009219
BC1500 1VR2181V2J1009129 BC1500 1VR2181V5J1009173 BC1500 1VR2181VXJ1009220
BC1500 1VR2181V9J1009130 BC1500 1VR2181V7J1009174 BC1500 1VR2181V1J1009221
BC1500 1VR2181V0J1009131 BC1500 1VR2181V9J1009175 BC1500 1VR2181V3J1009222
BC1500 1VR2181V2J1009132 BC1500 1VR2181V0J1009176 BC1500 1VR2181V5J1009223
BC1500 1VR2181V4J1009133 BC1500 1VR2181V2J1009177 BC1500 1VR2181V7J1009224
BC1500 1VR2181V8J1009135 BC1500 1VR2181V4J1009178 BC1500 1VR2181V9J1009225
BC1500 1VR2181VXJ1009136 BC1500 1VR2181V6J1009179 BC1500 1VR2181V4J1009228
BC1500 1VR2181V1J1009137 BC1500 1VR2181V4J1009181 BC1500 1VR2181V6J1009229
BC1500 1VR2181V3J1009138 BC1500 1VR2181V6J1009182 BC1500 1VR2181V2J1009230
BC1500 1VR2181V5J1009139 BC1500 1VR2181V8J1009183 BC1500 1VR2181V4J1009231
BC1500 1VR2181V1J1009140 BC1500 1VR2181VXJ1009184 BC1500 1VR2181V6J1009232
BC1500 1VR2181V3J1009141 BC1500 1VR2181V1J1009185 BC1500 1VR2181V8J1009233
BC1500 1VR2181V5J1009142 BC1500 1VR2181V3J1009186 BC1500 1VR2181VXJ1009234
BC1500 1VR2181V7J1009143 BC1500 1VR2181V5J1009187 BC1500 1VR2181V1J1009235
BC1500 1VR2181V9J1009144 BC1500 1VR2181V7J1009188 BC1500 1VR2181V3J1009236
BC1500 1VR2181V0J1009145 BC1500 1VR2181V9J1009189 BC1500 1VR2181V5J1009237
BC1500 1VR2181V2J1009146 BC1500 1VR2181V5J1009190 BC1500 1VR2181V7J1009238
BC1500 1VR2181V4J1009147 BC1500 1VR2181V9J1009192 BC1500 1VR2181V9J1009239
BC1500 1VR2181V6J1009148 BC1500 1VR2181V0J1009193 BC1500 1VR2181V5J1009240
BC1500 1VR2181V8J1009149 BC1500 1VR2181V2J1009194 BC1500 1VR2181V9J1009242
BC1500 1VR2181V4J1009150 BC1500 1VR2181V4J1009195 BC1500 1VR2181V0J1009243
BC1500 1VR2181V6J1009151 BC1500 1VR2181V6J1009196 BC1500 1VR2181V2J1009244
BC1500 1VR2181V8J1009152 BC1500 1VR2161V2J1009197 BC1500 1VR2181V4J1009245
BC1500 1VR2181VXJ1009153 BC1500 1VR2181VXJ1009198 BC1500 1VR2181V6J1009246
BC1500 1VR2181V1J1009154 BC1500 1VR2181V1J1009199 BC1500 1VR2181V8J1009247
BC1500 1VR2181V3J1009155 BC1500 1VR2181V4J1009200 BC1500 1VR2181VXJ1009248
BC1500 1VR2181V5J1009156 BC1500 1VR2181V6J1009201 BC1500 1VR2181V1J1009249
AFFECTED MACHINES – IK01-3922
Page 14 of 28
SVC2020-083 18 June 2020
MODEL VIN MODEL VIN MODEL VIN
BC1500 1VR2181V1J1009252 BC1500 1VR2181V1K1009298 BC1500 1VR2181V6K1009345
BC1500 1VR2181V3J1009253 BC1500 1VR2181V3K1009299 BC1500 1VR2181V8K1009346
BC1500 1VR2181V5J1009254 BC1500 1VR2181V6K1009300 BC1500 1VR2181VXK1009347
BC1500 1VR2181V7J1009255 BC1500 1VR2181V8K1009301 BC1500 1VR2181V1K1009348
BC1500 1VR2181V7K1009256 BC1500 1VR2181VXK1009302 BC1500 1VR2181V3K1009349
BC1500 1VR2181V9K1009257 BC1500 1VR2181V1K1009303 BC1500 1VR2181VXK1009350
BC1500 1VR2181V0K1009258 BC1500 1VR2181V3K1009304 BC1500 1VR2181V1K1009351
BC1500 1VR2181V9K1009260 BC1500 1VR2181V5K1009305 BC1500 1VR2181V3K1009352
BC1500 1VR2181V0K1009261 BC1500 1VR2181V7K1009306 BC1500 1VR2181V5K1009353
BC1500 1VR2181V2K1009262 BC1500 1VR2181V9K1009307 BC1500 1VR2181V7K1009354
BC1500 1VR2181V4K1009263 BC1500 1VR2181V0K1009308 BC1500 1VR2181V9K1009355
BC1500 1VR2181V6K1009264 BC1500 1VR2181V2K1009309 BC1500 1VR2181V0K1009356
BC1500 1VR2181V8K1009265 BC1500 1VR2181V9K1009310 BC1500 1VR2181V2K1009357
BC1500 1VR2181VXK1009266 BC1500 1VR2181V2K1009312 BC1500 1VR2181V4K1009358
BC1500 1VR2161V6K1009267 BC1500 1VR2181V4K1009313 BC1500 1VR2181V6K1009359
BC1500 1VR2181V3K1009268 BC1500 1VR2181V6K1009314 BC1500 1VR2181V2K1009360
BC1500 1VR2181V5K1009269 BC1500 1VR2181V8K1009315 BC1500 1VR2181V4K1009361
BC1500 1VR2181V1K1009270 BC1500 1VR2181VXK1009316 BC1500 1VR2181V6K1009362
BC1500 1VR2181V3K1009271 BC1500 1VR2181V3K1009318 BC1500 1VR2181V8K1009363
BC1500 1VR2181V5K1009272 BC1500 1VR2181V5K1009319 BC1500 1VR2181VXK1009364
BC1500 1VR2181V7K1009273 BC1500 1VR2181V3K1009321 BC1500 1VR2181V1K1009365
BC1500 1VR2181V9K1009274 BC1500 1VR2181V5K1009322 BC1500 1VR2181V3K1009366
BC1500 1VR2181V0K1009275 BC1500 1VR2181V7K1009323 BC1500 1VR2181V5K1009367
BC1500 1VR2181V2K1009276 BC1500 1VR2181V9K1009324 BC1500 1VR2181V7K1009368
BC1500 1VR2181V4K1009277 BC1500 1VR2181V0K1009325 BC1500 1VR2181V9K1009369
BC1500 1VR2181V6K1009278 BC1500 1VR2181V2K1009326 BC1500 1VR2181V5K1009370
BC1500 1VR2181V8K1009279 BC1500 1VR2181V4K1009327 BC1500 1VR2181V7K1009371
BC1500 1VR2181V4K1009280 BC1500 1VR2181V6K1009328 BC1500 1VR2181V9K1009372
BC1500 1VR2181V6K1009281 BC1500 1VR2181V8K1009329 BC1500 1VR2181V0K1009373
BC1500 1VR2181V8K1009282 BC1500 1VR2181V4K1009330 BC1500 1VR2181V2K1009374
BC1500 1VR2181VXK1009283 BC1500 1VR2181V6K1009331 BC1500 1VR2181V4K1009375
BC1500 1VR2181V1K1009284 BC1500 1VR2181V8K1009332 BC1500 1VR2181V6K1009376
BC1500 1VR2181V3K1009285 BC1500 1VR2181VXK1009333 BC1500 1VR2181V8K1009377
BC1500 1VR2181V5K1009286 BC1500 1VR2181V3K1009335 BC1500 1VR2181VXK1009378
BC1500 1VR2181V7K1009287 BC1500 1VR2181V5K1009336 BC1500 1VR2181V1K1009379
BC1500 1VR2181V0K1009289 BC1500 1VR2181V7K1009337 BC1500 1VR2181VXK1009381
BC1500 1VR2181V7K1009290 BC1500 1VR2181V9K1009338 BC1500 1VR2181V1K1009382
BC1500 1VR2181V9K1009291 BC1500 1VR2181V0K1009339 BC1500 1VR2181V3K1009383
BC1500 1VR2181V0K1009292 BC1500 1VR2181V7K1009340 BC1500 1VR2181V5K1009384
BC1500 1VR2181V2K1009293 BC1500 1VR2181V9K1009341 BC1500 1VR2181V7K1009385
BC1500 1VR2181V4K1009294 BC1500 1VR2181V0K1009342 BC1500 1VR2181V9K1009386
BC1500 1VR2181V8K1009296 BC1500 1VR2181V2K1009343 BC1500 1VR2181V0K1009387
BC1500 1VR2181VXK1009297 BC1500 1VR2181V4K1009344 BC1500 1VR2181V2K1009388
AFFECTED MACHINES – IK01-3922
Page 15 of 28
SVC2020-083 18 June 2020
MODEL VIN MODEL VIN MODEL VIN
BC1500 1VR2181V4K1009389 BC1500 1VR2181V9K1009436 BC1500 1VR2181V1K1009480
BC1500 1VR2181V0K1009390 BC1500 1VR2181V0K1009437 BC1500 1VR2181V3K1009481
BC1500 1VR2181V2K1009391 BC1500 1VR2161V7K1009438 BC1500 1VR2181V5K1009482
BC1500 1VR2181V4K1009392 BC1500 1VR2181V4K1009439 BC1500 1VR2181V7K1009483
BC1500 1VR2181V6K1009393 BC1500 1VR2181V0K1009440 BC1500 1VR2181V9K1009484
BC1500 1VR2181V8K1009394 BC1500 1VR2181V2K1009441 BC1500 1VR2181V0K1009485
BC1500 1VR2181VXK1009395 BC1500 1VR2181V4K1009442 BC1500 1VR2181V2K1009486
BC1500 1VR2181V3K1009397 BC1500 1VR2181V6K1009443 BC1500 1VR2181V4K1009487
BC1500 1VR2181V5K1009398 BC1500 1VR2181V8K1009444 BC1500 1VR2181V6K1009488
BC1500 1VR2181V7K1009399 BC1500 1VR2181VXK1009445 BC1500 1VR2181V8K1009489
BC1500 1VR2181VXK1009400 BC1500 1VR2181V1K1009446 BC1500 1VR2181V4K1009490
BC1500 1VR2181V1K1009401 BC1500 1VR2181V3K1009447 BC1500 1VR2181V6K1009491
BC1500 1VR2181V3K1009402 BC1500 1VR2181V5K1009448 BC1500 1VR2181V8K1009492
BC1500 1VR2181V7K1009404 BC1500 1VR2181V7K1009449 BC1500 1VR2181V1K1009494
BC1500 1VR2181V9K1009405 BC1500 1VR2181V3K1009450 BC1500 1VR2181V3K1009495
BC1500 1VR2181V0K1009406 BC1500 1VR2181V7K1009452 BC1500 1VR2181V5K1009496
BC1500 1VR2181V2K1009407 BC1500 1VR2181V9K1009453 BC1500 1VR2181V7K1009497
BC1500 1VR2181V4K1009408 BC1500 1VR2181V0K1009454 BC1500 1VR2181V9K1009498
BC1500 1VR2181V6K1009409 BC1500 1VR2181V2K1009455 BC1500 1VR2181V0K1009499
BC1500 1VR2181V2K1009410 BC1500 1VR2181V4K1009456 BC1500 1VR2181V3K1009500
BC1500 1VR2181V4K1009411 BC1500 1VR2181V6K1009457 BC1500 1VR2181V5K1009501
BC1500 1VR2181V6K1009412 BC1500 1VR2181V8K1009458 BC1500 1VR2181V7K1009502
BC1500 1VR2181V8K1009413 BC1500 1VR2181VXK1009459 BC1500 1VR2181V9K1009503
BC1500 1VR2181VXK1009414 BC1500 1VR2181V6K1009460 BC1500 1VR2181V0K1009504
BC1500 1VR2181V1K1009415 BC1500 1VR2181V8K1009461 BC1500 1VR2181V2K1009505
BC1500 1VR2181V3K1009416 BC1500 1VR2181VXK1009462 BC1500 1VR2181V4K1009506
BC1500 1VR2181V5K1009417 BC1500 1VR2181V1K1009463 BC1500 1VR2181V6K1009507
BC1500 1VR2181V7K1009418 BC1500 1VR2181V3K1009464 BC1500 1VR2181VXK1009509
BC1500 1VR2181V9K1009419 BC1500 1VR2161VXK1009465 BC1500 1VR2181V6K1009510
BC1500 1VR2181V5K1009420 BC1500 1VR2181V7K1009466 BC1500 1VR2181V8K1009511
BC1500 1VR2181V7K1009421 BC1500 1VR2181V9K1009467 BC1500 1VR2181V1K1009513
BC1500 1VR2181V0K1009423 BC1500 1VR2181V0K1009468 BC1500 1VR2181V3K1009514
BC1500 1VR2181V2K1009424 BC1500 1VR2181V2K1009469 BC1500 1VR2181V5K1009515
BC1500 1VR2181V4K1009425 BC1500 1VR2181V9K1009470 BC1500 1VR2181V7K1009516
BC1500 1VR2181V6K1009426 BC1500 1VR2181V0K1009471 BC1500 1VR2181V9K1009517
BC1500 1VR2181V8K1009427 BC1500 1VR2181V2K1009472 BC1500 1VR2181V0K1009518
BC1500 1VR2181VXK1009428 BC1500 1VR2181V4K1009473 BC1500 1VR2181V2K1009519
BC1500 1VR2181V1K1009429 BC1500 1VR2181V6K1009474 BC1500 1VR2181V9K1009520
BC1500 1VR2181V8K1009430 BC1500 1VR2181V8K1009475 BC1500 1VR2181V0K1009521
BC1500 1VR2181V1K1009432 BC1500 1VR2181VXK1009476 BC1500 1VR2181V2K1009522
BC1500 1VR2181V3K1009433 BC1500 1VR2181V1K1009477 BC1500 1VR2181V4K1009523
BC1500 1VR2181V5K1009434 BC1500 1VR2181V3K1009478 BC1500 1VR2181V6K1009524
BC1500 1VR2181V7K1009435 BC1500 1VR2181V5K1009479 BC1500 1VR2181V8K1009525
AFFECTED MACHINES – IK01-3922
Page 16 of 28
SVC2020-083 18 June 2020
MODEL VIN MODEL VIN MODEL VIN
BC1500 1VR2181VXK1009526 BC1500 1VR2181V4K1009571 BC1500 1VR2181V6K1009622
BC1500 1VR2181V1K1009527 BC1500 1VR2181V6K1009572 BC1500 1VR2181V8K1009623
BC1500 1VR2181V3K1009528 BC1500 1VR2181V8K1009573 BC1500 1VR2181V1K1009625
BC1500 1VR2181V5K1009529 BC1500 1VR2181VXK1009574 BC1500 1VR2181V3K1009626
BC1500 1VR2181V1K1009530 BC1500 1VR2181V1K1009575 BC1500 1VR2181V5K1009627
BC1500 1VR2181V3K1009531 BC1500 1VR2181V3K1009576 BC1500 1VR2181V7K1009628
BC1500 1VR2181V5K1009532 BC1500 1VR2181V5K1009577 BC1500 1VR2181V9K1009629
BC1500 1VR2181V7K1009533 BC1500 1VR2181V5K1009580 BC1500 1VR2181V5K1009630
BC1500 1VR2181V9K1009534 BC1500 1VR2181V7K1009581 BC1500 1VR2181V7K1009631
BC1500 1VR2181V2K1009536 BC1500 1VR2181V9K1009582 BC1500 1VR2181V0K1009633
BC1500 1VR2181V4K1009537 BC1500 1VR2181V2K1009584 BC1500 1VR2181V2K1009634
BC1500 1VR2181V6K1009538 BC1500 1VR2181V4K1009585 BC1500 1VR2181V6K1009636
BC1500 1VR2181V8K1009539 BC1500 1VR2181V6K1009586 BC1500 1VR2181V8K1009637
BC1500 1VR2181V4K1009540 BC1500 1VR2181V8K1009587 BC1500 1VR2181VXK1009638
BC1500 1VR2181V6K1009541 BC1500 1VR2181VXK1009588 BC1500 1VR2181V1K1009639
BC1500 1VR2181V8K1009542 BC1500 1VR2181V1K1009589 BC1500 1VR2181V8K1009640
BC1500 1VR2181VXK1009543 BC1500 1VR2181V8K1009590 BC1500 1VR2181VXK1009641
BC1500 1VR2181V1K1009544 BC1500 1VR2181VXK1009591 BC1500 1VR2181V1K1009642
BC1500 1VR2181V3K1009545 BC1500 1VR2181V1K1009592 BC1500 1VR2181V3K1009643
BC1500 1VR2181V5K1009546 BC1500 1VR2181V3K1009593 BC1500 1VR2181V5K1009644
BC1500 1VR2181V7K1009547 BC1500 1VR2181V5K1009594 BC1500 1VR2181V7K1009645
BC1500 1VR2181V9K1009548 BC1500 1VR2181V7K1009595 BC1500 1VR2181V9K1009646
BC1500 1VR2181V0K1009549 BC1500 1VR2181V9K1009596 BC1500 1VR2181V0K1009647
BC1500 1VR2181V7K1009550 BC1500 1VR2181V0K1009597 BC1500 1VR2181V2K1009648
BC1500 1VR2181V9K1009551 BC1500 1VR2181V2K1009598 BC1500 1VR2181V4K1009649
BC1500 1VR2181V0K1009552 BC1500 1VR2181V9K1009601 BC1500 1VR2181V0K1009650
BC1500 1VR2181V4K1009554 BC1500 1VR2181V2K1009603 BC1500 1VR2181V2K1009651
BC1500 1VR2161V0K1009555 BC1500 1VR2181V4K1009604 BC1500 1VR2181V4K1009652
BC1500 1VR2181V8K1009556 BC1500 1VR2181V6K1009605 BC1500 1VR2181V6K1009653
BC1500 1VR2181VXK1009557 BC1500 1VR2181V8K1009606 BC1500 1VR2181V8K1009654
BC1500 1VR2181V1K1009558 BC1500 1VR2181VXK1009607 BC1500 1VR2181V3K1009657
BC1500 1VR2181V3K1009559 BC1500 1VR2181V1K1009608 BC1500 1VR2181V5K1009658
BC1500 1VR2181VXK1009560 BC1500 1VR2181V3K1009609 BC1500 1VR2181V7K1009659
BC1500 1VR2181V1K1009561 BC1500 1VR2181VXK1009610 BC1500 1VR2181V3K1009660
BC1500 1VR2181V3K1009562 BC1500 1VR2181V1K1009611 BC1500 1VR2181V9K1009663
BC1500 1VR2181V5K1009563 BC1500 1VR2181V3K1009612 BC1500 1VR2161V5K1009664
BC1500 1VR2181V7K1009564 BC1500 1VR2181V5K1009613 BC1500 1VR2181V2K1009665
BC1500 1VR2181V9K1009565 BC1500 1VR2181V7K1009614 BC1500 1VR2181V4K1009666
BC1500 1VR2181V0K1009566 BC1500 1VR2181V9K1009615 BC1500 1VR2181V6K1009667
BC1500 1VR2181V2K1009567 BC1500 1VR2181V4K1009618 BC1500 1VR2181V8K1009668
BC1500 1VR2181V4K1009568 BC1500 1VR2181V6K1009619 BC1500 1VR2181VXK1009669
BC1500 1VR2181V6K1009569 BC1500 1VR2181V2K1009620 BC1500 1VR2161V2K1009671
BC1500 1VR2181V2K1009570 BC1500 1VR2181V4K1009621 BC1500 1VR2181VXK1009672
AFFECTED MACHINES – IK01-3922
Page 17 of 28
SVC2020-083 18 June 2020
MODEL VIN MODEL VIN MODEL VIN
BC1500 1VR2181V1K1009673 BC1500 1VR2181VXL1009723 BC1500 1VR2181V1L1009772
BC1500 1VR2181V3K1009674 BC1500 1VR2181V1L1009724 BC1500 1VR2181V3L1009773
BC1500 1VR2181V5K1009675 BC1500 1VR2181V3L1009725 BC1500 1VR2181V7L1009775
BC1500 1VR2181V7K1009676 BC1500 1VR2181V5L1009726 BC1500 1VR2181V9L1009776
BC1500 1VR2181V9K1009677 BC1500 1VR2181V7L1009727 BC1500 1VR2181V0L1009777
BC1500 1VR2181V0K1009678 BC1500 1VR2181V9L1009728 BC1500 1VR2181V2L1009778
BC1500 1VR2181V9K1009680 BC1500 1VR2181V0L1009729 BC1500 1VR2181V0L1009780
BC1500 1VR2181V0K1009681 BC1500 1VR2181V7L1009730 BC1500 1VR2181V2L1009781
BC1500 1VR2181V2K1009682 BC1500 1VR2181V9L1009731 BC1500 1VR2181V4L1009782
BC1500 1VR2181V4K1009683 BC1500 1VR2181V4L1009734 BC1500 1VR2181V8L1009784
BC1500 1VR2181V6K1009684 BC1500 1VR2181V6L1009735 BC1500 1VR2181VXL1009785
BC1500 1VR2181V8K1009685 BC1500 1VR2181V8L1009736 BC1500 1VR2181V1L1009786
BC1500 1VR2181V3K1009688 BC1500 1VR2181VXL1009737 BC1500 1VR2181V3L1009787
BC1500 1VR2181V5K1009689 BC1500 1VR2181V3L1009739 BC1500 1VR2181V5L1009788
BC1500 1VR2181V1K1009690 BC1500 1VR2181VXL1009740 BC1500 1VR2181V3L1009790
BC1500 1VR2181V3K1009691 BC1500 1VR2181V1L1009741 BC1500 1VR2181V5L1009791
BC1500 1VR2181V5K1009692 BC1500 1VR2181V3L1009742 BC1500 1VR2181V7L1009792
BC1500 1VR2181V7K1009693 BC1500 1VR2181V5L1009743 BC1500 1VR2181V9L1009793
BC1500 1VR2181V9K1009694 BC1500 1VR2181V9L1009745 BC1500 1VR2181V0L1009794
BC1500 1VR2181V0K1009695 BC1500 1VR2181V0L1009746 BC1500 1VR2181V2L1009795
BC1500 1VR2181V2K1009696 BC1500 1VR2181V2L1009747 BC1500 1VR2181V6L1009797
BC1500 1VR2181V4K1009697 BC1500 1VR2181V4L1009748 BC1500 1VR2181VXL1009799
BC1500 1VR2181V6K1009698 BC1500 1VR2181V6L1009749 BC1500 1VR2181V2L1009800
BC1500 1VR2181V8K1009699 BC1500 1VR2181V2L1009750 BC1500 1VR2181V4L1009801
BC1500 1VR2181V0K1009700 BC1500 1VR2181V4L1009751 BC1500 1VR2181V6L1009802
BC1500 1VR2181V4K1009702 BC1500 1VR2181V6L1009752 BC1500 1VR2181V8L1009803
BC1500 1VR2181V6K1009703 BC1500 1VR2181V8L1009753 BC1500 1VR2181VXL1009804
BC1500 1VR2181V8K1009704 BC1500 1VR2181V1L1009755 BC1500 1VR2181V1L1009805
BC1500 1VR2181V1K1009706 BC1500 1VR2181V3L1009756 BC1500 1VR2181V3L1009806
BC1500 1VR2181V3K1009707 BC1500 1VR2181V5L1009757 BC1500 1VR2181V5L1009807
BC1500 1VR2181V7K1009709 BC1500 1VR2181V7L1009758 BC1500 1VR2181V7L1009808
BC1500 1VR2181V3K1009710 BC1500 1VR2181V9L1009759 BC1500 1VR2181V9L1009809
BC1500 1VR2181V7K1009712 BC1500 1VR2181V5L1009760 BC1500 1VR2181V5L1009810
BC1500 1VR2181V9K1009713 BC1500 1VR2181V7L1009761 BC1500 1VR2181V7L1009811
BC1500 1VR2181V0K1009714 BC1500 1VR2181V9L1009762 BC1500 1VR2181V9L1009812
BC1500 1VR2181V2K1009715 BC1500 1VR2181V2L1009764 BC1500 1VR2181V0L1009813
BC1500 1VR2181V4K1009716 BC1500 1VR2181V4L1009765 BC1500 1VR2181V2L1009814
BC1500 1VR2181V6K1009717 BC1500 1VR2181V6L1009766 BC1500 1VR2181V6L1009816
BC1500 1VR2161V2K1009718 BC1500 1VR2181V8L1009767 BC1500 1VR2181V1L1009819
BC1500 1VR2161V4K1009719 BC1500 1VR2181VXL1009768 BC1500 1VR2181V8L1009820
BC1500 1VR2181V4L1009720 BC1500 1VR2181V1L1009769 BC1500 1VR2181VXL1009821
BC1500 1VR2181V6L1009721 BC1500 1VR2181V8L1009770 BC1500 1VR2181V1L1009822
BC1500 1VR2181V8L1009722 BC1500 1VR2181VXL1009771 BC1500 1VR2181V3L1009823
AFFECTED MACHINES – IK01-3922
Page 18 of 28
SVC2020-083 18 June 2020
MODEL VIN MODEL VIN MODEL VIN
BC1500 1VR2181V5L1009824 BC1500 1VR2181V0L1009875 BC1500 1VR2181VXL1009933
BC1500 1VR2181V7L1009825 BC1500 1VR2181V2L1009876 BC1500 1VR2181V1L1009934
BC1500 1VR2181V9L1009826 BC1500 1VR2181V4L1009877 BC1500 1VR2181V3L1009935
BC1500 1VR2181V0L1009827 BC1500 1VR2161V9L1009880 BC1500 1VR2181V5L1009936
BC1500 1VR2181V4L1009829 BC1500 1VR2181V6L1009881 BC1500 1VR2181V7L1009937
BC1500 1VR2181V0L1009830 BC1500 1VR2181V8L1009882 BC1500 1VR2181V9L1009938
BC1500 1VR2181V2L1009831 BC1500 1VR2181VXL1009883 BC1500 1VR2181V0L1009939
BC1500 1VR2181V4L1009832 BC1500 1VR2181V1L1009884 BC1500 1VR2181V9L1009941
BC1500 1VR2181V6L1009833 BC1500 1VR2181V3L1009885 BC1500 1VR2181V0L1009942
BC1500 1VR2181V8L1009834 BC1500 1VR2181V5L1009886 BC1500 1VR2181V2L1009943
BC1500 1VR2181VXL1009835 BC1500 1VR2181V7L1009887 BC1500 1VR2181V4L1009944
BC1500 1VR2181V1L1009836 BC1500 1VR2181V9L1009888 BC1500 1VR2181V6L1009945
BC1500 1VR2181V3L1009837 BC1500 1VR2181V0L1009889 BC1500 1VR2181V8L1009946
BC1500 1VR2181V5L1009841 BC1500 1VR2181V7L1009890 BC1500 1VR2181VXL1009947
BC1500 1VR2181V7L1009842 BC1500 1VR2181V9L1009891 BC1500 1VR2181V1L1009948
BC1500 1VR2181V9L1009843 BC1500 1VR2181V0L1009892 BC1500 1VR2181V3L1009949
BC1500 1VR2181V0L1009844 BC1500 1VR2181V2L1009893 BC1500 1VR2181V1L1009951
BC1500 1VR2181V2L1009845 BC1500 1VR2181V4L1009894 BC1500 1VR2181V7L1009954
BC1500 1VR2181V4L1009846 BC1500 1VR2181V6L1009895 BC1500 1VR2181V9L1009955
BC1500 1VR2181V6L1009847 BC1500 1VR2161V6L1009898 BC1500 1VR2161V5L1009956
BC1500 1VR2181V8L1009848 BC1500 1VR2161V8L1009899 BC1500 1VR2181V2L1009957
BC1500 1VR2181VXL1009849 BC1500 1VR2181V6L1009900 BC1500 1VR2181V4L1009958
BC1500 1VR2181V6L1009850 BC1500 1VR2181V8L1009901 BC1500 1VR2181V6L1009959
BC1500 1VR2181V8L1009851 BC1500 1VR2181VXL1009902 BC1500 1VR2181V2L1009960
BC1500 1VR2181VXL1009852 BC1500 1VR2181V3L1009904 BC1500 1VR2181V4L1009961
BC1500 1VR2181V1L1009853 BC1500 1VR2181V5L1009905 BC1500 1VR2181V6L1009962
BC1500 1VR2181V5L1009855 BC1500 1VR2181V7L1009906 BC1500 1VR2181V8L1009963
BC1500 1VR2181V7L1009856 BC1500 1VR2181V9L1009907 BC1500 1VR2161V4L1009964
BC1500 1VR2181V9L1009857 BC1500 1VR2181V2L1009912 BC1500 1VR2181V3L1009966
BC1500 1VR2181V0L1009858 BC1500 1VR2181V4L1009913 BC1500 1VR2181V7L1009968
BC1500 1VR2181V2L1009859 BC1500 1VR2181V6L1009914 BC1500 1VR2181V9L1009969
BC1500 1VR2181V9L1009860 BC1500 1VR2181V8L1009915 BC1500 1VR2181V5L1009970
BC1500 1VR2181V0L1009861 BC1500 1VR2181V1L1009917 BC1500 1VR2181V7L1009971
BC1500 1VR2181V2L1009862 BC1500 1VR2181V3L1009918 BC1500 1VR2181V9L1009972
BC1500 1VR2181V4L1009863 BC1500 1VR2181V5L1009919 BC1500 1VR2181V0L1009973
BC1500 1VR2181V1L1009867 BC1500 1VR2181V1L1009920 BC1500 1VR2161V7L1009974
BC1500 1VR2181V3L1009868 BC1500 1VR2181V5L1009922 BC1500 1VR2181V4L1009975
BC1500 1VR2181V5L1009869 BC1500 1VR2181V7L1009923 BC1500 1VR2181V6L1009976
BC1500 1VR2181V1L1009870 BC1500 1VR2181V2L1009926 BC1500 1VR2181V8L1009977
BC1500 1VR2181V3L1009871 BC1500 1VR2181V4L1009927 BC1500 1VR2181VXL1009978
BC1500 1VR2181V5L1009872 BC1500 1VR2181V8L1009929 BC1500 1VR2181V1L1009979
BC1500 1VR2181V7L1009873 BC1500 1VR2181V4L1009930 BC1500 1VR2181V8L1009980
BC1500 1VR2181V9L1009874 BC1500 1VR2181V8L1009932 BC1500 1VR2181VXL1009981
AFFECTED MACHINES – IK01-3922
Page 19 of 28
SVC2020-083 18 June 2020
MODEL VIN MODEL VIN MODEL VIN
BC1500 1VR2181V1L1009982 BC1500 1VR2181V9L1011009 BC1500 1VR2181VXL1011052
BC1500 1VR2181V3L1009983 BC1500 1VR2181V5L1011010 BC1500 1VR2181V1L1011053
BC1500 1VR2181V5L1009984 BC1500 1VR2181V7L1011011 BC1500 1VR2181V3L1011054
BC1500 1VR2161V1L1009985 BC1500 1VR2161V3L1011012 BC1500 1VR2181V5L1011055
BC1500 1VR2181V9L1009986 BC1500 1VR2181V0L1011013
BC1500 1VR2181V0L1009987 BC1500 1VR2181V2L1011014
BC1500 1VR2181V2L1009988 BC1500 1VR2181V4L1011015
BC1500 1VR2181V4L1009989 BC1500 1VR2181V6L1011016
BC1500 1VR2181V0L1009990 BC1500 1VR2181V8L1011017
BC1500 1VR2181V2L1009991 BC1500 1VR2181VXL1011018
BC1500 1VR2181V4L1009992 BC1500 1VR2181V1L1011019
BC1500 1VR2181V6L1009993 BC1500 1VR2181V8L1011020
BC1500 1VR2181V8L1009994 BC1500 1VR2181VXL1011021
BC1500 1VR2181V1L1009996 BC1500 1VR2161V6L1011022
BC1500 1VR2181V3L1009997 BC1500 1VR2181V3L1011023
BC1500 1VR2181V5L1009998 BC1500 1VR2181V5L1011024
BC1500 1VR2181V7L1009999 BC1500 1VR2181V7L1011025
BC1500 1VR2181V8L1010000 BC1500 1VR2181V9L1011026
BC1500 1VR2181VXL1010001 BC1500 1VR2181V0L1011027
BC1500 1VR2181V1L1010002 BC1500 1VR2181V2L1011028
BC1500 1VR2181V3L1010003 BC1500 1VR2181V4L1011029
BC1500 1VR2181V7L1010005 BC1500 1VR2181V0L1011030
BC1500 1VR2181V9L1010006 BC1500 1VR2181V2L1011031
BC1500 1VR2181V0L1010007 BC1500 1VR2161V9L1011032
BC1500 1VR2181V2L1010008 BC1500 1VR2161V0L1011033
BC1500 1VR2181V4L1010009 BC1500 1VR2181V8L1011034
BC1500 1VR2181V0L1010010 BC1500 1VR2181VXL1011035
BC1500 1VR2181V4L1010012 BC1500 1VR2181V1L1011036
BC1500 1VR2181V6L1010013 BC1500 1VR2181V3L1011037
BC1500 1VR2181V8L1010014 BC1500 1VR2181V5L1011038
BC1500 1VR2181V1L1010016 BC1500 1VR2181V7L1011039
BC1500 1VR2181V3L1010017 BC1500 1VR2181V3L1011040
BC1500 1VR2181V5L1010018 BC1500 1VR2181V5L1011041
BC1500 1VR2181V7L1010019 BC1500 1VR2181V7L1011042
BC1500 1VR2181V3L1010020 BC1500 1VR2181V9L1011043
BC1500 1VR2161V9L1011001 BC1500 1VR2161V5L1011044
BC1500 1VR2181V6L1011002 BC1500 1VR2181V2L1011045
BC1500 1VR2181V8L1011003 BC1500 1VR2181V4L1011046
BC1500 1VR2181VXL1011004 BC1500 1VR2181V6L1011047
BC1500 1VR2181V1L1011005 BC1500 1VR2181V8L1011048
BC1500 1VR2181V3L1011006 BC1500 1VR2181VXL1011049
BC1500 1VR2181V5L1011007 BC1500 1VR2181V6L1011050
BC1500 1VR2181V7L1011008 BC1500 1VR2181V8L1011051
AFFECTED MACHINES – IK01-3922
Page 20 of 28
SVC2020-083 18 June 2020
Model VIN Model VIN Model VIN
BC1500 1VR2161V381001426 BC1500 1VR2161V2J1008972 BC1500 1VR2181VXL1009754
BC1500 1VR2161V281001577 BC1500 1VR2181VXJ1008973 BC1500 1VR2181V0L1009763
BC1500 1VR2161V591002059 BC1500 1VR2181V0J1008996 BC1500 1VR2181V5L1009774
BC1500 1VR2161V391002285 BC1500 1VR2161V5J1009002 BC1500 1VR2181V6L1009783
BC1500 1VR2161V8A1002464 BC1500 1VR2181V9J1009046 BC1500 1VR2181V7L1009789
BC1500 1VR2161V5A1002521 BC1500 1VR2181V3J1009060 BC1500 1VR2181V4L1009796
BC1500 1VR2161V0B1002556 BC1500 1VR2161VXJ1009089 BC1500 1VR2181V4L1009815
BC1500 1VR2161V5C1002831 BC1500 1VR2161V8J1009091 BC1500 1VR2161V2L1009817
BC1500 1VR2161V1C1003085 BC1500 1VR2161V1J1009093 BC1500 1VR2181VXL1009818
BC1500 1VR2161V1C1003152 BC1500 1VR2181V8J1009099 BC1500 1VR2181V2L1009828
BC1500 1VR2161V7E1005748 BC1500 1VR2161V9J1009102 BC1500 1VR2181V5L1009838
BC1500 1VR2161V8E1005838 BC1500 1VR2161V4J1009105 BC1500 1VR2161V8L1009840
BC1500 1VR2161V8E1005886 BC1500 1VR2181V6J1009134 BC1500 1VR2181V6L1009864
BC1500 1VR2161V2E1005964 BC1500 1VR2181V2J1009180 BC1500 1VR2161V2L1009879
BC1500 1VR2161V7F1006402 BC1500 1VR2181V7J1009191 BC1500 1VR2181V8L1009896
BC1500 1VR2161V3F1006414 BC1500 1VR2181V3J1009205 BC1500 1VR2181V1L1009903
BC1500 1VR2161V1F1006430 BC1500 1VR2181V0J1009226 BC1500 1VR2181V2L1009909
BC1500 1VR2161VXF1006443 BC1500 1VR2181V2J1009227 BC1500 1VR2181V9L1009910
BC1500 1VR2161V8G1006796 BC1500 1VR2161V7K1009259 BC1500 1VR2181V0L1009911
BC1500 1VR2181VXG1008013 BC1500 1VR2181V9K1009288 BC1500 1VR2181VXL1009916
BC1500 1VR2161V2G1008284 BC1500 1VR2181V1K1009334 BC1500 1VR2181V3L1009921
BC1500 1VR2181VXH1008496 BC1500 1VR2181V8K1009380 BC1500 1VR2181V6L1009928
BC1500 1VR2181V7H1008519 BC1500 1VR2161VXK1009451 BC1500 1VR2181V6L1009931
BC1500 1VR2161VXH1008521 BC1500 1VR2161V2K1009508 BC1500 1VR2161V1L1009940
BC1500 1VR2161V6H1008550 BC1500 1VR2161V4K1009512 BC1500 1VR2181VXL1009950
BC1500 1VR2181V1H1008564 BC1500 1VR2161V5K1009535 BC1500 1VR2181V3L1009952
BC1500 1VR2181V3H1008601 BC1500 1VR2161V7K1009553 BC1500 1VR2181V5L1009953
BC1500 1VR2181V9H1008618 BC1500 1VR2181V7K1009600 BC1500 1VR2181V1L1009965
BC1500 1VR2161VXH1008633 BC1500 1VR2161V3K1009632 BC1500 1VR2181V5L1009967
BC1500 1VR2181V6H1008639 BC1500 1VR2161V9K1009635 BC1500 1VR2161V4L1009995
BC1500 1VR2181V2H1008640 BC1500 1VR2161V4K1009655 BC1500 1VR2181V5L1010004
BC1500 1VR2161V9H1008722 BC1500 1VR2161V6K1009656 BC1500 1VR2161V7L1010011
BC1500 1VR2161V3H1008750 BC1500 1VR2181V5K1009661
BC1500 1VR2161V9J1008774 BC1500 1VR2181V7K1009662
BC1500 1VR2181V8J1008793 BC1500 1VR2161V7K1009679
BC1500 1VR2181V1J1008795 BC1500 1VR2161V4K1009686
BC1500 1VR2181V9J1008799 BC1500 1VR2161V6K1009687
BC1500 1VR2181V4J1008855 BC1500 1VR2161V7K1009701
BC1500 1VR2181V3J1008863 BC1500 1VR2181VXK1009705
BC1500 1VR2181V7J1008879 BC1500 1VR2161V5L1009732
BC1500 1VR2181V8J1008891 BC1500 1VR2181V2L1009733
BC1500 1VR2181V9J1008902 BC1500 1VR2161V6L1009738
BC1500 1VR2181V7J1008915 BC1500 1VR2181V7L1009744
AFFECTED MACHINES – IK03-3922
Page 21 of 28
SVC2020-083 18 June 2020
NHTSA SAFETY RECALL NUMBER 20V-085
July 6, 2020
VIA USPS CERTIFIED/REGISTERED MAIL
Dear «MODEL» Owner:
This notice is sent to you in accordance with the requirements of the U.S. National Traffic and Motor Vehicle
Safety Act.
In March 2020, Vermeer decided that a defect, that relates to motor vehicle safety, existed in certain model
year 2016–2020 Vermeer «MODEL» brush chippers. At that time, Vermeer
Corporation sent owners an interim
notice asking owners to inspect the wheels. Thank you for returning the inspection form and/or contacting
your dealer for the temporary wheel solution. The final field campaign remedy is now available.
What is the issue?
Certain brush chippers with specific wheels (steel rim) with bolt pattern 8 on 6½ inch (165.1 mm) circle to be
used with 5/8-inch studs provided by a supplier:
have an incorrect lug nut contact area causing the wheel lug nuts to loosen; and/or
can develop possible cracks causing the tire to lose air pressure.
Both conditions may increase the risk of wheel loss and the risk of a crash. Death or serious injury is
possible. Property damage may also occur.
IMMEDIATE MACHINE MODIFICATIONS REQUIRED
IK00-3922 has been created to provide the necessary parts and instructions to replace the wheel and tire
assembly, install a new safety sign (shown on next page), install a new wheel/tire specification placard
Sample Owner
Letter #1 – Temporary
wheel solution installed
or Inspection indicated
defective wheels
IMPORTANT
SAFETY
RECALL
First Notice
BC1500 Wheel and Tire
Assembly Replacement Kit
(IK00-3922)
Field campaign remedy is now available.
Model: «Model»
This notice applies to your vehicle,
Serial No: «VIN»
Sa ~ , Tcmpor ..,
instal ed
I “‘- ction tive Defective Supplier Wheel
Improper Lug Nut Seat
and Potential Cracks
Properly Manufactured Wheel
Correct Lug Nut Seat
Identified by raised surface only around lug nut location
Page 22 of 28
SVC2020-083 18 June 2020
decal, and provide a Supplemental Operator’s and Maintenance Manual. This kit must be installed as
soon as possible.
If your dealer did not install the temporary wheel solution, prior to having
this field remedy kit installed, please continue to verify the torque of
each lug nut [210 ft-lb (285 Nm)] and tire pressure [80 psi (550 kPa)] as
part of your pre-trip inspection every day or at a minimum every 150
miles (250 km) until IK00-3922: Wheel and Tire Assembly Replacement
Kit is installed by your dealer.
Wheels and tires included in this field remedy kit are:
Wheel: Solid Steel 8 on 6½ inch; 5/8” studs
Tire: Heavy duty, 235/75R17.5 LRJ (18 ply)
Wheel/lug nut: 5/8-inch 90-degree cone w/ clamp rings
Tire load rating: 4410 lb (2000 kg) at 85 psi (585 kPa)
Please contact your authorized, independent Vermeer dealer immediately to arrange a mutually
acceptable time and location to install IK00-3922 at no cost to you for labor or materials. The installation of
this kit is estimated at 2.0 hours of labor. If the Vermeer dealer travels to the unit to install the kit, costs may
be incurred by the owner.
If your dealer installed a temporary wheel/tire assembly solution (Assembly PN 163759457) since receiving
the March 2020 notice, the wheels and tires are part of the final field remedy kit and will remain on your
brush chipper. However, to complete this field remedy kit, the dealer will install a new safety sign and a new
wheel/tire specification placard decal and provide a Supplemental Operator’s and Maintenance Manual. The
installation of this kit version is estimated at 1.0 hour of labor. If the Vermeer dealer travels to the unit to
install the kit, costs may be incurred by the owner.
You must have your machine upgraded for these safety features.
Contact your local Vermeer Dealer: «Service_Dealer_Name»
«Serv_Dealer_Add1» «Serv_Dealer_Add2»
«Serv_Dealer_City» «Serv_Dealer_St» «Serv_Dealer_Zip»
«SERV_DEALER_COUNTRY»
Telephone: «Serv_Dealer_Phone»
According to our records, you currently own a Vermeer «MODEL» brush chipper. The Model and Serial
Number of the «MODEL» is shown at the top right of this letter. If you no longer own this unit, please notify the
Product Safety Department at:
Toll Free: 800-829-0051, extension 7060
Telephone: 641-621-7060
E-mail: productsafety@vermeer.com
If possible, please provide the name and address of the new owner.
We regret any inconvenience these corrective measures may cause you. This required work is for the safety of
the crew, the towing vehicle occupants and others traveling the public roadways. We hope you agree the
safety benefits surpass the inconvenience.
Very truly yours,
PRODUCT SAFETY DEPARTMENT
Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice
to the lessee within ten (10) days.
If the authorized dealer has failed or is unable to remedy the defect without charge and within a reasonable
time, contact Vermeer Product Safety by email at productsafety@vermeer
.com or by calling 800-829-0051 or
641-621-7060. You may also submit a complaint to the Administrator, National Highway Traffic Safety
.ol.W-G
~ ~)
~;
X ✓ x .,,. v …
9 Iii) @’ @
==.-:-.:…-=.. ~* ::..”‘:”~
__ .,.. .. __
:::.:..-=:-..;::;–
——- ,._.,. ___ _ .,. ____
Page 23 of 28
SVC2020-083 18 June 2020
Administration, 1200 New Jersey Avenue SE, Washington, D.C. 20590 or call the Vehicle Safety Hotline at
888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov
Page 24 of 28
SVC2020-083 18 June 2020
NHTSA SAFETY RECALL NUMBER 20V-085
VIA USPS CERTIFIED/REGISTERED MAIL
July 6, 2020
Dear «MODEL» Owner:
This notice is sent to you in accordance with the requirements of the U.S. National Traffic and Motor Vehicle
Safety Act.
In March 2020, Vermeer decided that a defect, that relates to motor vehicle safety, existed in certain model
year 2016–2020 Vermeer «MODEL» brush chipper. At that time, Vermeer
Corporation sent owners an interim
notice (a copy is enclosed) asking owners to inspect the wheels and complete and return a Wheel Lug Nut
inspection form and wheel photos. According to your records, you have not returned the inspection form
and/or contacted your dealer regarding this field issue. The final field campaign remedy is now available.
What is the issue?
Certain brush chippers with specific wheels (steel rim) with bolt pattern 8 on 6½ inch (165.1 mm) circle to be
used with 5/8-inch studs provided by a supplier:
have an incorrect lug nut contact area causing the wheel lug nuts to loosen; and/or
can develop possible cracks causing the tire to lose air pressure.
Both conditions may increase the risk of wheel loss and the risk of a crash. Death or serious injury is
possible. Property damage may also occur.
IMMEDIATE WHEEL INSPECTION REQUIRED
1. WHEEL AND LUG NUT INSPECTION. Inspect each brush chipper wheel by referencing the photos to
identify if defective supplier wheels are installed. If you own more than one affected brush chipper, you will
receive a letter for each machine. The Model and VIN is shown on the top left corner of this letter and the
Sample Owner Letter #2 –
NO Owner inspection
response received,
unknown wheel status
IMPORTANT
SAFETY
RECALL
First Notice
BC1500 Wheel and Tire
Assembly Replacement Kit
(IK00-3922)
Field campaign remedy is now available.
Model: «Model»
This notice applies to your vehicle,
Serial No: «VIN»
Sa _J_ e –
J_ 0 i ection
res.oonsc r(;c\., ✓ed_,
Defective Supplier Wheel
Improper Lug Nut Seat
and Potential Cracks
Properly Manufactured Wheel
Correct Lug Nut Seat
Identified by raised surface only around lug nut location
Page 25 of 28
SVC2020-083 18 June 2020
Wheel Lug Nut Inspection form.
2. Does not have defective supplier wheels: See enclosed Wheel Lug Nut Inspection form to be completed
and returned to: safetyform@vermeer.com. Owners who return the Wheel and Lug Nut Inspection form
with photos identifying no defective supplier wheels will be mailed a Vermeer Parts Certificate for $50.00
USD redeemable at your local Vermeer dealer. If you do not return the Inspection form, Vermeer
Corporation will continue to send further communications regarding this recall.
3. Has defective supplier wheels, contact your local Vermeer Dealer for new wheel and tire
assembly. IK00-3922 has been created to provide the necessary parts and instructions to replace the
wheel and tire assembly, install a new safety sign (shown at right), install a new wheel/tire specification
placard decal, and provide a Supplemental Operator’s and Maintenance Manual. This kit must be
installed as soon as possible.
If your dealer did not install the temporary wheel solution and until IK00-
3922: Wheel and Tire Assembly Replacement Kit is installed by your
dealer, please continue to verify the torque of each lug nut [210 ft-lb
(285 Nm)] and tire pressure [80 psi (550 kPa)] as part of your pre-trip
inspection every day or at a minimum every 150 miles (250 km).
Wheels and tires included in this field remedy kit are:
Wheel: Solid Steel 8 on 6½ inch; 5/8” studs
Tire: Heavy duty, 235/75R17.5 LRJ (18 ply)
Wheel/lug nut: 5/8-inch 90-degree cone w/ clamp rings
Tire load rating: 4410 lb (2000 kg) at 85 psi (585 kPa)
Please contact your authorized, independent Vermeer dealer immediately to arrange a mutually
acceptable time and location to install IK00-3922 at no cost to you for labor or materials. The installation
of this kit is estimated at 2.0 hours of labor. If the Vermeer dealer travels to the unit to install the kit, costs
may be incurred by the owner.
If your dealer installed a temporary wheel/tire assembly solution (Assembly PN 163759457) since
receiving the March 2020 notice, the wheels and tires are part of the final field remedy kit and will remain
on your brush chipper. However, to complete this field remedy kit, the dealer will install a new safety sign
and a new wheel/tire specification placard decal and provide a Supplemental Operator’s and
Maintenance Manual. The installation of this kit version is estimated at 1.0 hour of labor. If the Vermeer
dealer travels to the unit to install the kit, costs may be incurred by the owner.
You must have your machine upgraded for these safety features.
Contact your local Vermeer Dealer: «Service_Dealer_Name»
«Serv_Dealer_Add1» «Serv_Dealer_Add2»
«Serv_Dealer_City» «Serv_Dealer_St» «Serv_Dealer_Zip»
«SERV_DEALER_COUNTRY»
Telephone: «Serv_Dealer_Phone»
According to our records, you currently own a Vermeer «MODEL» brush chipper. The Model and Serial
Number of the «MODEL» is shown at the top right of this letter. If you no longer own this unit, please notify the
Product Safety Department at:
Toll Free: 800-829-0051, extension 7060
Telephone: 641-621-7060
E-mail: productsafety@vermeer.com
If possible, please provide the name and address of the new owner.
We regret any inconvenience these corrective measures may cause you. This required work is for the safety of
the crew, the towing vehicle occupants and others traveling the public roadways. We hope you agree the
safety benefits surpass the inconvenience.
Page 26 of 28
SVC2020-083 18 June 2020
Very truly yours,
PRODUCT SAFETY DEPARTMENT
Enclosures:
March 12, 2020 Interim Notice Wheel and Lug Nut Inspection
First Notice Wheel and Lug Nut Inspection Form
Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice
to the lessee within ten (10) days.
If the authorized dealer has failed or is unable to remedy the defect without charge and within a reasonable
time, contact Vermeer Product Safety by email at productsafety@vermeer
.com or by calling 800-829-0051 or
641-621-7060. You may also submit a complaint to the Administrator, National Highway Traffic Safety
Administration, 1200 New Jersey Avenue SE, Washington, D.C. 20590 or call the Vehicle Safety Hotline at
888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov
Page 27 of 28
SVC2020-083 18 June 2020
1) If defective wheels are installed (left photo above),
2) Contact your local Vermeer dealer immediately to arrange installation of IK00-3922 Wheel and Tire
Assembly Replacement Kit.
3) Prior to having this field remedy kit installed,
a) If one or more lug nut is missing or loose, using a calibrated torque wrench, torque to 210 ft-lb (285
Nm).
b) Tire Pressure. If their pressure is not at 80 psi (550 kPa), the wheel may have a crack. The crack may
not be visible
c) Verify torque on each lug nut [210 ft-lb (285 Nm)] and tire pressure [80 psi (550 kPa)] as part of
your pre-trip inspection every day or at a minimum every 150 miles (250 km) until IK00-3922:
Wheel and Tire Assembly Replacement Kit is installed by your Vermeer dealer.
4) Do not tow the brush chipper without all lug nuts properly installed or with low tire pressure.
If properly manufactured wheels are installed (right photo on above), take photos of each wheel, complete
and return Page 2 of this Wheel and Lug Nut Inspection form and photos to: safetyform@vermeer.com. Vermeer
Corporation will record in its records that your brush chipper is not affected by this product safety recall and
mail a Vermeer Parts Certificate for $50.00 USD redeemable at your local Vermeer
dealer.
If you do not return this form or do not contact your Vermeer dealer, additional notices will be sent advising you
of this field campaign issue.
BC1500 WHEEL AND LUG NUT INSPECTION FORM
Using photos below, inspect each brush chipper wheel to determine if defective supplier wheels are installed
Defective Supplier Wheel
Improper Lug Nut Seat
and Potential Cracks
Identified by continuously raised lug nut surface
Properly Manufactured Wheel
Correct Lug Nut Seat
Identified by raised surface only around lug nut
location
Model: «Model»
This notice applies to your vehicle,
Serial No: «VIN»
Complete Page 2 ONLY if NO defective wheels are
installed on this brush chipper.
IMPORTANT
SAFETY
RECALL
First Notice
BC1500 Wheel and Tire
Assembly Replacement Kit
(IK00-3922)
Field campaign remedy is now available.
Vermeer Corporation
Product Safety Department
1210 Vermeer Rd East
Pella, IA 50219 USA
Email: safetyform@vermeer.com
Telephone: 641.621.7060
Toll Free: 800.829.0051
Page 1
Vermeer· y
Page 28 of 28
SVC2020-083 18 June 2020
Enter date signed
below:
I certify that the documents attached to this Wheel and Lug Nut Inspection form are
true and accurate.
X
Sign on the line above.
Print name here:
Vermeer Corporation will mail $50.00 USD Vermeer
Parts Certificate for your inspection finding no
defective wheels. Please allow 2-4 weeks for processing. Thank you for your cooperation.
1) Take photos of each wheel.
2) Complete this page 2 of Wheel and Lug Nut Inspection form.
3) Email photos and form to: s afetyform@vermeer.com
Wheel inspection
results:
Wheel 1 No defective wheel installed
Wheel 2 No defective wheel installed
If either of the 2 wheels on your brush chipper are defective (photo on left on Page 1),
contact your Vermeer dealer immediately to have IK00-3922 installed on your brush chipper.
Contact Name:
Contact Email:
Company:
Address:
City, State, Postal
Code, Country:
Model: «Model»
This notice applies to your vehicle,
Serial No: «VIN»
IMPORTANT
SAFETY
RECALL
First Notice
BC1500 Wheel and Tire
Assembly Replacement Kit
(IK00-3922)
Field campaign remedy is now available.
Vermeer Corporation
Product Safety Department
1210 Vermeer Rd East
Pella, IA 50219 USA
safetyform@vermeer.com
Telephone: 641.621.7060
Toll Free: 800.829.0051
Page 2
Vermeer Corporation, Product Safety Department
1210 Vermeer Rd East, Pella, IA 50219 USA
Email: safetyform@vermeer.com
Telephone: 641.621.7060 – Fax: 641.621.8562 – Toll Free: 800.829.0051
Vermeer· y
Safety Bulletin
RCSB-20V085-1850.pdf 1862.163KB
- For Select Aftermarket and Factory Wheels.
- Specifications: M12 x 1.50 Thread Pitch, 1.40” Overall Height, 0.90" Diameter, 3/4" Hex, 60° Conical Seating, Bulge Acorn.
- Features: Cold forged carbon steel and tested to industry standards. Durable construction. Stylish chrome or black chrome finish. Utilizes traditional hex-body bulge-acorn design for fast and easy installation.
- ATTENTION: Refer to the owner’s manual or the wheel manufacturer’s guide for the correct thread size, seat style, length, hex and torque specifications. You assume all liability of improper installation which can result in accident and/or injury.
- 1 year manufacturer warranty. Always check your vehicle fitment before purchasing! Contact cs@whtknight.com for warranty replacement or fitment issues.
- For Select Aftermarket and Factory Wheels.
- Specifications: M12 x 1.50 Thread Pitch, 1.40” Overall Height, 0.90" Diameter, 3/4" Hex, 60° Conical Seating, Bulge Acorn.
- Features: Cold forged carbon steel and tested to industry standards. Durable construction. Stylish chrome or black chrome finish. Utilizes traditional hex-body bulge-acorn design for fast and easy installation.
- ATTENTION: Refer to the owner’s manual or the wheel manufacturer’s guide for the correct thread size, seat style, length, hex and torque specifications. You assume all liability of improper installation which can result in accident and/or injury.
- 1 year manufacturer warranty. Always check your vehicle fitment before purchasing! Contact us for warranty replacement or fitment issues at cs@whtknight.com
- For Select Aftermarket and Factory Wheels.
- Specifications: M12 x 1.50 Thread Pitch, 1.40” Overall Height, 0.90" Diameter, 3/4" Hex, 60° Conical Seating, Bulge Acorn.
- Features: Cold forged carbon steel and tested to industry standards. Durable construction. Stylish chrome or black chrome finish. Utilizes traditional hex-body bulge-acorn design for fast and easy installation.
- ATTENTION: Refer to the owner’s manual or the wheel manufacturer’s guide for the correct thread size, seat style, length, hex and torque specifications. You assume all liability of improper installation which can result in accident and/or injury.
- 1 year manufacturer warranty. Always check your vehicle fitment before purchasing! Contact cs@whtknight.com for warranty replacement or fitment issues.
- Specifications:Closed End Bulge Acorn Style Lug Nuts - M12x1.5 thread size - Conical 60 Degree Seat - 3/4"(19mm) hex size - 1.4 inch(35.56mm) Overall Length - 22.1mm Overall Diameter
- Packaging:20 Chrome Closed End Bulge Acorn Lug Nuts for Aftermarket Wheels Only
- Vehicles Fits:Vehicles with wheel studs requiring a 12x1.5 thread,and wheels that take a conical 60 degree seat with a 3/4" hex, not fit mag seat,ball seat and round seat
- Process and Meterial:Manufactured with SCM 435 cold forged steel. Additional Heat Treating ensures dependable strength & durability. Precisely machined threads ensure a perfect fit on your vehicle's wheel studs. Special coating provides exceptional corrosion resistance and appearance
- Service:All FLYCLE lug nuts will provide 12 months of after-sales service . If you have any questions about our products, we will provide you with professional technical support.
- One-piece Solid lug nuts feature durable design and provide perfect Replacement for Infiniti
Q70, Q45, Q50, G37, I30. Nissan
350Z, 370Z, 200SX. Subaru
Forester, BRZ, Outback, WRX, Legacy and more.
- Specifications: 12x1.25 Thread Pitch; 13/16'' (21mm) Hex; 1.49" (38mm) OAL; Closed End; Color: Chrome.
- 10.9-grade Heat-treated premium steel construction, which offers better durability and strength.
- The product contains 20 high quality mag lug nuts, these lug nuts are manufactured with the highest quality to meet or exceed OEM Standards, perfect for replacing rusted and/or broken lug nuts.
- No Reason Return in 30 Days, 12 Month Warranty! If you have any problem, feel free to contact us
- For Select Aftermarket Wheels, replacement key adaptor is B07PY59X14 (3800L)
- Specifications: M14x1.50 Thread Pitch, 2.0” Overall Height, 0.90" Diameter, 7 Spline Drive, 60° Conical Seating, Duplex Spline Acorn.
- Features: Cold forged carbon steel and tested to industry standards. Durable construction with stylish chrome or black chrome finish. Utilizes 7 spline key adaptor for fast and secure installation
- ATTENTION: Refer to the owner’s manual or the wheel manufacturer’s guide for the correct thread size, seat style, length, hex and torque specifications. You assume all liability of improper installation which can result in accident and/or injury.
- 1 year manufacturer warranty. Always check your vehicle fitment before purchasing! Contact cs@whtknight.com for warranty replacement or fitment issues.
- SET OF 20 LUG NUTS: This package includes 20 Orion Motor Tech M12 x 1.5 lug nuts with a mag seat (1.46" long by 1.17" wide) and instructions for use to get all your wheels back on the road as soon as possible
- WIDE APPLICATION: These 12mmx1.5 wheel nuts fit a wide range of models. Compatible with Toyota
Avalon, Camry, Highlander, Prius, Sienna. Lexus
IS300, LFA, CT200h, HS250h, GS450h. Mitsubishi
Lancer, Eclipse, Outlander, Galant. Scion
xB, tC, iM, xD and more
- CHROME-PLATED Q235 STEEL: Our mag lug nuts are each made from a single piece of premium Q235 steel that has been cold-forged and heat treated for superior strength and longevity; their chrome plating further improves their corrosion resistance
- PRECISION ENGINEERED: To ensure your safety, our lug nuts are manufactured and tested at the highest standard to meet and even exceed OEM quality and performance at a fraction of their price
- PRECISION THREADS: The superior thread engagement enables your car to withstand the rigors of daily driving; add them to your car today and enjoy the ride!
- Specifications: M14X1.5 thread - closed end bulge style lug nuts - conical 60 degree seat - 1.8" 45mm long - 3/4" 19mm hex - 0.9" 23mm wide - color: silver / chrome. For Conical Required Wheel with 23mm Flange Limit Only Aftermarket Wheel
- Vehicle Models: Replacement for Chevy Avalanche/Blazer/Colorado/Equinox/Express 2500/Silverado 1500,2500,3500/Suburban 1500,2500,3500/Tahoe/Traverse. For GMC
Acadia/Canyon/Savana 1500/Sierra 1500,2500,3500/Terrain/Yukon/Yukon XL/Yukon XL 1500
- We are Different: After 72 hours of strict salt spray test, makes the nut resistant to oxygen and corrosion, gives the nut a bright visual impact. Using infrared drying technology, the paint is integrated with the metal and will not fall off easily
- One-Piece Nuts: The one-piece structure design is more splendid and safer than the two-piece design. Thick coating, cold forged and heat treated steel soild lug nuts, anti-rusting and anti-stripped, high strength and durability
- Brand Support: At MIKKUPPA, we are dedicated to delivering top-quality wheel lug nuts and exceptional customer service. Our commitment to enthusiastic support for 12 months ensures a worry-free shopping experience
- SET OF 20 LUG NUTS: This package includes 20 Orion Motor Tech M12 x 1.25 lug nuts with a mag seat (1.46" long by 1.16" wide) and instructions for use to get all your wheels back on the road as soon as possible
- WIDE APPLICATION: These 12mmx1.25 wheel nuts fit a wide range of models. Compatible with Infiniti
Q70, Q45, Q50, G37, I30. Nissan
350Z, 370Z, 200SX. Subaru
Forester, BRZ, Outback, WRX, Legacy and more. See below for full and exact fitment information
- CHROME-PLATED Q235 STEEL: Our mag lug nuts are each made from a single piece of premium Q235 steel that has been cold-forged and heat treated for superior strength and longevity; their chrome plating further improves their corrosion resistance
- PRECISION ENGINEERED: To ensure your safety, our lug nuts are manufactured and tested at the highest standard to meet and even exceed OEM quality and performance at a fraction of their price
- SATISFACTION GUARANTEED: Orion Motor Tech backs these parts with its usual strong warranty and friendly 24/7 customer service, ensuring that you'll enjoy their use for years to come
- Fitment: Vehicles with wheel lug nuts requiring a 14-1.5 thread(8 lugs) and take a flat/mag seat, compatiable with 2017-2022 F-ord F250 & F350, oem number is HCPZ-1012-B, HCPZ-1012-A please check the seat type of your original lug nuts firstly before placing your Order
- Specification: Thread pitch M14X1.5, Overall tall 1.9"(48.5mm), Diameter 1.24"(31.5mm), Closed end, flat/mag seat, separated and protected in pearl cotton box (handwrench recommended, don't use the impact tool)
- Performance: One-piece structure design, better than original "cap" style (two piece design) which is more safer while you are installing the lug nuts, high standward QC/QA control, all of our products past 72 hours salt spray tested which can promise a longer service life compared to 48 hours for others
- Premium Material: Cold Forged Alloy Steel(High Strength and Durability), quality durable surface dealing process, clear and clean pitch thread. Chrome plated can greatly improves rust&corrosion resistance and prevent the outer layer peeling easily
- Brand Promise: We hope that dynofit can make your shopping experience enjoyable. Feel free to contact us if you have any problems(missing parts, quality issues, transportation and more)
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.