โThis site contains affiliate links for which OEMDTC may be compensatedโ |
March 3, 2021 NHTSA CAMPAIGN NUMBER: 21V133000
Flexible Section Of Exhaust System May Separate
An exhaust gas leak in the engine compartment increases the risk of a fire.
NHTSA Campaign Number: 21V133
Manufacturer Altec Industries, Inc.
Components ENGINE AND ENGINE COOLING
Potential Number of Units Affected 355
Summary
Altec Industries, Inc. (Altec) is recalling certain 2017-2019 DC1317 and DRM12 Chippers equipped with a gasoline engine. The flexible section of the exhaust pipe may separate, creating an exhaust gas leak.
Remedy
Altec will notify owners, and owners will receive instructions to replace the flex pipe, free of charge. The recall began April 28, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec’s number for this recall is CSN 802.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
IMPORTANT SAFETY RECALL
This notice applies to your vehicle. See attached serial number list.
NHTSA Safety Recall
No. 21V-133
April 30, 2021
Dear Altec Owner,
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act, and Canada Motor Vehicle Safety Act.
Altec Industries, Inc. has decided that a defect which relates to motor vehicle safety exists in certain DC1317 and DRM12 chippers equipped with a Kubota gas engine. This includes units built prior to June 2018 that had an engine enclosure update kit installed according to SIL 681 and certain units built between June 2018 and June 2019. The flexible section of the exhaust pipe can separate and create an exhaust gas leak in the engine compartment, creating the risk of a fire.
Refer to CSN 802 for the items covered under the warranty policy. Altec will supply the necessary parts to correct this condition free of charge.
In order to determine if your unit is affected by CSN 802, compare the VIN number of your unit with the list of affected units attached to the CSN. The repair can be performed by the customer or you may contact Altec at 1-877-GO-ALTEC (1-877-462-5832) for further assistance. The repair is expected to take 1 hour to complete.
At any time, you may contact Altec at 1-877 GO ALTEC (1-877-462-5832) with your unitโs serial number to determine if there are any other outstanding notices.
For US owners: after contacting Altec, if you are still not able to have the safety condition remedied without charge and within a reasonable time, you may submit a complaint to: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, DC 20590 or call toll-free 1-888-327-4236 (TTY: 1-800-424-9153) or go to https://www.safercar.gov.
For Canadian Owners: if you are still not able to have the safety condition remedied by your dealer within a reasonable time, please contact Altec Customer Service at 1-877-GO-ALTEC (1-877-462-5832).
If you had this repair performed before you received this letter, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall. If you have sold or retired the unit, please call Altec at 1-877-GO-ALTEC (1-877-462-5832) so the records may be changed.
If you have leased this equipment to another person or company, you are required by Federal Law to forward a copy of this notice to the lessee by first class mail within ten (10) days of the receipt of this notice.
We are sorry to cause this inconvenience; however we are taking this action in the interest of your safety and continued satisfaction with Altec products.
Thank you for your immediate attention on this important matter.
CSN 802
Customer Service Notice
April 30, 2021
Units Affected: Certain DC1317 and DRM12 chippers equipped with a Kubota gas engine. This includes units built prior to June 2018 that had an engine enclosure update kit installed according to SIL 681 and certain units built between June 2018 and June 2019 (Verify that your unit VIN number is affected by reviewing the attached list in this CSN or by accessing your fleet on connect.altec.com/login)
Exhaust System Update
Altec is committed to providing our customers safe and reliable products from initial delivery throughout the useful life of the unit.
Altec has discovered that the flexible section of the exhaust pipe can separate and create an exhaust gas leak in the engine compartment on the affected units. An exhaust gas leak in the engine compartment creates the risk of a thermal event. Injury and property damage can result from a thermal event in the engine compartment.
A kit has been developed by the engine supplier to replace the flexible section of the exhaust pipe with an improved version. Altec requires that the kit be installed on each unit no later than the next regular maintenance interval or 90 days of the receipt of this CSN, whichever comes first. Order the Chipper Exhaust Flex Pipe Kit, part number 991309526, by calling 1-877-GO ALTEC (1-877-462-5832).
This repair is covered under the Altec Warranty Policy and can be performed by Altec, the customer, or the customerโs warranty provider. Altec will perform the repair for free at an Altec facility. If the customer, or the customerโs warranty provider performs the repair, a warranty claim must be submitted to be reimbursed for the cost of the parts and/or labor. Altec will allow up to $90 for the labor to perform this repair. Call 1-877-GO ALTEC (1-877-462-5832) to schedule the work to be done by an Altec service technician. Customers are responsible for the travel costs of an Altec Mobile Service technician if the technician performs the repair at the ownerโs location.
Altec Use Only | |
Inspection labor | 0.0 hr |
Repair labor | 1.0 hr |
Account # | 010.0690.43151.523.0000.000 |
Travel | Not included |
NHTSA code | 06 |
Prime fail P/N | N/A |
Doc ref | N/A |
6 Affected Products
Vehicles
7 Associated Documents
Recall Quarterly Report #1, 2021-2
RCLQRT-21V133-2876.PDF 211.142KB
Defect Notice 573 Report
RCLRPT-21V133-5125.PDF 212.808KB
Recall Acknowledgement
RCAK-21V133-2734.pdf 645.607KB
Recall 573 Report- Amendment 1
RCLRPT-21V133-1993.PDF 213.648KB
ISSUED Owner Notification Letter(Part 577)
RCONL-21V133-7727.pdf 769.229KB
Recall Quarterly Report #3, 2021-4
RCLQRT-21V133-2769.PDF 211.328KB
Recall Quarterly Report #2, 2021-3
RCLQRT-21V133-3082.PDF 211.243KB
Latest Recalls Documents
โThis site contains affiliate links for which OEMDTC may be compensatedโ |
- Built for Demanding Tasks - Double reinforced blades (20M0409) paired with six J-hammer cutters deliver industrial-grade shredding power. The 2-bushel collection bag handles continuous operation, ideal for forestry maintenance, large gardens, and commercial landscaping projects.
- High-Performance Engine - A 224cc 7.5HP OHV engine generates 9.96 ft-lbs torque at 4,000 RPM, optimized by a 15:1 gear reduction system. The 0.9-gallon fuel tank ensures extended runtime with standard unleaded gas, balancing power and efficiency.
- Dual-Function Processing - Process 3-inch branches through the side chute for instant wood chips, while the top hopper shreds leaves/soft debris into mulch. Creates compact biomass fuel or garden bedding in one pass.
- Maintenance-Minded Engineering - Quick-access inspection window simplifies blade changes and jam clearing (note: vacuum kit sold separately). Safety-first design recommends PPE gloves/goggles during operation.
- Critical Usage Guidelines - Please avoid using wet wood, vines, or fibrous materials to prevent clogs. as they may cause the machine to jam and fail. We offer a 90-day warranty against defects in materials and workmanship from the date of purchase.
- C30 LITE Wood Chipper Gas Powered combined with Bigger 11.8 inch Cutting Rotor than other Mini
similar chippers that provides more stable speed and the latest durability upgrade high-speed steel blades, equipped with powerful recoil starting 7HP 212cc Horizontal 4-stroke Single Cylinder OHV Engine with reliable quality and superior performance, makes chipping easy with 3600 RPM MAX speed.
- This Mini
Wood Chipper Shredder Mulcher is more emphasis on service life, more lightweight and durable. Small but still excellent core functions make more fast, easy and efficient chipping and less required space. Capable of high volume Chipping/Shredding/Mulching with a Reduction Ratio of 15:1 up to 3" MAX branches, limbs and debris. Compact design gives you portable move and store.
- Built with newly upgraded reinforcement of welding and metal, come with constantly improved manual and instructions to make easier to assemble and start. Unique Designed Check Windows for faster blades replacement; Large Extended Feeding hopper makes it easier to feed big branches with twigs; Highly desirable Vertical Extended Discharge Chute with Adjustable Discharge Guide to deliver accurate debris discharge, with an angled range of 90ยฐ-145ยฐdegrees.
- Always operate according to directions outlined in the user manual, always wear the appropriate hand and eye protection; Can be used to aid in fire prevention and building firebreaks; EPA/CARB Certified. Use for Forestry, Gardens, Landscaping or Green Waste Recycling to chip tree branches/limbs, shred brush, mulch leaves and corn stocks; DO NOT use for: fresh greens, pine cones, palm branches (fronds will jam), petrified wood or vines.
- Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended). Max capacity: [Fuel 0.73 gal/2.8L] & [Oil 0.13 gal/0.5L]. ENGINE OIL NOT INCLUDED.1-Year Warranty by EFCUT After Product Registration against machine construction(except blades etc. consumables). In case you meet any questions, please feel free to send a message to EFCUT Customer Support, EFCUT will provide prompt support for you.
- Powerful 15-amp motor shreds branches and sticks up to 1. 75" inch thick
- Chute and tamper tool to keep your hands free and safe from the corded electric chipper/shredder
- Easy clean-up with the 1.2 Bushel collection bin
- Electric corded chipper/shredder shreds sticks to a fine ratio, great for composting
- Durable back wheels that offers easy portability on the electric corded chipper/shredder
- POWERFUL PERFORMANCE: 15-AMP motor shreds branches up to 1.8-inches in thickness into garden mulch
- INCREDIBLE CUTTING EFFICIENCY: 2-sided blade boasts a speed of 3700-RPM
- TURN MESSES TO MULCH: Reduce 14 bags of bulky yard debris into 1 bag of nutrient-rich mulch
- QUALITY MATERIALS: Designed with durable, dent-resistant polypropylene material
- EASY TO OPERATE: Confidently insert debris into the chipper shredder with the included push paddle
- EFFICIENT SHREDDING: Powerful 15-Amp/1800 Watt motor effectively chips and shreds branches up to 1.77 inches diameter
- REDUCE, REUSE, RECYCLE: Quickly reduce yard waste to 1/21th its original size and turn leaves, twigs, brush, and branches into nutrient-rich mulch to boost garden health and appearance
- SAFETY ENSURED: Equipped with a safety hopper and locking knob that halts operation when opened, ensuring peace of mind during use, with 50L collection bag
- ULTRA PORTABLE: Compact design featuring 7-inch wheels to easily move and store this chipper/shredder wherever needed
- EASY TO USE: Enjoy a garden cleanup solution that's easy to assemble, virtually maintenance-free, and ready to tackle yard waste immediately
- Turn your excess lawn clippings, twigs and foliage into high-grade nutrient-rich mulch
- Shred sticks and branches up to 1.5 inches in diameter with ease
- 15-Amp motor provides up to 8000 cuts per minute (over 130 cuts per second)
- Internal safety mechanism automatically prevents startups when the hopper is still open
- POWERFUL - This Wood Chipper Shredder Mulcher has an all powerful recoil starting AlphaWorks 7HP Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine producing 3600RPMs & a rowdy 10.7 ft lbs of torque, handling up to 3" diameter wood without a problem
- EFFFICIENT PERFORMANCE - This Mini
Wood Chipper Shredder Mulcher design has a Reduction Ratio of 15:1, capable of high volume Chipping/Shredding/Mulching via the Large Extended Feeing Hopper Chute for up to 3" inch MAX branches, limbs and garden debris
- UNIQUE DESIGN - Built to be compact and lighter than other steel chippers, this design has a highly desirable Vertical Extended Discharge Chute with Adjustable Discharge Guide to deliver accurate debris discharge, with a angled range of 90ยฐ-145ยฐ degrees; User-Friendly features like the Easy-Pull Recoil Starter & easy pour Accu-Fill design
- SAFETY - Always operate according to directions outlined in the user manual, always wear the appropriate hand and eye protection (ENGINE OIL NOT INCLUDED); Can be used to aid in fire prevention and building firebreaks; Emission Compliant with CARB PHASE III & EPA Phase III; Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended)
- BEST APPLICATION - Use for Forestry, Gardens, Landscaping or Green Waste Recycling to chip tree branches/limbs, shred brush, mulch leaves and corn stocks; DO NOT use for: fresh greens, pine cones, palm branches (fronds will jam), petrified wood or vines
- Smooth Discharge: This electric wood chipper features a 21:1 reduction ratio and an anti-jamming design to ensure a smooth flow of shredded material from the discharge chute
- Great Cutting Performance: This wood chipper, powered by a robust 15-amp motor with a maximum speed of 4000RPM, features SK5 high-hardness rust-resistant dual-edge blades, ensuring it effectively shreds sticks and branches up to 1.8โ in diameter
- Durable and Affordable: This wood chipper is designed for yard work and is more budget-friendly than traditional gas-powered models. It features IPX4 waterproofing and a dent-resistant polypropylene housing, ensuring reliability and durabilityโideal for all your gardening needs
- Easy Maintenance: Key replacement parts for wear and tear are available at the YERYORK Amazon store. Once received, you can easily replace them following the user manual while the machine is powered off, ensuring your work schedule isnโt delayed
- Easy to Use: This wood chipper features a lightweight, easy-to-assemble design with dual feed chutes for effortless wood loading. It also comes with 7-inch wheels for easy mobility and chipper storage
- Powerful & Durable: Powered by a robust 15 AMPS motor, this wood chipper generates speeds up to 4200 RPM and effectively shreds wood sticks and branches up to 1.57" thick; Steel dual-edge blades and rustproof, dent-resistant polypropylene housing ensure reliability and durability
- Value Pack with Complete Accessories: Package includes a 50L collection bag for easy debris collection, a cleaning rod for safe material feeding, a pair of replacement blades and carbon brushes for easy maintenance, and gloves and goggles for better protection
- Maneuverable & Compact: The large 6.5โ diameter combined with the streamlined, rugged frame enable smooth transportation across various terrains; Compact size allows for easy repositioning and tidy storage
- Safe Operation: Equipped with overload protection, this shredder automatically cuts off power to protect the unit when overloaded; UL-certified power cord and waterproof plug allow for safe outdoor use and prevent short circuits caused by sudden rainfall; A locking knob prevents users from getting hurt during operation
- Reliable Gardening Helper: Featuring a quick setup process and powerful performance, this branch shredder rapidly converts your yard waste into nutrient-rich mulch; Perfect for shredding and reusing all the twigs, branches, leaves, roots, bushes trimming waste that used to overcrowd your garden or yard
- Efficiency Meets Durability: Our wood chipper shredder mulcher features an efficient Cutting Roller design with Durable Double Lasting, ensuring rapid branch processing and enjoying the convenience of easy operation, maintenance, and blade replacement. Designed with user safety in mind, keeps users at a safe distance from blades and rollers, reducing operational risks. Handle wood tasks effortlessly with its versatile wood handling capabilities.
- Compact and Powerful: With a 3" Diameter Max capacity and an impressive 15:1 waste reduction ratio, this wood chipper is both compact and highly efficient. Its Long Neck Chute simplifies loading, and assembly remains quick and straightforward. When not in use, its foldable design minimizes storage space requirements. Get the job done with ease and efficiency.
- Robust and Reliable: EFCUT Wood Chipper features a quick recoil starting 7HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas-powered Engine with 3600 RPM MAX speed, ensuring efficient and easy operation. The low oil alert sensor provides effective protection against damage. Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended). Max capacity: [Fuel 0.73 gal/2.8L] ; [Oil 0.13 gal/0.5L]. ENGINE OIL NOT INCLUDED.
- Best Application: Always operate according to directions outlined in the user manual, always wear the appropriate hand and eye protection; Can be used to aid in fire prevention and building firebreaks; EPA/CARB Certified. Use for Forestry, Gardens, Landscaping or Green Waste Recycling to chip tree branches/limbs, shred brush, mulch leaves and corn stocks; DO NOT use for fresh greens, pine cones, palm branches (fronds will jam), petrified wood or vines.
- Trustworthy Support: 1-Year Warranty by EFCUT After Product Registration against machine construction(blades etc. consumables excluded), giving you peace of mind and confidence in its durability and performance. In case you have any questions, please feel free to send a message to EFCUT Customer Support, EFCUT will provide prompt support for you.
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.