| “This site contains affiliate links for which OEMDTC may be compensated” |
June 28, 2021 NHTSA CAMPAIGN NUMBER: 21V487000
An improperly aligned rear axle may cause a loss of vehicle control, increasing the risk of a crash.
NHTSA Campaign Number: 21V487
Manufacturer Gillig
, LLC
Components SUSPENSION
Potential Number of Units Affected 86
Summary
Gillig, LLC (Gillig) is recalling certain 2020-2021 Low Floor Diesel, CNG, and Battery Electric buses. The rear axle may come out of alignment during operation.
Remedy
Gillig will install a new locknut, free of charge. Owner notification letters were mailed on July 19, 2021. Owners may contact Gillig’s customer service at 1-510-264-5073 or 1-800-735-1500.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
6 Affected Products
Vehicles
5 Associated Documents
Recall Acknowledgement
RCAK-21V487-1166.pdf 646.341KB
Loading...
Reload document 
Open in new tab
Defect Notice 573 Report
RCLRPT-21V487-2399.PDF 215.283KB
Loading...
Recall Quarterly Report #2, 2021-4
RCLQRT-21V487-1453.PDF 211.207KB
Loading...
Recall 573 Report- Amendment 1
RCLRPT-21V487-5986.PDF 215.5KB
Loading...
Recall Quarterly Report #1, 2021-3
RCLQRT-21V487-0771.PDF 211.105KB
Loading...
Latest Recalls Documents
- Contains extraordinary anti-wear and lubricity agents, ensuring exceptional protection against wear and reducing drag
- Helps to control heat
- Incorporates Lucas cutting-edge additive technology derived from top-rated Lucas Heavy Duty Oil Stabilizer, the number one supplemental oil in the heavy-duty industry
- Available in 1 quart and 1 gallon bottle sizes
- Protects Against Severe Temperatures To Help Extend Service Life
- Formulated With Extreme-Pressure Additives To Minimize Gear Wear From Shock Loads
- Helps Protect Against Gear Wear From Scuffing, Scouring, Corrosion And Pitting
- Recommended For Conventional Hypoid Differentials And Non-Synchronized Manual Transmissions In Passenger Cars, Light Trucks, Sport Utility Vehicles, Vans And Heavy-Duty Trucks Where An Api-Gl5 Or Gl-4 Fluid Is Specified
- Contains extraordinary anti-wear and lubricity agents, ensuring exceptional protection against wear and reducing drag
- Helps to control heat
- Incorporates Lucas cutting-edge additive technology derived from top-rated Lucas Heavy Duty Oil Stabilizer, the number one supplemental oil in the heavy-duty industry
- Available in 1 quart and 1 gallon bottle sizes
- Works in tight spaces and makes gear oil easier to use.Fit Type: Universal
- Full Synthetic formula for exceptional high and low temperature protection
- Contains an extreme pressure additive for better load carrying capacity and wear protection
- Excellent thermal stability designed to protect oil from high temperature breakdown
- Formulated for ultimate gear protection and performance
- WIDEST SPEC RANGE ON THE MARKET: widely compatible with a very large number of hypoid gear systems, differentials, transmissions and axle assemblies.
- SEVERE SERVICE MAX: Exceptional shear stability and oxidation resistance. Polyphosphate EP proprietary additive system offers substantial improvement in performance over previous generation, low cost, gear oils
- BUILT IN LIMTED SLIP ADDITIVE - Does not require "additional" LS additive. Its built into the product, optimized for all limited slip differentials, including those with built in wet brakes.
- OUTSTANDING SCUFFING PROTECTION - Superb gear and syncron protection, facilitating extremely long transmission life. Exceeds Load Stage 13 extreme pressure requirements beyond 120,000 lbs / sqi.
- SHEAR STABLE - Excellent thermal stability and high load capacity without viscosity breakdown, facilitates excellent film strength under high loads, high temp and high shear conditions.
- Direct replacement for Mercury Marine 858058K01
- Provides maximum protection against excessive wear, corrosion and pitting for extended gear life in marine applications
- Contains additives to protect gears if water enters the gear case or lower unit
- Recommended for use in outboard motor gear cases and marine lower units in applications below 75hp
- 80W-90 viscosity
- Product Type :Auto Accessory
- Package Dimensions :8.89 Cm L X10.922 Cm W X30.48 Cm H
- Country Of Origin :United States
- Package Weight :2.0Lbs
- EXTREME-PRESSURE PERFORMANCE: U1P-Gear 80W90 Gear Oil, API GL-5, defends against high-speed, low-speed, and high-torque conditions, minimising wear from shock loads with superior anti-scuffing additives.
- TEMPERATURE RESILIENCE: With exceptional thermal stability, our 80W-90 differential fluid safeguards against severe temperatures, ensuring longevity and cleanliness for extended service life.
- PRECISION WEAR PROTECTION: Formulated with anti-wear additives, this API GL5 gear oil shields gear teeth from pitting, spalling, and scouring, offering advanced protection against scuffing, corrosion, and chattering.
- VERSATILE APPLICATION: Recommended for conventional hypoid differentials and manual transmissions, this product is ideal for passenger cars, trucks, SUVs, and vans, meeting API GL5 / GL4 gear oil specifications.
- SHEAR STABILITY AND ANTI-CORROSION: The shear-stable formulation resists rust, oxidation, foaming, and varnish, guaranteeing reliable performance and corrosion protection in diverse driving conditions.
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.