2018-2022 Tiffin Wayfarer Holding Tank Could Drop Onto Exhaust Pipe

“This site contains affiliate links for which OEMDTC may be compensated”

September 28, 2021 NHTSA CAMPAIGN NUMBER: 21V753000

Holding Tank Could Drop Onto Exhaust Pipe

The tank falling onto the exhaust can affect vehicle stability, and increase the risk of a crash.

 

NHTSA Campaign Number: 21V753

Manufacturer Tiffin MotorhomeseBay, Inc.

Components EQUIPMENT

Potential Number of Units Affected 2,461

 

Summary

Tiffin MotorhomeseBay, Inc. (TiffineBay) is recalling certain 2018-2022 Wayfarer vehicles. The rear-center holding tank water pan bolts may pull through the lip of the pan, allowing the tank to drop down onto the exhaust pipe.

 

Remedy

Dealers will inspect and as necessary, replace any damaged holding pans. In addition, metal straps and a washer plate will be installed. Repairs will be performed free of charge. Owner notification letters were mailed November 29, 2021. Owners may contact TiffineBay customer services at 1-256-356-8661. TiffineBay’s number for this recall is WAY-102.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


2022 Tiffin Wayfarer
2022 TiffineBay Wayfarer

 


Recall Inspection and Repair Instructions

NHTSA Recall #:  21V-753

TiffineBay Wayfarer Recall #:  WAY-102

Models Involved:   2018 24FW Wayfarers, 2019 24BW, 24FW, 24TW, 25QW & 25RW Wayfarers, 2020 24TW, 25QW, 25RW Wayfarers, 2021 25RW, 25SW. 25TW Wayfarers & 2022 25RW, 25SW & 25TW Wayfarer Motorhomes.

 

Tools Needed:  

 

Parts Needed:

  • 4 of #5109971 Strap for Tank Fresh WTR 1 of #5074043 Pan Trunk Fresh WTR RW/FW 35½ X 28½, if needed (see inspection notes)
  • 8 of grade 5, 3/8-inch bolts & serrated flange nuts
  • 2 of #5124435, washer plate

 

FLAT RATE CODES AND TIMES

When filing the warranty claim for payment please use the following flat rate codes and times.

If no damage to the water pan use code WF8804RC01, for 0.50 hours

If the water pan is replaced, use WF8805RC01, for 2.00 hours

 

Inspection Instructions/Procedure:

1. Inspect the condition of the water pan for the fresh water tank for signs of cracks or damage. If there is damage, the water pan will need to be changed.  If there is no damage, the pan will not have to be changed out.

2. If the water pan is damaged, please contact Wayfarer at 205-487-4710 for parts and authorization.

3. Please note that some units will already have some straps installed due to previous repairs. For the purpose of this recall, all units will need to have 4 straps and 2 washer plates, part # 5124435, installed.  Please order and install the additional parts as needed.

 

Repair Instructions/Procedure:

After inspecting the water pan, please contact Wayfarer at 205-487-4710 to order the parts needed to complete the appropriate repair.

 

For Units that need the water pan replaced:

1. Remove dump hose carriereBay (Photo 1) and generator exhaust parts (Photo 2) if the unit is equipped with those options.

 

2. Disconnect the tank heater and sensor.

3. Undo 4 screws holding 7-pin electrical harness to bracket on hitch.

4. To remove the water pan from the rear side, the hitch will have to be loosened or removed. If the hitch is loosened instead of removed, loosen the bolts (Photo 3) on either the drivers or the passengers’ side until there is about ¼ inch of space between the hitch and the frame rail extensions, remove the existing bolts forward and rear of the pan and then remove the damaged water pan.

 

5. Position the new water pan in place and brace the pan with a floor jack (Photo 4) to keep the pan from falling.

 

6. Install 4 silver straps, part # 5109971, one strap on each bolt on the forward side of the tank. The straps will be secured between the lip of the water pan and the washer plate, part # 5124435. (Photo 5)

 

7. Install 4 bolts on the forward side of the water pan.

8. Install the other end of the silver support straps at the rear of the water pan, one to each bolt and secured between the lip of the water pan and the washer plate, part # 5124435. (Photo 5)

9. Install 4 bolts on the rear side of the water pan.

10. Drop and remove the floor jack.

11. Reconnect the tank heater and sensor.

12. Replace the hanger for the dump hose carriereBay and generator exhaust parts, if needed.

13. Re-torque the hitch bolts to 85-foot pounds.

14. Reinstall the 7-pin electrical connector harness

 

For Units that need the extra support only:

1. Remove dump hose carriereBay (Photo 1) and generator exhaust parts (Photo 2) if the unit is equipped with those options.

2. Undo 4 screws holding 7-pin electrical harness to bracket on hitch.

3. Use a floor jack to secure the water pan. (Photo 4)

4. Remove the 4 bolts at the forward side of the water pan.

5. Install 4 silver straps, part # 5109971, one strap on each bolt. The straps will be secured between the lip of the water pan and the washer plate, part # 5124435. (Photo 5)

6. Install new bolts on the forward side of the water pan and tighten.

7. Remove the hitch or loosen the hitch on either the drivers or passengers’ side until there is about ¼ inch of space between the hitch and the frame rail extensions. This will allow enough space to install the other end of the silver support straps to the rear of the water pan.

8. Remove the 4 bolts at the rear edge of the water tank.

9. Install the other end of the silver support straps to the rear side of the water tank, one strap to each bolt. The straps will be secured between the lip of the water pan and the washer plate, part # 5124435. (Photo 5)

10. Install new bolts on the rear side of the water pan and tighten.

11. Drop and remove the floor jack.

12. Replace the hanger for the dump hose carriereBay and generator exhaust parts if needed.

13. Re-torque the hitch bolts to 85-foot pounds.

14. Reinstall the 7-pin electrical connector harness.

 


IMPORTANT SAFETY RECALL NOTICE

This notice applies to your vehicle, identified by the VIN below

 

NHTSA Recall # 21V-753
TiffineBay Recall # WAY-102

 

November 29, 2021

 

Wayfarer Rear Center Water Pan Failure               

 

Dear Wayfarer Owner,

 

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.

 

Tiffin MotorhomeseBay has decided that a defect, which relates to motor vehicle safety, exists on the following models of Wayfarer motorhomes: 2018 24FW Wayfarers, 2019 24BW, 24FW, 24TW, 25QW & 25RW Wayfarers, 2020 24TW, 25QW & 25RW Wayfarers, 2021 25RW, 25SW & 25TW Wayfarers, and 2022 25RW, 25SW & 25TW Wayfarer Motorhomes.

 

It has come to our attention that on these certain Wayfarer Motorhomes, the area of attachment for the rear center water pan, which holds the rear center water holding tank in place, needs to be reinforced.   If the area of attachment is not reinforced, the rear center water pan may become loose from the frame of the motorhome which could cause the water holding tank to become loose or drop from the motorhome.

If the rear center water holding pan and rear center water holding tank were to become loose or break away, this could cause an accident which could lead to an injury.

 

Please arrange to take your motorhome to a reputable service center OR dealer of your choice to have the correction completed.  Please allow ½ an hour to have this repair completed, however if damage is found to the water pan, the water pan will need to be replaced and this could take up to 2 hours.  This work will be completed at no charge to you, the owner.

 

Once your appointment has been made, the dealer or service center you choose can contact Wayfarer Motorhomes to order parts, obtain working instructions and billing information.  They can contact Wayfarer by phone at 205-487-4710 or by email at winfieldservice@tiffinmotorhomes.com.

 

PLEASE NOTE: Parts will only be shipped to service centers or dealers.  Parts will not be shipped to owners.

 

If owners have paid in the past for any damages due to a failure of the rear center water holding pan, please submit a copy of the invoice that was paid by you, the owner, to the Wayfarer warranty department at the following address:   Wayfarer Warranty Department, 6524 State Hwy 129 North, Winfield AL 35594.  The Wayfarer Warranty Department may also be reached at 205-487-4710 or by email at winfieldservice@tiffinmotorhomes.com.

 

If you do not own the vehicle that corresponds to the identification number which appears on this Recall Notification, please return the notification to the TiffineBay Recall Department with any information you can furnish that will assist us in locating the present owner.  You may also email this information to recalls@tiffinmotorhomes.com.

If you are unable to have the defect remedied without charge and within a reasonable time after you tender the vehicle for repair, please contact the TiffineBay Warranty Department, at 1-256-356-8661, 8:00 a.m. to 3:30 p.m., Central Time.  You may also wish to notify the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington DC 20590, or phone 1-888-327-4236 (TTY: 1-800-424-9153):  or go to https://www.safercar.gov.

Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.

We regret any inconvenience this action may cause, but feel certain you understand our interest in motor vehicle safety.

 

Tiffin MotorhomeseBay Recall Department

 


Chronology :

June 25, 2021 VIN: was at Wayfarer Service Center. The issue was found on coach.

Subsequently, four more coaches were found to have the problem within a month. This was brought before the Safety Committee July 29, 2021. Investigation started. From July 30, 2021 until September 20, 2021 Engineering researched as to what was causing the problem and determined the scope of units involved.

Safety Committee voted on Sept. 21, 2021 to initiate a recall.

 


5 Affected Products

Vehicle

MAKEMODELYEAR
TIFFINeBayWAYFARER2018-2022

 


7 Associated Documents

Recall Quarterly Report #1, 2021-4

RCLQRT-21V753-0492.PDF 211.149KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.20 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-21V753-6015.pdf 184.308KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [179.99 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-21V753-9247.pdf 390.403KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [381.25 KB]

 


Recall Acknowledgement

RCAK-21V753-8228.pdf 679.466KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [663.54 KB]

 


Recall 573 Report

RCLRPT-21V753-6224.pdf 318.432KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [310.97 KB]

 


Recall Quarterly Report #2, 2022-1

RCLQRT-21V753-0596.PDF 211.246KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.29 KB]

 


Recall Quarterly Report #3, 2022-2

RCLQRT-21V753-2507.PDF 211.335KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.38 KB]

 


Recalls Documents

 


 

Bestseller No. 1
Ameri-Kart 19 Gallon RV Fresh Water Tank for Drinking and Potable Water, for Campers, Trailers, and RVs, WT-5450, 30-Inch x 16-Inch x 10-Inch
  • 19 GALLON TANK - Ameri-Kart Fresh water tanks are MADE IN THE USA - Fresh Water Tanks are for CLEAN DRINKING WATER USE - Perfect for motorhomes, trailers, tiny houses, RVs and camperseBay
  • EASY TO INSTALL - fresh water tanks are a critical component to all recreational vehicles - Fitting locations allow multiple options for installation. Built-in fittings include: (TWO) 1.5" balloon Style Threaded Female NPT standard - fittings are sealed, to use remove inner membrane with a razor knife. (TWO) 0.5" Threaded female NPT standard - fittings are plugged, to use remove threaded plugs. Hardware not included - DO NOT PRESSURIZE TANK. DO NOT HANG TANK BY STRAPS OR PLACE WEIGHT ON TANK.
  • DURABLE & RELIABLE - OEM quality tank made from weather resistant and impact-resistant plastics. RV Fresh Water Tank design prevents leaks and ensures long service life. Built to standards specified by IAPMO (InternationaleBay Association of Plumbing and Mechanical Officials).
  • NOT INCLUDED - hardware, mounting hardware, gate valves, piping, hoses, fittings
  • USA MADE - Proudly manufactured by Ameri-Kart in Elkhart, Indiana - the RV Capital of the World
SaleBestseller No. 2
Reliance Products Aqua-Tainer 7 Gallon Rigid Water Container, Blue , 11.3 Inch x 11.0 Inch x 15.3 Inch
  • Rigid, 7-gallon rectangular water container with molded contour grip
  • Space-saving design for easy storing and stacking when empty. Spigot cap is reversible for safe storage and transport
  • New and improved screw-on vent; hideaway spigot for on-demand water dispensing
  • Suitable for outdoors activities and emergency water storage
  • NOTE: Prolonged exposure to direct sunlight will cause the water container to degrade and become brittle, increasing the chance of leaks. It is highly recommended to store water containers in cool shaded areas.
Bestseller No. 3
30 Gallon RV Fresh/Gray Water Tank 34" x 18" x 12" - BPA Free (30 Gallon)
  • This 30 gallon water tank measures 34" x 18" x 12" (not including fittings)
  • All tanks come with (1) 1.25" water fill inlet and (3) 3/8" NPT connections. Non-Pressurized Tank - The tank must be vented
  • One piece seamless construction - No Seams to burst
  • These rotational molded fresh water tanks are made from a high quality durable polyethylene material.
  • Stain, corrosion and rust resistant features make them ideal for replacement or OEM installation on RVs, horse trailers or marine products.
Bestseller No. 4
Chapin 98142: 40-Gallon Water Storage Tank, Utility Water Tank, Water Supply, for Farms, Acreage, Gardens, Orchards, Translucent White
  • ACCESSIBLE UTILITY WATER AND EASY TO HAUL: 40-gallons of water for utility storage; translucent poly tank allows you to see liquid levels; carry it on a truck, tractor, or trailer whenever and wherever you need it; it’s your water system on the go
  • STORAGE SPECS: poly tank is chemical-resistant with fade-resistant, UV protection; nitrile seals handle water; 6-inch-wide cap and 2-inch drain with molded 3/4-inch port and tethered cap; port fits a standard garden hose to quickly drain the tank
  • MADE IN THE USA WITH GLOBAL MATERIALS: designed and produced in the USA with US-based customer service and technical support; backed by Chapin’s 1-year limited warranty
  • CONVERSION CAPABILITY: tank can be converted to a spot sprayer (pump, spray wand and shut-off, hose, and additional parts not included)
Bestseller No. 5
Class A Customs | One (1) RV Fresh and Gray Water 30 Gallon Tank | T-3000
  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
  • WATER TANK MEASUREMENTS: 34.5” Longest Length (not including fittings) x 12” x 17.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
  • TANK BUILT-IN TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
  • Great extra water storage in RV, pop-up campereBay, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
Bestseller No. 6
Class A Customs | 20 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2000-BPK-PUMP
  • 20 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 32.5” Longest Length (not including fittings) x 11.75” x 11.75” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose
  • classAcustoms 12 VOLT Fresh Water Pump MODEL # 12V3 - FRESH WATER USE ONLY - OPEN FLOW 11.6LPM / 3.0GPM AMPS 4.0A MAX AMPS 8.0A SHUT OFF PRESSURE 45PSI/3.1 Bar ON-DEMAND PUMP only turns on when senses pressure changes in line 12 VOLT POWER ONLY 110/115/220 volt will damage the unit - READ INSTRUCTION BOOKLER BEFORE INSTALLATION
Bestseller No. 7
RecPro Fresh and Gray Water Holding Tank | Combo Pack | Concession/Food Truck Holding Tank (10 & 16 Gallon)
  • All tanks have been pressure tested
  • Made in America
  • Please be sure to clean tanks before use
Bestseller No. 8
Class A Customs | T-4000 | One (1) RV Fresh Water 40 Gallon Tank, Grey Water
  • 40 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
  • WATER TANK MEASUREMENTS: 39 1/2” Longest Length (not including fittings) x 13” x 18” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
  • Great extra water storage in RV, pop-up campereBay, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
Bestseller No. 9
ICON 12474 Fresh Water Tank with 3/8" FTP and 1-1/4" Filter WT2474-6 Gallon, 16" x 8" x 12"
  • Fresh water tank only
  • Rote-molded, one piece construction for ultimate durability
  • Includes three corner placement fittings in 3/8" or 1/2" and one 1-1/4" filler boss
  • Dimensions: 16" Length x 8" Width x 12" Height
  • Capacity: 6 Gallons
Bestseller No. 10
Class A Customs | T-2500 | One (1) RV Fresh Water 25 Gallon Tank, Grey Water
  • 25 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
  • WATER TANK MEASUREMENTS: 33 1/2" Longest Length (not including fittings) x 10" x 17" - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
  • Great extra water storage in RV, pop-up campereBay, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.

 

Last update on 2025-04-15 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...