“This site contains affiliate links for which OEMDTC may be compensated” |
March 3, 2022 NHTSA CAMPAIGN NUMBER: 22V121000
Damaged Valve Stem May Cause Loss of Tire Pressure
Damage to the valve stem extension may result in a loss of tire pressure of the inner wheel, increasing the risk of a crash.
NHTSA Campaign Number: 22V121
Manufacturer Jayco, Inc.
Components TIRES
Potential Number of Units Affected 1,055
Summary
Jayco, Inc. (Jayco
) is recalling certain 2019-2022 Seneca, Seneca Prestige, Entegra Accolade and Accolade XL motorhomes. The tire valve stem extension for the inner wheel may come into contact with the outer wheel rim opening and become damaged.
Remedy
Daimler Trucks North America, LLC will remove the inner valve stem extension and stabilizer, free of charge. Owner notification letters were mailed April 28, 2022. Owners may contact Jayco
customer service at 1-800-283-8267. Jayco
’s number for this recall is FL912 21V-921.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
January 2022
FL912AB
NHTSA #21V-921
Subject: FCCC Motorhome Valve Stem Stabilizers
Models Affected: Specific model years 2017-2023 FCCC MBC, MC, MT55, S2C, S2G, S2RV, XBR, XBS, XCL, XCM, XCR, and XCS chassis manufactured February 20, 2017, through November 18, 2021, and equipped with a valve stem extension and stabilizer configured with a specific tire valve stem and wheel combination.
Chronology :
1/24/2022 A retail owner contacted Jayco Customer Service inquiring about a notification of a recall they received from Daimler for recall 21V-921.
1/28/22 Jayco Compliance contacted Daimler about the recall and they sent a list of affected VINs to Jayco
.
1/31/2022 Warranty Incident Review Committee (WIRC) discussed this incident and elevated to the Corrective and Preventive Action Committee (CPAC).
2/2/2022 CPAC met to discuss this incident and elevated this incident to the Safety Steering Committee (SSC).
On 2/24/2022 SSC met and voted that a safety recall was appropriate for this incident.
2017-2023 Freightliner
Custom Chass FL912 Damaged Valve Stem May Cause Loss of Tire Pressure
FL912 Damaged Valve Stem May Cause Loss of Tire Pressure – 2017-2023 Freightliner Custom Chass
16 Affected Products
Vehicles
MAKE | MODEL | YEAR |
ENTEGRA | ACCOLADE | 2019-2022 |
ENTEGRA | ACCOLADE XL | 2019-2022 |
JAYCO![]() | SENECA | 2019-2022 |
JAYCO![]() | SENECA PRESTIGE | 2019-2022 |
8 Associated Documents
Recall 573 Report – 3/8/2022
RCLRPT-22V121-3992.PDF 215.5KB
Defect Notice 573 Report
RCLRPT-22V121-5786.PDF 215.133KB
Recall Acknowledgement
RCAK-22V121-3640.pdf 696.254KB
Recall 573 Report – 3/21/2022
RCLRPT-22V121-5976.PDF 215.556KB
Recall 573 Report – 4/14/2022
RCLRPT-22V121-4417.PDF 215.554KB
Remedy Instructions and TSB
RCRIT-22V121-3090.pdf 121.949KB
ISSUED Owner Notification Letter(Part 577)
RCONL-22V121-0188.pdf 169.97KB
Manufacturer Notices(to Dealers,etc)
RCMN-22V121-9005.pdf 167.135KB
Latest Recalls Documents
“This site contains affiliate links for which OEMDTC may be compensated” |
- 【Boost Tyre Life】- Experience increased tire lifespan, lowered fuel consumption,and improved driving safety with our valve stem extension.Designed for regular checking, these extensions allow for easier pressure check or air addition without needing to be removed. Enhance your tire’s performance and drive with confidence.
- 【Durability Upgraded】- Our tire valve extension represent durable wear-resistant engineering.Crafted from strong brass, these pieces are not easily deformed, broken,or rusted.Even if the spool is damaged, rest assured these extensions cause no pressure loss, ensuring value in durability and performance.
- 【Effortless Install】- This valve stem extenders set includes 4 pieces of 39mm brass tire valve extensions, designed for effortless installment.Simply screw onto your current tire stem without the need for additional dust covers.Made with chrome-plated brass, our extensions are waterproof and durable, making for an ideal replacement for your old valve cap extensions.
- 【Detailed Product Info】- We stand out from our competitors by providing detailed product images and accurate descriptions,allowing our customers to understand the product better,thus saving them both time and effort.We are also always available to assist our clients with any queries they may have about the product.
- 【Satisfaction Guarantee】- Once purchased, you will receive a securely packaged product.We offer a free replacement for any product that gets damaged during transport or shows any signs of wear and tear.We highly value our customers’satisfaction and ensure they have a seamless purchase experience.
- 【Screw-in Design】Our valve caps stem extension is a screw-in design, allowing you to check tire pressure or add air without removing it
- 【Durable Material】The cap stem extensions are made of brass, which is strong and durable, not easy to deform or break, wear-resistant, and not easy to rust.
- 【Practical Function】Extending the tire valve extenders can extend tire life, reduce fuel consumption, and improve driving safety, so you can drive with confidence
- 【Easy to Install】The valve stem extenders are easy to install and simply screws onto the existing tire stem, no additional dust cover is required.
- 【You Will Get】The set contains 4 pcs brass tire valve extension, which can effectively prevent tire leakage and are an ideal replacement for your old valve cap extensions.
- Packaged Include: 5Pieces Inflate Through High Pressure Valve Stem Caps,5Pieces Tire Stem Valve Caps with O Rubber Ring,5Pieces O Rubber Ring for replacement.Replaces any standard valve stem cap as well as V2B and DS-1
- Premium Material - Heavy duty design,more durable, more strong, are made of good quality solid brass, can effectively prevent rust and corrosion,which is durable and is not easy to break or deform,can still be used for a long time.
- ESAY TO INSTALL - All tire valve caps has stripes around the top dome shape, easier to grab and tighten, more convenient.Gauge and inflate valve extensions directly through the cap
- UNIVERSAL STEM TIRE VALVE CAPS:Commonly used for Commercial trucks, RV's, Trailers and Semi's but can used on anything with a valve stem.1.55" total effective length.
- Superior Safety – No leakage during use, hold the Pressure Well.Valve has two seals and is protected by a solid, all metal housing with a durable, high-temperature- resistant rubber o-ring inside. Safety feature causes seal to tighten to prevent air loss in case the valve fails.Maximum working pressure is 150PSI.
- 【3 KIND of DEGREE DESIGNES】: This set of valve extenders has 3 kind of angles, 45 degree, 90 degree and 135 degree, and they are all equipped with rubber seals, which is gonna ensure the inflatable airtight.These valve extension adapter makes checking and inflating your dual tires easy.Solid metal valve extenders make hard to reach valves accessible,Perfect for duallys, RVs and all hard to reach valves
- 【PREMIUM MATERIAL】Made of nickle plated brass with swivel base,more durable and used for many years as metallic luster as new.
- 【EASY INSTALL&SAFETY】Simple to install, no tools required, The built-in core allows inflation and deflation. Just screw on, the stem fitting rotates on the extension shaft allowing you to set at any position and locks to your desired position and seals when finger tight.
- 【WIDE USAGE 】This universal extension will fit all passenger cars, light and heavy trucks,motorcycles,Trailers,Scooter,RV and recreational vehicles with standard tire valves or other heavy dualies wheel vehicles, etc.
- 【PACKAGE INCLUDE】2 pieces of 45 degree extenders, 2 pieces of 90 degree extenders and 2 pieces of 135 degree extenders, enough for yours checking and inflating works.
- Package includes: 2 x 50mm Tire Valve Stem Air Inflation Extension Adaptor
- Quality Material: Made of reliable brass, they are sturdy and solid for durable use, not easy to wear or tear. The surface and edge are carefully polished, so they won't scratch your hands.
- Size: Length: 50mm/ 1.97"; Inner Thread Size: 7mm/0.28"
- Wide Application: This item can be widely applied on most cars, such as RVs, passenger cars, trucks, motorcycles, trailers, bicycles, and recreational vehicles with standard American tire valves. It helps a lot in a simple and smooth inflating process.
- Easy to install: 1. Crew the metal valve stem extender on your tire valve. 2. Connect the hose to your tire inlet through the valve stem extension to inflate the tire.
- These long flexible tire air valve extenders successfully solved a series of operations such as inability to pump or check air pressure due to insufficient space between the valve and the spokes, or the inconvenient position and angle of the valve. Due to the built-in valve core, it can allow inflation and deflation, which is convenient and quick.
- The threaded head on the valve extenders is screwed on the existing valve stem, and the included end cap replaces the existing valve stem cover. However, when you're removing the tire valve extension, more air escapes that you would like. No problem...just remember to over-inflate by a pound or two so when you remove, you can adjust a bit with your checker.
- The tire valve extension joint is made of brass, which has strong wear resistance. Equipped with rubber sealing ring and sealing cover, durable. The bottom of the extension piece rotates freely, which is easy to operate, convenient and efficient.
- These tire valve extensions are rubber hoses, flexible and durable, and strong plasticity. With rim clamps, you can work more efficiently, check the pressure and fill the air.
- These tire valve extensions suitable for most bicycles, motorcycles, strollers, trailers, RVs with standard American tire valves.
- 【Good Material】: Their robust construction, characterized by the use of high-quality copper and a nickle-plated finish, contributing to the longevity and performance of your vehicle's tire valves. The nickle plating not only adds a sleek and polished appearance but also serves as a protective layer, enhancing the extension's resistance to wear and corrosion.
- 【Efficient Protection】: This screw-on valve cap stem extension will increase tire life span, lower fuel consumption and increase driving safety. The valve stem cap extension is designed to prevents tire pressure loss and prevents dirt and moisture. Efficiently increase original tire valve screw's life-span.
- 【With Rubber Washer】: The rubber washers prevent the cap from loosening or slipping off due to mechanical vibrations, such as those encountered during vehicle operation. The rubber washers not only safeguard against cap detachment due to vibrations but also contribute to a reliable and airtight seal, thereby promoting optimal tire pressure and ensuring a safe and efficient driving experience.
- 【Easy Installation】: Simply screw onto current tire stem, no additional dust cap required. Moreover, the absence of separate valve caps makes it exceptionally convenient to check your tire pressure. With these extensions in place, you can easily access the valve stem, allowing you to monitor your tire pressure quickly and accurately. Save your time when checking tire pressure.
- 【Universal Fit】: Their standardized sizes of 19mm, 27mm, and 39mm ensure compatibility with various tire valve stems commonly found on these types of vehicles. Whether you own a compact car or a larger truck, these extension caps are engineered to fit a variety of tire valve stems, ensuring that you can easily secure and protect your valves.
- Package includes: there are a total of 4 pieces stainless steel valve stem extensions and 6 pieces brass valve stem extenders in the package, with different lengths and angles, give you multiple choices, thoughtful combination can meet your daily use demands, and adequate quantity allows you to share with your neighbors, colleagues and so on
- Quality material: the nut of the braided valve stem extender is made of reliable copper, and the braided flexible hose is made of stainless steel, sturdy and solid, will not break or deform easily, can serve you for a long time; And the tire valve stem extension is made of brass, with metallic luster, can keep bright after long term use, the surface and edge are polished carefully, do not worry they will scratch your hands while using, not easy to wear and tear
- Convenient to install: first screw the metal valve stem extender on your tire valve, then connect the hose to the tire inlet through the valve stem extension to inflate the tire, you can choose different angles according to your actual needs, the right angle bend allows easy access for the pump, the operation is simple, and convenient to use
- Wide application: this valve stem tool can be widely applied on most cars, such as RVs, passenger cars, trucks, motorcycles, trailers, bicycles and recreational vehicles with standard American tire valves, provides convenience for your life, and making your inflating process more simple and smooth
- Diverse lengths and angles: these flexible extensions feature 2 lengths, measuring approx. 7 inches and 12 inches,various sizes for you to choose ; And these tyre valve extension adaptors are designed with 3 different angles, which contain 45 degrees, 90 degrees and 135 degrees, practical and useful
- PREMIUM MATERIAL: Tire valve extensions are made of rubber and brass, which is wear-resistant and pressure-resistant, capable of withstanding high temperatures and pressures, ensuring long-term and reliability
- HOW TO USE: One end of the tire valve stem extension can be connected to the valve stem, while the other end can serve as a replacement for the original valve stem; the practical tire adapter is equipped with a rubber sealing ring and cap to avoid air leaks. The right-angle bend allows flexible and efficient access for air pumps or hoses
- EASY TO USE: The unique design and rubber brass material of the tire valve extension adaptors allow for optimal operational flexibility, easily reaching all angles and directions, conveniently extending the valve of the front or rear tire, ensuring that vehicle owners can inflate without obstacles even in confined spaces
- WIDE APPLICATION: The dual wheel valve stem extensions possess universal compatibility, suitable for a variety of models equipped with standard tire valves, including passenger cars, light and heavy-duty trucks, motorcycles, recreational vehicles and RV and portable air compressor
- PACKAGE CONTENTS: You will receive 2 pieces rubber tire valve adapters of 8.25 inches and 2 pieces 90 degree brass extension adapters
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Subject: FCCC Motorhome Valve Stem Stabilizers Models Affected: Specific model years 2017-2023 FCCC MBC, MC, MT55, S2C, S2G, S2RV, XBR, XBS, XCL, XCM, XCR, and XCS chassis manufactured February 20, 2017, through November 18, 2021, and equipped with a valve stem extension and stabilizer configured with a specific tire valve stem and wheel combination. General Information Daimler Trucks North America LLC (DTNA), on behalf of its wholly owned subsidiary, Freightliner Custom Chassis Corporation, has decided that a defect that relates to motor vehicle safety exists on the vehicles mentioned above. Certain chassis may have been built with the tire valve stem extension for the inner wheel contacting the outer wheel rim opening, potentially damaging the valve stem resulting in a loss of air pressure in the inner tire. A loss of air pressure in the inner tire on a motorhome with a single drive axle may overload the outer tire and increase the risk of a crash. The inner valve stem extension and stabilizer will be removed. There are approximately 18,500 vehicles involved in this campaign. Additional Repairs Dealers must complete all outstanding Recall and Field Service campaigns prior to the sale or delivery of a vehicle. A Dealer will be liable for any progressive damage that results from its failure to complete campaigns before sale or delivery of a vehicle. Owners may be liable for any progressive damage that results from failure to complete campaigns within a reasonable time after receiving notification. Work Instructions Please refer to the attached work instructions. Prior to performing the campaign, check the vehicle for a completion sticker (Form WAR260). Replacement Parts Replacement parts are now available and can be obtained by ordering the kit and/or part number(s) listed below from your facing Parts Distribution Center. If our records show your dealership has ordered any vehicle(s) involved in campaign number FL912, a list of the customers and vehicle identification numbers will be available on DTNAConnect. Please refer to this list when ordering parts for this recall. Table 1 – Replacement Parts for FL912 Campaign Number Kit Number Part Description Part Number Qty. per Kit FL912A 25-FL912-000 Part Part # X ea BLANK COMPLETION STICKER WAR260 1 ea Table 1 Daimler Trucks North America LLC Recall Campaign January 2022 FL912AB NHTSA #21V-921 Page 1 Removed Parts U.S. and Canadian Dealers, please follow Warranty Failed Parts Tracking shipping instructions for the disposition of all removed parts. Export distributors, please destroy removed parts unless otherwise advised. Labor Allowance Table 2 – Labor Allowance Campaign Number Procedure Time Allowed (hours) SRT Code Corrective Action FL912AB Removal of inner valve stem extension and stabilizer 0.1 996-R133A 12-Repair Recall/Campaign FL912AB Buff scratches on one wheel 0.3 996-R133B 12-Repair Recall/Campaign Table 2 IMPORTANT: When the Recall has been completed, locate the base completion label in the appropriate location on the vehicle, and attach the red completion sticker provided in the recall kit (Form WAR260). If the vehicle does not have a base completion label, clean a spot on the appropriate location of the vehicle and first attach the base completion label (Form WAR259). If a recall kit is not required or there is no completion sticker in the kit, write the recall number on a blank sticker and attach it to the base completion label. Claims for Credit You will be reimbursed for your parts, labor, and handling (landed cost for Export Distributors) by submitting your claim through the Warranty system within 30 days of completing this campaign. Please reference the following information in OWL: • Claim type is Recall Campaign. • In the Campaign field, enter the campaign number and appropriate condition code (FL912-A, or FL912- B). • In the Primary Failed Part Number field, enter 25-FL912-000. • No replacement parts are required. • In the Labor field, first enter the appropriate SRT from the Labor Allowance Table. Administrative time will be included automatically as SRT 939-6010A for 0.4 hours for RVs or 0.3 hours for all other vehicles. • The VMRS Component Code is F99-999-005 and the Cause Code is A1 – Campaign. • U.S. and Canada — Reimbursement for Prior Repairs. When a customer asks about reimbursement, please do the following: • Accept the documentation of the previous repair. • Make a brief check of the customer’s paperwork to see if the repair may be eligible for reimbursement. (See the “Copy of Owner Letter” section of this bulletin for reimbursement guidelines.) • Submit an OWL Recall Pre-Approval Request for a decision. • Include the approved amount on your claim in the Other Charges section. • Attach the documentation to the pre-approval request. • If approved, submit a based on claim for the pre-approval. • Reimburse the customer the appropriate amount. IMPORTANT: OWL must be viewed prior to performing the recall to ensure the vehicle is involved and the campaign has not been previously completed. Also, check for a completion sticker prior to beginning work. Daimler Trucks North America LLC Recall Campaign January 2022 FL912AB NHTSA #21V-921 Page 2 U.S. and Canadian dealers, contact the Warranty Campaigns Department via Web inquiry at DTNAConnect.com/WSC, if you have any questions or need additional information. Export distributors, submit a Web inquiry or contact your International Service Manager. U.S. and Canadian Dealers: To return excess kit inventory related to this campaign, U.S. dealers must submit a Parts Authorization Return (PAR) to the Memphis PDC. Canadian dealers must submit a PAR to their facing PDC. All kits must be in resalable condition. PAR requests must include the original purchase invoice number. Export Distributors: Excess inventory is not returnable. The letter notifying U.S. and Canadian vehicle owners is included for your reference. Please note that the National Traffic and Motor Vehicle Safety Act, as amended (Title 49, United States Code, Chapter 301), requires the owner’s vehicle(s) be corrected within a reasonable time after parts are available to you. The Act states that failure to repair a vehicle within 60 days after tender for repair shall be prima facie evidence of an unreasonable time. However, circumstances of a particular situation may reduce the 60 day period. Failure to repair a vehicle within a reasonable time can result in either the obligation to (a) replace the vehicle with an identical or reasonably equivalent vehicle, without charge, or (b) refund the purchase price in full, less a reasonable allowance for depreciation. The Act further prohibits dealers from selling a vehicle unless all outstanding recalls are performed. Any lessor is required to send a copy of the recall notification to the lessee within 10 days. Any subsequent stage manufacturer is required to forward this notice to its distributors and retail outlets within five working days. Daimler Trucks North America LLC Recall Campaign January 2022 FL912AB NHTSA #21V-921 Page 3 Copy of Notice to Owners Subject: FCCC Motorhome Valve StemStabilizers This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. This is to inform you that your vehicle may contain a defect that could affect the safety of a person. Daimler Trucks North America LLC (DTNA), on behalf of its wholly owned subsidiary, Freightliner Custom Chassis Corporation, has decided that a defect which relates to motor vehicle safety exists on specific Model Years 2017 – 2023 FCCC MBC, MC, MT55, S2C, S2G, S2RV, XBR, XBS, XCL, XCM, XCR, and XCS chassis manufactured February 20, 2017, through November 18, 2021, and equipped with a valve stem extension and stabilizer configured with a specific tire valve stem and wheel combination. Certain chassis may have been built with the tire valve stem extension for the inner wheel contacting the outer wheel rim opening, potentially damaging the valve stem resulting in a loss of air pressure in the inner tire. A loss of air pressure in the inner tire on a motorhome with a single drive axle may overload the outer tire and increase the risk of a crash. The inner valve stem extension and stabilizer will be removed. Repairs will be performed by Daimler Trucks North America authorized service facilities. Please contact an authorized Daimler Trucks North America dealer to arrange to have the Recall performed and to ensure that parts are available at the dealership. The Recall will take approximately one hour and will be performed at no charge to you. To locate an authorized dealer, search online at Daimler-TrucksNorthAmerica.com/contact-us/. Scroll down to “Locate a Dealer,” and select the appropriate brand. You may also confirm your vehicle’s involvement in this recall at this URL: https:// dtna-dlrinfo.prd.freightliner.com:48518/VinLookup/vin-module/getVinLookupPage. You may be liable for any progressive damage that results from your failure to complete the Recall within a reasonable time after receiving notification. If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department in the postage-paid envelope with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days. If you have paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement. Please see the reverse side of this notice for details. If you have questions about this Recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday, e-mail address DTNA.Warranty.Campaigns@Daimler.com. For the Notice to U.S. Customers: If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or to http://www.safercar.gov. For the Notice to Canadian Customers: If you wish to submit a complaint about this recall, you can contact Transport Canada road safety, 80 rue Noel, Gatineau, Quebec J8Z 0A1 or call (800) 333-0510. We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety. WARRANTY CAMPAIGNS DEPARTMENT Enclosure Daimler Trucks North America LLC Recall Campaign January 2022 FL912AB NHTSA #21V-921 Page 4 Reimbursement to Customers for Repairs Performed Prior to Recall If you have already paid to have this recall condition corrected you may be eligible to receive reimbursement. Requests for reimbursement may include parts and labor. Reimbursement may be limited to the amount the repair would have cost if completed by an authorized Daimler Trucks North America LLC dealer. The following documentation must be presented to your dealer for consideration for reimbursement. Please provide original or clear copies of all receipts, invoices, and repair orders that show: • The name and address of the person who paid for the repair • The Vehicle Identification Number (VIN) of the vehicle that was repaired • What problem occurred, what repair was done, when the repair was done • Who repaired the vehicle • The total cost of the repair expense that is being claimed • Proof of payment for the repair (such as the front and back of a cancelled check or a credit card receipt) Reimbursement will be made by check from your Daimler Trucks North America LLC dealer. Please speak with your Daimler Trucks North America LLC authorized dealer concerning this matter. Daimler Trucks North America LLC Recall Campaign January 2022 FL912AB NHTSA #21V-921 Page 5 Work Instructions Subject:FCCC Motorhome Valve StemStabilizers Models Affected: Specific model years 2017-2023 FCCC MBC, MC, MT55, S2C, S2G, S2RV, XBR, XBS, XCL, XCM, XCR, and XCS chassis manufactured February 20, 2017, through November 18, 2021, and equipped with a valve stem extension and stabilizer configured with a specific tire valve stem and wheel combination. Inner Wheel Valve Stem Extention and Stabilizer Removal and Valve Stem Cap Replacement 1. Inspect the base label (Form WAR259) for a campaign completion sticker for FL912 (Form WAR261). If a sticker is present for FL912, no work is needed. If there is no sticker, proceed with the steps below. 2. Remove and discard the rear inner wheel valve stem extensions. See Fig. 1. 3. Remove and discard the rear inner wheel valve stem extension stabilizers. See Fig. 1. 4. Install the valve stem cap MYI 21 534 on the rear inner wheel valve stems. See Fig. 2. 12/10/2021 f400447 1 2 1. Stabilizer 2. Inner Wheel Valve Stem Extension Fig. 1, Inner Wheel Valve Stem Extension and Stabilizer Daimler Trucks North America LLC Recall Campaign January 2022 FL912AB NHTSA #21V-921 Page 6 5. Clean a spot on the base label (Form WAR259) and attach a campaign completion sticker for FL912 (Form WAR261) indicating this work has been completed. 01/07/2022 f400449 Fig. 2, Completed Work Daimler Trucks North America LLC Recall Campaign January 2022 FL912AB NHTSA #21V-921 Page 7
**************************************************************************************************************
IMPORTANT SAFETY RECALL This Notice Applies to Your Recreational Vehicle «vin» Name Address City, St. Zip Dear Valued Customer: This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Daimler Trucks North America LLC (DTNA), on behalf of its wholly owned subsidiary, Freightliner Custom Chassis Corporation, and Jayco motorized division have decided that a defect, which relates to motor vehicle safety, exists on certain model year 2018-2023 Entegra Accolade, Accolade XL, Jayco Seneca, Seneca Prestige Class C motorhomes built with certain Freightliner model Years 2017 – 2023 FCCC MBC, MC, MT55, S2C, S2G, S2RV, XBR, XBS, XCL, XCM, XCR, and XCS chassis manufactured February 20, 2017, through November 18, 2021, and equipped with a valve stem extension and stabilizer configured with a specific tire valve stem and wheel combination. Certain chassis may have been built with the tire valve stem extension for the inner wheel contacting the outer wheel rim opening, potentially damaging the valve stem resulting in a loss of air pressure in the inner tire. A loss of air pressure in the inner tire on a motorhome with a single drive axle may overload the outer tire and increase the risk of a crash. Repairs will be performed by Daimler Trucks North America authorized service facilities. The inner valve stem extension and stabilizer will be removed. The Recall will take approximately one hour and will be performed at no charge to you. Please contact an authorized Daimler Trucks North America dealer to arrange to have the Recall performed and to ensure that parts are available at the dealership. To locate an authorized dealer, search online at Daimler-TrucksNorthAmerica.com/contact-us/. Scroll down to “Locate a Dealer,” and select the appropriate brand. You may also confirm your vehicle’s involvement in this recall at this URL: https:// dtna-dlrinfo.prd.freightliner.com:48518/VinLookup/vin-module/getVinLookupPage. If you have paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement. Requests for reimbursement may include parts and labor. Reimbursement may be limited to the amount the repair would have cost if completed by an authorized Daimler Trucks North America LLC dealer. The following documentation must be presented to your dealer for consideration for reimbursement. Please provide original or clear copies of all receipts, invoices, and repair orders that show: 1. The name and address of the person who paid for the repair 2. The Vehicle Identification Number (VIN) of the repaired vehicle 3. What problem occurred, what repair was done, and the date of the repair 4. Who repaired the vehicle 5. The total cost of the claimed repair expense 6. Proof of payment for the repair (such as the front and back of a cancelled check or a credit card receipt) Reimbursement will be made by check from your Daimler Trucks North America LLC dealer. Please speak with your authorized Daimler Trucks North America LLC dealer concerning this matter. If you do not own the vehicle that corresponds to the identification number(s), which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you have questions about this Recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday, e-mail address DTNA.Warranty.Campaigns@Daimler.com. If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or to http://www.safercar.gov. We certainly regret this inconvenience; however, your safety is our most important priority. Sincerely, Compliance Management Jayco Motorized Division Safety Recall: April 2022 Jayco Inc. 22V-121 Daimler Trucks 21V-921 (FL912) June 2020 Reason for this recall What we need you to do Recall Remedy
**************************************************************************************************************
IMPORTANT SAFETY RECALL This Notice Applies to Your Recreational Vehicle Name Address City, St. Zip Dear Valued Dealer: This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Daimler Trucks North America LLC (DTNA), on behalf of its wholly owned subsidiary, Freightliner Custom Chassis Corporation, and Jayco motorized division have decided that a defect, which relates to motor vehicle safety, exists on certain model year 2018-2023 Entegra Accolade, Accolade XL, Jayco Seneca, Seneca Prestige Class C motorhomes built with certain Freightliner model Years 2017 – 2023 FCCC MBC, MC, MT55, S2C, S2G, S2RV, XBR, XBS, XCL, XCM, XCR, and XCS chassis manufactured February 20, 2017, through November 18, 2021, and equipped with a valve stem extension and stabilizer configured with a specific tire valve stem and wheel combination. Certain chassis may have been built with the tire valve stem extension for the inner wheel contacting the outer wheel rim opening, potentially damaging the valve stem resulting in a loss of air pressure in the inner tire. A loss of air pressure in the inner tire on a motorhome with a single drive axle may overload the outer tire and increase the risk of a crash. Repairs will be performed by Daimler Trucks North America authorized service facilities. The inner valve stem extension and stabilizer will be removed. The Recall will take approximately one hour and will be performed at no charge to you. Our records show the following unit is affected by this recall and is part of the current inventory at your dealership. VIN Please contact an authorized Daimler Trucks North America dealer to arrange to have the Recall performed and to ensure that parts are available at the dealership. To locate an authorized dealer, search online at Daimler-TrucksNorthAmerica.com/contact-us/. Scroll down to “Locate a Dealer,” and select the appropriate brand. You may also confirm your vehicle’s involvement in this recall at this URL: https://dtna-dlrinfo.prd.freightliner.com:48518/VinLookup/vin-module/getVinLookupPage. Federal law requires that all affected units in your inventory be repaired prior to delivery to a retail owner. If you sold an affected unit recently, please contact the owner immediately to advise the owner of the recall. In addition, please register the unit through Jayco Partners. A vehicle lessor receiving this notice must notify the lessee by first class mail within ten (10) days from receipt of this owner notification letter. Information regarding this recall is available in “Case Recall Attachments” in Jayco Partners. If you have questions about this recall please contact Warranty Campaigns Department at (800) 547-0712 or email DTNA.Warranty.Campaigns@Daimler.com you may also contact Jayco Inc. Customer Service Department at 800-283-8267. We certainly regret this inconvenience; however, our Customers’ safety is our most important priority. Sincerely, Compliance Management Jayco Motorized Division Safety Recall: April 2022 Jayco Inc. 22V-121 Daimler Trucks 21V-921 (FL912) Reason for this recall What we need you to do Recall Remedy
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-121 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Jayco, Inc. Submission Date : MAR 21, 2022 NHTSA Recall No. : 22V-121 Manufacturer Recall No. : FL912 21V-921 Manufacturer Information : Manufacturer Name : Jayco, Inc. Address : 903 South Main Street PO Box 460 Middlebury IN 46540 Company phone : 800-283-8267 Population : Number of potentially involved : 1,055 Estimated percentage with defect : 1 % Vehicle Information : Vehicle 1 : 2019-2022 JAYCO CLASS C MOTORHOME Seneca, Seneca Prestige, Accolade, Accolade XL Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : The recall population was determined by cross referencing the VINs provided by Daimler to Jayco’s production records. Production Dates : APR 16, 2019 – MAR 03, 2022 VIN Range 1 : Begin : 4UZADVFC0KCLS6188 End : 4UZADVFCXNCNS9383 ✔ Not sequential Description of Defect : Description of the Defect : Daimler Trucks North America, LLC (Daimler) reported to Jayco that certain incomplete vehicle chassis may have been built with the tire valve stem extension for the inner wheel contacting the outer wheel rim opening, potentially damaging the valve stem resulting in a loss of air pressure in the inner tire. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : A loss of air pressure in the inner tire may overload the outer tire and increase the risk of a crash. Description of the Cause : Daimler did not report the cause. Identification of Any Warning that can Occur : Operators may identify an audible rattling noise from the stem extension rubbing against the wheel opening while driving. Visual inspection during inspection or during maintenance may reveal stabilizer is dislocated, damage to the stem extension, or the rim, and low tire pressure of the inner tire. Part 573 Safety Recall Report 22V-121 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Involved Components : Component Name 1 : Outer Wheel Component Description : Outer Aluminum wheel Component Part Number : ACC40620 Component Name 2 : Inner Wheel Component Description : Inner steel wheel Component Part Number : ACC50487 or ACC51487 Component Name 3 : Extension Stabilizer Component Description : Rubber Valve Stem Extension Stabilizer Component Part Number : 13-10232-000 Component Name 4 : Valve Stem Extension Component Description : Inner Valve Stem Extension Component Part Number : 13-10026-000 Component Name 5 : Valve Stem Component Description : Inner Wheel Valve Stem Component Part Number : 13-10303-000 or 13-10027-000 Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Part 573 Safety Recall Report 22V-121 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Chronology : 1/24/2022 A retail owner contacted Jayco Customer Service inquiring about a notification of a recall they received from Daimler for recall 21V-921. 1/28/22 Jayco Compliance contacted Daimler about the recall and they sent a list of affected VINs to Jayco. 1/31/2022 Warranty Incident Review Committee (WIRC) discussed this incident and elevated to the Corrective and Preventive Action Committee (CPAC). 2/2/2022 CPAC met to discuss this incident and elevated this incident to the Safety Steering Committee (SSC). On 2/24/2022 SSC met and voted that a safety recall was appropriate for this incident. Description of Remedy : Description of Remedy Program : The inner valve stem extension and stabilizer will be removed. Repairs will be performed by Daimler Trucks North America authorized service facilities. Repairs made prior to the recall will be reimbursed in accordance with our Recall Reimbursement Plan on file with NHTSA. Daimler trucks will be filing the completion rates with NHTSA for this recall. Daimler recall 21V-921. How Remedy Component Differs from Recalled Component : This was not reported by Daimler. Identify How/When Recall Condition was Corrected in Production : This was not reported by Daimler. Recall Schedule : Description of Recall Schedule : Jayco Inc. will send owner notifications to its dealers and affected retail owners before the 60 day deadline. Planned Dealer Notification Date : MAY 02, 2022 – MAY 02, 2022 Planned Owner Notification Date : MAY 02, 2022 – MAY 02, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-121 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Jayco, Inc. Submission Date : MAR 03, 2022 NHTSA Recall No. : 22V-121 Manufacturer Recall No. : FL912 21V-921 Manufacturer Information : Manufacturer Name : Jayco, Inc. Address : 903 South Main Street PO Box 460 Middlebury IN 46540 Company phone : 800-283-8267 Population : Number of potentially involved : 1,055 Estimated percentage with defect : 1 % Vehicle Information : Vehicle 1 : 2019-2022 JAYCO CLASS C MOTORHOME Seneca, Seneca Prestige, Accolade, Accolade XL Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : The recall population was determined by cross referencing the VINs provided by Daimler to Jayco’s production records. Production Dates : APR 16, 2019 – MAR 03, 2022 VIN Range 1 : Begin : 4UZADVFC0KCLS6188 End : 4UZADVFCXNCNS9383 ✔ Not sequential Description of Defect : Description of the Defect : Daimler Trucks North America, LLC (Daimler) reported to Jayco that certain incomplete vehicle chassis may have been built with the tire valve stem extension for the inner wheel contacting the outer wheel rim opening, potentially damaging the valve stem resulting in a loss of air pressure in the inner tire. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : A loss of air pressure in the inner tire may overload the outer tire and increase the risk of a crash. Description of the Cause : Daimler did not report the cause. Identification of Any Warning that can Occur : Operators may identify an audible rattling noise from the stem extension rubbing against the wheel opening while driving. Visual inspection during inspection or during maintenance may reveal stabilizer is dislocated, damage to the stem extension, or the rim, and low tire pressure of the inner tire. Part 573 Safety Recall Report 22V-121 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Involved Components : Component Name 1 : NR Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : 1/24/2022 A retail owner contacted Jayco Customer Service inquiring about a notification of a recall they received from Daimler for recall 21V-921. 1/28/22 Jayco Compliance contacted Daimler about the recall and they sent a list of affected VINs to Jayco. 1/31/2022 Warranty Incident Review Committee (WIRC) discussed this incident and elevated to the Corrective and Preventive Action Committee (CPAC). 2/2/2022 CPAC met to discuss this incident and elevated this incident to the Safety Steering Committee (SSC). On 2/24/2022 SSC met and voted that a safety recall was appropriate for this incident. Description of Remedy : Description of Remedy Program : The inner valve stem extension and stabilizer will be removed. Repairs will be performed by Daimler Trucks North America authorized service facilities. Repairs made prior to the recall will be reimbursed in accordance with our Recall Reimbursement Plan on file with NHTSA. Daimler trucks will be filing the completion rates with NHTSA for this recall. Daimler recall 21V-921. How Remedy Component Differs from Recalled Component : This was not reported by Daimler. Identify How/When Recall Condition was Corrected in Production : This was not reported by Daimler. Part 573 Safety Recall Report 22V-121 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Recall Schedule : Description of Recall Schedule : NR Planned Dealer Notification Date : MAY 02, 2022 – MAY 02, 2022 Planned Owner Notification Date : MAY 02, 2022 – MAY 02, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-121 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Jayco, Inc. Submission Date : APR 14, 2022 NHTSA Recall No. : 22V-121 Manufacturer Recall No. : FL912 21V-921 Manufacturer Information : Manufacturer Name : Jayco, Inc. Address : 903 South Main Street PO Box 460 Middlebury IN 46540 Company phone : 800-283-8267 Population : Number of potentially involved : 2,643 Estimated percentage with defect : 1 % Vehicle Information : Vehicle 1 : 2018-2023 JAYCO CLASS C MOTORHOME Seneca, Seneca Prestige, Accolade, Accolade XL Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : The recall population was determined by cross referencing the VINs provided by Daimler to Jayco’s production records. Production Dates : AUG 11, 2017 – APR 11, 2022 VIN Range 1 : Begin : 4UZADVFC0JCJR6086 End : 4UZADVFCXNCNS9383 ✔ Not sequential Description of Defect : Description of the Defect : Daimler Trucks North America, LLC (Daimler) reported to Jayco that certain incomplete vehicle chassis may have been built with the tire valve stem extension for the inner wheel contacting the outer wheel rim opening, potentially damaging the valve stem resulting in a loss of air pressure in the inner tire. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : A loss of air pressure in the inner tire may overload the outer tire and increase the risk of a crash. Description of the Cause : Daimler did not report the cause. Identification of Any Warning that can Occur : Operators may identify an audible rattling noise from the stem extension rubbing against the wheel opening while driving. Visual inspection during inspection or during maintenance may reveal stabilizer is dislocated, damage to the stem extension, or the rim, and low tire pressure of the inner tire. Part 573 Safety Recall Report 22V-121 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Involved Components : Component Name 1 : Outer Wheel Component Description : Outer Aluminum wheel Component Part Number : ACC40620 Component Name 2 : Inner Wheel Component Description : Inner steel wheel Component Part Number : ACC50487 or ACC51487 Component Name 3 : Extension Stabilizer Component Description : Rubber Valve Stem Extension Stabilizer Component Part Number : 13-10232-000 Component Name 4 : Valve Stem Extension Component Description : Inner Valve Stem Extension Component Part Number : 13-10026-000 Component Name 5 : Valve Stem Component Description : Inner Wheel Valve Stem Component Part Number : 13-10303-000 or 13-10027-000 Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Part 573 Safety Recall Report 22V-121 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Chronology : 1/24/2022 A retail owner contacted Jayco Customer Service inquiring about a notification of a recall they received from Daimler for recall 21V-921. 1/28/22 Jayco Compliance contacted Daimler about the recall and they sent a list of affected VINs to Jayco. 1/31/2022 Warranty Incident Review Committee (WIRC) discussed this incident and elevated to the Corrective and Preventive Action Committee (CPAC). 2/2/2022 CPAC met to discuss this incident and elevated this incident to the Safety Steering Committee (SSC). On 2/24/2022 SSC met and voted that a safety recall was appropriate for this incident. Description of Remedy : Description of Remedy Program : The inner valve stem extension and stabilizer will be removed. Repairs will be performed by Daimler Trucks North America authorized service facilities. Repairs made prior to the recall will be reimbursed in accordance with our Recall Reimbursement Plan on file with NHTSA. Daimler trucks will be filing the completion rates with NHTSA for this recall. Daimler recall 21V-921. How Remedy Component Differs from Recalled Component : This was not reported by Daimler. Identify How/When Recall Condition was Corrected in Production : This was not reported by Daimler. Recall Schedule : Description of Recall Schedule : Jayco Inc. will send owner notifications to its dealers and affected retail owners before the 60 day deadline. Planned Dealer Notification Date : MAY 02, 2022 – MAY 02, 2022 Planned Owner Notification Date : MAY 02, 2022 – MAY 02, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-121 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Jayco, Inc. Submission Date : MAR 08, 2022 NHTSA Recall No. : 22V-121 Manufacturer Recall No. : FL912 21V-921 Manufacturer Information : Manufacturer Name : Jayco, Inc. Address : 903 South Main Street PO Box 460 Middlebury IN 46540 Company phone : 800-283-8267 Population : Number of potentially involved : 1,055 Estimated percentage with defect : 1 % Vehicle Information : Vehicle 1 : 2019-2022 JAYCO CLASS C MOTORHOME Seneca, Seneca Prestige, Accolade, Accolade XL Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : The recall population was determined by cross referencing the VINs provided by Daimler to Jayco’s production records. Production Dates : APR 16, 2019 – MAR 03, 2022 VIN Range 1 : Begin : 4UZADVFC0KCLS6188 End : 4UZADVFCXNCNS9383 ✔ Not sequential Description of Defect : Description of the Defect : Daimler Trucks North America, LLC (Daimler) reported to Jayco that certain incomplete vehicle chassis may have been built with the tire valve stem extension for the inner wheel contacting the outer wheel rim opening, potentially damaging the valve stem resulting in a loss of air pressure in the inner tire. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : A loss of air pressure in the inner tire may overload the outer tire and increase the risk of a crash. Description of the Cause : Daimler did not report the cause. Identification of Any Warning that can Occur : Operators may identify an audible rattling noise from the stem extension rubbing against the wheel opening while driving. Visual inspection during inspection or during maintenance may reveal stabilizer is dislocated, damage to the stem extension, or the rim, and low tire pressure of the inner tire. Part 573 Safety Recall Report 22V-121 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Involved Components : Component Name 1 : Outer Wheel Component Description : Outer Aluminum wheel Component Part Number : ACC40620 Component Name 2 : Inner Wheel Component Description : Inner steel wheel Component Part Number : ACC50487 or ACC51487 Component Name 3 : Extension Stabilizer Component Description : Rubber Valve Stem Extension Stabilizer Component Part Number : 13-10232-000 Component Name 4 : Valve Stem Extension Component Description : Inner Valve Stem Extension Component Part Number : 13-10026-000 Component Name 5 : Valve Stem Component Description : Inner Wheel Valve Stem Component Part Number : 13-10303-000 or 13-10027-000 Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Part 573 Safety Recall Report 22V-121 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Chronology : 1/24/2022 A retail owner contacted Jayco Customer Service inquiring about a notification of a recall they received from Daimler for recall 21V-921. 1/28/22 Jayco Compliance contacted Daimler about the recall and they sent a list of affected VINs to Jayco. 1/31/2022 Warranty Incident Review Committee (WIRC) discussed this incident and elevated to the Corrective and Preventive Action Committee (CPAC). 2/2/2022 CPAC met to discuss this incident and elevated this incident to the Safety Steering Committee (SSC). On 2/24/2022 SSC met and voted that a safety recall was appropriate for this incident. Description of Remedy : Description of Remedy Program : The inner valve stem extension and stabilizer will be removed. Repairs will be performed by Daimler Trucks North America authorized service facilities. Repairs made prior to the recall will be reimbursed in accordance with our Recall Reimbursement Plan on file with NHTSA. Daimler trucks will be filing the completion rates with NHTSA for this recall. Daimler recall 21V-921. How Remedy Component Differs from Recalled Component : This was not reported by Daimler. Identify How/When Recall Condition was Corrected in Production : This was not reported by Daimler. Recall Schedule : Description of Recall Schedule : NR Planned Dealer Notification Date : MAY 02, 2022 – MAY 02, 2022 Planned Owner Notification Date : MAY 02, 2022 – MAY 02, 2022 * NR – Not Reported
**************************************************************************************************************
SEOCONTENT-END