| โThis site contains affiliate links for which OEMDTC may be compensatedโ |
April 20, 2022 NHTSA CAMPAIGN NUMBER: 22V268000
Electrical Relay May Overheat and Cause Fire
An overheated electrical relay increases the risk of a fire.
NHTSA Campaign Number: 22V268
Manufacturer Kibbi, LLC
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 148
Summary
Kibbi, LLC (Kibbi) is recalling certain 2021 Renegade RV Vienna and Villagio motorhomes equipped with Dayton/Snyder electrical relays. A stranded wire used in the connector may cause the relay to overheat.
Remedy
Dealers will remove the electrical relay and reconnect wiring as necessary. Dealers will also add a warning label by the Firefly touch screen that states, “Don’t use Range, Microwave or Air Conditioning unit unless the coach is powered by shore or Generator.” All repairs will be performed free of charge. Owner notification letters are expected to be mailed on April 29, 2022. Owners may contact Kibbi’s customer service at 1-574-966-0196.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Renegade RV has decided that a defect, which relates to motor vehicle safety, exists in certain 2021 Vienna/Villagio vehicles. Upon receipt of this notice contact your local service center to schedule an appointment to have the remedy performed. Renegade RV will execute this remedy (0.5 labor hours allotted for relay only). The service center is to order the part kit (# 4520068) that Renegade RV will supply at NO CHARGE and complete the repair for free.
What is the issue: Possibility for a fire at the 110 VAC load center due to heat from the Dayton/Snyder Electric relay.
What is the safety risk: The possibility of the 110 VAC load center and or the DAYTON/Snyder Electric relay distorting, melting and up to causing a fire.
Identify any warning which can precede or occur: Possibility of smell and/or smoke.
What is the cause: Stranded wire used in a compression style connector causing heat within the relay.
What is the Remedy: At no cost to the customer, Renegade will remove jumper wire from Dayton/Snyder Electric relay to main breaker. Move S.J. wire from Dayton/Snyder Electric relay to main breaker. Remove the Dayton/Snyder Electric relay, remove 12 VDC trigger wires from the 110 VAC load center with the relay, cap off 12 VDC wires, using bell connectors, and secure behind load center with zip tie. Add decal by Firefly touch screen indicating โDonโt use Range, Microwave or Air Conditioning unit unless coach is powered by shore or Generatorโ The Dayton/Snyder Electric relay does not allow for the range, microwave, or A/C to operate off the inverter by sensing shore/generator power through the transfer switch.
Removal of the relay will allow the range, microwave, and A/C to operate on the inverter. Customer to be made aware of load management with this change.
If you have incurred expense to remedy this issue prior to the date of this notice, you may have the opportunity to obtain reimbursement for that expense. For details, contact us at the number or email address provided.
warranty@renegaderv.com
Jaxon Prill-574-966-0166
John Wood-574-966-0193
If you believe that Renegade RV has failed, or is unable to remedy this defect without charge and within a reasonable amount of time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, S.E. Washington DC 20590; or call the toll free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safecar.gov.
Renegade RV is committed to providing the best products that enable our customers to enjoy a mobile lifestyle and we apologize for any inconvenience this may cause.
Chronology :
9/14/2021- Retail customer K34-1607 reached out for faulty relay.
9/15/2021-Relay ordered from vendor
9/21/2021-Relay received, sent to dealer for repair.0-deaths 0-injuries
11/8/2021- Retail customer K14-0477 reached out for heat related damaged to relay
11/9/2021- Research relay, order new 110VAC load center without relay
11/22/2021- Received 110 VAC load center, sent to dealer for repair 0Deaths 0-injuries
1/6/2022- Dealer reached out for heat related damage to relay for K14-0503
1/7/2022- New 110 VAC load center, without relay, sent out to dealer for repair 0-Deaths 0-injuries
3/23/2022-Dealer reached out for heat related damage to relay for K34-1494
3/23/2022- New 110 VAC load center, without relay, sent to dealer for repair 0-deaths 0-injuries
2 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| RENEGADE | VIENNA | 2021 |
| RENEGADE | VILLAGIO | 2021 |
9 Associated Documents
Recall Acknowledgement
Loading...
Reload document 
Open in new tab
Defect Notice 573 Report
RCLRPT-22V268-9068.PDF 213.574KB
Loading...
Recall 573 Report- 05/02/2022
RCLRPT-22V268-7661.PDF 216.1KB
Loading...
Recall 573 Report- 06/02/2022
RCLRPT-22V268-3039.PDF 216.084KB
Loading...
Recall Quarterly Report #1, 2022-2
RCLQRT-22V268-1660.PDF 211.127KB
Loading...
Recall Quarterly Report #2, 2022-3
RCLQRT-22V268-9342.PDF 211.222KB
Loading...
Recall Quarterly Report #3, 2022-4
RCLQRT-22V268-1772.PDF 211.312KB
Loading...
Owner Notification Letter(Part 577)
RCONL-22V268-2688.pdf 295.335KB
Loading...
Recall Quarterly Report #4, 2023-1
RCLQRT-22V268-3456.PDF 211.412KB
Loading...
Latest Recalls Documents
- Brand new heavy duty SPST(Single Pole Single Throw) relays with color-labeled wires.
- Minimum operating voltage 8V, corresponding minimum operating current is 100mA; Standard operating voltage 12V, corresponding standard operating current is 150mA.
- Small size/Low power consumption/High contact voltage/ High sensitivity.
- Contact Material: Ag Alloy / Contact Resistance: โค 100Mฮฉ.
- Life Expectancy Electrical: 100,000 Operation, Life Expectancy Mechanical: 10,000,000 Operation.
- Never go beyond its capabilities. Try to stay 10 to 15% below what the rate is for
- 12-volt 5-prong relay. Excellent water-repellent and dustproof ability, but not using it in water
- Be careful when inserting the relay into the socket. If you force it, you will bend the female connectors
- Primary leads use 12 a.w.g tinned copper wire. Coil leads use 16 a.w.g
- Nominal Coil Voltage: 12 V DC; Coil Power: 1.8 W; Coil Resistance: 80 ฮฉ; Must Operate Voltage: 6~8 V DC; Must Release Voltage: 0.6~3.6 V DC; Maximum Applied Voltage: 15.6 V DC
- High switching capability: Normally open 40A/14V DC and normally close 30A/14V DC. Suitable for Nilight LED light bar wiring harness kit
- Premium quality: Durable relay and harness socket with 5 wires; Made by high-grade materials to ensure superior quality and long lifespan
- Male-female slot design: Unique male-female slot design, easy to connect the relay with harness socket, clean and neat after installation
- Easy wiring: The relay sockets come with different colors for loads/accessories, simple and convenient wiring
- Package include: 5 x relay and 5 x relay socket with wires.Fit type: Universal fit
- 12 V DC automotive waterproof relays (max 14 V). Note: 12 V and 14 V are coil voltages, they are not the voltage that triggers the switch
- Premium quality: durable relay and harness socket with 5 wires; made from high-grade materials to ensure superior quality and long lifespan
- Pre-wired Harness: Heavy duty 12/16 AWG wiring harness. Black - 16AWG Pin85, White - 16AWG Pin86, Red - 12AWG Pin30 Yellow - 12AWG Pin87a, and Blue - 12AWG Pin87
- Enhanced Waterproof - The 5-Pin relays are tightly sealed with strong cap and seal ring, excellent performance of waterproof, dust proof and moisture proof, works well in any weather conditions
- Package includes: 5 pack Waterproof Relay and Harness. 1x User manual
- PA66 Material: This 5Pin relay shell is made of PA66 material, with stable insulation, high quality flame retardant casing. The structure is compact and durable, not easy to break or deform, and helps you adjust and transform circuits stably.
- Wide Application: The 5-pin relay suitable for automotive equipment equipped with 12V DC power supply, such as car audio systems, security systems, compressors. The relay box can be a nice replacement for 582195, 582472, 582473, 584416, 586147 and 586224, offering you a pleasant using experience.
- Reliable Performance: This relay built-in pure copper enameled wire, lower temperature rise and stronger suction power. Silver alloy contacts have good thermal stability and high temperature resistance. The plug has strong conductivity, effectively resists contact sticking, and has a long service life.
- Sufficient Quantity: The package comes with 4 pieces of automotive replacement equipment relays, enough to meet your using and replacing demands in daily life, bringing you lots of convenience.
- Plug and Play: Compatible with the most universal 12V 5-Pin automotive relay with a 40A switching capability. Easy to process your demand. Please check the dimensions and the direction of the poles carefully before ordering to avoid buying the incorrect product.
- 5 Pin SPDT (Single Pole Double Throw) Bosch
Style Electrical Relay. - 40A/30A High Switching Capability. These relays have a universal application and can be used in a 12 Volt DC power source, such as automotive setups, car sound systems, security systems, and various other applications.
- Pin Specifications: 30V DC. Ground (85), Trigger (86), Output N/C (87a), and Output N/O (87).
- Maximum Applied Voltage: 15.6 V DC; Max Operating Voltage is 27V DC; Nominal Coil Voltage: 12 V DC; Max Operating Current: 40A; Must Operate Voltage: 6~8 V DC; Must Release Voltage: 0.6~3.6 V DC; Coil Power: 1.8 W; Coil Resistance: 80 ฮฉ; Insulation Resistance: 100Mฮฉ
- Package include: 10 pack electrical relays. Sockets are not included
Style Electrical 
- [BOSCH EXPERTISE] - Bosch has been producing relays for vehicles and other applications for more than 40 years - this vast development experience ensures continuous advancement in design features to deliver optimum performance
- [COMPACT SWITCHING] - Bosch Mini Relays feature a compact design and are used in a wide range of vehicles to perform switching operations
- [PREMIUM PERFORMANCE] - Bosch relays incorporate only the highest quality materials for reliable, long-term performance and a 250,000 switching cycle capability
- [SUPERIOR ENGINEERING] - Engineered with high corrosion resistance to ensure long term reliability in harsh environments and conditions
- 5 pins, 12V, 30A; Integral bracket mount; Black Note: Both 87 pins (no 87a) are permanently connected. Relay should be wired like a 4 pin. Not for use where a true 5 pin relay is required
![True MODS 6 Pack 4-Pin 12V Bosch Style Fused Relay Switch Kit [Interlocking Harness Socket Holder] [14 AWG Hot Wires] [SPST] [30 Amp] 12 Volt Automotive relays with Fuse for Auto Cars](https://m.media-amazon.com/images/I/51MMNm9AK5L.jpg "Electrical Relay May Overheat and Cause Fire - 2021 Renegade RV Vienna & Villagio Motorhomes 52")
- Built in fuse socket with included 30A blade fuse with heavy duty 14AWG wires for main contact.
- Bosch style 4-Pin SPST (Single Pole Single Throw) Relay.
- 12VDC (14V Max) and 30A High Switching Capability.
- Wire Specifications: Black - Ground (85), Red - VDC (30), White - Trigger (86), Blue - Output N/O (87).
- Set includes 6 relays, 6 relay harnesses, and 6 blade fuses.
- Upgraded Version - Automotive relays built in fuse socket included 30A blade fuses with heavy duty 14AWG wires for main contact. No need of a separate fuse holder, saving space and money. Bosch style 4-Pin SPST (Single Pole Single Throw) Relay.
- Mounting Design Feature - The interlocking mounting design of unique male and female slot on each socket edge, connect relays together and manage cables easily, offering clean and neat installation.
- Easy Wiring - The relay sockets come with color-labeled wires for load/accessories convenient wiring. Black - Ground (85), Red - VDC (30), White - Trigger (86), Blue - Output N/O (87)
- Wide Application - Widely used in car keys power control, over-load protection, trunk release, polarity change, power door lock/actuator control, change a low current output to high current, add ignition/accessory outputs, control motors/other electronics etc.
- Set includes 5 relays, 5 relay harnesses, and 5 30A blade fuses.
- Never go beyond its capabilities. Try to stay 10 to 15% below what the rate is for
- 12-volt 4-prong relay. Excellent water-repellent and dustproof ability, but not using it in water
- For the people whose relays are burning, please make sure you are making tight connections (especially on the load wires), read the specs on the item description, and ensure that the operating environment meets the safety requirements of the relay
- Be careful when inserting the relay into the socket. If you force it, you will bend the female connectors
- Thick 12 gauge wire for the load terminals. Easy to install just make sure you follow the wiring diagram. Works for both positive and negative activation
SEOCONTENT-START
IKON Verona XL Valencia Classic Veracruz Explorer Vienna Verona LE Villagio Renegade RV February 8, 2023 Page 1 IMPORTANT SAFETY RECALL Renegade RV Recall Campaign 22V268 February 28,2022 THIS NOTICE APPLIES TO YOUR VEHICLE Renegade RV 52216 State Road 15 Bristol, IN 46507 February 28, 2022 Attention: Renegade Owner This notice pertains to Vin. # Unit # This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Renegade RV has decided that a defect, which relates to motor vehicle safety, exists in certain 2021 Vienna/Villagio vehicles. Upon receipt of this notice contact your local service center to schedule an appointment to have the remedy performed. Renegade RV will execute this remedy (0.5 labor hours allotted for relay only). The service center is to order the part kit (# 4520068) that Renegade RV will supply at NO CHARGE and complete the repair for free. What is the issue: Possibility for a fire at the 110 VAC load center due to heat from the Dayton/Snyder Electric relay. What is the safety risk: The possibility of the 110 VAC load center and or the DAYTON/Snyder Electric relay distorting, melting and up to causing a fire. Identify any warning which can precede or occur: Possibility of smell and/or smoke. What is the cause: Stranded wire used in a compression style connector causing heat within the relay. What is the Remedy: At no cost to the customer, Renegade will remove jumper wire from Dayton/Snyder Electric relay to main breaker. Move S.J. wire from Dayton/Snyder Electric relay to main breaker. Remove the Dayton/Snyder Electric relay, remove 12 VDC trigger wires from the 110 VAC load center with the relay, cap off 12 VDC wires, using bell connectors, and secure behind load center with zip tie. Add decal by Firefly touch screen indicating โโDonโt use Range, Microwave or Air Conditioning unit unless coach is powered by shore or Generatorโ The Dayton/Snyder Electric relay does not allow for the range, microwave, or A/C to operate off the inverter by sensing shore/generator power through the transfer switch. IKON Verona XL Valencia Classic Veracruz Explorer Vienna Verona LE Villagio Renegade RV February 8, 2023 Page 2 Removal of the relay will allow the range, microwave, and A/C to operate on the inverter. Customer to be made aware of load management with this change. If you have incurred expense to remedy this issue prior to the date of this notice, you may have the opportunity to obtain reimbursement for that expense. For details, contact us at the number or email address provided. warranty@renegaderv.com Jaxon Prill-574-966-0166 John Wood-574-966-0193 If you believe that Renegade RV has failed, or is unable to remedy this defect without charge and within a reasonable amount of time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, S.E. Washington DC 20590; or call the toll free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safecar.gov. Renegade RV is committed to providing the best products that enable our customers to enjoy a mobile lifestyle and we apologize for any inconvenience this may cause. Best regards, Kirk Manring Customer Service Manager Renegade Mfg. Office: 574-966-0160 kmanring@renegaderv.com
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-268 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Submission Date : Kibbi, LLC APR 20, 2022 NHTSA Recall No. : 22V-268 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Kibbi, LLC Address : 52218 State Route 15 Bristol IN 46507 Company phone : 574-966-0196 Population : Number of potentially involved : NR Estimated percentage with defect : NR Vehicle Information : Vehicle 1 : 2021-2021 Renegade Rv Vienna,Villagio Vehicle Type : Body Style : Power Train : NR Descriptive Information : Remove Dayton/Snyder Electric relay from the 110 VAC load center due to the possibility of a thermal event due to stranded wire used in a compression style connector, on the relay, creating heat in the relay. Relay only used in this product for this time period. 148 units affected Production Dates : MAR 24, 2021 – NOV 02, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : Possibility for a thermal event at the 110 VAC load center due to heat from the Dayton/Snyder Electric relay. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : The possibility of the 110 VAC load center and or the DAYTON/Snyder Electric relay distorting, melting and up to a thermal event. Description of the Cause : Stranded wire used in a compression style connector causing heat within the relay. Identification of Any Warning that can Occur : Possibility of smell and/or smoke Involved Components : Part 573 Safety Recall Report 22V-268 Page 2 Component Name 1 : NR Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : 9/14/2021- Retail customer K34-1607 reached out for faulty relay. 9/15/2021-Relay ordered from vendor 9/21/2021-Relay received, sent to dealer for repair. 11/8/2021- Retail customer K14-0477 reached out for heat related damaged to relay 11/9/2021- Research relay, order new 110VAC load center without relay 11/22/2021- Received 110 VAC load center, sent to dealer for repair 1/6/2022- Dealer reached out for heat related damage to relay for K14-0503 1/7/2022- New 110 VAC load center, without relay, sent out to dealer for repair 3/23/2022-Dealer reached out for heat related damage to relay for K34-1494 3/23/2022- New 110 VAC load center, without relay, sent to dealer for repair The information contained in this report was submitted pursuant to 49 CFR ยง573 Part 573 Safety Recall Report 22V-268 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 Description of Remedy : Description of Remedy Program : At no cost to the customer, Renegade will remove jumper wire from Dayton/Snyder Electric relay to main breaker. Move S.J. wire from Dayton/Snyder Electric relay to main breaker. Remove the Dayton/Snyder Electric relay, remove 12 VDC trigger wires from the 110 VAC load center with the relay, cap off 12 VDC wires, using bell connectors, and secure behind load center with zip tie. Add decal by Firefly touch screen indicating โโDonโt use Range, Microwave or Air Conditioning unit unless coach is powered by shore or Generatorโ The Dayton/Snyder Electric relay does not allow for the range, microwave, or A/C to operate off the inverter by sensing shore/generator power through the transfer switch. Removal of the relay will allow the range, microwave, and A/C to operate on the inverter. Customer to be made aware of load management with this change. How Remedy Component Differs from Recalled Component : Identify How/When Recall Condition was Corrected in Production : Relay is removed similar to current production standards Dayton/Snyder Electric relay removed starting 11/03/2021 Recall Schedule : Description of Recall Schedule : NR Planned Dealer Notification Date : APR 29, 2022 – JUN 04, 2022 Planned Owner Notification Date : APR 29, 2022 – JUN 04, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-268 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Submission Date : Kibbi, LLC MAY 02, 2022 NHTSA Recall No. : 22V-268 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Kibbi, LLC Address : 52218 State Route 15 Bristol IN 46507 Company phone : 574-966-0196 Population : Number of potentially involved : 146 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2021-2021 Renegade Rv Vienna,Villagio Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Remove Dayton/Snyder Electric relay from the 110 VAC load center due to the possibility of a thermal event due to stranded wire used in a compression style connector, on the relay, creating heat in the relay. Relay only used in this product for this time period. 148 units affected Production Dates : MAR 24, 2021 – NOV 02, 2021 VIN Range 1 : Begin : W1X8E33Y3LN127761 End : W1X8E33Y9MN161205 VIN Range 2 : Begin : W1X8E33Y3LN127761 End : W1X8E33Y9MN161205 VIN Range 3 : Begin : W1X8E33Y3LN127761 End : W1X8E33Y9MN161205 VIN Range 4 : Begin : W1X8E33Y3LN127761 End : W1X8E33Y9MN161205 VIN Range 5 : Begin : W1X8E33Y3LN127761 End : W1X8E33Y9MN161205 VIN Range 6 : Begin : W1X8E33Y3LN127761 End : W1X8E33Y9MN161205 VIN Range 7 : Begin : W1X8E33Y3LN127761 End : W1X8E33Y9MN161205 VIN Range 8 : Begin : W1X8E33Y3LN127761 End : W1X8E33Y9MN161205 VIN Range 9 : Begin : W1X8E33Y3LN127761 End : W1X8E33Y9MN161205 โ Not sequential โ Not sequential โ Not sequential โ Not sequential โ Not sequential โ Not sequential โ Not sequential โ Not sequential โ Not sequential Description of Defect : Description of the Defect : Possibility for a thermal event at the 110 VAC load center due to heat from the Dayton/Snyder Electric relay. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : The possibility of the 110 VAC load center and or the DAYTON/Snyder Electric relay distorting, melting and up to a thermal event. Part 573 Safety Recall Report 22V-268 Page 2 Description of the Cause : Stranded wire used in a compression style connector causing heat within the relay. Identification of Any Warning that can Occur : Possibility of smell and/or smoke Involved Components : Component Name 1 : Dayton/Snyder electric relay Component Description : Solid state relay-3 to 32V DC-EL1EGK4- Component Part Number : 98546 Supplier Identification : Component Manufacturer Name : Renegade RV Address : 52216 State Road 15 Bristol 46507 Country : United States Chronology : 9/14/2021- Retail customer K34-1607 reached out for faulty relay. 9/15/2021-Relay ordered from vendor 9/21/2021-Relay received, sent to dealer for repair.0-deaths 0-injuries 11/8/2021- Retail customer K14-0477 reached out for heat related damaged to relay 11/9/2021- Research relay, order new 110VAC load center without relay 11/22/2021- Received 110 VAC load center, sent to dealer for repair 0Deaths 0-injuries 1/6/2022- Dealer reached out for heat related damage to relay for K14-0503 1/7/2022- New 110 VAC load center, without relay, sent out to dealer for repair 0-Deaths 0-injuries 3/23/2022-Dealer reached out for heat related damage to relay for K34-1494 3/23/2022- New 110 VAC load center, without relay, sent to dealer for repair 0-deaths 0-injuries The information contained in this report was submitted pursuant to 49 CFR ยง573 Part 573 Safety Recall Report 22V-268 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 Description of Remedy : Description of Remedy Program : At no cost to the customer, Renegade will remove jumper wire from Dayton/Snyder Electric relay to main breaker. Move S.J. wire from Dayton/Snyder Electric relay to main breaker. Remove the Dayton/Snyder Electric relay, remove 12 VDC trigger wires from the 110 VAC load center with the relay, cap off 12 VDC wires, using bell connectors, and secure behind load center with zip tie. Add decal by Firefly touch screen indicating โโDonโt use Range, Microwave or Air Conditioning unit unless coach is powered by shore or Generatorโ The Dayton/Snyder Electric relay does not allow for the range, microwave, or A/C to operate off the inverter by sensing shore/generator power through the transfer switch. Removal of the relay will allow the range, microwave, and A/C to operate on the inverter. Customer to be made aware of load management with this change. How Remedy Component Differs from Recalled Component : Identify How/When Recall Condition was Corrected in Production : Relay is removed similar to current production standards Dayton/Snyder Electric relay removed starting 11/03/2021 Recall Schedule : Description of Recall Schedule : Letter to customer will sent via mail starting 4/29/2022 will proceed through 5/13/2022. Dealer letters will be sent with recall kit. Planned Dealer Notification Date : APR 29, 2022 – JUN 04, 2022 Planned Owner Notification Date : APR 29, 2022 – JUN 04, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-268 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Submission Date : Kibbi, LLC JUN 02, 2022 NHTSA Recall No. : 22V-268 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Kibbi, LLC Address : 52218 State Route 15 Bristol IN 46507 Company phone : 574-966-0196 Population : Number of potentially involved : 146 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2021-2021 Renegade Rv Vienna,Villagio Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Remove Dayton/Snyder Electric relay from the 110 VAC load center due to the possibility of a thermal event due to stranded wire used in a compression style connector, on the relay, creating heat in the relay. Relay only used in this product for this time period. 148 units affected Production Dates : MAR 24, 2021 – NOV 02, 2021 VIN Range 1 : Begin : W1X8E33Y3LN127761 End : W1X8E33Y9MN161205 VIN Range 2 : Begin : W1X8E33Y3LN127761 End : W1X8E33Y9MN161205 VIN Range 3 : Begin : W1X8E33Y3LN127761 End : W1X8E33Y9MN161205 VIN Range 4 : Begin : W1X8E33Y3LN127761 End : W1X8E33Y9MN161205 VIN Range 5 : Begin : W1X8E33Y3LN127761 End : W1X8E33Y9MN161205 VIN Range 6 : Begin : W1X8E33Y3LN127761 End : W1X8E33Y9MN161205 VIN Range 7 : Begin : W1X8E33Y3LN127761 End : W1X8E33Y9MN161205 VIN Range 8 : Begin : W1X8E33Y3LN127761 End : W1X8E33Y9MN161205 VIN Range 9 : Begin : W1X8E33Y3LN127761 End : W1X8E33Y9MN161205 โ Not sequential โ Not sequential โ Not sequential โ Not sequential โ Not sequential โ Not sequential โ Not sequential โ Not sequential โ Not sequential Description of Defect : Description of the Defect : Possibility for a thermal event at the 110 VAC load center due to heat from the Dayton/Snyder Electric relay. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : The possibility of the 110 VAC load center and or the DAYTON/Snyder Electric relay distorting, melting and up to a thermal event. Part 573 Safety Recall Report 22V-268 Page 2 Description of the Cause : Stranded wire used in a compression style connector causing heat within the relay. Identification of Any Warning that can Occur : Possibility of smell and/or smoke Involved Components : Component Name 1 : Dayton/Snyder electric relay Component Description : Solid state relay-3 to 32V DC-EL1EGK4- Component Part Number : 98546 Supplier Identification : Component Manufacturer Name : Patrick Industries Address : NR NR Country : United States Chronology : 9/14/2021- Retail customer K34-1607 reached out for faulty relay. 9/15/2021-Relay ordered from vendor 9/21/2021-Relay received, sent to dealer for repair.0-deaths 0-injuries 11/8/2021- Retail customer K14-0477 reached out for heat related damaged to relay 11/9/2021- Research relay, order new 110VAC load center without relay 11/22/2021- Received 110 VAC load center, sent to dealer for repair 0Deaths 0-injuries 1/6/2022- Dealer reached out for heat related damage to relay for K14-0503 1/7/2022- New 110 VAC load center, without relay, sent out to dealer for repair 0-Deaths 0-injuries 3/23/2022-Dealer reached out for heat related damage to relay for K34-1494 3/23/2022- New 110 VAC load center, without relay, sent to dealer for repair 0-deaths 0-injuries The information contained in this report was submitted pursuant to 49 CFR ยง573 Part 573 Safety Recall Report 22V-268 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 Description of Remedy : Description of Remedy Program : At no cost to the customer, Renegade will remove jumper wire from Dayton/Snyder Electric relay to main breaker. Move S.J. wire from Dayton/Snyder Electric relay to main breaker. Remove the Dayton/Snyder Electric relay, remove 12 VDC trigger wires from the 110 VAC load center with the relay, cap off 12 VDC wires, using bell connectors, and secure behind load center with zip tie. Add decal by Firefly touch screen indicating โโDonโt use Range, Microwave or Air Conditioning unit unless coach is powered by shore or Generatorโ The Dayton/Snyder Electric relay does not allow for the range, microwave, or A/C to operate off the inverter by sensing shore/generator power through the transfer switch. Removal of the relay will allow the range, microwave, and A/C to operate on the inverter. Customer to be made aware of load management with this change. How Remedy Component Differs from Recalled Component : Identify How/When Recall Condition was Corrected in Production : Relay is removed similar to current production standards Dayton/Snyder Electric relay removed starting 11/03/2021 Recall Schedule : Description of Recall Schedule : Letter to customer will sent via mail starting 4/29/2022 will proceed through 5/13/2022. Dealer letters will be sent with recall kit. Planned Dealer Notification Date : APR 29, 2022 – JUN 04, 2022 Planned Owner Notification Date : APR 29, 2022 – JUN 04, 2022 * NR – Not Reported
SEOCONTENT-END
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.