โThis site contains affiliate links for which OEMDTC may be compensatedโ |
May 23, 2022 NHTSA CAMPAIGN NUMBER: 22E042000
Swing Up Table Could Drop Unexpectedly
A table that drops unexpectedly can increase the risk of injury.
NHTSA Campaign Number: 22E042
Manufacturer Red Rock LLC
Components EQUIPMENT
Potential Number of Units Affected 944
Summary
Red Rock, LLC (Red Rock) is recalling certain Swing Up Table Bases with part number 141018-04. The base may have incomplete welds that are unable to hold the intended weight for the table, causing the table to drop unexpectedly.
Remedy
Dealers will replace the swing up table base, free of charge. Owner notification letters were mailed June 2, 2022. Owners may contact Red Rock Supply customer service at 1-574-535-0192.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Red Rock LLC has decided that a defect, which relates to motor vehicle safety, exists in certain Swing Up Table Base (P/N 141018-04).
WHY DOES MY VEHICLE NEED REPAIRS?
The affected units may have incomplete welds that do not hold the weight rating required for this unit. The table could potentially drop down in the upright or closed position. Which can allow the table to drop unexpectedly, increasing the risk of injury.
WHAT WILL YOUR DEALER DO?
Replace the Swing Up Table base. This repair will take approximately .30 hours. The repair will be done free of charge to the consumer.
WHAT SHOULD YOU DO?
Contact the Recreational Vehicle Manufacturer to have the component replaced.
WHO SHOULD YOU CONTACT WITH FURTHER QUESTIONS OR CONCERNS?
If you have questions or concerns about this recall, please contact Red Rock customer service at (574) 5350192 your Recreational Vehicle Manufacturer via phone or email.
If your Red Rock or your dealer fails or is unable to remedy this defect without charge, or within a reasonable amount of time, you may submit a written complaint to:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey AVE SE
Washington, DC 20590
You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov.
WHAT IF YOU ARE A LESSOR?
Federal law requires that you forward a copy of this safety recall notice to the lessee within 10 days.
WHAT IF YOU HAVE ALREADY PAID FOR THIS REPAIR?
You may be eligible to receive a reimbursement for the cost of repairs made prior to receiving this notice. You may submit your receipts along with the attached Reimbursement Request Form by mail Red Rock LLC 1845 Hemlock Ct. Goshen, IN 46528.
Chronology :
On May 9, 2022, Red Rock LLC (โRed Rock Supplyโ) was advised by its U.S. based customer that it had been made aware of reports that some welds holding the pieces to the dinette table base were breaking and not holding to the proper weight rating. Red Rock Supply worked with its customers to quarantine the product and Red Rock commenced a product review to better understand these reports.
On May 13, 2022, Red Rock identified certain batch of swing up table bases where the welds were not fully completed.
On May 17, 2022, Red Rock decided that a safety-related defect exists in certain swing up table bases. There were no injuries before the recall was submitted. Also, there have been no injuries reported to date.
1 Affected Product
Equipment
BRAND | PART NO. | PRODUCTION DATES |
RED ROCK | SWING UP TABLE BASE |
13 Associated Documents
Defect Notice 573 Report
RCLRPT-22E042-8212.PDF 213.46KB
Recall 573 Report
RCLRPT-22E042-5674.PDF 213.46KB
Recall Acknowledgement
Recall 573 Report – 9/20/2022
RCLRPT-22E042-7317.PDF 242.171KB
Recall 573 Report – 9-19-2022
RCLRPT-22E042-2452.PDF 241.857KB
ISSUED Owner Notification Letter(Part 577)
RCONL-22E042-9192.pdf 157.444KB
Recall Quarterly Report #1, 2022-2
RCLQRT-22E042-5068.PDF 211.386KB
Recall Quarterly Report #4, 2023-1
RCLQRT-22E042-8256.PDF 211.38KB
Recall Quarterly Report #2, 2022-4
RCLQRT-22E042-6667.PDF 211.38KB
Recall Quarterly Report #1, 2022-2
RCLQRT-22E042-0354.PDF 211.116KB
Recall Quarterly Report #3, 2022-4
RCLQRT-22E042-9219.PDF 211.38KB
Recall Quarterly Report #5, 2023-2
RCLQRT-22E042-7453.PDF 211.711KB
Recall Quarterly Report #6, 2023-3
RCLQRT-22E042-5309.PDF 211.711KB
Latest Recalls Documents
โThis site contains affiliate links for which OEMDTC may be compensatedโ |
- CASUAL DINING >>> This indoor table top offers plenty of style to compliment your restaurant dining space. With a reversible top design just select the finish that best suits your establishment then add a compatible base. Seats up to 2 adults.
- Laminate top, high impact melamine core, heat and moisture resistant
- Reversible top, black or walnut finish, easy to clean with mild detergent, wipe dry
- Classic reversible design, black edge band protects finish
- PRODUCT MEASUREMENTS: Overall Size: 24"W x 30"D x 1.125"H; No Assembly Required
- Multi-Use Table: Creates a convenient tabletop while on the go; Perfect for RVs, campsites, picnics and patios
- Durable Construction: Constructed of durable aluminum
- Weight Capacity: Supports up to 110 lb.
- Dimensions: Measures 19 ยฝ-inches (L) x 20-inches (W) x 24 ยผ-inches (H) when set up
- Folds for Convenient Storage: Folds to a compact 19 ยฝ-inches (L) x 2-inches (W) x 28 ยผ-inches (H)
- Standard RV Table Base: 6.5 inches outer diameter and 2.25 inches inner diameter, the 2 piece RV table base mount is specially designed for both ends of the table pole. Fit for most standard RV tables with pedestal or centered bases.
- Rust and Corrosion-Resistant: The RV table base mount is made of durable chrome-plated aluminum, featuring corrosion-resistant and scratch-resistant. Polished surface leave the floor underneath intact.
- Stable Mount: Camper
table base mount comes with 6 screws to holds the leg securely, provide more stability and stronger support for your RV dinette table.
- Easy to Install: Include 2 pack camper
table leg base, a pack of screws. The short screws for mounting to the table while the long screws for mounting to the floor.
- Complete RV Table Bases: Our RV pedestal table base flanges includes aluminum RV table base mount x 2, long Screws x 8, short screws x 8. All the RV table bracket accessories are included to satisfy your straight installation.
- 2 Pack: 11.8"W x 15.7"D x 25.6"H, contain 2 side table which perfect in a tight space for your living room or bedroom
- Sturdy Support: Holds 20 lbs without wobbling or sagging, thanks to the extra triangular metal pieces
- Put It Closer: C-shape design will help completely slide under couch. You wonโt be bending down to use laptop when sitting on the sofa, convenient working or studying
- Easy Assembly: Detail instruction included, setup it alone in just a few minutes (Tips: please distinguishing the long and short screws)
- More Useful Details: The rounded corners doesn't hurt your children when they accidentally bumped it. Adjustable feet keep it balanced on slightly uneven floors, so it wonโt wobble when you put the water cup on
- Two (2 Total) RV Table Legs - Straight Non-folding - Black Poweder Coated with Plastic Bases
- RV Table Legs - these are not for use as bed legs or supports, bases will not support weight.
- Includes 2 bases per leg - Plastic Surface Mount Base - does not require drilling a hole in floor to install - Outer Diameter 6.5"
- Please note due to manufacturing process sharp edges may be present, use caution when handling.
- Leg Length: 2" Diameter x 27.5" Long -- Overall Leg Length With Bases Attached: 28.25" Long
- Restaurant Dining Table Top
- Top with 1.25" Thick Drop Edge
- Self Edge
- Gray Marble Laminate Finish
- Heat, Scratch and Moisture Resistant
- Adjustable Height: Portal folding table designed with telescoping aluminum legs for different heights starting at 17.7" to 27.5" to fit uneven surfaces and meet the demands for your next camping adventure
- Extra Storage Space: Mesh bottom layer provides more space and holds more stuff for you; it can be removed quickly from the 4 legs when you don't need
- Easy To Carry: The aluminum slat table top can be rolled up; legs are foldable with non-skid feet. Included carry bag makes the table extremely compact for easy storage and transportation
- Quick Setup: Assembly can be finished in 1 minute; the strength and stability will exceed your expectations; perfect for camping tailgating or backyard use
- Specifitions: Overall dimensions: 35.4'' L x20.9'' W x27.5'' H; folded dimensions: 7.1'' L x5.1'' W x35.4'' H; weight: 9 lbs(4.2 kg); Weight Capacity: 132 lbs(60 kg)
- MULTIFUNCTIONAL TRAY TABLE - This TV tray is extremely practical and is ideal for home use. Place it at the edge of your sofa or bed and use it as a TV dinner tray , a bed table , a movable workstation, a snack tray and so on. Perfect for all situations
- HEIGHT & ANGLES ADJUSTABLE - Our TV trayโs height can be fully adjusted from 21.53" to 28.74" and can be adjusted horizontally 1 angle downwards and 1 angle upwards . Easily adjust the height and angle to a find the most comfortable position so you can work or watch a movie without straining your neck or back
- STABILIZING ROD: Design includes an additional base rod to help make this TV tray more stable. Tray measures 20.47โ wide by 15.5โ deep. Take out the rod then you could fold up this tray table.
- ASSEMBLE & STORE EASILY - You can assemble this TV tray in 5 minutes or less. After use, you can fold it to its compact size and store it next to a couch or in a closet so it wonโt take up any needed space around your home
- HOW TO BE LEVEL: If the table tray could not be level after assembly, please take off the tilt bar, assemble it reverse, then the tv tray would be flat.
- Upgraded RV Table Legs: Add a cap on each end of the RV table legs to mount on the RV table bases for more stability to support RV table
- Aluminum RV Table Legs and Bases: RV table leg system comes with aluminum RV table leg and base. Aluminum RV table leg is design to work with metal RV table base mount and provide a stable support. The RV table base mount 6.5 inches outer diameter and 2.25 inches inner diameter, specially designed for both ends of the RV table pole.
- Rust and Corrosion-Resistant: The RV table base mount and legs are made of durable chrome-plated aluminum, featuring corrosion-resistant and scratch-resistant. Polished surface leave the floor underneath intact.
- Stable Mount: Camper
table legs and base mount comes with 6 screws to holds the leg securely, provide more stability and stronger support for your RV dinette table. No need to drill hole in floor.
- Easy to Install: The surface mount floor base attaches with long screws and the table base flange attaches to dinette table with short screws that meet your tables requirement. Slide RV table pole into camper
table base mount and press to secure.
- HEAVY-DUTY TABLE TOP: Place food, drinks, and much more on the strong, easy-to-clean table top with dense plastic up to 17% thicker than other brands, plus 3x the weight capacity at 300 lbs.
- INDOOR/OUTDOOR USE: Versatile use makes it ideal as a dining or game table for outdoor cookouts or birthday parties, or as a serving or display table for indoor events
- STURDY SUPPORT: Powder-coated steel legs, frame joint locks, and non-slip rubber feet help to keep the table in place during every event
- PORTABLE: Foldable design includes a side lock and handle, making it easy to take on the go or store away in a compact space when not in use
- EASY ASSEMBLY: Table is ready for use right out of the box; simply unfold it, lock the legs to keep it sturdy, and your table is good to go!; OVERALL DIMENSIONS: 48"(L) x 24"(W) x 29"(H); Weight Capacity: 300 lbs.
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Red Rock LLC
IMPORTANT SAFETY RECALL
This notice applies to your vehicle
NHTSA Recall No. 22E042
June 1, 2022
Dear Owner,
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Red Rock LLC has decided that a defect, which relates to motor vehicle safety, exists in certain Swing Up Table Base (P/N 141018-04).
WHY DOES MY VEHICLE NEED REPAIRS?
The affected units may have incomplete welds that do not hold the weight rating required for this unit. The table could potentially drop down in the upright or closed position. Which can allow the table to drop unexpectedly, increasing the risk of injury.
WHAT WILL YOUR DEALER DO?
Replace the Swing Up Table base. This repair will take approximately .30 hours. The repair will be done free of charge to the consumer.
WHAT SHOULD YOU DO?
Contact the Recreational Vehicle Manufacturer to have the component replaced.
WHO SHOULD YOU CONTACT WITH FURTHER QUESTIONS OR CONCERNS?
If you have questions or concerns about this recall, please contact Red Rock customer service at (574) 5350192 your Recreational Vehicle Manufacturer via phone or email.
If your Red Rock or your dealer fails or is unable to remedy this defect without charge, or within a reasonable amount of time, you may submit a written complaint to:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey AVE SE
Washington, DC 20590
You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov.
WHAT IF YOU ARE A LESSOR?
Federal law requires that you forward a copy of this safety recall notice to the lessee within 10 days.
WHAT IF YOU HAVE ALREADY PAID FOR THIS REPAIR?
You may be eligible to receive a reimbursement for the cost of repairs made prior to receiving this notice. You may submit your receipts along with the attached Reimbursement Request Form by mail Red Rock LLC 1845 Hemlock Ct. Goshen, IN 46528.
We apologize for any inconvenience and thank you for your attention to this safety matter.
Sincerely,
Red Rock LLC
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-042
The information contained in this report was submitted pursuant to 49 CFR ยง573
Manufacturer Name : Red Rock LLC
Submission Date : MAY 23, 2022
NHTSA Recall No. : 22E-042
Manufacturer Recall No. : NR
Manufacturer Information :
Manufacturer Name : Red Rock LLC
Address : 1845 Hemlock Ct.
Goshen IN 46528
Company phone : 535-0192
Population :
Number of potentially involved : 944
Estimated percentage with defect : 20 %
Equipment Information :
Brand / Trade 1 : Red Rock
Model : Swing Up Table Base
Part No. : 141018-04
Size : NR
Function : NR
Descriptive Information : The recall is based on the possibility of welds breaking on a certain population of
Table Bases between the dates of January 24, 2022 and May 9, 2022. The total
number effected is 944 table bases.
Production Dates : JAN 24, 2022 – MAY 09, 2022
Description of Defect :
Description of the Defect : The affected units may have incomplete welds that do not hold the weight
rating required for this unit.
FMVSS 1 : NR
FMVSS 2 : NR
Description of the Safety Risk : The table could potentially drop down in the upright or closed position
Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR
Involved Components :
Part 573 Safety Recall Report 22E-042 Page 2
The information contained in this report was submitted pursuant to 49 CFR ยง573
Component Name : Swing Up Table Base
Component Description : Adjustable Dinette/Sofa Table
Component Part Number : 141018-04
Supplier Identification :
Component Manufacturer
Name : Changshu Rongteng Technology
Address : NO. 246 Mocheng Avenue Mocheng St.
Changshu Foreign States
Country : China
Chronology :
On May 9, 2022, Red Rock LLC (โRed Rock Supplyโ) was advised by its U.S. based customer that it had been
made aware of reports that some welds holding the pieces to the dinette table base were breaking and not
holding to the proper weight rating. Red Rock Supply worked with its customers to quarantine the product and
Red Rock commenced a product review to better understand these reports. On May 13, 2022, Red Rock
identified certain batch of swing up table bases where the welds were not fully completed. On May 17, 2022,
Red Rock decided that a safety-related defect exists in certain swing up table bases.
Description of Remedy :
Description of Remedy Program : Replace the Swing Up Table Base
How Remedy Component Differs
from Recalled Component :
The remedy component has complete welds
Identify How/When Recall Condition
was Corrected in Production :
Red Rock LLC ceased distribution of this product on May 9, 2022 when it
was made aware of the possibility of incomplete welds.
Recall Schedule :
Description of Recall Schedule : Contact the Recreational Vehicle Manufacturer to have the component
replaced.
Planned Dealer Notification Date : JUN 01, 2022 – DEC 01, 2022
Planned Owner Notification Date : JUN 01, 2022 – DEC 01, 2022
Part 573 Safety Recall Report 22E-042 Page 3
The information contained in this report was submitted pursuant to 49 CFR ยง573
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or
installation in new motor vehicles or new items of motor vehicle equipment:
Name : NR
Address : NR
NR
Country : NR
Company Phone : NR
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-042
The information contained in this report was submitted pursuant to 49 CFR ยง573
Manufacturer Name : Red Rock LLC
Submission Date : SEP 20, 2022
NHTSA Recall No. : 22E-042
Manufacturer Recall No. : NR
Manufacturer Information :
Manufacturer Name : Red Rock LLC
Address : 1845 Hemlock Ct.
Goshen IN 46528
Company phone : 535-0192
Population :
Number of potentially involved : 944
Estimated percentage with defect : 20 %
Equipment Information :
Brand / Trade 1 : Red Rock
Model : Swing Up Table Base
Part No. : 141018-04
Size : NR
Function : NR
Descriptive Information : The recall is based on the possibility of welds breaking on a certain population of
Table Bases between the dates of January 24, 2022 and May 9, 2022. The total
number effected is 944 table bases.
Production Dates : JAN 24, 2022 – MAY 09, 2022
Description of Defect :
Description of the Defect : The affected units may have incomplete welds that do not hold the weight
rating required for this unit. This could increase the risk for injury.
FMVSS 1 : NR
FMVSS 2 : NR
Description of the Safety Risk : The table could potentially drop down in the upright or closed position
increasing the risk of injury.
Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR
Involved Components :
Part 573 Safety Recall Report 22E-042 Page 2
The information contained in this report was submitted pursuant to 49 CFR ยง573
Component Name : Swing Up Table Base
Component Description : Adjustable Dinette/Sofa Table
Component Part Number : 141018-04
Supplier Identification :
Component Manufacturer
Name : Changshu Rongteng Technology
Address : NO. 246 Mocheng Avenue Mocheng St.
Changshu Foreign States
Country : China
Chronology :
On May 9, 2022, Red Rock LLC (โRed Rock Supplyโ) was advised by its U.S. based customer that it had been
made aware of reports that some welds holding the pieces to the dinette table base were breaking and not
holding to the proper weight rating. Red Rock Supply worked with its customers to quarantine the product and
Red Rock commenced a product review to better understand these reports. On May 13, 2022, Red Rock
identified certain batch of swing up table bases where the welds were not fully completed. On May 17, 2022,
Red Rock decided that a safety-related defect exists in certain swing up table bases. There were no injuries
before the recall was submitted. Also, there have been no injuries reported to date.
Description of Remedy :
Description of Remedy Program : Replace the Swing Up Table Base
How Remedy Component Differs
from Recalled Component :
The remedy component has complete welds
Identify How/When Recall Condition
was Corrected in Production :
Red Rock LLC ceased distribution of this product on May 9, 2022 when it
was made aware of the possibility of incomplete welds.
Recall Schedule :
Description of Recall Schedule : Contact the Recreational Vehicle Manufacturer to have the component
replaced.
Planned Dealer Notification Date : JUN 01, 2022 – DEC 01, 2022
Planned Owner Notification Date : JUN 01, 2022 – DEC 01, 2022
Part 573 Safety Recall Report 22E-042 Page 3
The information contained in this report was submitted pursuant to 49 CFR ยง573
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or
installation in new motor vehicles or new items of motor vehicle equipment:
Name : Keystone RV Company
Address : 2642 Hackberry Drive
Goshen IN 46526
Country : US
Company Phone : 5745352100
Name : Forest River
Address : 55470 County Road 1
Elkhart IN 46514
Country : US
Company Phone : 5748256242
Name : Alliance RV
Address : 301 Benchmark Dr.
Elkhart IN 46516
Country : US
Company Phone : 2602292621
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-042
The information contained in this report was submitted pursuant to 49 CFR ยง573
Manufacturer Name : Red Rock LLC
Submission Date : MAY 23, 2022
NHTSA Recall No. : 22E-042
Manufacturer Recall No. : NR
Manufacturer Information :
Manufacturer Name : Red Rock LLC
Address : 1845 Hemlock Ct.
Goshen IN 46528
Company phone : 535-0192
Population :
Number of potentially involved : 944
Estimated percentage with defect : 20 %
Equipment Information :
Brand / Trade 1 : Red Rock
Model : Swing Up Table Base
Part No. : 141018-04
Size : NR
Function : NR
Descriptive Information : The recall is based on the possibility of welds breaking on a certain population of
Table Bases between the dates of January 24, 2022 and May 9, 2022. The total
number effected is 944 table bases.
Production Dates : JAN 24, 2022 – MAY 09, 2022
Description of Defect :
Description of the Defect : The affected units may have incomplete welds that do not hold the weight
rating required for this unit.
FMVSS 1 : NR
FMVSS 2 : NR
Description of the Safety Risk : The table could potentially drop down in the upright or closed position
Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR
Involved Components :
Part 573 Safety Recall Report 22E-042 Page 2
The information contained in this report was submitted pursuant to 49 CFR ยง573
Component Name : Swing Up Table Base
Component Description : Adjustable Dinette/Sofa Table
Component Part Number : 141018-04
Supplier Identification :
Component Manufacturer
Name : Changshu Rongteng Technology
Address : NO. 246 Mocheng Avenue Mocheng St.
Changshu Foreign States
Country : China
Chronology :
On May 9, 2022, Red Rock LLC (โRed Rock Supplyโ) was advised by its U.S. based customer that it had been
made aware of reports that some welds holding the pieces to the dinette table base were breaking and not
holding to the proper weight rating. Red Rock Supply worked with its customers to quarantine the product and
Red Rock commenced a product review to better understand these reports. On May 13, 2022, Red Rock
identified certain batch of swing up table bases where the welds were not fully completed. On May 17, 2022,
Red Rock decided that a safety-related defect exists in certain swing up table bases.
Description of Remedy :
Description of Remedy Program : Replace the Swing Up Table Base
How Remedy Component Differs
from Recalled Component :
The remedy component has complete welds
Identify How/When Recall Condition
was Corrected in Production :
Red Rock LLC ceased distribution of this product on May 9, 2022 when it
was made aware of the possibility of incomplete welds.
Recall Schedule :
Description of Recall Schedule : Contact the Recreational Vehicle Manufacturer to have the component
replaced.
Planned Dealer Notification Date : JUN 01, 2022 – DEC 01, 2022
Planned Owner Notification Date : JUN 01, 2022 – DEC 01, 2022
Part 573 Safety Recall Report 22E-042 Page 3
The information contained in this report was submitted pursuant to 49 CFR ยง573
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or
installation in new motor vehicles or new items of motor vehicle equipment:
Name : NR
Address : NR
NR
Country : NR
Company Phone : NR
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-042
The information contained in this report was submitted pursuant to 49 CFR ยง573
Manufacturer Name : Red Rock LLC
Submission Date : SEP 19, 2022
NHTSA Recall No. : 22E-042
Manufacturer Recall No. : NR
Manufacturer Information :
Manufacturer Name : Red Rock LLC
Address : 1845 Hemlock Ct.
Goshen IN 46528
Company phone : 535-0192
Population :
Number of potentially involved : 944
Estimated percentage with defect : 20 %
Equipment Information :
Brand / Trade 1 : Red Rock
Model : Swing Up Table Base
Part No. : 141018-04
Size : NR
Function : NR
Descriptive Information : The recall is based on the possibility of welds breaking on a certain population of
Table Bases between the dates of January 24, 2022 and May 9, 2022. The total
number effected is 944 table bases.
Production Dates : JAN 24, 2022 – MAY 09, 2022
Description of Defect :
Description of the Defect : The affected units may have incomplete welds that do not hold the weight
rating required for this unit. This could increase the risk for injury.
FMVSS 1 : NR
FMVSS 2 : NR
Description of the Safety Risk : The table could potentially drop down in the upright or closed position
increasing the risk of injury.
Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR
Involved Components :
Part 573 Safety Recall Report 22E-042 Page 2
The information contained in this report was submitted pursuant to 49 CFR ยง573
Component Name : Swing Up Table Base
Component Description : Adjustable Dinette/Sofa Table
Component Part Number : 141018-04
Supplier Identification :
Component Manufacturer
Name : Changshu Rongteng Technology
Address : NO. 246 Mocheng Avenue Mocheng St.
Changshu Foreign States
Country : China
Chronology :
On May 9, 2022, Red Rock LLC (โRed Rock Supplyโ) was advised by its U.S. based customer that it had been
made aware of reports that some welds holding the pieces to the dinette table base were breaking and not
holding to the proper weight rating. Red Rock Supply worked with its customers to quarantine the product and
Red Rock commenced a product review to better understand these reports. On May 13, 2022, Red Rock
identified certain batch of swing up table bases where the welds were not fully completed. On May 17, 2022,
Red Rock decided that a safety-related defect exists in certain swing up table bases.
Description of Remedy :
Description of Remedy Program : Replace the Swing Up Table Base
How Remedy Component Differs
from Recalled Component :
The remedy component has complete welds
Identify How/When Recall Condition
was Corrected in Production :
Red Rock LLC ceased distribution of this product on May 9, 2022 when it
was made aware of the possibility of incomplete welds.
Recall Schedule :
Description of Recall Schedule : Contact the Recreational Vehicle Manufacturer to have the component
replaced.
Planned Dealer Notification Date : JUN 01, 2022 – DEC 01, 2022
Planned Owner Notification Date : JUN 01, 2022 – DEC 01, 2022
Part 573 Safety Recall Report 22E-042 Page 3
The information contained in this report was submitted pursuant to 49 CFR ยง573
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or
installation in new motor vehicles or new items of motor vehicle equipment:
Name : NR
Address : NR
NR
Country : NR
Company Phone : NR
* NR – Not Reported
SEOCONTENT-END