FL942 – Unexpected Engine Shut Down – 2019-2022 FCCC S2G

“This site contains affiliate links for which OEMDTC may be compensated”

June 20, 2022 NHTSA CAMPAIGN NUMBER: 22V439000

Unexpected Engine Shut Down

Unexpected engine shut down can increase the risk of a crash.

 

NHTSA Campaign Number: 22V439

Manufacturer Daimler TruckseBay North America, LLC

Components ENGINE AND ENGINE COOLING

Potential Number of Units Affected 262

 

Summary

Daimler TruckseBay North America, LLC (DTNA) is recalling certain 2019-2022 FCCC S2G vehicles equipped with 8.8L LPG engines. The engine control module (ECM) may set a fault code that results in an unexpected engine shut down.

 

Remedy

Dealers will update the ECM software, free of charge. Owner notification letters were mailed October 28, 2022. Owners may contact DTNA customer service at 1-800-547-0712. DTNA’s number for this recall is FL942.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 

Check for Daimler Trucks North America Recalls

 


Chronology :

In late May 2022, DTNA learned of an IC Bus recall in connection with certain 8.8 L propane-powered engines supplied by PSI, which DTNA also uses in its vehicles. Given this recall and the information identified, DTNA proactively assessed its available data to ascertain potential exposure, if any, to its vehicles. The assessment helped to connect limited pieces of information from a problem that DTNA had believed it solved.

DTNA’s analysis identified two service reports in or around January 2022 indicating potentially-related stalling phenomena, as well as one customer report from a fleet with error codes indicating emission-related codes, but no stalling. DTNA’s analysis also identified vehicles presenting error codes potentially related to the IC Bus issue in or around late February 2022—but again, without stalling. Given this information, in or around February 2022, DTNA attempted to induce a stalling condition but was unable to do so. At or around the same time, discussed the issue and tested a solution of replacing the ECMs on the affected vehicles, which seemed to resolve the fault codes and any possible stalling issue. Based upon that information, at that time DTNA reasonably concluded those issues to be resolved and not to present an unreasonable risk to motor vehicle safety. The problem was not known to recur until late-May 2022, when DTNA received a report that the fixed vehicles were again stalling and, at approximately the same time, learned of the IC recall. DTNA promptly opened an investigation.

While the information available to DTNA through that investigation is unclear, given IC Bus’s recall decision, viewed in conjunction with the contemporaneous stall reports and the information mustered by DTNA during its investigation, on June 17, 2022, out of an abundance of caution and in the interests of safety, DTNA decided to file a recall. To the best of DTNA’s knowledge, there are no reported deaths or injuries related to this issue.

In late June, 2022, DTNA discovered that a small number of S2G chassis may have been exported out of the United States. At about the same time, DTNA discovered that one C2 non-school bus was erroneously included in 22V438’s population. Upon learning of this information, DTNA immediately reviewed all pertinent facts available at the time and began the process of filing an amended DIR.

 


22E084 – Unexpected Engine Shut Down – Power Solutions InternationaleBay

 

22E084 – Unexpected Engine Shut Down – Power Solutions International

 


4 Affected Products

Vehicle

MAKEMODELYEAR
FCCCS2G2019-2022

 


12 Associated Documents

Defect Information Report

RMISC-22V439-6463.pdf 740.041KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [722.70 KB]

 


Defect Notice 573 Report

RCLRPT-22V439-3998.PDF 214.167KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.15 KB]

 


Recall Acknowledgement

RCAK-22V439-9116.pdf 691.656KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [675.45 KB]

 


Recall 573 Report – June 30, 2022

RCLRPT-22V439-3427.PDF 214.561KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.53 KB]

 


Amended Defect Information Report

RMISC-22V439-5030.pdf 740.217KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [722.87 KB]

 


ISSUED Interim Owner Notification Letter(Part 577)

RIONL-22V439-6074.pdf 148.295KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [144.82 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-22V439-1579.pdf 149.213KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [145.72 KB]

 


Recall 573 Report – October 20, 2022

RCLRPT-22V439-2654.PDF 214.499KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.47 KB]

 


Amended Defect Information Report

RMISC-22V439-2468.pdf 740.379KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [723.03 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-22V439-3128.pdf 148.553KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [145.07 KB]

 


Recall Quarterly Report #1, 2022-4

RCLQRT-22V439-6423.PDF 211.134KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.19 KB]

 


Recall Quarterly Report #2, 2023-1

RCLQRT-22V439-4730.PDF 211.233KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.28 KB]

 


Latest Recalls Documents

 


 

Bestseller No. 1
ANCEL Heavy Duty Truck Scanner HD601 All System Diesel Diagnostic Scan Tool fits for Cummins, Detroit, Freightliner, International, Paccar, Check Engine for Truck & Car 2 in 1 Code Reader
  • 【Extensive Compatibility】After the upgrade, the compatibility is wider and more accurate! HD601 heavy duty truck scanner supports all major truck models that comply with standard protocols (SAE J1939, SAE J1708, ISO 14230-4, ISO 15764-4 and ISO 9141-2, ISO 27145-4 and Euro6). Fits for CumminseBay, PaccareBay, Detroit, Perkins, FreightlinereBay, InternationaleBay, PeterbilteBay, FordeBay, Class 4-Class 8 trucks, etc. It also check engine diagnosis on most cars, minivans and light trucks
  • 【 Full System Diagnostic】HD601 Diesel Scanner supports all system scans of heavy trucks compliant with standard protocols SAE J1939 & J1708, such as Engine, ABSeBay, Transmission, Braking System, ESP, EPS, Fuel System, etc, It is a great scan tool fits for CumminseBay, CaterpillareBay, Detroit, Perkins, Maxxforce, BendixeBay,WabasheBay, Wabaco, HaldexeBay, Allison, EatoneBay heavy trucks, With this truck tool, you can get deep analysis data about the system and do some repairs by yourself, saving much time and money
  • 【Enhanced Diesel OBD Scanner】The HD601 Diesel OBD Scanner offers unparalleled diagnostic capabilities for heavy-duty trucks. Beyond code reading, clearing, and live data display, it retrieves vehicle information, freeze frames, and DTCs. With 6, 9, and 16 pin cables, it ensures compatibility with various engines. This scanner's real-world testing prowess ensures comprehensive support for a wide array of heavy-duty truck engines, making it an indispensable tool for truck diagnostics
  • 【DTC Library】+【Life Time Free Update】The built-in DTC library allows you to retrieve the codes directly without searching for the definition in the book. Whether you are a professional mechanic or a DIY car owner, HD601 diesel scanner explains the existing problem, makes it easier for you to understand the codes definition and fix the problem faster. Plus, you get a lifetime free internet updates, so you always have the latest software for diagnostics in English and Spanish languages
  • 【Friendly Design, Easy of Use】This scanner is plug and play, simple and convenient, and very friendly for beginners. With improved buttons for easy menu navigation. The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work.
Bestseller No. 2
ANCEL Heavy Duty Truck Scanner HD3300 Plus+ with DPF Reset/Force Regen Scanner, Full System Diesel Diagnostic Scan Tool for Cummins, Caterpillar, Detroit, Paccar Diesel Engines & 99% Commercial Cars
  • D.P.F Cleaner Doctor: As a long-term truck user, do you still struggle with clogged filters and engine slowdowns? The HD3300 PLUS+ professional DPF regeneration scanner offers complete D.P.F reset/forced regen, DPR status monitoring, and DPD regeneration capabilities to enhance engine performance and emission control efficiency. Compatible with CumminseBay, Detroit, Cat, InternationaleBay, VolvoeBay, MackeBay, PaccareBay, IsuzueBay, Hino, and Fuso major diesel engine brands. This heavy duty truck scanner effectively prevents soot and particulate buildup, helping you avoid costly ($4000 -$8000 ) D.P.F replacements.
  • Widely Compatible: This heavy duty truck scanner includes adapters like CAT-9 PIN, DIESEL 6&9 PIN, and OBD 16 PIN, supporting protocols such as J1587, J1939, J1708, J27145, ISO9141-2, ISO14230-2, and ISO15765-4. Built for heavy duty trucks or semi trucks powered by CumminseBay, CaterpillareBay, Detroit, or PaccareBay. So, this truck scanner diagnostic tool fit for FreightlinereBay, PeterbilteBay, VolvoeBay HD, MackeBay, InternationaleBay, FordeBay HD trucks. ANCEL HD3300 PLUS+ truck scanner ensures precise diagnostics and seamless problem-solving for an unparalleled user journey. !!!HD3300 Plus+ is designed for heavy-duty trucks and does NOT SUPPORT LIGHT-DUTY TRUCKS, PICKUP TRUCKS and 12V CARS!!
  • Full System Diesel Diagnostic Tool: HD3300 PLUS+ diesel scanner diagnostic tool provides depth diagnostics for all major systems, including Engine, Transmission, ABSeBay, EBS, ESC, ASR, Airbag, BCM, SCR, Instrument, Air Suspension, and DPF. As an ALL-IN-ONE diesel scanner, it supports HD OBD & OBD2 service modes, such as read/erase codes, and live data stream, ensuring quick and precise issue identification for optimal performance.
  • Anvanced Oil Light Reset Function: Changing oil is the most important part of routine maintenance for vehicle. HD3300 PLUS+ obd2 scanner for diesel trucks support OEM level oil reset for ISUZUeBay & FUSO &HINO, help reset the Oil Life Reminder (turn off the Oil Service Light) when the replacement of engine oil is done in case of the impurities in oil may damage the engine. So vehicles can recalculate another optimal oil life change interval depending on the vehicle driving conditions and climate, makes your driving safety gets ensuring.
  • Economize Your Budget: NO HIDDING UPDATE FEES!! The ANCEL HD3300 PLUS+ diesel mechanic tools offers one-click Lifetime F*ree Update, keeping you up-to-date with the latest features. Expert technical support for you a hassle-fr*ee experience. With this scanner, it can keep an eye on your truck condition in time!
Bestseller No. 3
ANCEL HD430 Heavy Duty Truck Scanner, DPF Reset & Forced Regeneration for Cummins & Caterpillar Engine, Full System HDOBD Diesel Scanner OBD2 Diagnostic Scan Tool Code Reader for Diesel Trucks & Cars
  • 【Wide Compatibility】HD430 supports 12V 24V trucks, equipped with diesel connectors (CAT-9, Diesel 6pin & 9pin) and OBDII 16pin, with strong truck adaptation and compatibility. Product supports SAE J1939, SAE J1708, SAE J1850 PWM, SAE J1850 VPW, ISO 14230-4, ISO 9141-2, ISO 15765-4, ISO 27145-4 truck protocols, provides complete scan & fast scan, and available in English and Spanish, it is suitable for DIY enthusiasts, old-school mechanics, truck owners or small repair shops.
  • 【 D.P.F Regen For Cunmmis & CaterpillareBay】HD430 supports CumminseBay and CaterpillareBay engines for D.P.F reset & regeneration, helping to remove diesel particles from truck D.P.F & meet maintenance schedules, thereby avoiding fault codes, maintaining engine performance, and extending DPF & truck life. Even if you aren't a professional mechanic, you can easily perform D.P.F regen using HD430 according to clear instructions, which can help your truck avoid roadside obstacles while reducing your repair time & cost.❕❕❕Note: Not compatible with pickups/light trucks.
  • 【Diesel Full System Diagnostic Tool】HD430 has excellent diagnostic performance, quickly scanning truck systems, detecting truck faults, while supporting the engine, ABSeBay, transmission, fuel system and more. Read the fault code and DTC Lookup help you understand the cause of the fault, quickly clear the fault code after maintenance, so provide you with good maintenance assistance and convenience. HD430 heavy duty truck scanner will provide efficient, fast scanning of your truck system.
  • 【Enhanced Diesel & Gasoline Scanner】HD430 has full HD OBD/EOBD/OBDII functions and supports heavy duty trucks with CumminseBay, CaterpillareBay, Detroit and PaccareBay engines. In addition to read & clear fault codes, view live data, ECUs, vehicle information, it also supports functions such as freeze frame, I/M readiness, on-board monitor test, etc. At the same time, the built-in DTC Lookup can help you quickly query and understand the specific definition of the fault code & solve the problem, providing strong support & convenience for your vehicle maintenance.
  • 【Advanced Hardware & Design】4.3-inch screen, 8G memory, 8G TF, 2.4G Wifi & other hardware, your truck repair process will be more stable. Wifi Lifetime Free Update, you can always keep up with the latest diagnostic functions and optimized performance of HD430, compared with others, you can avoid expensive update subscription fees. The imperial conversion to meet your needs for the use of the unit of measurement. Unique horizontal screen button design, your operation will be more comfortable and convenient.
SaleBestseller No. 4
LAUNCH X431 PRO3S+Smartlink HD Heavy Duty Truck Scanner,2025 Top Diesel&Gasoline Bidirectional Diagnostic Scan Tool with J2534 Coding,Topology Map,60+Service,ECU Coding,CANFD &DOIP,Free Update
  • 【2025 NEWEST LAUNCH 1st Advanced Scan Tool Compatible With 12V&24V Vehicles】Design for Passenger&Commercial Vehicles 2 in1,work for Cars/Trucks/buses/trailers/excavators/diesel engine/pick-up/etc.
  • J2534 Reprogramming with Smartlink C】Advanced OEM J2534 reprogramming,Helps access direct data online, replace existing software/firmware in ECU,program new ECUs and fix software-controlled issue.
  • 【Over 60 Service Reset Functions + Bi-Directional + ECU Coding 】This scan tool can support ECU Coding,60+ reset service functions like SAS/EPB/TPMS/DPF/Oil/Brake/ABSeBay Bleed, Injector coding, etc.
  • 【2025 BEST Advanced Hardware & All Systems Diagnosis+Topology Display 】Support All systems Diagnostic including ENG, AT, ECM, TCM, ABSeBay, SRS, BCM, BMS, TPMS, SAS, Fuel System, Light System and more.
  • 【Wider Vehicle Coverage of 12V & 24V Vehicles + 25 Languages】LAUNCH X431 PRO3S+SMARTLINK HD automotive scanner is ALL-IN-ONE Scan Tool for 12V cars and 24V Heavy-duty trucks support CANFD & DOIP.
Bestseller No. 5
ANCEL X7HD 10'' Heavy Duty Truck Scanner, Semi Trucks Full System Diagnostic Tool, Bidirectional Diesel Scan Tool with DPF, ECU Coding, 40+ Reset for Cummins, Detroit, Caterpillar, Volvo, Paccar etc
  • 🔥🔥🔥2025 New Functions Making X7 HD the Top Dog - Big Surprise!!! ANCEL X7 HD truck scanner 10 major functional advantages .✅>Full HDOBD/OBD2 Function ✅>ALL System Diagnostic ✅>42+ Reset Function ✅>Active Test / Bi-Directional Control✅>ECU Coding✅>Graphing Live Data✅>Wide Compatibility ✅>2 Yrs Free Update✅>Remote Operation✅>Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: ✅>6000 mAh✅>10.1 inch Tablet✅>2G RAM✅>32G ROM (Expandable to 128GB)✅>Data Record & Replay & Print✅>Android 10.0✅>Bluetooth 5.0 & Wifi✅>14 Languages
  • 🚛OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7 HD diesel scanner diagnostic tool not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABSeBay Automatically. Moreover, it features TPMS activation, cylinder cut-off and learning functions.
  • 🚛Advanced ECU Coding & Programming - ANCEL X7 HD 10.1inch truck scanner diagnostic tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility.
  • 🚛42+ Reset Functions & Bidirectional Control - 2025 newest top heavy duty truck scan tool, comes with 42+ special services (ECU, Speed Limit and Idle Reset, Oil Reset, Injector Coding, EPB, ABSeBay, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance. Please send your VIN# to our 💌 amazon@anceltech.com 💌 to check compatibility.
  • 🚛10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7 HD diesel truck scan tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABSeBay, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc.
Bestseller No. 6
FOXWELL HD500 Heavy Duty Truck Scanner with DPF Regen/Injector Cutoff/Limit Setting, Full System Diesel Diagnostic Scan Tool for Cummins, Detroit, Caterpillar, Paccar, Hino & More Pickup Semi Trucks
  • 【Diesel Engines】HD500 heavy duty truck scanner is tailored to vehicles equipped with cumminseBay, cat, detroit, paccareBay, internationaleBay, hino and more engines. This diesel scan tool come with diverse adapters, including diesel 6 & 9 pin, CAT-9 pin, CAT-14 pin, 16 pin cable. It is engineered to deliver accurate and reliable diagnostics, ensuring compatibility and effective troubleshooting for your trucks. Tip: If your truck fault code is factory custom protocol, please enter the diagnostic menu, and then select the corresponding engine to test, so that your test data will be more accurate.(Please note that the HD500 does not have bidirectional and VGT calibration.)
  • 【Advanced DPF Management】The longer a truck is in use, the more particles accumulate in the D.P.F and the more the D.P.F becomes clogged, affecting engine performance and emissions efficiency. This HD500 diesel scanner provides you with DPF regeneration, D.P.F reset, DPD, DPR status control and more functions to achieve efficient cleaning, optimise engine performance and prolong D.P.F life. Save maintenance costs by avoiding D.P.F replacement through regular D.P.F cleaning and D.P.F regeneration. All made easy with the HD500. Warm tips: the HD500 can't do dpf function on IsuzueBay.
  • 【Cylinder Cut-off Services】The cylinder cut-off test can diagnose engine failure problems. The HD500 heavy duty truck code reader sends a command to the ECU to cut off the injector of a cylinder to check if the injector of that cylinder is not working properly. If the engine speed drops more, the better the cylinder works; if the speed drop is not obvious or does not drop then the cylinder may be faulty; touch the high-pressure pipe between the common rail tube to the injector with your hand, the stronger the pulsation, the better the injection effect. This diesel scan tool provides clear guidance for maintenance.
  • 【Speed Limit Reset & ABSeBay】Limit setting enables you can check and set the engine speed and the vehicle road speed limit when the vehicle is stationary, which ensures driving safety. And this scanner for truck also can make you achieve a firm brake pedal by removing air from the ABSeBay module. HD500 truck scanner helps you maintain commercial vehicle breakdowns at all times, saving you money efficiently and winning more business for you! Please note that the adjust the speed limit is supported by fewer vehicles (eg: the cumminseBay engine cannot support speed limit adjust), please confirm the vehicke VIN with us before purchase.
  • 【Access All Major Systems with Ease】The HD500 heavy duty scanner truck diesel provides full diagnostic capabilities, covering the engine, ABSeBay, SRS, EPB, Park Brake Controller, DPF, etc. Comes with full HD OBD/EOBD/ OBD2 service modes, including read codes, erase codes, live data, etc. Allows you to quickly identify issues and perform necessary solutions.
Bestseller No. 7
LAUNCH CRP129 HD Heavy Duty Truck Scanner, DPF Regen, Full System Diesel Semi Truck Diagnostic Scan Tool, Speed Limit Adjust 7+ Reset Service Commercial Code Reader for Cummins Detroit International
  • 🚜【2025 Top-level Diagnostic Tool, Ideal for Commercial Vehicles】 LAUNCH 129HD heavy duty truck scanner is supports more than 50+ vehicle models, such as light/heavy truck, pickup, buses, trailer, tractor, dumper, agricultural and construction vehicles. It delivers such as DPF regen, speed limit adjustment. 129HD also includes 7+ special services, full system functions, EOBD/HDOBD/OBD2 functions, graphing live data, data screenshot/feedback/Email, 2 year free-update and 24/7 customer service.
  • 🚚【7+ Special Service Cover 99% Commercial Vehicles】 LAUNCH 129HD diesel truck obd2 scanner is designed for commercial vehicles, it contain 7+ special service for mechanics to do daily auto maintenance in workshops, such as DPF Regen, Oil Reset, Speed Limit Adjustment, ABSeBay bleeding, Injector Coding, Cylinder Deactivation Compression, Clutch Relearn and so on. It can help you handle faults for commercial vehicles, save your money, quickly & efficiently, and win more business!
  • 🚛【Wide Vehicle Range of Compatibility】 LAUNCH 129HD semi truck scanner diagnostic tool is designed to work with OBD2/CAN, J1587, J1708 and J1939 compatible vehicles. It support 99% commercial vehicles and 300+ vehicle models. It fit for CumminseBay, CaterpillareBay, Detroit, InternationaleBay, PaccareBay, VolvoeBay, FreightlinereBay, KenwortheBay, IsuzueBay, Hino, Western StareBay, Sterling, PeterbilteBay, Maxxforce, PeterbilteBay, Maxxforce, Scania, Man, DAF, Mercedes-BenzeBay, USAFORD,Aisin, Allison, Case, Credo, Deutz and so on.
  • 🚌【OE-Level Full System Diagnostic &Remote Diagnose】 LAUNCH 129HD heavy truck scanner offers full system functions to make the comprehensive diagnostic. It works on Engine, ABS, SRS, SAS, Transmission, TPMS, ESP, EPB, Brake, Park Brake Controller, DPF, Immobilizer, etc, allows you to quickly and comprehensively identify fault problems. You can send the diagnostic report and feedback to remote system or service center, enabling real-time monitoring of multiple vehicles and proactive maintenance scheduling.
  • 🚎【Adcanced DPF Regeneration & Speed Limited Adjust Function】 The DPF function of 129HD integrates monitoring, control, analysis and fault diagnosis capabilities to ensure that the DPF system can operate effectively under various operating condition. It applied to 50+ engine models such as CumminseBay CaterpillareBay Detroit InternationaleBay PaccareBay VolvoeBay PeterbilteBay . Remote diagnose will transmittethe diagnostic report/feedback to a remote system or service center, which will offer a professional suggestion for your vehicles.
Bestseller No. 8
NEXAS NL102 Plus Full Systems Heavy Duty Truck Scan Tool Force DPF Regen Tool HDOBD/EOBD Diagnostic Scanner with Oil Reset Sensor Calibration Truck & Car 2 in 1 Code Reader (Elite Version)
  • Please Note: For official version, please recognize the store name: Maxcicoo. 1. The HD OBD option is available for heavy truck owners and the OBD/EOBD option is available for other vehicle. 2. Owners need to fix the problem with the truck first before they need clear the error code. You can contact us at any time if you have any questions, we will solve the problem for you in time.
  • Support Full Systems for Heavy Duty Truck - NL102 Plus car code reader supports read and clear DTC, live data, ECU information for truck all systems. Including Engine, Transmission, Drivetrain, Suspension, ABS, ESP, Cluster, E-xhaust, P-articular, Suspension, Braking System, Cab Climate, Body Control, Instrument Panel, Fuel System and more, which are in compliance with J1939, J1708 and J1587 protocols, it includes almost American HD trucks(Class4-Class8), it is recommended that customers confirm before purchase that if they comply with the years and agreements supported by NL102P obd2 reader before purchasing.
  • Professional DPF Regeneration Tool - Force DPF Regen work on CumminseBay, Detroit, Maxxforce, ISUZU, HINO engine, it covers almost all US trucks, supported advanced features: DPF Regeneration, D-O-C Cleaning Procedures, DPF Regeneration in Parking, DPF Regeneration in Driving, DPF Onboard. NL102P scan tool helps you re-awaken the engine power when the diesel p-articulates of the engine accumulate. It will save $800-$2500 for truck owners a year.
  • Excellent Oil Light Reset - NL102 Plus diagnostic tool support Oil service reset work on CumminseBay, Detroit, Maxxforce engine. when the replacement of engine oil is done, the truck system calculates when to change the engine oil and filter based on vehicle use. An oil change is required whenever indicated by the display, otherwise it will affect the engine maintenance and life. The NL102P truck scanner offers help to reset the Oil Life Reminder (Determine the Oil Service Light), ensure your driving safety.
  • All OBD/EOBD Diagnosis - NL102 Plus supports both all 12V and all 24V truck, and it comes with 6 pin, 9 pin and 16 pin adapters for different interfaces. NL102 Plus can read and clear the trouble codes, determine the MIL (check your Truck engine) and I/M Readiness, Freeze Frame, Live Data, O-xygen Sensor Test, On-Board Monitor, Vehicle Identification Info. Built in a DTC lookup library you can find the related code definition to help you determine if your car needs repair. In order to ensure that you can use the NL102P, please check the manual before purchasing.
SaleBestseller No. 9
Heavy Duty Truck Scanner,Full System Diesel Diagnostic Scan Tool and Code Reader for Cummings, Detroit,Freightliner,International,Paccar,Check Truck Engine and Car 2 in 1 Code Reader/OBD2 Scanner
  • 【2025 Newest OBD2 Scanner Diagnostic Tool】The NC601 is a cutting-edge OBD2 scanner for vehicles from 1996 onwards, covering cars, minivans, and light trucks. It supports multiple protocols, including J1850, ISO_9141-2, ISO_14230-4, and ISO_15765-4. This scanner checks engine diagnostics, determines check engine light causes, reads/erases trouble codes, and offers battery tests, smoke tests, fuel tests, and access to a trouble code library with over 50,000 entries. Compatible with OBDII 16-pin and 9-pin connectors (gasoline and diesel), it suits Cummins, Caterpillar, Detroit, Packard, and other diesel engines.
  • 【 Full System Diagnostic】The NC601 OBD2 scanner is ideal for most OBDII-compliant vehicles updated after 1996. This lightweight, easy-to-carry tool offers simple operation and fast diagnosis. It covers real-time data, freeze frame, DTC reading/clearing, oxygen sensor tests, on-board testing, smog checks, I/M readiness, EVAP tests, vehicle information, MIL status, battery tests, fuel analysis, data monitoring, DTC queries, data playback/recording, and settings. As a new OBDII diagnostic tool, it allows deep system analysis and DIY repairs, saving time and money.
  • 【Comprehensive Vehicle Coverage & Engine Diagnostic Capabilities】NC601 OBD2 scanner is suitable for most OBDII-compliant vehicles updated after 1996 (OBDII protocol//16-pin diagnostic interface: J1850 (PWM, VPW), ISO_9141-2, ISO_14230-4 (KWP , KWP-5BPS), ISO_15765-4 (CAN, CAN-B, CAN-C, CAN-D)) Compatible vehicles - cars, light trucks, pickups, SUVs, etc. This product Easy to carry, simple to operate, fast diagnosis, large memory, comprehensive code base, powerful performance and novel design for car owners.
  • 【Enhanced Diesel OBD Scanner】The NC601 Diesel OBD Scanner excels in heavy-duty truck diagnostics. It reads/clears codes, displays live data, retrieves vehicle information, freeze frames, and DTCs. With 9-pin and 16-pin cables, it ensures compatibility with various engines. This scanner comprehensively supports heavy-duty truck engines, making it indispensable for truck diagnostics. It works with all OBD II compliant vehicles, including those with next-generation Control Area Network (CAN) protocols.
  • 【DTC Library+Life Time Free Update】The NC601 scanner features a built-in DTC library, allowing direct code retrieval without consulting books. Suitable for professionals and DIYers, this diesel scanner explains problems, simplifies code understanding, and speeds up repairs. Lifetime free updates ensure the latest diagnostic software, keeping the tool current with vehicle technologies and protocols.
SaleBestseller No. 10
NEXAS Heavy Duty Truck Scanner NL102+ Full System Truck Diesel Scan Tool for Cummins, Caterpillar, Detroit, International, PACCAR, etc, 2-in-1 Code Reader Support All OBD2 Modes for Truck & Car
  • Why NEXAS NL102 Truck Scan Tool? The NL102 outshines other truck scanner with its extensive diagnostic features. It offers full system diagnostics for major trucks meeting standard protocols, along with complete OBD2 functionality. Beyond read fault codes, clear codes and live data display, it enables vehicle info retrieval, freeze frame capture, and DTC lookup. Equipped with 6-pin, 9-pin, 16-pin connectors, it ensures broad truck compatibility. Plus, enjoy lifetime free updates in English, Spanish, and French, keeping your diagnostic scanner software current.
  • Wide Compatibility - This heavy duty truck diagnostic scanner is compatible with all heavy-duty trucks that adhere to standard protocols (J1587, J1939, J1708). It covers a wide range of vehicle models, including Cummins, Detroit, Caterpillar, Freightliner, International, Kenworth, John Deere, Peterbilt, Sterling, Mack, Paccar, Western Star, MercedeseBay-Benz, VolvoeBay, Scania, MAN, Renault, ERF, Foden, Seddon-Atkinson, Iveco, DAF, SISU, STEYR, and ISUZU. Additionally, it supports 10 modes of OBD testing for complete diagnostics and battery voltage monitoring on passenger cars and light vehicles (from Europe, America, and Asia) manufactured after 1996.
  • Save Up to Hundreds Money for All Heavy Duty Trucks - The diesel scan tool supports accurate full system scanning for all heavy-duty trucks that comply with standard protocols (J1587, J1939, and J1708). This includes vehicle systems such as the engine, transmission, instrument panel, drivetrain, brake system, suspension, ABS, ESP, EPS, fuel system, etc. The diagnostic scan tool communicates with the vehicle's computer to retrieve data stream information, allowing it to accurately pinpoint issues. This reduces the waste caused by blind part replacements, saving your time and hundreds or thousands of money.
  • All OBD2 Function & Battery Health Monitoring - Compared with other products on the market that only support partial OBD2 functions, this OBD2 scanner supports all OBD2 functions: read/clear codes, live data, freeze frame data, I/M readiness, EVAP test, on-board monitor, O2 sensor test, vehicle information, and DTC lookup, this providing more analysis basis for professional technicians. By regularly detecting the status of the vehicle battery with NL102+ OBD scan tool, it helps to take measures before the battery completely fails to avoid the situation that the vehicle suddenly fails to start. It can accurately diagnose the battery's condition thus saving on repair costs.
  • Plug and Play & One-click for DTC: NEXAS diesel scanner is user-friendly. It comes with an intuitive screen and easy-to-understand interface, making it accessible even for non-professionals to get started. And the built-in DTC library in the code reader allows you to directly retrieve codes without searching for definitions in books, making it easier to understand the code definitions and solve problems more quickly.

 


 

Last update on 2025-05-13 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...