NHTSA Campaign Number: 18V359
Manufacturer PACCAR
Incorporated
Components POWER TRAIN
Potential Number of Units Affected 36
Rear Hub Axle Nut may be Over Tightened
Bearing failure can cause wheel separation, increasing the risk of crash.
Summary
PACCAR Incorporated (PACCAR) is recalling certain 2019 Kenworth T270 and T370 vehicles. The rear hub axle nut on these vehicles may have been over tightened, possibly causing bearing failure or a fire.
Remedy
PACCAR will notify owners, and dealers will disassemble the rear hub assembly, and install new bearings and re-assemble the hub, free of charge. The recall is expected to begin June 29, 2018. Owners may contact PACCAR customer service at 1-918-259-3258. PACCAR’s number for this recall is 18KWC.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Safety Bulletin
No. 1B18KWC
6/25/2018
Recall Acknowledgement
June 26, 2018
- Contains extraordinary anti-wear and lubricity agents, ensuring exceptional protection against wear and reducing drag
- Helps to control heat
- Incorporates Lucas cutting-edge additive technology derived from top-rated Lucas Heavy Duty Oil Stabilizer, the number one supplemental oil in the heavy-duty industry
- Available in 1 quart and 1 gallon bottle sizes
- The information below is per-pack only
- Extreme pressure additives deliver outstanding high pressure performance, load carrying capacity and durability for towing and hauling
- Daily protection gear lubricant helps prevent noise and chattering, while protecting gear teeth from wearing out prematurely
- Exceptional high and low temperature protection ranges from -15F to 410F for dependable year-round coverage
- Fights rust and corrosion with corrosion inhibitors and safeguards against impurities, oxidation and thermal breakdown
- Contains extraordinary anti-wear and lubricity agents, ensuring exceptional protection against wear and reducing drag
- Helps to control heat
- Incorporates Lucas cutting-edge additive technology derived from top-rated Lucas Heavy Duty Oil Stabilizer, the number one supplemental oil in the heavy-duty industry
- Available in 1 quart and 1 gallon bottle sizes
- Extreme pressure additives deliver outstanding high pressure performance, load carrying capacity and durability for towing and hauling
- Daily protection gear lubricant helps prevent noise and chattering, while protecting gear teeth from wearing out prematurely
- Exceptional high and low temperature protection ranges from -15F to 410F for dependable year-round coverage
- Fights rust and corrosion with corrosion inhibitors and safeguards against impurities, oxidation and thermal breakdown
- Meets or exceeds API Services GL-5 and non-synchronized manual transmissions calling for GL-4
- FlexFill squeezable pouch releases 2X more fluid with less effort for 3X faster filling vs. traditional bottle packaging
- Contains limited slip for optimal performance of the clutch pack, while also delivering 30% better protection against towing and heavy loads and 1.5X better gear wear protection
- Advanced full synthetic helps prevent noise and reduce chattering, while protecting gear teeth from wearing out prematurely
- High and low temperature protection ranges from -50F to 300F degrees for cold temperature fluidity and high temperature performance
- Fights rust and corrosion with corrosion inhibitors and safeguards against impurities, oxidation and thermal breakdown
This product presentation was made with AAWP plugin.