โThis site contains affiliate links for which OEMDTC may be compensatedโ |
January 23, 2023 NHTSA CAMPAIGN NUMBER: 23V018000
An inaccurate fuel gauge may result in the vehicle unexpectedly running out of fuel and stalling, increasing the risk of a crash.
NHTSA Campaign Number: 23V018
Manufacturer Autocar, LLC
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 206
Summary
Autocar, LLC (Autocar) is recalling certain 2021-2023 Xpeditor vehicles that run on natural gas. A software error in the instrument cluster may cause an inaccurate fuel gauge reading.
Remedy
Dealers will update the instrument cluster software, free of charge. Owner notification letters were mailed March 22, 2023. Owners may contact Autocar customer service at 1-888-218-3611. Autocar’s number for this recall is ACX-2301.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
SAFETY RECALL BULLETIN
NHTSA RECALL 23V018
AUTOCAR, LLC SAFETY RECALL ACX-2301
February 2023
ATTENTION:
Service Managers / Parts Managers.
SUBJECT:
Autocar, LLC has determined that a programming error during manufacturing may allow the fuel gauge to display 50% constant.
SAFETY RECALL INFORMATION:
This document provides information regarding reprogramming of the instrumentation.
VEHICLES AFFECTED:
There are 206, 2021-2023 model year ACX (Xpeditor) vehicles manufactured between January
5, 2021, and September 19, 2022, with non-sequential serial numbers between 223088 and 241053. To determine if a vehicle is affected by this Recall, log in to the Autocar Warranty Management System at www.autocartruck.com. From the main menu, select โView Recalls/ Service Programsโ and look for the Autocar Recall number above. A spreadsheet file will be accessible with the VIN list of affected vehicles. Alternatively, to determine if a single vehicle is affected, select โVIN Profileโ from the main menu in the Autocar Warranty Management System. In the โChassis Numberโ field, enter the last 6 of the VIN. Once the VIN profile is displayed, scroll down to the โRecall/Service Program Informationโ section to determine if the Recall is open.
SERVICE RESPONSIBILITY:
Service sites must perform this Recall on affected vehicles at no charge to the owner regardless of vehicle mileage, age, or ownership. If a vehicle affected by this Recall is taken into or is currently in your vehicle inventory, or at your center for service, you must perform this Recall before the vehicle is sold or released to the owner.
LOCKOUT/TAGOUT PROCEDURES:
Before entering the vehicle or vehicle body, read and follow OSHA regulations concerning entry and working in โCONFINED SPACEโ OSHA 1910.146 and โLOCKOUT/TAGOUTโ OSHA 1910.147. Follow OSHA regulations while performing any work on the vehicle. The vehicle must be disabled by the following steps before performing any work on the vehicle:
1. Place the transmission in NEUTRAL.
2. Set the parking brake.
3. Shut the engine OFF.
4. Lock cab doors, keep the key in your pocket. Block the wheels before entering the body or performing any work on the vehicle.
5. Turn the battery disconnect switch OFF, if equipped.
6. Completely drain the air from the primary/A system and secondary/B system by opening the drain valves on the air tanks themselves or by using the drain manifold if supplied. When draining the air tanks, do not look into the area where air is draining. Dirt or sludge particles may be expelled in the air stream and can cause eye injury.
7. Place magnetic โDANGERโ signs on both cab doors before entering the body or performing any work on the vehicle.
8. Take proper precautions before working under the vehicle. Use ramps approved for the weight of your vehicle, or use floor jacks and stands. Never work under a vehicle supported by jacks alone. Always use jack stands to support the vehicle.
REPROGRAMMING INSTRUCTIONS FOR THE CNG FUEL GAUGE FUNCTION
1. Unlock and open both doors.
2. Log in to the Autocar Warranty Management System at www.autocartruck.com. From the main menu, select โView Recalls/Service Programsโ and locate โ2021 IFM & Display Programming SB 3-147-003.โ Complete the update instructions as required.
3. Reprogramming is complete.
Note: If you have questions or concerns regarding this Recall Bulletin, please contact Autocar Technical Support at 888-218-3611.
Chronology :
November 4, 2022, Autocar personnel identified an error regarding the fuel level and began investigating.
November 11, 2022, A new programming version was developed, and the release initiated to address the fuel level error.
November through December 2022 Internal development and validation continued.
January 13, 2023, all relevant information was presented to Autocar’s management team and out of an abundance of caution, Autocar decided to perform a voluntary safety recall.
3 Affected Products
Vehicle
MAKE | MODEL | YEAR |
AUTOCAR | XPEDITOR | 2021-2023 |
11 Associated Documents
Defect Notice 573 Report
RCLRPT-23V018-1056.PDF 215.087KB
Recall Acknowledgement
Safety Bulletin
RCSB-23V018-8101.pdf 302.859KB
Remedy Instructions and TSB
RCRIT-23V018-3595.pdf 302.859KB
Manufacturer Notices(to Dealers,etc)
RCMN-23V018-5746.pdf 105.753KB
Manufacturer Reimbursement Plan
ISSUED Owner Notification Letter(Part 577)
RCONL-23V018-5455.pdf 143.275KB
Recall 573 Report-Amendment 1 – 04/11/2023
RCLRPT-23V018-1975.PDF 215.134KB
Recall Quarterly Report #1, 2023-1
RCLQRT-23V018-7911.PDF 211.122KB
Recall Quarterly Report #2, 2023-2
RCLQRT-23V018-4129.PDF 211.22KB
Recall Quarterly Report #3, 2023-3
RCLQRT-23V018-9194.PDF 211.445KB
Latest Recalls Documents
Heavy Duty Truck Reprogramming
Description:
Designed for flexibility, the USB-Link 3 Wired Edition connects to your PC, tablet, or smartphone with a USB cable, allowing techs to directly connect to a device when working in the field or during signal interruptions.
Built to support the latest protocols (CAN FD, DoIP) and compatible with a wide range of OEM diagnostics software, the USB-Link 3 is our most advanced VCI to date, with the performance and technology you can rely on well into the future.
The USB-Linkโข 3 comes with the following:
- Latching USB Cable (PN 404032)
- 9-Pin Deutsch Adapter, 1 Meter (PN 493128)
- J1962 Adapter (16-Pin OBD II, 1 Meter (PN 491113)
The USB-Linkโข 3: Wireless is also available (PN 121052).
Specifications
Vehicle Network Protocol Support
CAN FD / J1939 FD / ISO15765 FD - 250K, 500K, 1M b/s with auto baud detection
Single wire CAN (SWCAN)
ISO 11898-3 Fault Tolerant CAN (FTCAN)
Diagnostics Over Internet Protocol (DoIP)
J1708
J1850 VPW (Class 2)
ISO PWM (SCP)
ISO 9141 / KWP2000 (ISO 14230) K/L line
ALDL 9600 and 8192 baud
ATEC 160 baud
Windowsยฎ Vehicle Communication API
Windowsยฎ Vehicle Communication API
RP1210 a/b/c
J2534 (2004 draft)
J2534-1 partial implementation (commercial vehicle focused)
Operating System Compatibility
iOS
Androidโข
Windowsยฎ 10, 11
Interfaces to Computing Platforms
USB 2.0 (vehicle-to-PC connectivity)
Bluetoothยฎ 2.1 + EDR
Wi-Fi (dual band)
Compatible Software
Detroit Diesel Diagnostic Link
CAT Electronic Technician (On-Highway only)
Cummins Insite
International - ServiceMAXX Fleet Pro
Hino eXplorer
Volvo PTT
VCAD Elite Mack/Volvo
V-MAC Service Tools
Allison DOCยฎ For PC-Service Tool - Protocols Supported: J1939, J1708/J1587, and J1850
Allison DOCยฎ For Fleets (1000/2000) - Protocols Supported: J1939, J1850
Allison DOCยฎ For Fleets (3000/4000) - Protocols Supported: J1939, J1708/J1587
Eaton ServiceRanger
Bendix ACom
WABCO Toolbox
Freightliner ServiceLink
International ABS
International DLB
International Intune
International IPC v2.02
PACCAR DAVIE4
![]() |
Diesel Laptops Nexiq USB Link 3 Wireless Edition with Repair Information & Diagnostic Software |
![]() |
Diesel Laptops Nexiq USB Link 3 Wired Edition with Repair Information & Diagnostic Software |
Nexiq Blue-Link Mini Product Numberย NQ126015 Nexiq Blue Link Miniโข Vehicle Communication Interface |
![]() |
NEXIQ Technologies 124032 USB-Link 2 Connector |
![]() |
Dearborn DPA5 Pro Universal RP1210 Protocol Adapter |
Daimler Truck
DiagnosticLink Order Site:
DiagnosticLink Direct Link:
https://diagnosticlink.nexiq.com/DTNA/Default.aspx
- ใExtensive CompatibilityใAfter the upgrade, the compatibility is wider and more accurate! HD601 heavy duty truck scanner supports all major truck models that comply with standard protocols (SAE J1939, SAE J1708, ISO 14230-4, ISO 15764-4 and ISO 9141-2, ISO 27145-4 and Euro6). Fits for Cummins
, Paccar
, Detroit, Perkins, Freightliner
, International
, Peterbilt
, Ford
, Class 4-Class 8 trucks, etc. It also check engine diagnosis on most cars, minivans and light trucks
- ใ Full System DiagnosticใHD601 Diesel Scanner supports all system scans of heavy trucks compliant with standard protocols SAE J1939 & J1708, such as Engine, ABS
, Transmission, Braking System, ESP, EPS, Fuel System, etc, It is a great scan tool fits for Cummins
, Caterpillar
, Detroit, Perkins, Maxxforce, Bendix
,Wabash
, Wabaco, Haldex
, Allison, Eaton
heavy trucks, With this truck tool, you can get deep analysis data about the system and do some repairs by yourself, saving much time and money
- ใEnhanced Diesel OBD ScannerใThe HD601 Diesel OBD Scanner offers unparalleled diagnostic capabilities for heavy-duty trucks. Beyond code reading, clearing, and live data display, it retrieves vehicle information, freeze frames, and DTCs. With 6, 9, and 16 pin cables, it ensures compatibility with various engines. This scanner's real-world testing prowess ensures comprehensive support for a wide array of heavy-duty truck engines, making it an indispensable tool for truck diagnostics
- ใDTC Libraryใ+ใLife Time Free UpdateใThe built-in DTC library allows you to retrieve the codes directly without searching for the definition in the book. Whether you are a professional mechanic or a DIY car owner, HD601 diesel scanner explains the existing problem, makes it easier for you to understand the codes definition and fix the problem faster. Plus, you get a lifetime free internet updates, so you always have the latest software for diagnostics in English and Spanish languages
- ใFriendly Design, Easy of UseใThis scanner is plug and play, simple and convenient, and very friendly for beginners. With improved buttons for easy menu navigation. The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work.
- ใDiesel EnginesใHD500 heavy duty truck scanner is tailored to vehicles equipped with cummins
, cat, detroit, paccar
, international
, hino and more engines. This diesel scan tool come with diverse adapters, including diesel 6 & 9 pin, CAT-9 pin, CAT-14 pin, 16 pin cable. It is engineered to deliver accurate and reliable diagnostics, ensuring compatibility and effective troubleshooting for your trucks. Tip: If your truck fault code is factory custom protocol, please enter the diagnostic menu, and then select the corresponding engine to test, so that your test data will be more accurate.(Please note that the HD500 does not have bidirectional and VGT calibration.)
- ใAdvanced DPF ManagementใThe longer a truck is in use, the more particles accumulate in the D.P.F and the more the D.P.F becomes clogged, affecting engine performance and emissions efficiency. This HD500 diesel scanner provides you with DPF regeneration, D.P.F reset, DPD, DPR status control and more functions to achieve efficient cleaning, optimise engine performance and prolong D.P.F life. Save maintenance costs by avoiding D.P.F replacement through regular D.P.F cleaning and D.P.F regeneration. All made easy with the HD500. Warm tips: the HD500 can't do dpf function on Isuzu
.
- ใCylinder Cut-off ServicesใThe cylinder cut-off test can diagnose engine failure problems. The HD500 heavy duty truck scan tool sends a command to the ECU to cut off the injector of a cylinder to check if the injector of that cylinder is not working properly. If the engine speed drops more, the better the cylinder works; if the speed drop is not obvious or does not drop then the cylinder may be faulty; touch the high-pressure pipe between the common rail tube to the injector with your hand, the stronger the pulsation, the better the injection effect. This diesel scan tool provides clear guidance for maintenance.
- ใSpeed Limit Reset & ABS
ใLimit setting enables you can check and set the engine speed and the vehicle road speed limit when the vehicle is stationary, which ensures driving safety. And this diesel scanner also can make you achieve a firm brake pedal by removing air from the ABS
module. HD500 truck scanner helps you maintain commercial vehicle breakdowns at all times, saving you money efficiently and winning more business for you! Please note that the adjust the speed limit is supported by fewer vehicles (eg: the cummins
engine cannot support speed limit adjust), please confirm the vehicke VIN with us before purchase.
- ใAccess All Major Systems with EaseใThe HD500 heavy duty scanner truck diesel provides full diagnostic capabilities, covering the engine, ABS
, SRS, EPB, Park Brake Controller, DPF, etc. Comes with full HD OBD/EOBD/ OBD2 service modes, including read codes, erase codes, live data, etc. Allows you to quickly identify issues and perform necessary solutions.
- ใ2025 NEWEST LAUNCH 1st Advanced Scan Tool Compatible With 12V&24V VehiclesใDesign for Passenger&Commercial Vehicles 2 in1,work for Cars/Trucks/buses/trailers/excavators/diesel engine/pick-up/etc.
- ใJ2534 Reprogramming with Smartlink CใAdvanced OEM J2534 reprogramming,Helps access direct data online, replace existing software/firmware in ECU,program new ECUs and fix software-controlled issue.
- ใOver 60 Service Reset Functions + Bi-Directional + ECU Coding ใThis scan tool can support ECU Coding,60+ reset service functions like SAS/EPB/TPMS/DPF/Oil/Brake/ABS
Bleed, Injector coding, etc.
- ใ2025 BEST Advanced Hardware & All Systems Diagnosis+Topology Display ใSupport All systems Diagnostic including ENG, AT, ECM, TCM, ABS
, SRS, BCM, BMS, TPMS, SAS, Fuel System, Light System and more.
- ใWider Vehicle Coverage of 12V & 24V Vehicles + 25 LanguagesใLAUNCH X431 PRO3S+SMARTLINK HD automotive scanner is ALL-IN-ONE Scan Tool for 12V cars and 24V Heavy-duty trucks support CANFD & DOIP.
- ๐ฅ๐ฅ๐ฅ2025 New Functions Making X7 HD the Top Dog - Big Surprise!!! ANCEL X7 HD truck scanner 10 major functional advantages .โ >Full HDOBD/OBD2 Function โ >ALL System Diagnostic โ >42+ Reset Function โ >Active Test / Bi-Directional Controlโ >ECU Codingโ >Graphing Live Dataโ >Wide Compatibility โ >2 Yrs Free Updateโ >Remote Operationโ >Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: โ >6000 mAhโ >10.1 inch Tabletโ >2G RAMโ >32G ROM (Expandable to 128GB)โ >Data Record & Replay & Printโ >Android 10.0โ >Bluetooth 5.0 & Wifiโ >14 Languages
- ๐OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7 HD diesel scanner diagnostic tool not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABS
Automatically. Moreover, it features TPMS activation, cylinder cut-off and learning functions.
- ๐Advanced ECU Coding & Programming - ANCEL X7 HD 10.1inch truck scanner diagnostic tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility.
- ๐42+ Reset Functions & Bidirectional Control - 2025 newest top heavy duty truck scan tool, comes with 42+ special services (ECU, Speed Limit and Idle Reset, Oil Reset, Injector Coding, EPB, ABS
, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance. Please send your VIN# to our ๐ amazon@anceltech.com ๐ to check compatibility.
- ๐10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7 HD diesel truck scan tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABS
, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc.
- WHY NEXAS NL102+ Diagnostic Tool: Compared with many other heavy duty truck scanner, NL102+ diagnostic tool has more comprehensive diagnostic capabilities, supporting all system diagnostics for all major trucks that comply with standard protocols and full OBD2 functionality. In addition to read/clear codes, displaying live data, it also supports retrieving vehicle information, freezing frames, and DTC lookup. NL102+ OBD2 scanner comes with 6-pin, 9-pin, 16-pin connectors are available to ensure compatibility with a wide range of trucks. You'll get f-ree updates for life, so you always have the latest diagnostic software in English, Spanish and French
- Wide Compatibility: The NEXAS NL102+ heavy duty truck diagnostic scanner is compatible with all heavy-duty trucks that adhere to standard protocols (J1587, J1939, J1708). It covers a wide range of vehicle models, including Cummins
, Detroit, Caterpillar
, Freightliner
, International
, Kenworth
, John Deere, Peterbilt
, Sterling, Mack
, Paccar
, Western Star
, Mercedes-Benz
, Volvo
, Scania, MAN, Renault, ERF, Foden, Seddon-Atkinson, Iveco, DAF, SISU, STEYR, and ISUZU
. Additionally, it supports 10 modes of OBD testing for complete diagnostics and battery voltage monitoring on passenger cars and light vehicles (from Europe, America, and Asia) manufactured after 1996
- Save Up to Hundreds Money for All Heavy Duty Trucks: NEXAS NL102+ diesel scan tool supports accurate full system scanning for all heavy-duty trucks that comply with standard protocols (J1587, J1939, and J1708). This includes vehicle systems such as the engine, transmission, instrument panel, drivetrain, brake system, suspension, ABS, ESP, EPS, fuel system, etc. The diagnostic scan tool communicates with the vehicle's computer to retrieve data stream information, allowing it to accurately pinpoint issues. This reduces the waste caused by blind part replacements, saving your time and hundreds or thousands of money
- All OBD2 Function & Battery Health Monitoring: Compared with other products on the market that only support partial OBD2 functions, this OBD2 scanner supports all OBD2 functions: read/clear codes, live data, freeze frame data, I/M readiness, EVAP test, on-board monitor, O2 sensor test, vehicle information, and DTC lookup, this providing more analysis basis for professional technicians. By regularly detecting the status of the vehicle battery with NL102+ OBD scan tool, it helps to take measures before the battery completely fails to avoid the situation that the vehicle suddenly fails to start. It can accurately diagnose the battery's condition thus saving on repair costs
- Plug and Play & One-click for DTC: NEXAS NL102+ diesel scanner is user-friendly. It comes with an intuitive screen and easy-to-understand interface, making it accessible even for non-professionals to get started. And the built-in DTC library in the code reader allows you to directly retrieve codes without searching for definitions in books, making it easier to understand the code definitions and solve problems more quickly
- ใWide CompatibilityใHD430 supports 12V 24V trucks, equipped with diesel connectors (CAT-9, Diesel 6pin & 9pin) and OBDII 16pin, with strong truck adaptation and compatibility. Product supports SAE J1939, SAE J1708, SAE J1850 PWM, SAE J1850 VPW, ISO 14230-4, ISO 9141-2, ISO 15765-4, ISO 27145-4 truck protocols, provides complete scan & fast scan, and available in English and Spanish, it is suitable for DIY enthusiasts, old-school mechanics, truck owners or small repair shops.
- ใ D.P.F Regen For Cunmmis & Caterpillar
ใHD430 supports Cummins
and Caterpillar
engines for D.P.F reset & regeneration, helping to remove diesel particles from truck D.P.F & meet maintenance schedules, thereby avoiding fault codes, maintaining engine performance, and extending DPF & truck life. Even if you aren't a professional mechanic, you can easily perform D.P.F regen using HD430 according to clear instructions, which can help your truck avoid roadside obstacles while reducing your repair time & cost.โโโNote: Not compatible with pickups/light trucks.
- ใDiesel Full System Diagnostic ToolใHD430 has excellent diagnostic performance, quickly scanning truck systems, detecting truck faults, while supporting the engine, ABS, transmission, fuel system and more. Read the fault code and DTC Lookup help you understand the cause of the fault, quickly clear the fault code after maintenance, so provide you with good maintenance assistance and convenience. HD430 heavy duty truck scanner will provide efficient, fast scanning of your truck system.
- ใEnhanced Diesel & Gasoline ScannerใHD430 has full HD OBD/EOBD/OBDII functions and supports heavy duty trucks with Cummins, Caterpillar
, Detroit and Paccar engines. In addition to read & clear fault codes, view live data, ECUs, vehicle information, it also supports functions such as freeze frame, I/M readiness, on-board monitor test, etc. At the same time, the built-in DTC Lookup can help you quickly query and understand the specific definition of the fault code & solve the problem, providing strong support & convenience for your vehicle maintenance.
- ใAdvanced Hardware & Designใ4.3-inch screen, 8G memory, 8G TF, 2.4G Wifi & other hardware, your truck repair process will be more stable. Wifi Lifetime Free Update, you can always keep up with the latest diagnostic functions and optimized performance of HD430, compared with others, you can avoid expensive update subscription fees. The imperial conversion to meet your needs for the use of the unit of measurement. Unique horizontal screen button design, your operation will be more comfortable and convenient.
SEOCONTENT-START
4680 Pinson Valley Parkway, Birmingham, AL 35215 Office: 205.920.2499 Fax: 205.341.0375
General Recall Reimbursement Plan
I. Introduction
Pursuant to 49 U.S.C. 30120(d), 49 C.F.R. Parts 573 and 577, and other applicable requirements, Autocar,
LLC and Autocar Industries, LLC (collectively โAutocarโ) hereby provides the National Highway Traffic
Safety Administration (โNHTSAโ) its general reimbursement plan for the cost of remedies paid for by
vehicle owners before they are notified of a related safety recall.
As set forth at 49 C.F.R. 573.6(c)(8)(i) and 49 C.F.R 573.13, the following information sets forth Autocarโs
general plan to reimburse owners and purchasers for costs incurred for remedies in advance of notification
of potential safety-related defects or noncompliance.
II. Reimbursement Notification
Autocarโs notice to a vehicle owner in accordance with 49 C.F.R. Part 577 will indicate whether Autocar
is offering a refund. A vehicle owner will be eligible for reimbursement if the owner paid to have service
to remedy the defect or noncompliance prior to a specified ending date.
As set forth at 49 C.F.R 573.13(c)(2), the ending date shall be 10 calendar days after the date on which
Autocar mailed the last of its Part 577 notifications to owners in the United States, unless a specific
reimbursement plan is made available for a particular recall.
Autocarโs notice will instruct owners to seek eligible reimbursement through Autocarโs Service &
Warranties Department, at the following address or otherwise applicable business address:
Autocar LLC
Service & Warranties Department
551 S. Washington Street
Hagerstown, Indiana 47346
Owners will also be instructed that they may contact Autocar by telephone (toll free) at 888-218-3611 or
877-973-3486
NHTSAโs regulations (see 49 C.F.R. 573.13(c)) permit Autocar to identify a beginning date for
reimbursement eligibility. Accordingly, an owner who paid to remedy the defect or noncompliance prior to
the identified beginning date would not be eligible for reimbursement. Autocar puts its owners and
customers first, and therefore, the company has generally has not firmly established such a beginning date
for reimbursement eligibility, and as of the date of this policy, does not presently anticipate changing this
general policy.
Should Autocar determine (as NHTSA permits) that a beginning date is appropriate, Autocar will indicate
that date in the specific reimbursement plan for that particular recall. As permitted by 49 C.F.R. 577.11(e),
Autocar may not include a reimbursement notification when all vehicles are well within the warranty
period, subject to approval by NHTSA.
4680 Pinson Valley Parkway, Birmingham, AL 35215 Office: 205.920.2499 Fax: 205.341.0375
III. Costs to be Reimbursed
For vehicles, reimbursement will not be less than the lesser of:
โข The amount paid by the owner for the remedy that specifically addressed and was reasonably
necessary to correct the defect or noncompliance that is the subject of the recall; or,
โข The costs of the part(s) for the remedy (to be no more than the manufacturerโs list retail price for
authorized part(s)), plus associated labor at local labor rates, miscellaneous fees (such as disposal
of waste), and taxes.
For replacement equipment, reimbursement will be the amount paid by the owner for each replacement
item (limited to the amount of the retail list price of each defective or noncompliant item that was replaced,
plus taxes, where the brand or model purchased by the owner was different than the brand or model that
was subject to the recall). If the item of motor vehicle equipment was repaired, the reimbursement
provisions identified above for vehicles will apply.
As set forth at 49 C.F.R. 573.13(d)(1), costs incurred by the owner within the period during which Autocarโs
original or extended warranty would have provided for a free repair of the defect or noncompliance will not
be eligible for reimbursement.
IV. Entity Authorized to Provide Reimbursement
Autocar will directly reimburse owners, unless a specific reimbursement plan is made available for a
particular recall, and will encourage owners to pursue requests for reimbursement directly through its
Service & Warranties Department to expedite reimbursement, as set forth above in Section II. In whatever
manner the request for reimbursement is made, under this Plan or a specific reimbursement plan, the owner
will be directed to submit the required documentation, upon which reimbursement eligibility will be
determined.
V. Required Documentation
The reimbursement determination will depend upon the information provided by the owner.
As set forth at 49 C.F.R. Part 573.13(d)(4), the owner must submit all of the following information:
โข Claimantโs name and mailing address;
โข For motor vehicles, the vehicle identification number (or โVINโ), vehicle make, model, and model
year;
โข For replacement equipment, a description of such equipment or, for tires, the model and size;
โข Identification of the applicable recall (either Autocarโs recall number, or NHTSAโs applicable
recall campaign number);
โข Identification of the owner of the recalled vehicle at the time that the pre-notification remedy was
obtained;
4680 Pinson Valley Parkway, Birmingham, AL 35215 Office: 205.920.2499 Fax: 205.341.0375
โข An original receipt for the pre-notification remedy that includes a breakdown of the amount for
parts, labor, other costs and taxes, including costs for the replacement item. Where the receipt
covers work other than to address the recall or noncompliance, Autocar may require the claimant
to separately identify costs that are eligible for reimbursement.
โข If the remedy was obtained during the warranty period, documentation indicating that the warranty
was not honored or that the warranty repair did not correct the problem related to the recall.
Failure to submit all of the above information may result in denial of the reimbursement request.
VI. Additional Information
The Part 577 required owner notice will provide a toll-free telephone number through which specific
information about the reimbursement plan can be requested from Autocar.
As set forth at 49 C.F.R. 573.6, this general reimbursement plan will be incorporated into notifications by
reference. Information specific to a particular recall also may be incorporated into the Part 573.6
notification.
VII. Response to Requests for Reimbursement
Autocar will act upon requests for reimbursement as follows:
โข Autocar will act upon a claim for reimbursement within 60 days of its receipt. If Autocar denies
the claim, Autocar will send a notice to the claimant within 60 days of receipt of the claim that
includes a clear, concise statement of the reasons for the denial.
โข If a claim for reimbursement is incomplete when originally submitted, Autocar will advise the
claimant within 60 days of receipt of the claim of the documentation that is needed and offer an
opportunity to resubmit the claim with complete documentation.
Reimbursement shall be in the form of a check from Autocar.
VIII. Miscellaneous
Autocar will make a copy of this plan available to the public, upon request.
As permitted by 49 C.F.R. 573.13(m), Autocar will not reimburse owners for recalls based solely on
noncompliant or defective labels.
As set forth at 49 C.F.R. 573.13(n), reimbursement for a pre-notification remedy will not be provided to an
owner if, in the case of a motor vehicle or replacement equipment other than a tire, it was bought by the
first purchaser more than 15 calendar years before notice is given under 49 U.S.C. 30118(c) or an order is
issued under section 49 U.S.C. 30118(b). In the case of a tire, this period shall be 5 calendar years.
Dated: June 1, 2022
**************************************************************************************************************
Page 1 of 3
February 2023
SAFETY RECALL BULLETIN
NHTSA RECALL 23V018
AUTOCAR, LLC SAFETY RECALL ACX-2301
Autocar, LLC
4680 Pinson Valley Parkway
Center Point, AL 35215
888-218-3611
ATTENTION:
Service Managers / Parts Managers.
SUBJECT:
Autocar, LLC has determined that a programming error during manufacturing may allow the
fuel gauge to display 50% constant.
SAFETY RECALL INFORMATION:
This document provides information regarding reprogramming of the instrumentation.
VEHICLES AFFECTED:
There are 206, 2021-2023 model year ACX (Xpeditor) vehicles manufactured between January
5, 2021, and September 19, 2022, with non-sequential serial numbers between 223088 and
241053. To determine if a vehicle is affected by this Recall, log in to the Autocar Warranty
Management System at www.autocartruck.com. From the main menu, select โView Recalls/
Service Programsโ and look for the Autocar Recall number above. A spreadsheet file will be
accessible with the VIN list of affected vehicles. Alternatively, to determine if a single vehicle
is affected, select โVIN Profileโ from the main menu in the Autocar Warranty Management
System. In the โChassis Numberโ field, enter the last 6 of the VIN. Once the VIN profile is
displayed, scroll down to the โRecall/Service Program Informationโ section to determine if the
Recall is open.
SERVICE RESPONSIBILITY:
Service sites must perform this Recall on affected vehicles at no charge to the owner
regardless of vehicle mileage, age, or ownership. If a vehicle affected by this Recall is taken
into or is currently in your vehicle inventory, or at your center for service, you must perform this
Recall before the vehicle is sold or released to the owner.
Page 2 of 3
SAFETY RECALL BULLETIN
NHTSA RECALL 23V018
AUTOCAR, LLC SAFETY RECALL ACX-2301
February 2023
Autocar, LLC
4680 Pinson Valley Parkway
Center Point, AL 35215
888-218-3611
CLAIM CODING INFORMATION:
Labor
Operation
Code Number
Time
Allowance
SRT
Description
36511-0-03 1.0 HR CNG Fuel Gauge
LOCKOUT/TAGOUT PROCEDURES:
Before entering the vehicle or vehicle body, read and follow OSHA regulations concerning
entry and working in โCONFINED SPACEโ OSHA 1910.146 and โLOCKOUT/TAGOUTโ OSHA
1910.147. Follow OSHA regulations while performing any work on the vehicle. The vehicle must
be disabled by the following steps before performing any work on the vehicle:
1. Place the transmission in NEUTRAL.
2. Set the parking brake.
3. Shut the engine OFF.
4. Lock cab doors, keep the key in your pocket. Block the wheels before entering the body or
performing any work on the vehicle.
5. Turn the battery disconnect switch OFF, if equipped.
6. Completely drain the air from the primary/A system and secondary/B system by opening
the drain valves on the air tanks themselves or by using the drain manifold if supplied.
When draining the air tanks, do not look into the area where air is draining. Dirt or sludge
particles may be expelled in the air stream and can cause eye injury.
7. Place magnetic โDANGERโ signs on both cab doors before entering the body or performing
any work on the vehicle.
8. Take proper precautions before working under the vehicle. Use ramps approved for the
weight of your vehicle, or use floor jacks and stands. Never work under a vehicle supported
by jacks alone. Always use jack stands to support the vehicle.
Page 3 of 3
February 2023
SAFETY RECALL BULLETIN
NHTSA RECALL 23V018
AUTOCAR, LLC SAFETY RECALL ACX-2301
Autocar, LLC
4680 Pinson Valley Parkway
Center Point, AL 35215
888-218-3611
REPROGRAMMING INSTRUCTIONS FOR THE CNG FUEL GAUGE
FUNCTION
1. Unlock and open both doors.
2. Log in to the Autocar Warranty Management System at www.autocartruck.com. From
the main menu, select โView Recalls/Service Programsโ and locate โ2021 IFM & Display
Programming SB 3-147-003.โ Complete the update instructions as required.
3. Reprogramming is complete.
Note: If you have questions or concerns regarding this Recall Bulletin, please contact
Autocar Technical Support at 888-218-3611.
**************************************************************************************************************
ACF 00002 Rev. 000
551 South Washington Street, Hagerstown, IN 47346 Office: 765.489.5499 Fax: 765.489.5230
IMPORTANT SAFETY RECALL
This notice applies to your vehicle(s)
with the VIN(s) indicated on the enclosed
owner response cards.
Dear Autocar Truck Owner:
AUTOCAR, LLC RECALL ACX-2301
NHTSA RECALL 23V018
February 2023
This notice is being sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Autocar, LLC has decided that a defect which relates to motor vehicle safety exists in 206, 2021-2023 model
year Xpeditor (ACX) chassis manufactured between January 5, 2021, and September 19, 2022, with nonsequential
serial numbers in the range of 235088 through 241053. Our records indicate that your vehicle was
manufactured within this time and may contain the defect described herein.
MODELS
AFFECTED:
Autocar Xpeditor (ACX) MY 2021-2023
COMPONENTS
AFFECTED:
The fuel gauge may display a false fuel level reading of 50%.
SAFETY DEFECTS
AND POTENTIAL
RISKS:
If the programming error results in a false fuel level reading, the vehicle could run out of
fuel and stall unexpectedly, increasing the risk of a crash.
REPAIR
REQUIRED:
The dash display will be reprogrammed at no charge.
TIME REQUIRED
FOR THE REPAIR:
The labor time to repair your vehicle is 1.0 hour.
WHAT YOU
SHOULD DO:
To have your vehicle repaired, contact your local authorized Autocar service site or email
warranty@autocartruck.com.
ACF 00002 Rev. 000
551 South Washington Street, Hagerstown, IN 47346 Office: 765.489.5499 Fax: 765.489.5230
PRIOR REPAIRS: If you have previously paid for repairs relating to this recall you may be entitled to recover
the amount you paid for those repairs. Submit a copy of all documentation supporting your
claim to Autocar at the address set forth below in the “Assistance” section.
NOTICE
REGARDING
LEASED
VEHICLES:
If you are a Lessor (as defined below) of a vehicle that is affected by this notice, you are
obligated under federal law to provide a copy of this Notice to the lessee of such vehicle
within 10 days of your receipt of this Notice. Further, you must maintain a record, which
identifies the lessee(s) to whom you send a copy of this Notice, the date you send the
Notice and the VIN of the vehicle that you have leased to the lessee(s).
For purposes of this Notice, the term โLessorโ means a person or entity that is the
owner, as reflected on the vehicle’s title, of any five or more leased vehicles, as of the
date of this Notice.
OWNER RECALL
RESPONSE
CARD:
The enclosed Owner Recall Response Card identifies your vehicle. Please complete this
postage-paid card and return it to Autocar. If you do not own, have sold or have traded
the vehicle identified on the card, please indicate that on the postage-paid card and return
it to Autocar.
ASSISTANCE: If you need assistance with this recall, call our toll-free numbers below or write to
Autocar at:
Autocar, LLC
Service & Warranty Departments
551 S. Washington St.
Hagerstown, Indiana 47346
888-218-3611 (Toll Free)
877-973-3486 (Toll Free)
You may also submit a complaint to:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey Avenue SE
Washington, DC 20590
or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 800-424-9153); or go
to http://www.safercar.gov.
We regret any inconvenience this recall may cause, but we hope you recognize Autocarโs concern for your
safety and satisfaction with your vehicle.
Sincerely,
AUTOCAR, LLC
**************************************************************************************************************
ACF 00002 Rev. 000
551 South Washington Street, Hagerstown, IN 47346 Office: 765.489.5499 Fax: 765.489.5230
IMPORTANT SAFETY RECALL
AUTOCAR, LLC ACX-2301
NHTSA RECALL NO. 23V018
February 2023
TO: U.S. Distributors
Dealer Principals, Service Managers, Warranty Managers, Parts Managers
This notice is being sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Autocar, LLC has decided that a defect which relates to motor vehicle safety exists in 206, 2021-2023 model
year Xpeditor (ACX) chassis manufactured between January 5, 2021, and September 19, 2022, with nonsequential
serial numbers in the range of 235088 through 241053. Accordingly, a recall to address this issue
is being initiated effective February 22, 2023.
MODELS
AFFECTED:
Autocar Xpeditor (ACX) MY 2021 – 2023
COMPONENTS
AFFECTED:
A programming error can result in a false fuel level reading of 50%.
SAFETY
DEFECTS AND
POTENTIAL
RISKS:
If the programming error results in a false fuel level reading, the vehicle could run
out of fuel and stall unexpectedly, increasing the risk of a crash.
REPAIR
REQUIRED:
The dash display will be reprogrammed at no charge to the owner.
REPAIR
AVAILABLE:
VIN profiles in the Autocar Warranty System will be updated to show the open recall on
February 22, 2023 and a spreadsheet of the affected VINs will be available in the
Warranty system.
REMINDER: It is a violation of Federal law to sell or lease a vehicle covered by this recall notice
unless the recall remedy has been completed. Substantial civil penalties apply to
violations of this law.
If you have any questions or concerns, please contact the Autocar Warranty Department
at warranty@autocartruck.com.
Sincerely,
AUTOCAR, LLC
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 23V-018
The information contained in this report was submitted pursuant to 49 CFR ยง573
Manufacturer Name : Submission Date :
Autocar, LLC APR 11, 2023 NHTSA Recall No. : 23V-018 Manufacturer Recall No. : ACX-2301
Manufacturer Information :
Manufacturer Name : Autocar, LLC
Address : 551 S WASHINGTON STREET HAGERSTOWN IN 47346
Company phone : 7654895499
Population :
Number of potentially involved : 206 Estimated percentage with defect : 100 %
Vehicle Information : Vehicle 1 : 2021-2023 Autocar ACX (Xpeditor) Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : CNG/LPG
Descriptive Information : All natural gas powered Autocar ACX units manufactured with the instrumentation programming error are included.
Production Dates : JAN 05, 2021 – SEP 19, 2022 VIN Range 1 : Begin : 5VCACSCEXMC235088 End : 5VCACLDF8PC241053 โ Not sequential Description of Defect :
Description of the Defect : A programming error can result in a false fuel level reading of 50% FMVSS 1 : NR
FMVSS 2 : NR
Description of the Safety Risk : If the programming error results in a false fuel level reading, the vehicle could run out of fuel and stall unexpectedly, increasing the risk of a crash.
Description of the Cause : An Autocar programming error occurred during manufacturing.
Identification of Any Warning
that can Occur :
The fuel level will indicate 50% constant.
Involved Components : Part 573 Safety Recall Report 23V-018 Page 2 Component Name 1 : Fuel Level Software Component Description : Software – Autocar Proprietary Component Part Number : No part numbers are assigned Supplier Identification : Component Manufacturer
Name : Autocar LLC Address : 551 S Washington St
Hagerstown Indiana 47346
Country : United States Chronology :
November 4, 2022, Autocar personnel identified an error regarding the fuel level and began investigating. November 11, 2022, A new programming version was developed, and the release initiated to address the fuel level error. November through December 2022 Internal development and validation continued. January 13, 2023, all relevant information was presented to Autocar’s management team and out of an abundance of caution, Autocar decided to perform a voluntary safety recall. Description of Remedy :
Description of Remedy Program : Autocar will voluntarily initiate an owner notification and recall of all
affected vehicles. Autocar will distribute to owners of affected vehicles an Owner Notification Letter, which will describe the defect and provide instructions for scheduling the inspection/repair of the vehicle at no cost to the vehicleโs owner. The owner letter will instruct vehicle owners who have paid to have this condition remedied prior to this campaign to seek reimbursement pursuant to Autocarโs General Reimbursement Plan, on file with the agency pursuant to 49 C.F.R. 573.6(c)(8)(i) and 49 C.F.R 573.13 How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : The instrumentation will be reprogrammed to display the correct fuel level.
The instrumentation programming was changed, and a clean point was established for production November 11, 2022. Recall Schedule : The information contained in this report was submitted pursuant to 49 CFR ยง573 Part 573 Safety Recall Report 23V-018
Page 3
The information contained in this report was submitted pursuant to 49 CFR ยง573
Description of Recall Schedule : Owner and dealer notifications will begin March 23, 2023, and end March
24, 2023.
Planned Dealer Notification Date : MAR 23, 2023 – MAR 24, 2023
Planned Owner Notification Date : MAR 23, 2023 – MAR 24, 2023
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 23V-018
The information contained in this report was submitted pursuant to 49 CFR ยง573
Manufacturer Name : Submission Date :
Autocar, LLC JAN 23, 2023 NHTSA Recall No. : 23V-018 Manufacturer Recall No. : ACX-2301
Manufacturer Information :
Manufacturer Name : Autocar, LLC
Address : 551 S WASHINGTON STREET HAGERSTOWN IN 47346
Company phone : 7654895499
Population :
Number of potentially involved : 206 Estimated percentage with defect : 100 %
Vehicle Information : Vehicle 1 : 2021-2023 Autocar ACX (Xpeditor) Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : CNG/LPG
Descriptive Information : All natural gas powered Autocar ACX units manufactured with the instrumentation programming error are included.
Production Dates : JAN 05, 2021 – SEP 19, 2022 VIN Range 1 : Begin : 5VCACSCEXMC235088 End : 5VCACLDF8PC241053 โ Not sequential Description of Defect :
Description of the Defect : A programming error can result in a false fuel level reading of 50% FMVSS 1 : NR
FMVSS 2 : NR
Description of the Safety Risk : If the programming error results in a false fuel level reading, the vehicle could run out of fuel and stall unexpectedly, increasing the risk of a crash.
Description of the Cause : An Autocar programming error occurred during manufacturing.
Identification of Any Warning
that can Occur :
The fuel level will indicate 50% constant.
Involved Components : Part 573 Safety Recall Report 23V-018 Page 2 Component Name 1 : NR Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer
Name : Autocar LLC Address : 551 S Washington St
Hagerstown Indiana 47346
Country : United States Chronology :
November 4, 2022, Autocar personnel identified an error regarding the fuel level and began investigating. November 11, 2022, A new programming version was developed, and the release initiated to address the fuel level error. November through December 2022 Internal development and validation continued. January 13, 2023, all relevant information was presented to Autocar’s management team and out of an abundance of caution, Autocar decided to perform a voluntary safety recall. Description of Remedy :
Description of Remedy Program : Autocar will voluntarily initiate an owner notification and recall of all
affected vehicles. Autocar will distribute to owners of affected vehicles an Owner Notification Letter, which will describe the defect and provide instructions for scheduling the inspection/repair of the vehicle at no cost to the vehicleโs owner. The owner letter will instruct vehicle owners who have paid to have this condition remedied prior to this campaign to seek reimbursement pursuant to Autocarโs General Reimbursement Plan, on file with the agency pursuant to 49 C.F.R. 573.6(c)(8)(i) and 49 C.F.R 573.13 How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : The instrumentation will be reprogrammed to display the correct fuel level.
The instrumentation programming was changed, and a clean point was established for production November 11, 2022. Recall Schedule : The information contained in this report was submitted pursuant to 49 CFR ยง573 Part 573 Safety Recall Report 23V-018
Page 3
The information contained in this report was submitted pursuant to 49 CFR ยง573
Description of Recall Schedule : Owner and dealer notifications will begin March 23, 2023, and end March
24, 2023.
Planned Dealer Notification Date : MAR 23, 2023 – MAR 24, 2023
Planned Owner Notification Date : MAR 23, 2023 – MAR 24, 2023
* NR – Not Reported
SEOCONTENT-END
Last update on 2025-04-19 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.