โThis site contains affiliate links for which OEMDTC may be compensatedโ |
March 14, 2023 NHTSA CAMPAIGN NUMBER: 23C003000
Insufficient Child Seat Inner Carrier/FMVSS 213
In the event of a crash, an insufficiently restrained child has an increased risk of injury.
NHTSA Campaign Number: 23C003
Manufacturer Dorel Juvenile Group
Components CHILD SEAT
Potential Number of Units Affected 14,510
Summary
Dorel Juvenile Group (Dorel) is recalling certain Maxi-Cosi Coral XP Rear-facing Infant Seats with model number IC313. The child seat inner carrier
is not sufficient to restrain a child without the use of the outer carrier
. As such, these child seats
fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 213, “Child Restraint Systems.”
Remedy
Owners are advised to only use the inner carrier of the Coral XP when it is attached to the outer carrier
and installed with or without the base using the vehicle belt restraint system, consistent with the existing instruction booklet and labels. Dorel will offer a refund or replace the child seat
, free of charge. Owner notification letters are expected to be mailed April 7, 2023. Owners may contact Dorel’s customer service at 1-877-657-9546 or CoralXPRecall@djgusa.com.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
On 3/9/2023 Dorel attended a video call meeting with NHTSA OVSC representatives who shared concerns about the inner carrier of the IC313 Maxi-Cosi Coral XP Infant Car Seat
. NHTSA followed up after the call and emailed draft compliance reports for the Coral XP related to their FY2021 testing and FY2022 testing. Both draft reports indicated noncompliance’s related to the design and labeling of the Coral XP’s inner carrier
, which is considered by NHTSA to be the “child restraint system”. Coral XP’s inner carrier
cannot be installed into a vehicle without the use of the outer carrier
, which NHTSA considers to be a “supplemental device”. As such all Coral XP models fail to comply with the requirements of Federal Motor Safety Standard 213, “Child Restraint Systems.”
1 Affected Product
BRAND | MODEL | PRODUCTION DATES |
MAXI-COSI | CORAL XP |
2 Associated Documents
Noncompliance Notice 573 Report
RCLRPT-23C003-3968.PDF 214.212KB
Recall Acknowledgement
RCAK-23C003-1361.pdf 645.794KB
Latest Recalls Documents
- Infant car seat
helps protect rear-facing infants 4-30 lb and up to 32"
- Lightweight infant car seat
weighs only 7.2 lb, making it easy to carry baby from car to stroller
- 4-position adjustable base helps ensure an accurate install and helps keep baby comfortable as he or she grows
- Easy-to-read level indicator helps eliminate installation guesswork from the installation process, so you can feel confident itโs installed correctly
- Graco
ProtectPlus Engineered: a combination of the most rigorous crash tests that helps protect your child in frontal, side, rear & rollover crashes; additional testing based on the New Car Assessment Program and for extreme car interior temperatures
- This car seat
is lightweight and offers easy mobility
- The car seat
is equipped with deep side wings for advanced protection, with head and bottom inserts to keep baby comfortable and well supported
- The no-twist indicators located on the harness adds easy, no fuss safety, and an adjustable canopy with a visor provides sun protection and coverage
- Meets and exceeds all federal safety standards; Certified for aircraft travel to always keep your baby safe and secure!
- The base includes a flip-foot recline and bubble level indicator for an angle that is just right for your little one
- Six position, easy adjust headrest and harness to support your growing baby
- Delta carrying handle for multiple carrying positions
- Built-in PRO Side Grip with comfort accent for ergonomic carrying, taking the strain off your back
- Push-on LATCH connectors with easy use indicators for quick and hassle-free installation
- No-twist indicators on harness for easy, no fuss safety for baby
- GOOD TO GROW: Accommodates babies weighing 4 โ 35 lb and adapts as they grow with 4 shoulder harness positions
- MANUEVER WITH EASE: Features an extremely lightweight design that makes it easy to pick up, carry, and go about your day
- TAKE THE PRESSURE OFF: Ergonomic handle makes it more comfortable to carry the car seat
in the bend of the arm
- PROTECT YOUR CARGO: Full coverage canopy shields your little one from the sun, wind and rain
- LOCK IN, BREATHE EASIER: Easy-to-install base is equipped with a vehicle belt lock-off to ensure a quick, secure installation
- Adaptable Growth: Converts to suit your child from rear-facing harness (4-50lbs) to forward-facing harness (22-65 pounds)
- Solid Build: Steel-reinforced with dimensions of 21.5 D x 19.5 W x 23.5 H inches, and weighing 19 lbs.
- Extended Rear-facing: Offers up to 50 pounds rear facing, focusing on your child's safety
- Top Safety Standards: Graco
ProtectPlus Engineered, ensuring protection in frontal, side, rear, and rollover crashes
- 4-Position Panel: The Extend2Fit 4-position adjustable extension panel provides up to 5 of additional legroom
- 3 Wheel Stroller for easy turning / mobility
- Parent Tray with 2 cup holders & center storage cover; Swing away Child Tray with large 2 cup holders
- Large Basket with wide rear access, and Large Canopy with Peek-A-Boo Windowโ
- Includes Baby Trend EZ-Lift Infant Car Seat
with an integrated Side Grip that allows for ergonomic carrying
- Stroller and car seat
have 5-point harnesses with padded shoulder strap covers
- SnugRide performance helps protect rear-facing infants from 4-30 lb and up to 32"
- Anti-Rebound Bar provides an additional layer of rear-facing safety
- SnugLock technology installs in less than one minute using vehicle seat belt or LATCH
- Headrest and harness adjust together while your child is in the seat with the front-adjust No-Rethread Simply Safe Adjust Harness System
- InRight LATCH provides a 1-second LATCH attachment for quick installation
- GROW WITH ME CAR SEAT
: This car seat
for newborn to toddler to big kid accommodates your child from rear-facing newborn (5โ40 lbs., 19"โ40"), toddler forward-facing (30โ65 lbs., 34.4"โ49"), highback belt-positioning booster seat (40โ100 lbs., 43.4"โ52").
- GETTING A GOOD FIT IS QUICK AND EASY: The convertible carseat designed with the QuickFit harness simplifies harness and headrest adjustments, making it easy to get your child in and out of the car seat
.
- SIMPLE TO CLEAN: The washer-and-dryer-safe seat pad features snaps that make it easy to remove from the convertible carseats, along with 2 dishwasher-safe cupholders for fuss-free cleaning.
- BUILT TO GROW: The convertible car seat
for children from 5โ100 lbs. can be used in rear-facing, forward-facing, and belt-positioning booster modes. 2 removable grow-with-me baby pillows for a snug fit; the convertible car seat
also has 3-position recline.
- PARENT-FRIENDLY FEATURES: Getting kids in and out of the car is made easier with harness holders that keep harness straps out of the way whether your using it as a baby carseat, forward facing car seat
or highback belt-positioning car seat
booster.
- 3-in-1 harness booster helps protect your child, from toddler to youth
- Grows with your child from forward-facing harness (22-65 lb) to highback booster (40-100 lb*) to backless booster (40-100 lb) *To continue to meet industry standards, we have increased the weight minimum from 30 to 40 lb
- No-Rethread Simply Safe Adjust Harness System allows the headrest and harness to adjust together in one motion
- Lightweight, portable seat is ideal for busy, active parents
- One-hand, 8-position adjustable headrest grows with your child
- SnugLock Technology: Installs in less than one minute using vehicle seat belt or LATCH
- TrueShield Advanced Side-Impact Protection helps keep your child safe in the event of a side impact, with protection from head to hips
- Helps protect rear-facing infants from 4-30 lb and up to 32"
- 1-hand adjustable handle makes getting baby in and out easy
- Silent Shade canopy adjusts quietly without disturbing baby
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23C-003 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Dorel Juvenile Group Submission Date : MAR 14, 2023 NHTSA Recall No. : 23C-003 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Dorel Juvenile Group Address : 2525 STATE STREET COLUMBUS IN 47201 Company phone : 800-544-1108 Population : Number of potentially involved : 14,510 Estimated percentage with defect : 100 % Child Restraint Information : Make 1 : Maxi-Cosi Model : Coral XP Seat Type : REARFACING INFANT SEAT Model No. : IC313 Platform Name / No. : NR Brand Name : NR Descriptive Information : On 3/9/2023 Dorel attended a video call meeting with NHTSA OVSC representatives who shared concerns about the inner carrier of the IC313 Maxi- Cosi Coral XP Infant Car Seat
. NHTSA followed up after the call and emailed draft compliance reports for the Coral XP related to their FY2021 testing and FY2022 testing. Both draft reports indicated noncompliance’s related to the design and labeling of the Coral XP’s inner carrier
, i.e., child restraint system. Coral XP’s child restraint system cannot be installed into a vehicle without the use of the outer carrier
, which is a supplemental device. As such all Coral XP models fail to comply with the requirements of Federal Motor Safety Standard 213, “Child Restraint Systems.” Production Dates : MAY 01, 2020 – FEB 28, 2023 Description of Noncompliance : Description of the Noncompliance : During NHTSA’s FY2021 and FY2022 compliance testing on IC313 Maxi-Coral XP Infant Car Seat
, several noncompliance’s related to the design and labeling of the Coral XP’s inner carrier
were found, including: S5.3.2 Installation, S5.5.1/S5.5.2 Labeling, S5.6.1 Printed Instructions, and S6.1.2 Dynamic Procedure. Coral XP’s child restraint system, i.e., the inner carrier
cannot be installed into a vehicle without the use of a supplemental device, i.e., the outer carrier
. As such all Coral XP models fail to comply with the requirements of Federal Motor Safety Standard 213, “Child Restraint Systems.” Part 573 Safety Recall Report 23C-003 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 FMVSS 1 : 213 – Child restraint systems FMVSS 2 : NR Description of the Safety Risk : Installing Coral XP into a vehicle with only its inner carrier
will not properly restrain the occupant, increasing the risk of injury in a crash. Description of the Cause : NR Identification of Any Warning that can Occur : NR Involved Components : Component Name : IC313 Maxi-Cosi Coral XP Infant Car Seat
Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : On 3/9/2023 Dorel attended a video call meeting with NHTSA OVSC representatives who shared concerns about the inner carrier
of the IC313 Maxi-Cosi Coral XP Infant Car Seat
. NHTSA followed up after the call and emailed draft compliance reports for the Coral XP related to their FY2021 testing and FY2022 testing. Both draft reports indicated noncompliance’s related to the design and labeling of the Coral XP’s inner carrier
, which is considered by NHTSA to be the “child restraint system”. Coral XP’s inner carrier
cannot be installed into a vehicle without the use of the outer carrier
, which NHTSA considers to be a “supplemental device”. As such all Coral XP models fail to comply with the requirements of Federal Motor Safety Standard 213, “Child Restraint Systems.” Part 573 Safety Recall Report 23C-003 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 Description of Remedy : Description of Remedy Program : Until Dorel can provide Coral XP owners a refund or replacement car seat
remedy, the inner carrier
of the Coral XP may continue to be used when attached to the outer carrier
and the outer carrier
is installed with or without the base using the vehicle belt restraint system, consistent with the existing instruction booklet and labels. How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Description of Recall Schedule : NR Planned Dealer Notification Date : MAR 24, 2023 – MAR 24, 2023 Planned Owner Notification Date : APR 07, 2023 – APR 28, 2023 Purchaser Information : The following manufacturers purchased this defective/noncompliant equipment for possible use or installation in new motor vehicles or new items of motor vehicle equipment: Name : NR Address : NR NR Country : NR Company Phone : NR * NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.