“This site contains affiliate links for which OEMDTC may be compensated” |
March 30, 2023 NHTSA CAMPAIGN NUMBER: 23V223000
Corrosion on Remote Control Circuit Board
A winch that operates unintentionally increases the risk of injury.
NHTSA Campaign Number: 23V223
Manufacturer Four Degree Trailer Company
Components EQUIPMENT, ELECTRICAL SYSTEM
Potential Number of Units Affected 65
Summary
Four Degree Trailer Company (Four Degree) is recalling certain 2019-2022 Lo-LAL and IPT-EOT trailers, equipped with a Warn Winch and a wireless handheld remote. Water may enter the handheld remote control for the winch and cause circuit board corrosion, which can allow the winch to operate unintentionally.
Remedy
Four Degree will work with Warn Industries, Inc. to provide owners instructions on how to inspect the remote for corrosion and disable the wireless function by removing the battery pack from the remote. If corrosion or water intrusion is found when removing the battery pack
owners should stop using the remote and contact WARN customer service for a replacement remote, free of charge. Once new parts are available, WARN will make a replacement water resistant remote available, free of charge. Owner notification letters were mailed April 12, 2023. Owners may contact Four Degree customer service at 1-309-853-3387.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Four Degree Trailer Company has decided that a defect which relates to motor vehicle safety exists in certain 2019-2022
Lo-LAL and IPT-EOT trailers, equipped with a Warn Winch and a wireless handheld remote. Water may enter the handheld remote control for the winch and cause circuit board corrosion, which can allow the winch to operate unintentionally, increasing the risk of injury. Only the remote is subject to this recall notice, the winch is not affected. This notice applies to product sold and used in the USA.
Products affected: Remotes shipped with all EVO winch models manufactured between June 3, 2019 to November 29, 2022.
PN 103250 – VR EVO 8
PN 103251 – VR EVO 8-S
PN 103252 – VR EVO 10
PN 103253 – VR EVO 10-S
PN 103254 – VR EVO 12
PN 102355 – VR EVO 12-S
PN 104218 – S/P Remote & Control Module
Product Identification:
VR EVO Winch Serial numbers Affected:
03062019xxxx – 29112022xxxx
(03 June 2019 – 29 November 2022)
Serial numbers are located on the back side of the winch drum support.
AND, with this Remote Switch Face Configuration (all components on the switch face are black in color)
What should you do?
If you own any of the products listed above, we ask that you immediately do the following:
- Stop using the remote.
- Follow the attached instructions and inspect the inside of the remote for corrosion.
- Remove the battery pack
from inside the remote as shown in the attached instructions to disable the wireless control function.
- The remote can still be used to control the winch when physically plugged into the winch without the battery pack
.
- Keep the remote dry and unplugged when not in use.
A copy of these instructions can also be found at: www.warn.com/vr-evo-remote-info
If your remote has been exposed to water, or is malfunctioning, contact WARN Customer Service at 800-543-9276 or cs@warn.com to arrange for a replacement.
What will we do?
- Warn Industries will send a replacement water-resistant remote control, at no charge.
- Warn will replace your existing VR EVO remote with a “corded-only” remote if any internal corrosion is observed when removing the battery pack
.
- As compensation for losing the wireless functionality on your existing remote or replacement “corded-only” remote, Warn Industries will provide current VR EVO winch owners with a $100 coupon valid toward the purchase of a new wireless remote product, or any other future purchase on warn.com.
- Registration and instructions on how to receive your coupon can be found at: warn.com/vr-evo-remote-info. Winch owners will be required to provide verification of battery pack
removal and or proof of purchase to receive the coupon.
Who Should You Contact with Further Questions or Concerns?
If you have questions or concerns about this recall, please contact WARN Customer Service at 800-543-9276 or cs@warn.com, or visit our website at www.warn.com/vr-evo-remote-info.
If Warn Industries fails or is unable to remedy this defect without charge, or within a reasonable amount of time, you may submit a written complaint to: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave SE, Washington, DC 20590. You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov.
What If You Already Paid for This Repair?
You may be eligible to receive a reimbursement for the cost of repairs made prior to receiving this notice. You may submit your receipts along with a reimbursement request to cs@warn.com or by mail to Warn Industries, Attn: VR EVO Remote Recall, 12900 SE Capps Rd., Clackamas, OR 97015.
The safety of our customers is paramount to Warn Industries. Since 1948, Warn has put the customer first by offering the highest quality products and by doing the right thing. These core values will continue on into our 75th year of business.
22E101 Corrosion on Remote Control Circuit Board – WARN VR EVO Winch Wireless/Handheld Remote
22E101 Corrosion on Remote Control Circuit Board – WARN VR EVO Winch Wireless/Handheld Remote
8 Affected Products
Vehicles
MAKE | MODEL | YEAR |
FOUR DEGREE | IPT-EOT | 2019-2022 |
FOUR DEGREE | LO-LAL | 2019-2022 |
5 Associated Documents
Recall Acknowledgement
RCAK-23V223-2967.pdf 682.975KB
Recall 573 Report – 4/5/2023
RCLRPT-23V223-5404.PDF 214.075KB
NHTSA Recall No. 22E101 Owner Notification Letter
RMISC-23V223-8347.pdf 1151.047KB
Defect Notice 573 Report
RCLRPT-23V223-6446.PDF 212.313KB
ISSUED Owner Notification Letter(Part 577) – Redacted
RCONL-23V223-2007.pdf 420.78KB
Latest Recalls Documents
- Special designed for atv, utv, car, boat, trucks, jeeps, modified vehicles and multi purpose utility trailers
- 6.6hp 12v series wound motor and three-stage planetary gear system with free spooling clutch.85' Length 3/8" Steel rope
- Waterproof and sandproof, state-of-the-art 500AMP Solenoid.Unique clutch brake system, excellent control
- Please confirm the fit of mounting plate before purchase: outline size :(length X width X height) 20.8"X 6.7" X 10"
- Pease read the instruction carefully. The winch can cause short circuits if wiring is wrong. If you have any problems, please feel free to consult with us.
- Unmatched Pulling Power: With a robust 12,000 lb capacity and a powerful 6HP motor, this 12V electric winch effortlessly handles off road recovery, ensuring your always ready.
- High Strength Synthetic Rope: Equipped with 85ft. of 3/8" thick scratch and abrasion-resistant synthetic rope, its lightweight and easier to handle, delivering reliable pulling power without the risk of kinks or fraying.
- Smart Remote Control: Take control from a safe distance with the convenient wired handheld remote controller, ensuring fast and precise winch control.
- Built for the Wild: Built to withstand the elements, this winch features an IP67 rated waterproof housing and sealed components, ensuring optimal performance in any weather or location.
- Everything You Need: Compatible with various bumper and mounting setups, includes battery cables, hawse fairlead, clevis hook, 85' x 3/8" synthetic rope and mounting hardware for easy bolt-on installation.
- POWERFUL MOTOR: The electric winch provides 13,500 lbs/ 6136 kg. of load capacity. 12 Volt DC heavy duty trailer winch with a 4.8kw/6.5HP pure copper permanent magnet series wound motor that ensures reliable performance even in demanding situations. Nilight 12V winch as a second power source for your vehicle, helping to get it out of difficulties such as getting stuck in the mud
- SAFETY & EFFICIENCY: ATV winch with synthetic rope is lighter and stronger than steel winch cable. Waterproof IP68 rating. 265:1 gear reduction ratio and 3 Stage planetary gear system with Sliding Ring Gear Clutch and Auto In Drum Braking for faster linear speed, quiet and reliable traction, corrosion resistant and waterproof to ensure the smooth running of the electric winch during the working process
- PREMIUM MATERIAL: Satin black cast aluminum housing, waterproof powder coated surface and sealed engine effectively isolates rain and moisture, corrosion and UV resistance. With durable 9mm x 24m / 3/8" x 79' synthetic winch rope Heat-treated 12-strand construction, lightweight construction with high tensile strength is strong enough for any outdoor towing operation
- DIMENSION: 13,500 lb 12 volt badlands winch total size: 20.8"x9"x6.3". Fixed bolt pattern:0.43"(10.9 mm). Mounting Pattern:9.97"x4.45"(lease confirm whether the installation plate is suitable before purchase). Fairlead Mounting Pattern: 10"(254mm). Ideal for any outdoor small vehicle ATV UTV Trailer Car Boat Trucks Jeeps Off-Road modified vehicles and multi-purpose trailers
- TWO REMOTE CONTROL OPTIONS: one wired handle control (No additional wiring required) and the other a wireless remote control (range up to 98 feet).the winch’s receiver responds quickly, ensuring that the winch responds quickly when you operate anywhere
- Built for ATVs, UTVs, compact SUVs,off-road vehicles, boats,and trailers.Our compact winches offer both wireless and wired remote control options to suit your needs. Both control modes offer flexibility and convenience, providing double coverage for your vehicle.
- 3 stage planetary gears multiply torque exponentially for heavy loads. Engineered for sustained operation, while auto-brake system locks loads during power outages - to ensure the safety of you and your belongings.
- 12V DC 2.0HP pure copper permanent magnet motor with 166:1 gear ratio, rated at 4,500 lbs pulling force.Matte black finish resists scratches, rust, and corrosion while improve insulation and durability.
- Complete kit includes mounting plate and all necessary hardware.Upgraded solenoid reduces the risk of short circuit: connect yellow/blue wires to winch, red/black to battery. Full installation in under 60 seconds.
- IP67 dust/waterproof,43ft UV-treated nylon rope weighs only 1/4 of steel cable,suitable for wet and low temperature environments.Energy-absorbing stretch prevents snap-back injuries versus steel cable’s whiplash risks.
- With a pull force of more than 3000 pounds, this electric winch delivers a 1.0kw/ 1.3HP 210 amp 12V DC permanent magnet motor with a 153:1 planetary gear system with a fully loaded line speed of 3.3 ft/min and a load free line speed of 1.3 ft/min.
- Waterproof powder coated surface, resistant to corrosion. Durable 3/16" x 32' steel cable is sufficient for any outdoor traction operation.This 12 volt UTV winch includes a choice of steel rope to suit all the different tasks you may have.
- Each lead wire is connected to the corresponding position, the connection is very convenient and fast; 12.63-inch (approx. 32.0 cm) blue (-) and yellow (+) wires are connected to the motor; 68.75 inches (about 172.0 cm) Red (+) wire and black (-) wire Connect to battery (All wires: No. 6) Winch and flat rod, mounting bracket (not included in this product). Using grab blocks helps make your job easier; Another safety tip: Place the blanket on the cable to reduce whipping if it comes loose.
- The winch will include an 18.5 x 13 cm (L x W) universal mounting plate for mounting on the rear of the machine, which will need to be modified to fit with each particular machine, as well as a wireless remote control for the 9.8-11.6 m range, a 1.2 m handlebar rocker, and a 0.6 cm U Hook, chain fly bar,8.0 cm mounting bolt pattern.
- We use the planetary gear system, which can automatically brake, while we want to achieve the highest speed and a certain guarantee to provide safe and reliable power in any situation.
- [ NEW DESIGN]The newly designed model allows you to be the focus of your exploration of the world.The black frosted spray paint with new material will not rust.And it improves the model's thermal insulation and model's durability.The all-steel shell can protect the winch well.The new design is more conducive to the heat dissipation of the gearbox to ensure the long operation of the winch.
- [STRONG POWER]7.2hp 12v series wound motor and three-stage planetary gear system with free spooling clutch.85' Length7/16" Diameter Nlyon rope
- [SPECIAL DESIGNED]Special designed for atv, utv, car, boat, trucks, jeeps, modified vehicles and multi purpose utility trailers
- [POWERFUL PLANETARY GEAR]The real three sets of 3-Stage Planetary enables differential, deceleration (qrowth), reversal, and more. The combined use of multiple groups of planetary wheel systems can achieve a very large speed ratio,which can achieve coaxial deceleration (growth).
- [NEW CONTROL SYSTEM]The new control system will definitely surprise you. The 2-in-1 remote combines wired remote control and infrared remote control power system. The signal control range of the remote controller can reach up to 100ft. Both wired and infrared control have been integrated intio this multifunctional controller
- 5 TON COME ALONG WINCH: Heavy-duty mini
come along five ton come along hand winch cable puller delivers serious pulling power for construction, home, farms, ranch, fences, and automotive use. Max horizontal load capacity of 10,000 pounds.
- WINCH HOOK: Heavy duty puller steel construction for added durability; hooks and gears are zinc plated for a long-lasting life in your garage or workshop when pulling, dragging, lifting, or stretching. Safety latch on all hooks to prevent accidents or slipping off.
- RATCHETING CABLE COME ALONG: Powerful ratcheting come along pulling system allows for one-handed operation when pulling or winching even the heaviest loads. The winch cable ratchet pulley system length is 6mm thick and 3.2 meters or 10 feet long.
- DOUBLE GEAR MANUAL WINCH: Double-gear design locks on for evenly distributed force and easy to gauge notched pulling action for an easy, smooth, and consistent. Max vertical load capacity is also called weight capacity of 2 tons or 4,000 pounds.
- LEVER ARM: Includes long industrial hand ratchet handle with PVC coated grip for leverage and 3 latching hooks for added safety and versatility when going off road vehicle recovery, pulling fences, logs, stumps, or rocks.
- UNMATCHED POWER: Our new winch is built for power and endurance, featuring a 6.0hp/4.5kw pure copper motor that can easily handle up to 13,000 lbs. Designed for demanding tasks, the winch’s motor works in tandem with a 3-stage planetary gear system, providing a precise transmission ratio of 218:1. This combination ensures the strength to recover even the heaviest vehicles with efficiency and stability.
- RELIABLE IP68 WATERPROOF: Engineered to tackle harsh environments, this winch is equipped with an IP68 rating, ensuring it withstands water, dust, and dirt in even the most extreme off-road situations. With this level of protection, you can focus on the adventure ahead, knowing your equipment will perform when you need it most.
- FLEXIBLE CONTROL BOX INSTALLATION: The versatile control box provides up to four different mounting options, thanks to its included mounting plate and brackets, allowing for easy adaptation to various vehicle types. This flexibility ensures that the winch not only performs reliably but also integrates seamlessly into your vehicle, enhancing its rugged look while retaining full functionality.
- DUAL-MODE OPERATION WITH ENHANCED SAFETY: Offering both wired and wireless operation options, this winch provides exceptional flexibility in control. The wired controller features an extended cable, keeping you at a safe distance while operating. For added convenience, the wireless remote boasts an impressive 100ft range, allowing for responsive control from a distance. This dual-mode design not only enhances safety by providing options in varied conditions but also makes it easier to navigate complex recovery scenarios with total control.
- DIMENSIONS & SPECIAL DESIGN: With dimensions of 21” X 6.1” X 7.3” (540 X 158 X 187mm), this winch fits a variety of off-road vehicles and offers an effective solution for diverse recovery situations. Its new black exterior design not only adds a modern and hardcore style to your vehicle, but is also functional and aesthetically pleasing. Built for those who value both utility and aesthetics, this winch blends seamlessly with your vehicle’s look, helping you stand out on any terrain.
- Manufactured in China.Fit Type: Vehicle Specific
- Easy to use
- Highly durable
- Always remove any element or obstacle that may interfere with safe operation of the pulling tool
- No load line speed: 13.8 fpm
- Special designed for atv, utv, car, boat, trucks, jeeps, modified vehicles and multi purpose utility trailers
- Powerful – 2000-lb. rated line pull powered by a 1.0 (12-volt) DC motor
- Pull-and-turn freespooling clutch; Gearing- 1-Stage Planetary,Low-amp, permanent magnet motor; Gear Ratio- 153:1
- Hassle-Free –The roller fairlead creates a safe and smooth pull with the dependable 50-foot galvanized super-duty aircraft cable which is able to withstand abrasive terrain without fraying
- Please read the instruction carefully. The winch can cause short circuits if wiring is wrong. If you have any problems, please feel free to consult with us
SEOCONTENT-START
WARN INDUSTRIES, INC. January 6, 2023
12900 SE Capps Road
Clackamas, Oregon 97015
IMPORTANT SAFETY RECALL NOTICE
NHTSA Recall No. 22E101
Re: WARN® Handheld Wireless/Corded Remote Control for VR EVO Winches
To: Owners of WARN VR EVO Winches
Dear Valued Customer,
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Warn Industries has decided that a defect which relates to motor vehicle safety exists in the handheld remote-control device that was sold with WARN VR EVO winches. A small number of remotes which have been exposed to or submerged in water have exhibited failures that can result in unintended winch operation, which increases the risk of injury. Only the remote is subject to this recall notice, the winch is not affected. This notice applies to product sold and used in the USA.
Products affected: Remotes shipped with all EVO winch models manufactured between June 3, 2019 to November 29, 2022.
PN 103250 – VR EVO 8
PN 103251 – VR EVO 8-S
PN 103252 – VR EVO 10
PN 103253 – VR EVO 10-S
PN 103254 – VR EVO 12
PN 102355 – VR EVO 12-S
PN 104218 – S/P Remote & Control Module
Product Identification:
VR EVO Winch Serial numbers Affected:
03062019xxxx – 29112022xxxx
(03 June 2019 – 29 November 2022)
Serial numbers are located on the back side of the winch drum support.
AND, with this Remote Switch Face Configuration (all components on the switch face are black in color)
What should you do?
If you own any of the products listed above, we ask that you immediately do the following:
1. Stop using the remote.
2. Follow the attached instructions and inspect the inside of the remote for corrosion.
3. Remove the battery pack from inside the remote as shown in the attached instructions to disable the wireless control function.
4. The remote can still be used to control the winch when physically plugged into the winch without the battery pack.
5. Keep the remote dry and unplugged when not in use.
A copy of these instructions can also be found at: www.warn.com/vr-evo-remote-info
If your remote has been exposed to water, or is malfunctioning, contact WARN Customer Service at 800-543-9276 or cs@warn.com to arrange for a replacement.
What will we do?
• Warn Industries is developing a replacement water-resistant remote control that it will make available to affected customers, at no charge, when the product is available.
• Warn will replace your existing VR EVO remote with a “corded-only” remote if any internal corrosion is observed when removing the battery pack.
• As compensation for losing the wireless functionality on your existing remote or replacement “corded-only” remote, Warn Industries will provide current VR EVO winch owners with a $100 coupon valid toward the purchase of a new wireless remote product, or any other future purchase on www.warn.com.
• Registration and instructions on how to receive your coupon can be found at: www.warn.com/vr-evo-remote-info. Winch owners will be required to provide verification of battery pack removal and or proof of purchase to receive the coupon.
• The inspection and replacement will take approximately 5 – 10 minutes.
Who Should You Contact with Further Questions or Concerns?
If you have questions or concerns about this recall, please contact WARN Customer Service at 800-543-9276 or cs@warn.com, or visit our website at www.warn.com/vr-evo-remote-info.
If Warn Industries fails or is unable to remedy this defect without charge, or within a reasonable amount of time, you may submit a written complaint to: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave SE, Washington, DC 20590. You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov.
What If You Already Paid for This Repair?
You may be eligible to receive a reimbursement for the cost of repairs made prior to receiving this notice. You may submit your receipts along with a reimbursement request to cs@warn.com or by mail to Warn Industries, Attn: VR EVO Remote Recall, 12900 SE Capps Rd., Clackamas, OR 97015.
The safety of our customers is paramount to Warn Industries. Since 1948, Warn has put the customer first by offering the highest quality products and by doing the right thing. These core values will continue on into our 75th year of business.
Sincerely,
Kyle Shiminski
VP & General Manager
Warn Industries
VR EVO Remote Battery Pack Removal Instructions
Using a Phillips screwdriver, remove the three screws from the remote control cover.
1.
Remove the remote control cover and locate battery pack.
2.
Cut the grey and white wires to release the battery pack from the remote.
3.
Remove and discard battery pack completely.
4.
Replace remote control cover and the three screws.
5.
Take time to fully read and complete all instructional steps and warnings.
When winch is not in use, unplug the remote control cable from the remote control base AND the winch remote socket. Store remote control in a protected, dry place.
6.WARNING
Always store the remote control in a protected, clean, dry area.WARNING
Never leave remote control where it can be activated during free spooling, rigging, or when the winch is not being used.WARNING Never leave the winch remote control plugged in when installing, freespooling, rigging, servicing or when the winch is not being used.
For further information or any questions contact:
WARN INDUSTRIES, INC.
12900 S.E. Capps Road, Clackamas
OR USA 97015-8903, 1-503-722-1200,
Customer Service: 1-800-543-9276
or visit www.warn.com.WARNING If corrosion is observed on the circuit board or battery pack, DO NOT USE the remote. Contact Warn Industries’ customer service for a replacement.
109400A0
**************************************************************************************************************
Four Degree Trailer Company
3726 HWY 34
Kewanee, IL 61443
IMPORTANT SAFETY RECALL
NHTSA Recall No. 23V223
Handheld Wireless/Corded Remote Control for VR EVO Winches
This notice applies to your trailer,
04/12/2023
Dear
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Four Degree Trailer Company has decided that a defect which relates to motor vehicle safety exists in certain 2019-2022
Lo-LAL and IPT-EOT trailers, equipped with a Warn Winch and a wireless handheld remote. Water may enter the handheld
remote control for the winch and cause circuit board corrosion, which can allow the winch to operate unintentionally,
increasing the risk of injury. Only the remote is subject to this recall notice, the winch is not affected. This notice applies
to product sold and used in the USA.
Products affected: Remotes shipped with all EVO winch models manufactured between June 3, 2019 to November 29,
2022.
PN 103250 – VR EVO 8
PN 103251 – VR EVO 8-S
PN 103252 – VR EVO 10
PN 103253 – VR EVO 10-S
PN 103254 – VR EVO 12
PN 102355 – VR EVO 12-S
PN 104218 – S/P Remote & Control Module
Product Identification:
VR EVO Winch Serial numbers Affected:
03062019xxxx – 29112022xxxx
(03 June 2019 – 29 November 2022)
Serial numbers are located on the back side of the winch drum support.
AND, with this Remote Switch Face Configuration (all components on the switch face are black in color)
What should you do?
If you own any of the products listed above, we ask that you immediately do the following:
1. Stop using the remote.
2. Follow the attached instructions and inspect the inside of the remote for corrosion.
3. Remove the battery pack from inside the remote as shown in the attached instructions to disable the wireless control
function.
4. The remote can still be used to control the winch when physically plugged into the winch without the battery pack.
5. Keep the remote dry and unplugged when not in use.
A copy of these instructions can also be found at: www.warn.com/vr-evo-remote-info
If your remote has been exposed to water, or is malfunctioning, contact WARN Customer Service at 800-543-9276 or
cs@warn.com to arrange for a replacement.
What will we do?
• Warn Industries will send a replacement water-resistant remote control, at no charge.
• Warn will replace your existing VR EVO remote with a “corded-only” remote if any internal corrosion is observed when
removing the battery pack.
• As compensation for losing the wireless functionality on your existing remote or replacement “corded-only” remote,
Warn Industries will provide current VR EVO winch owners with a $100 coupon valid toward the purchase of a new
wireless remote product, or any other future purchase on www.warn.com.
• Registration and instructions on how to receive your coupon can be found at: www.warn.com/vr-evo-remote-info.
Winch owners will be required to provide verification of battery pack removal and or proof of purchase to receive the
coupon.
Who Should You Contact with Further Questions or Concerns?
If you have questions or concerns about this recall, please contact WARN Customer Service at 800-543-9276 or
cs@warn.com, or visit our website at www.warn.com/vr-evo-remote-info.
If Warn Industries fails or is unable to remedy this defect without charge, or within a reasonable amount of time, you may
submit a written complaint to: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave SE,
Washington, DC 20590. You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go
to http://www.safercar.gov.
What If You Already Paid for This Repair?
You may be eligible to receive a reimbursement for the cost of repairs made prior to receiving this notice. You may submit
your receipts along with a reimbursement request to cs@warn.com or by mail to Warn Industries, Attn: VR EVO Remote
Recall, 12900 SE Capps Rd., Clackamas, OR 97015.
The safety of our customers is paramount to Warn Industries. Since 1948, Warn has put the customer first by offering
the highest quality products and by doing the right thing. These core values will continue on into our 75th year of
business.
Sincerely,
Denis Shenaut
Four Degree Trailer Company
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 23V-223
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Four Degree Trailer Company MAR 30, 2023 NHTSA Recall No. : 23V-223 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : Four Degree Trailer Company Address : 3726 US HWY 34
Kewanee IL 61443
Company phone : 853-3387
Population :
Number of potentially involved : 69 Estimated percentage with defect : NR
Vehicle Information : Vehicle 1 : 2019-2022 LO-LAL IPT-EOT
Vehicle Type : Body Style :
Power Train : NR
Descriptive Information : Warn Industries has decided that a defect which relates to motor vehicle safety exists in the handheld remote-control device that was sold with WARN VR EVO winches. A small number of remotes which have been exposed to or submerged in water have exhibited failures that can result in unintended winch operation, which increases the risk of injury.
65 units are affected Production Dates : JUN 03, 2019 – NOV 29, 2022 VIN Range 1 : Begin : NR End : NR Not sequential
Description of Defect :
Description of the Defect : Remotes which have been exposed to or submerged in water have exhibited failures that can result in unintended winch operation, which increases the risk of injury.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : Unintended winch operation if winch is submerged in water.
Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR Part 573 Safety Recall Report 23V-223
Page 2
The information contained in this report was submitted pursuant to 49 CFR §573
Involved Components : Component Name 1 : NR Component Description : NR Component Part Number : NR
Supplier Identification : Component Manufacturer
Name : Warn Industries Address : 12900 SE Capps Road
Clackamas Oregon 97015
Country : United States
Chronology :
NR
Description of Remedy :
Description of Remedy Program : NR How Remedy Component Differs NR from Recalled Component :
Identify How/When Recall Condition NR was Corrected in Production : Recall Schedule :
Description of Recall Schedule : NR
Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NR – NR
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 23V-223
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Four Degree Trailer Company APR 05, 2023 NHTSA Recall No. : 23V-223 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : Four Degree Trailer Company Address : 3726 US HWY 34
Kewanee IL 61443
Company phone : 309-853-3387
Population :
Number of potentially involved : 65 Estimated percentage with defect : 100 %
Vehicle Information : Vehicle 1 : 2019-2022 LO-LAL IPT-EOT
Vehicle Type : TRAILERS Body Style : OTHER Power Train : NR
Descriptive Information : Warn Industries has decided that a defect which relates to motor vehicle safety exists in the handheld remote-control device that was sold with WARN VR EVO winches. A small number of remotes which have been exposed to or submerged in water have exhibited failures that can result in unintended winch operation, which increases the risk of injury.
65 units are affected Production Dates : JUN 03, 2019 – NOV 29, 2022 VIN Range 1 : Begin : NR End : NR Not sequential
Description of Defect :
Description of the Defect : Remotes which have been exposed to or submerged in water have exhibited failures that can result in unintended winch operation, which increases the risk of injury.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : Unintended winch operation if winch is submerged in water.
Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR Part 573 Safety Recall Report 23V-223 Page 2 Involved Components : Component Name 1 : VR EVO 8 Component Description : Winch Component Part Number : 103250 Supplier Identification : Component Manufacturer
Name : Warn Industries Address : 12900 SE Capps Road
Clackamas Oregon 97015
Country : United States Chronology :
STOP SHIPMENT NOTICE
TO: Warn Distributors FROM: Warn Industries, Inc. DATE: 12/22/2022
RE: WARN VR EVO Stop Shipment Dear Valued Warn Business Partner,
It has recently come to our attention that there is a potential quality issue with the hand-held Remote Control included with the WARN VR EVO line of winches. A small number of Remotes which have been exposed to or submerged in water have exhibited failure. We are investigating this issue and actively developing a solution to remedy the situation. Out of an abundance of caution at this time, we have initiated a stop shipment on the following EVO part numbers from Warn Industries.
103250 VR EVO 8
103251 VR EVO 8-S
103252 VR EVO 10
103253 VR EVO 10-S
103254 VR EVO 12
102355 VR EVO 12-S
104218 S/P Remote & Control Module
As we finalize our solution, we ask that you stop shipment on these part numbers as well. We will provide you with more information regarding the solution as soon as it is available.
Sincerely,
Kyle Shiminski
VP & General Manager The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 23V-223
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Description of Remedy :
Description of Remedy Program : Warn Industries is developing a replacement water-resistant remote
control that it will make available to affected customers, at no charge, when the product is available.
• Warn will replace your existing VR EVO remote with a “corded-only” remote if any internal corrosion is observed when removing the battery pack.
• As compensation for losing the wireless functionality on your existing remote or replacement “corded-only” remote, Warn Industries will provide current VR EVO winch owners with a $100 coupon valid toward the purchase of a new wireless remote product, or any other future purchase on www.warn.com.
• Registration and instructions on how to receive your coupon can be found at: www.warn.com/vr-evo-remote-info. Winch owners will be required to provide verification of battery pack removal and or proof of purchase to receive the coupon.
• The inspection and replacement will take approximately 5 – 10 minutes. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : Warn would need to answer this Warn sent a letter to us on January 6th 2023. Recall Schedule :
Description of Recall Schedule : We will mail recall notices beginning 4/17 if not before. All customers have previously received email notices.
Planned Dealer Notification Date : APR 17, 2023 – MAY 15, 2023
Planned Owner Notification Date : APR 17, 2023 – MAY 15, 2023
* NR – Not Reported
**************************************************************************************************************
SEOCONTENT-END
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.