“This site contains affiliate links for which OEMDTC may be compensated” |
March 31, 2023 NHTSA CAMPAIGN NUMBER: 23E028000
Corrosion on Remote Control Circuit Board
A winch that operates unintentionally increases the risk of injury.
NHTSA Campaign Number: 23E028
Manufacturer Felling Trailers, Inc.
Components ELECTRICAL SYSTEM, EQUIPMENT
Potential Number of Units Affected 6
Summary
Felling Trailers, Inc. (Felling Trailers
) is recalling certain 2022-2023 Felling Trailers
Drop-Deck and 2023 Deck-Over trailers, equipped with a Warn Winch and a wireless handheld remote. Water may enter the handheld remote control for the winch and cause circuit board corrosion, which can allow the winch to operate unintentionally.
Remedy
Felling Trailers will work with Warn Industries, Inc. to provide owners instructions on how to inspect the remote for corrosion and disable the wireless function by removing the battery pack
from the remote. If corrosion or water intrusion is found when removing the battery pack
owners should stop using the remote and contact WARN customer service for a replacement remote, free of charge. Once new parts are available, WARN will make a replacement water resistant remote available, free of charge. Owner notification letters were mailed April 14, 2023. Owners may contact Felling Trailers
customer service at 1-888-335-5464.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
3/13/23 – Was informed via email by NHTSA that their was a recall for this WARN winch.
22E101 Corrosion on Remote Control Circuit Board – WARN VR EVO Winch Wireless/Handheld Remote
22E101 Corrosion on Remote Control Circuit Board – WARN VR EVO Winch Wireless/Handheld Remote
3 Affected Products
Vehicles
MAKE | MODEL | YEAR |
FELLING | DECK-OVER | 2023 |
FELLING | DROP-DECK | 2022-2023 |
5 Associated Documents
Defect Notice 573 Report
RCLRPT-23E028-7519.PDF 214.063KB
Defect Notice 573 Report
RCLRPT-23E028-1161.PDF 214.069KB
Recall Acknowledgement
RCAK-23E028-9454.pdf 645.219KB
Recall 573 Report-Amendment 1 – 04/07/2023
RCLRPT-23E028-9039.PDF 214.56KB
Owner Notification Letter(Part 577)
RCONL-23E028-6421.pdf 204.911KB
Latest Recalls Documents
- Special designed for atv, utv, car, boat, trucks, jeeps, modified vehicles and multi purpose utility trailers
- 6.6hp 12v series wound motor and three-stage planetary gear system with free spooling clutch.85' Length 3/8" Steel rope
- Waterproof and sandproof, state-of-the-art 500AMP Solenoid.Unique clutch brake system, excellent control
- Please confirm the fit of mounting plate before purchase: outline size :(length X width X height) 20.8"X 6.7" X 10"
- Pease read the instruction carefully. The winch can cause short circuits if wiring is wrong. If you have any problems, please feel free to consult with us.
- Unmatched Pulling Power: With a robust 12,000 lb capacity and a powerful 6HP motor, this 12V electric winch effortlessly handles off road recovery, ensuring your always ready.
- High Strength Synthetic Rope: Equipped with 85ft. of 3/8" thick scratch and abrasion-resistant synthetic rope, its lightweight and easier to handle, delivering reliable pulling power without the risk of kinks or fraying.
- Smart Remote Control: Take control from a safe distance with the convenient wired handheld remote controller, ensuring fast and precise winch control.
- Built for the Wild: Built to withstand the elements, this winch features an IP67 rated waterproof housing and sealed components, ensuring optimal performance in any weather or location.
- Everything You Need: Compatible with various bumper and mounting setups, includes battery cables, hawse fairlead, clevis hook, 85' x 3/8" synthetic rope and mounting hardware for easy bolt-on installation.
- POWERFUL MOTOR: The electric winch provides 13,500 lbs/ 6136 kg. of load capacity. 12 Volt DC heavy duty trailer winch with a 4.8kw/6.5HP pure copper permanent magnet series wound motor that ensures reliable performance even in demanding situations. Nilight 12V winch as a second power source for your vehicle, helping to get it out of difficulties such as getting stuck in the mud
- SAFETY & EFFICIENCY: ATV winch with synthetic rope is lighter and stronger than steel winch cable. Waterproof IP68 rating. 265:1 gear reduction ratio and 3 Stage planetary gear system with Sliding Ring Gear Clutch and Auto In Drum Braking for faster linear speed, quiet and reliable traction, corrosion resistant and waterproof to ensure the smooth running of the electric winch during the working process
- PREMIUM MATERIAL: Satin black cast aluminum housing, waterproof powder coated surface and sealed engine effectively isolates rain and moisture, corrosion and UV resistance. With durable 9mm x 24m / 3/8" x 79' synthetic winch rope Heat-treated 12-strand construction, lightweight construction with high tensile strength is strong enough for any outdoor towing operation
- DIMENSION: 13,500 lb 12 volt badlands winch total size: 20.8"x9"x6.3". Fixed bolt pattern:0.43"(10.9 mm). Mounting Pattern:9.97"x4.45"(lease confirm whether the installation plate is suitable before purchase). Fairlead Mounting Pattern: 10"(254mm). Ideal for any outdoor small vehicle ATV UTV Trailer Car Boat Trucks Jeeps Off-Road modified vehicles and multi-purpose trailers
- TWO REMOTE CONTROL OPTIONS: one wired handle control (No additional wiring required) and the other a wireless remote control (range up to 98 feet).the winch’s receiver responds quickly, ensuring that the winch responds quickly when you operate anywhere
- Built for ATVs, UTVs, compact SUVs,off-road vehicles, boats,and trailers.Our compact winches offer both wireless and wired remote control options to suit your needs. Both control modes offer flexibility and convenience, providing double coverage for your vehicle.
- 3 stage planetary gears multiply torque exponentially for heavy loads. Engineered for sustained operation, while auto-brake system locks loads during power outages - to ensure the safety of you and your belongings.
- 12V DC 2.0HP pure copper permanent magnet motor with 166:1 gear ratio, rated at 4,500 lbs pulling force.Matte black finish resists scratches, rust, and corrosion while improve insulation and durability.
- Complete kit includes mounting plate and all necessary hardware.Upgraded solenoid reduces the risk of short circuit: connect yellow/blue wires to winch, red/black to battery. Full installation in under 60 seconds.
- IP67 dust/waterproof,43ft UV-treated nylon rope weighs only 1/4 of steel cable,suitable for wet and low temperature environments.Energy-absorbing stretch prevents snap-back injuries versus steel cable’s whiplash risks.
- With a pull force of more than 3000 pounds, this electric winch delivers a 1.0kw/ 1.3HP 210 amp 12V DC permanent magnet motor with a 153:1 planetary gear system with a fully loaded line speed of 3.3 ft/min and a load free line speed of 1.3 ft/min.
- Waterproof powder coated surface, resistant to corrosion. Durable 3/16" x 32' steel cable is sufficient for any outdoor traction operation.This 12 volt UTV winch includes a choice of steel rope to suit all the different tasks you may have.
- Each lead wire is connected to the corresponding position, the connection is very convenient and fast; 12.63-inch (approx. 32.0 cm) blue (-) and yellow (+) wires are connected to the motor; 68.75 inches (about 172.0 cm) Red (+) wire and black (-) wire Connect to battery (All wires: No. 6) Winch and flat rod, mounting bracket (not included in this product). Using grab blocks helps make your job easier; Another safety tip: Place the blanket on the cable to reduce whipping if it comes loose.
- The winch will include an 18.5 x 13 cm (L x W) universal mounting plate for mounting on the rear of the machine, which will need to be modified to fit with each particular machine, as well as a wireless remote control for the 9.8-11.6 m range, a 1.2 m handlebar rocker, and a 0.6 cm U Hook, chain fly bar,8.0 cm mounting bolt pattern.
- We use the planetary gear system, which can automatically brake, while we want to achieve the highest speed and a certain guarantee to provide safe and reliable power in any situation.
- [ NEW DESIGN]The newly designed model allows you to be the focus of your exploration of the world.The black frosted spray paint with new material will not rust.And it improves the model's thermal insulation and model's durability.The all-steel shell can protect the winch well.The new design is more conducive to the heat dissipation of the gearbox to ensure the long operation of the winch.
- [STRONG POWER]7.2hp 12v series wound motor and three-stage planetary gear system with free spooling clutch.85' Length7/16" Diameter Nlyon rope
- [SPECIAL DESIGNED]Special designed for atv, utv, car, boat, trucks, jeeps, modified vehicles and multi purpose utility trailers
- [POWERFUL PLANETARY GEAR]The real three sets of 3-Stage Planetary enables differential, deceleration (qrowth), reversal, and more. The combined use of multiple groups of planetary wheel systems can achieve a very large speed ratio,which can achieve coaxial deceleration (growth).
- [NEW CONTROL SYSTEM]The new control system will definitely surprise you. The 2-in-1 remote combines wired remote control and infrared remote control power system. The signal control range of the remote controller can reach up to 100ft. Both wired and infrared control have been integrated intio this multifunctional controller
- 5 TON COME ALONG WINCH: Heavy-duty mini
come along five ton come along hand winch cable puller delivers serious pulling power for construction, home, farms, ranch, fences, and automotive use. Max horizontal load capacity of 10,000 pounds.
- WINCH HOOK: Heavy duty puller steel construction for added durability; hooks and gears are zinc plated for a long-lasting life in your garage or workshop when pulling, dragging, lifting, or stretching. Safety latch on all hooks to prevent accidents or slipping off.
- RATCHETING CABLE COME ALONG: Powerful ratcheting come along pulling system allows for one-handed operation when pulling or winching even the heaviest loads. The winch cable ratchet pulley system length is 6mm thick and 3.2 meters or 10 feet long.
- DOUBLE GEAR MANUAL WINCH: Double-gear design locks on for evenly distributed force and easy to gauge notched pulling action for an easy, smooth, and consistent. Max vertical load capacity is also called weight capacity of 2 tons or 4,000 pounds.
- LEVER ARM: Includes long industrial hand ratchet handle with PVC coated grip for leverage and 3 latching hooks for added safety and versatility when going off road vehicle recovery, pulling fences, logs, stumps, or rocks.
- UNMATCHED POWER: Our new winch is built for power and endurance, featuring a 6.0hp/4.5kw pure copper motor that can easily handle up to 13,000 lbs. Designed for demanding tasks, the winch’s motor works in tandem with a 3-stage planetary gear system, providing a precise transmission ratio of 218:1. This combination ensures the strength to recover even the heaviest vehicles with efficiency and stability.
- RELIABLE IP68 WATERPROOF: Engineered to tackle harsh environments, this winch is equipped with an IP68 rating, ensuring it withstands water, dust, and dirt in even the most extreme off-road situations. With this level of protection, you can focus on the adventure ahead, knowing your equipment will perform when you need it most.
- FLEXIBLE CONTROL BOX INSTALLATION: The versatile control box provides up to four different mounting options, thanks to its included mounting plate and brackets, allowing for easy adaptation to various vehicle types. This flexibility ensures that the winch not only performs reliably but also integrates seamlessly into your vehicle, enhancing its rugged look while retaining full functionality.
- DUAL-MODE OPERATION WITH ENHANCED SAFETY: Offering both wired and wireless operation options, this winch provides exceptional flexibility in control. The wired controller features an extended cable, keeping you at a safe distance while operating. For added convenience, the wireless remote boasts an impressive 100ft range, allowing for responsive control from a distance. This dual-mode design not only enhances safety by providing options in varied conditions but also makes it easier to navigate complex recovery scenarios with total control.
- DIMENSIONS & SPECIAL DESIGN: With dimensions of 21” X 6.1” X 7.3” (540 X 158 X 187mm), this winch fits a variety of off-road vehicles and offers an effective solution for diverse recovery situations. Its new black exterior design not only adds a modern and hardcore style to your vehicle, but is also functional and aesthetically pleasing. Built for those who value both utility and aesthetics, this winch blends seamlessly with your vehicle’s look, helping you stand out on any terrain.
- Manufactured in China.Fit Type: Vehicle Specific
- Easy to use
- Highly durable
- Always remove any element or obstacle that may interfere with safe operation of the pulling tool
- No load line speed: 13.8 fpm
- Special designed for atv, utv, car, boat, trucks, jeeps, modified vehicles and multi purpose utility trailers
- Powerful – 2000-lb. rated line pull powered by a 1.0 (12-volt) DC motor
- Pull-and-turn freespooling clutch; Gearing- 1-Stage Planetary,Low-amp, permanent magnet motor; Gear Ratio- 153:1
- Hassle-Free –The roller fairlead creates a safe and smooth pull with the dependable 50-foot galvanized super-duty aircraft cable which is able to withstand abrasive terrain without fraying
- Please read the instruction carefully. The winch can cause short circuits if wiring is wrong. If you have any problems, please feel free to consult with us
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23E-028 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Submission Date : Felling Trailers, Inc. MAR 31, 2023 NHTSA Recall No. : 23E-028 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Felling Trailers
, Inc. Address : 41074 US HWY 71 1525 Main Street South Sauk Centre MN 56378 Company phone : 999 Population : Number of potentially involved : 6 Estimated percentage with defect : 100 % Equipment Information : Brand / Trade 1 : Model : Felling Trailer Various Part No. : Trailer Size : NR Function : NR Descriptive Information : Received notice from vendor(WARN Industries) of a recall on one of their models of winches that we equip on some of our trailers Production Dates : DEC 20, 2021 – NOV 30, 2022 Description of Defect : Description of the Defect : Per WARN Recall Notice 22E-101 ..After investigating field reports of inadvertent activation, Warn determined that getting the remote control wet could result in water ingress and corrosion inside the remote control. This condition could lead to inadvertent activation. It was determined that this condition only affects remote controls with wireless capability that are not water proof. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : Per WARN Recall Notice 22E-101 ..Personal injury if winch operates unexpectedly. No injuries have been reported associated with any product failures. No significant property damage other than the winch system, winch mounting brackets and front bumpers have been reported as a result of corrosion related issues. Part 573 Safety Recall Report 23E-028 Page 2 Description of the Cause : NR Identification of Any Warning that can Occur : Per WARN Recall Notice 22E-101 .The vehicle driver or winch operator may hear the winch motor running when not intended Involved Components : Component Name : VR EVO Winch Component Description : Winch Component Part Number : 103250 Supplier Identification : Component Manufacturer Name : WARN Industries, Inc. Address : 12900 SE Capps Road Clackamas Oregon 97015 Country : United States Chronology : 3/13/23 – Was informed via email by NHTSA that their was a recall for this WARN winch. Description of Remedy : Description of Remedy Program : Contacting owners of the effected units. Collecting contact data and working with WARN to reimburse owners per recall report 22E-101 How Remedy Component Differs from Recalled Component : per recall report 22E-101 .. Removing the battery pack
from the current remote control disables the wireless function controlling the winch, significantly mitigating the hazard. The remote remains fully usable in the corded configuration when physically plugged into the winch. Unplugging the remote from the winch when not in use eliminates the hazard. The new corded-only remote that will be used in reworked existing unsold inventory, will have a new switch face that is visually different from the The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 23E-028 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 current remote. It will not have wireless control functions, including wireless indicator light and mode switch. The internal circuit board will be fully conformal coated and use sealed switches. A new wireless/corded handheld remote is being designed for all new production winches Identify How/When Recall Condition was Corrected in Production : N/A Recall Schedule : Description of Recall Schedule : Calls/emails being sent to dealer effected. Dealers will be in contact with end users. Planned Dealer Notification Date : MAR 31, 2023 – APR 07, 2023 Planned Owner Notification Date : MAR 31, 2023 – APR 07, 2023 Purchaser Information : The following manufacturers purchased this defective/noncompliant equipment for possible use or installation in new motor vehicles or new items of motor vehicle equipment: Name : NR Address : NR NR Country : NR Company Phone : NR * NR – Not Reported
**************************************************************************************************************
IMPORTANT SAFETY RECALL This notice applies to your trailer, see VIN below NHTSA Recall No. 23E028 and 22E101 April 10th, 2023 Re: Recall on Felling Trailers Equipped with certain Warn Winches To Whom It May Concern This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Felling Trailers
, based on information provided by WARN, has decided that a defect, which relates to motor vehicle safety, exists in certain 2022-2023 Drop-Deck and 2023 Deck-Over trailers equipped with WARN branded winch. Felling Trailer Model # _______________ Vin #________________________________ Description of defect: Water may enter the handheld remote control for the winch and cause circuit board corrosion, which can allow the winch to operate unintentionally, which increases the risk of injury. Description of Remedy: • Disable wireless function (see instructions below). • Warn will offer $100 coupon from WARN as compensation for lack of wireless function. • Warn will offer a new corded-only remote if current remote shows evidence of corrosion. Disabling Wireless function: Remove battery pack
from current remote. This will disable wireless function of remote, significantly mitigating the hazard. The remote will remain functional in the corded configuration when physically plugged into the winch. Unplugging the remote from the winch when not in use eliminates the hazard. Please email or call Scott Brown to request coupon and/or new corded remote. If you are unable receive the remedy for this defect without charge, or within a reasonable amount of time, you may submit a written complaint to: Administrator National Highway Traffic Safety Administration 1200 New Jersey AVE SE Washington, DC 20590 You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov. Federal law requires that you forward a copy of this safety recall notice to the lessee within 10 days. Regards, Scott Brown Warranty Manager – Felling Trailers
– scott.brown@felling.com – 320-351-1299
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23E-028 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Felling Trailers, Inc. Submission Date : APR 07, 2023 NHTSA Recall No. : 23E-028 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Felling Trailers
, Inc. Address : 41074 US HWY 71 1525 Main Street South Sauk Centre MN 56378 Company phone : 999 Population : Number of potentially involved : 6 Estimated percentage with defect : 100 % Equipment Information : Brand / Trade 1 : Felling Trailer Model : FT Part No. : FT-IT-I Size : NR Function : NR Descriptive Information : Received notice from vendor(WARN Industries) of a recall on one of their models of winches that we equip on some of our trailers Production Dates : DEC 20, 2021 – NOV 30, 2022 Brand / Trade 2 : Felling Model : FT Part No. : FT- IT-I (Tilt) Size : NR Function : NR Descriptive Information : Specific records were kept that identified 6 trailers that had this specific part from WARN that are subject to the recall. Production Dates : DEC 19, 2021 – SEP 20, 2022 Part 573 Safety Recall Report 23E-028 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Description of Defect : Description of the Defect : Per WARN Recall Notice 22E-101 ..After investigating field reports of inadvertent activation, Warn determined that getting the remote control wet could result in water ingress and corrosion inside the remote control. This condition could lead to inadvertent activation. It was determined that this condition only affects remote controls with wireless capability that are not water proof. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : Per WARN Recall Notice 22E-101 ..Personal injury if winch operates unexpectedly. No injuries have been reported associated with any product failures. No significant property damage other than the winch system, winch mounting brackets and front bumpers have been reported as a result of corrosionrelated issues. Description of the Cause : NR Identification of Any Warning that can Occur : Per WARN Recall Notice 22E-101 .The vehicle driver or winch operator may hear the winch motor running when not intended Involved Components : Component Name : VR EVO Winch Component Description : Winch Component Part Number : 103250 Supplier Identification : Component Manufacturer Name : WARN Industries, Inc. Address : 12900 SE Capps Road Clackamas Oregon 97015 Country : United States Part 573 Safety Recall Report 23E-028 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Chronology : 3/13/23 – Was informed via email by NHTSA that their was a recall for this WARN winch. Description of Remedy : Description of Remedy Program : Contacting owners of the effected units. Collecting contact data and working with WARN to reimburse owners per recall report 22E-101 How Remedy Component Differs from Recalled Component : per recall report 22E-101 .. Removing the battery pack
from the current remote control disables the wireless function controlling the winch, significantly mitigating the hazard. The remote remains fully usable in the corded configuration when physically plugged into the winch. Unplugging the remote from the winch when not in use eliminates the hazard. The new corded-only remote that will be used in reworked existing unsoldinventory, will have a new switch face that is visually different from the current remote. It will not have wireless control functions, including wireless indicator light and mode switch. The internal circuit board will be fully conformal coated and use sealed switches. A new wireless/corded handheld remote is being designed for all new production winches Identify How/When Recall Condition was Corrected in Production : N/A Recall Schedule : Description of Recall Schedule : Calls/emails being sent to dealer effected. Dealers will be in contact with end users. Planned Dealer Notification Date : MAR 31, 2023 – APR 07, 2023 Planned Owner Notification Date : MAR 31, 2023 – APR 07, 2023 Purchaser Information : The following manufacturers purchased this defective/noncompliant equipment for possible use or installation in new motor vehicles or new items of motor vehicle equipment: Name : NR Address : NR NR Country : NR Company Phone : NR Part 573 Safety Recall Report 23E-028 Page 4 The information contained in this report was submitted pursuant to 49 CFR §573 * NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.