“This site contains affiliate links for which OEMDTC may be compensated” |
May 18, 2023 NHTSA CAMPAIGN NUMBER: 23V357000
Strobe Lights May Short and Cause Fire
An electrical short-circuit can increase the risk of a fire.
NHTSA Campaign Number: 23V357
Manufacturer Altec Industries, Inc.
Components EQUIPMENT
Potential Number of Units Affected 5,143
Summary
Altec Industries, Inc. (Altec) is recalling certain 2021-2023 Aerial Devices, Digger Derricks, Service Bodies and Cranes. Water can leak into the strobe lights, which could cause an electrical short-circuit.
Remedy
Altec will provide instructions to inspect the light assembly for moisture and install a new fuse. If moisture is found or the light is inoperative, a light replacement kit will be installed. Repairs will be performed free of charge. Owner notification letters are expected to be mailed July 14, 2023. Owners may contact Altec’s customer service at 1-877-462-5832. Altec’s number for this recall is CSN 3079.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
In December 2022, a customer reported that a strobe light on the unit had caused a thermal event that caused damage to the unit body and other components around the strobe light. Altec investigated the incident and found an electrical arc witness mark and moisture inside the lens. The subject strobe light was returned to the manufacturer for evaluation.
On February 6, 2023, a second customer notified Altec of a similar thermal event involving the same strobe light part number in the December incident. Around March 10, 2023, an additional customer reported a similar incident. All subject strobe lights were returned to the supplier for evaluation.
On March 14, 2023, Altec opened a potential field action investigation and worked with the supplier to determine the root cause of the light failures and the potential affected population of strobe lights installed on Altec units. On May 12, 2023, after reviewing Altec’s and TecNiq’s investigation results, Altec determined that a defect could exist on Altec units with the subject part number strobe light installed. There were no other warranty claims or field reports identified. There have been no accidents, injuries, or deaths related to this issue.
12 Affected Products
Vehicles
MAKE | MODEL | YEAR |
ALTEC | AERIAL DEVICE | 2021-2023 |
ALTEC | DIGGER DERRICK![]() | 2021-2023 |
ALTEC | EFFER CRANE | 2021-2023 |
ALTEC | SERVICE BODY | 2021-2023 |
2 Associated Documents
Defect Notice 573 Report
RCLRPT-23V357-5802.PDF 214.935KB
Recall Acknowledgement
RCAK-23V357-7512.pdf 645.963KB
Latest Recalls Documents
“This site contains affiliate links for which OEMDTC may be compensated” |
- 【MORE LEDS, MORE FOCUS, MORE BRIGHTNESS】: HLauto 1002L traffic advisor strobe light bar is designed with 40 high-intensity LEDs and PS magnifying lens, making it brighter than the other 24 LEDs traffic advisor strobe light bars. Ensuring your safety in any driving conditions
- 【EASY TO INSTALL】: Equipped with 4 and 90° adjustable strong and stability suction cups brackets, 8 strong suction cups, and 16.4ft long cable, you can easily install this 2 in 1 windshield emergency strobe lights on your rear/front windshield, and exterior of vehicles
- 【26 FLASHING PATTERNS WITH LAST MEMORY RECALL】: Just plug in the 12V cigarette lighter, and choose the strobe mode you need. This LED strobe light bar can be widely used for Hazards Warning, EMS, Law Enforcement, First Responders, Emergency Vehicles, Construction Vehicles, Police, Tow/Work Truck, Snowplow, Postal and City Service Workers, etc
- 【BUILD TO LAST】: HLauto 1002L emergency warning lights bar is made of heavy-duty aluminum housing for superior heat dissipation. IP67 Water-resistant rating, great for withstand various weather conditions, such as rain, fog, dust storms, snow, mud, and wind seasons, making the light visible from thousands of feet away. Lifespan up to 50,000 Hours
- 【FOR YOUR RIGHTS】: HLauto emergency strobe lights for vehicles come with a 2-year honor and 24-hour service. Please directly contact us through your Order Number or User Manual
- 【SUPER VISIBILITY】ASPL 8Pcs 12LED Surface Mount Strobe Lights, each light has a total of 12 high-intensity Led chips. Use aluminum alloy housing + ABS
magnifying lens for maximum brightness to ensure more effective warning to other vehicles. These strobe lights can be seen from hundreds of feet away.
- 【HIGH QUALITY】These lights can withstand harsh weather conditions, waterproof with IP67 and over 50,000 hours life span because of the better production process. Great to use in rain, fog, dust and snow, moisture-proof and vibration-proof, escorting your driving.
- 【ADDED AYNC WIRE】Upgraded the synchronization function. If sync is required, just connect white wires of all lights together. RED --- +VDC. BLACK --- To Chassis Ground. YELLOW --- Pattern Selection. Yellow wire touches black for less than 1s to the next mode.
- 【EASY TO INSTALL】Ultra-thin design is easy to install. Supplied with gaskets and screws to mount it to the grille or bumper. Universal for 12-24V all vehicles and can be installed in every position of vehicle.
- 【17 FLASHING MODES】Built in flasher, and the last used pattern recall/memory function. 17 select-able flashing patterns, including Steady on, Single flash, Double flash, etc.
- UPGRADED -- ASPL Roof top strobe light bar use 48 high-intensity LED chips with magnifying lens to maximize light output and ensure more effective warning to other vehicles. At the same time upgrade the material, waterproof performance, cable length, magnet. Make the light not only bright, but also more durable.
- EASY TO INSTALL -- 2 x 7 strong magnets with larger thick rubber suction cups, more stable than other 2 x 5 magnets. Very quick to mount without hurting the roof of your vehicles, as well as adding strength on attachment. 16.4 ft heavy duty cable and 12-24V plug and play, long enough to install the light anywhere of the vehicle.
- FLASH PATTERN -- Double switch buttons setting, 16 Patterns to choose from. You can switch ON/OFF or select the flashing mode conveniently at the cigarette lighter plug buttons. Last used pattern recall/memory function.
- HIGH PERFORMANCE -- Integrated heatsink, and anti-condensation drain port, good improved the problem of water vapor condensation inside the light. Completely Waterproofed, Strong fog penetrability and dust-proof and corrosion resistant.Lifespan up to 50,000 Hours.
- This rooftop strobe light bar is a great choice for firefighter, snow plowing, safety warning, emergency vehicles, utility workers, postal service, construction vehicle, etc.
- 🚘【STAY VISIBLE. DRIVE SAFE】: HLauto 2x16.8" dash strobe flashing lights are designed with 48 high-brightness LEDs and upgraded 4D lens, making it brighter than the other 32 LED strobe light bars. Keep your vehicle visible to ensure your driving safety
- 🚘【EASY TO INSTALL】: With adjustable brackets, 10 suction cups, and 13.12ft long cable, you can easily place these dash strobe lights on the window and install them on the front windshield or rear window
- 🚘【QUICKLY RESPONDER】: Just plug in the 12V or 24V cigarette lighter, and choose the strobe mode you need. This visor light bar has 20 flashing modes with last memory recall. Great for security, construction safety warnings, police, and law enforcement vehicles, etc.
- 🚘【STURDY AND LONGER LASTING】: Exterior consists of ABS
housing and aluminum alloy bracket to endure all kinds of weather conditions, this LED strobe light will not melt in the sun like many inferior dash lights.
- 🚘【FOR YOUR RIGHTS】: HLauto emergency strobe lights bar come with a 2-year honor and 24-hour service. Please feel free to contact us through your Order Number or User Manual
- UPGRADED -- ASPL Roof top strobe light bar use 48 high-intensity LED chips with magnifying lens to maximize light output and ensure more effective warning to other vehicles. At the same time upgrade the material, waterproof performance, cable length, magnet. Make the light not only bright, but also more durable.
- EASY TO INSTALL -- 2 x 7 strong magnets with larger thick rubber suction cups, more stable than other 2 x 5 magnets. Very quick to mount without hurting the roof of your vehicles, as well as adding strength on attachment. 16.4 ft heavy duty cable and 12-24V plug and play, long enough to install the light anywhere of the vehicle.
- FLASH PATTERN -- Double switch buttons setting, 16 Patterns to choose from. You can switch ON/OFF or select the flashing mode conveniently at the cigarette lighter plug buttons. Last used pattern recall/memory function.
- HIGH PERFORMANCE -- Integrated heatsink, and anti-condensation drain port, good improved the problem of water vapor condensation inside the light. Completely Waterproofed, Strong fog penetrability and dust-proof and corrosion resistant.Lifespan up to 50,000 Hours.
- This rooftop strobe light bar is a great choice for firefighter, snow plowing, safety warning, emergency vehicles, utility workers, postal service, construction vehicle, etc.
- 【MAKE YOU STAND OUT】This 2 in 1 led grill lights strip are equipped with 288 high brightness LEDs. Even during the daytime, the truck lights are bright and noticeable to the driver and effective for any warnings and emergencies.
- 【HIGH-QUALITY】This truck strobe lights is well-made and lightweight, low consumption, and a service life of 50,000 hours. The clear plastic tube is completely sealed for safe use in harsh weather. Whole led strobe lights strip is IP67 waterproof.
- 【QUICK RESPONSE】Just plug in the 12V cigarette lighter switch, and control the strobe mode you need through the cigarette lighter switch, with memory function. 29 different flashing patterns , very handy for late night calls, first responder, storm work or danger.
- 【EASY TO INSTALL】No need to drill, just clean the mounted grille/tailgate/rear window surface and peel and stick the strobe strip lights for installation. Strong adhesive and cable ties ensure stable installation. Even driving through lots of rain, highway speeds, potholes, the caution lights can still stay on and work great.
- 【WIDELY APPLICATION】The 2 x 24 inch amber and white strobe lights strips widely used for Hazard Warning, Law Enforcement, First Responder, emergency vehicles and tow trucks, construction vehicles, police, EMS, security, snow plow, postal workers, etc.( If you need to hardwire the strip, please refer to the hardwired control box, ASIN:B0D6G6DJ1F)
- 【SUPER VISIBILITY】ASPL 29.5”emergency strobe light is designed with 54 high intensity LEDS, Bright enough for day use. Both the front and back of the light have SIX groups of LEDs, and both left and right sides one. This unique design not only meets higher brightness needs but also warns other vehicles more effectively.
- 【EASY TO INSTALL】4 x 7 strong magnets with larger thick rubber suction cups, more stable than other 4 x 4 magnets. Very quick to mount without hurting the roof of your vehicles, as well as adding strength on attachment. 16.4 ft heavy duty cable and 12-24V plug and play, long enough to install the light anywhere of the vehicle.
- 【26 FLASHING MODES】Double switch buttons setting, 26 Patterns to choose from. You can switch ON/OFF or select the flashing mode conveniently at the cigarette lighter plug buttons. Last used pattern recall/memory function.
- 【HIGH QUALITY】 Made of durable aluminum material, waterproof with IP67, over 50,000 hours life span. Great to use in rain, fog, dust, and snow weather, resisting moisture and vibration, escorting your driving.
- 【FEATURES】29.5"L x 8.1"W x 3.7"H. Power: 54W. High-Power: 1W / LED Working at DC12-24V.This rooftop strobe light bar is a great choice for firefighter, snow plowing, safety warning, emergency vehicles, utility workers, postal service, construction vehicle, etc.
- Enough to Use: you will receive 20 packs of LED emergency strobe lights, adopting waterproof design, made of quality aluminum alloy housing, with heat dissipation ability; The high transmission PC lens can offer optimum protection, not easy to break or deform, can be applied in most harsh environments
- Easy to Install: the LED warning emergency flashing lights have 2 lighting modes, including constantly mode and strobe mode, the red wire cable is connected to the positive pole, the black wire cable is connected to the negative pole, and the yellow wire cable is connected to the positive change flashing mode; When the yellow wire touches the red wire, the mode will be changed, when the yellow wire is released, the mode is fixed
- High Bright LED Light: the bright LED strobe lights are designed with 6 pieces of high intensity LED chips, can improve the overall visibility, which are much brighter than the standard LED strobe lights, can ensure your driving safe during the day and night
- 2 Flashing Patterns: the LED strobe lights have 2 different flashing patterns, include constant mode and directional flash patterns, designed with low power consumption, fast start up speed, fast heat dissipation, adding a stylish overall look to your vehicle and making it eye catching
- Various Applications: the LED strobe lights are suitable for most vehicles with 12-24V power source, such as truck, SUV, pickup, off road vehicle, ATV, engineering vehicles, emergency vehicles, firefighter vehicles, construction vehicle and more
- 🚘【MORE LEDS, MORE FOCUS, MORE BRIGHTNESS】: HLauto 2 in 1 emergency strobe lights are designed with 48 high-brightness LEDs and upgraded 4D lens, making it brighter than the other 16 LED strobe light bars. Keep your vehicle visible to ensure your driving safety
- 🚘【QUICKLY RESPONDER】: Just plug in the 12V cigarette lighter, and choose the strobe mode you need. This emergency vehicle lights has 26 flashing modes, including pulsing, alternating, to alert everyone to your presence. Includes last pattern memory recall.
- 🚘【EASY TO INSTALL】: With adjustable brackets, 6 suction cups, and 9.84ft long cable, you can easily place these dash strobe lights on the window and install on the windshield or rear window. No need to drill holes. The length of the wire from light to light is 4.92FT.
- 🚘【STURDY AND LONGER LASTING】: Exterior consists of ABS
housing and aluminum alloy bracket to endure all kinds of weather conditions. Lifespan over 50,000 hour. Perfect for use in fog, rainy, snowy, muddy and windy season and ideal for emergency situations,.
- 🚘【WIDELY APPLICATION】: The emergency light bar widely used for Hazard Warning, Law Enforcement, First Responder, emergency vehicles and trucks, construction vehicles, police car, EMS, security, snowplow, postal workers, storm work, fire POV, etc.
- SUPER VISIBILITY -- 8Pcs Surface Mount Strobe Lights are consists of 4pcs single row 12 LED chips and 4pcs double row 24 LED chips, this LED emergency dash light projects brilliantly bright illumination during the day and nighttime.
- Sync Feature Strobe Controller -- 2 switch button setting, easy to control. You have a total of 12 flash modes, including pulsing, alternating, synchronized flashing, Keep it on brighting. (Last pattern recall/memory function).
- Applications -- It is great for emergency vehicles, postal service, snowplow, construction vehicle, volunteer cars, firefighter, EMS, safety warning or any 12V-24V vehicles. It can be mounted on the side of truck or the grille in front of the vehicle.
- HIGH QUALITY -- Exterior consists of aluminum alloy housing and PC Lens Material to endure all kinds of weather conditions, this LED strobe light will not melt in sun like many inferior dash lights.
- EASY INSTALLATION -- This emergency strobe lights with main control box for free wiring installation, it can perfectly synchronized your lights. 11.5 ft long wire of each raw of light can meet the installation needs of various large vehicles. Protective mounting gaskets and screws are included for easy installation.
Last update on 2025-06-10 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-357 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Altec Industries, Inc. Submission Date : MAY 18, 2023 NHTSA Recall No. : 23V-357 Manufacturer Recall No. : CSN 3079 Manufacturer Information : Manufacturer Name : Altec Industries, Inc. Address : 210 Inverness Center Drive Birmingham AL 35242 Company phone : 205 991 7733 Population : Number of potentially involved : 5,143 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2021-2023 Altec Aerial Device, Digger Derricks, Service Bodies, Cranes, Vehicle Type : Body Style : Power Train : NR Descriptive Information : Altec determined the recall population using dates for the affected components list provided by the supplier and a review of production records. Production Dates : MAY 03, 2021 – MAR 03, 2023 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : Water can leak into the sealed strobe light enclosure shorting the internal electronics of the light. If the light shorts the included fuse may be too large to open. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : A short in the light assembly increases the risk of a thermal event and fire to the unit and other materials in the area. Description of the Cause : NR Identification of Any Warning that can Occur : A pre-operational inspection could identify moisture in the light housing. There is no warning of incorrect circuit protection for the light assembly. Involved Components : Part 573 Safety Recall Report 23V-357 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : Light, Strobe, Amber LED, Clear Lens, 12V, .275 A Component Description : Light, Strobe, Amber LED, Clear Lens, 12V, .275 A Component Part Number : 991313410 Component Name 2 : Light, Strobe, Amber LED, Amber Lens, 12V, .275 A Component Description : Light, Strobe, Amber LED, Amber Lens, 12V, .275 A Component Part Number : 991441134 Component Name 3 : Light, Strobe, Amber LED, Clear Lens, 12V, .275 A Component Description : Light, Strobe, Amber LED, Clear Lens, 12V, .275 A Component Part Number : 991331818 Component Name 4 : Light, Strobe, Blue LED, Clear Lens, 12V, .275 A Component Description : Light, Strobe, Blue LED, Clear Lens, 12V, .275 A Component Part Number : 991342343 Component Name 5 : Light, Strobe, Red LED, Clear Lens, 12V, .275 A Component Description : Light, Strobe, Red LED, Clear Lens, 12V, .275 A Component Part Number : 991386989 Component Name 6 : Light, Strobe, Red LED, Red Lens, 12V, .275 A Component Description : Light, Strobe, Red LED, Red Lens, 12V, .275 A Component Part Number : 991372884 Supplier Identification : Component Manufacturer Name : TecNiq Address : 9100 E Michigan Ave Galesburg Michigan 49053 Part 573 Safety Recall Report 23V-357 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Country : United States Chronology : In December 2022, a customer reported that a strobe light on the unit had caused a thermal event that caused damage to the unit body and other components around the strobe light. Altec investigated the incident and found an electrical arc witness mark and moisture inside the lens. The subject strobe light was returned to the manufacturer for evaluation. On February 6, 2023, a second customer notified Altec of a similar thermal event involving the same strobe light part number in the December incident. Around March 10, 2023, an additional customer reported a similar incident. All subject strobe lights were returned to the supplier for evaluation. On March 14, 2023, Altec opened a potential field action investigation and worked with the supplier to determine the root cause of the light failures and the potential affected population of strobe lights installed on Altec units. On May 12, 2023, after reviewing Altec’s and TecNiq’s investigation results, Altec determined that a defect could exist on Altec units with the subject part number strobe light installed. There were no other warranty claims or field reports identified. There have been no accidents, injuries, or deaths related to this issue. Description of Remedy : Description of Remedy Program : Altec will issue CSN 3079 to affected unit owners requiring owners to inspect the light assembly for moisture and update the circuit with a lower amperage fuse. The lights will be replaced if water is present in the light assembly, or the light is not working. If there is no water in the light assembly, the lights will not need to be replaced. The needed replacement kit will be provided by Altec free of charge. The Altec Warranty Policy covers the recall remedy, including cases requiring reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall. How Remedy Component Differs from Recalled Component : The remedy light circuit will have a lower amperage rating and will open if a short in the light occurs and the replacement lights have an updated design to reduce the risk of water intrusion. Identify How/When Recall Condition was Corrected in Production : The updated strobe light design was implemented, and the circuit fuse was changed to a smaller fuse in production on March 23, 2023. Recall Schedule : Description of Recall Schedule : Altec will issue CSN 3079 to the owners of the affected units. Altec does not have a dealer network and issues letters to owners only. Planned Dealer Notification Date : JUL 14, 2023 – JUL 14, 2023 Part 573 Safety Recall Report 23V-357 Page 4 The information contained in this report was submitted pursuant to 49 CFR §573 Planned Owner Notification Date : JUL 14, 2023 – JUL 14, 2023 * NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END