“This site contains affiliate links for which OEMDTC may be compensated” |
July 31, 2023 NHTSA CAMPAIGN NUMBER: 23V536000
Corrosion on Winch Remote Control Circuit Board
A winch that operates unintentionally increases the risk of injury.
NHTSA Campaign Number: 23V536000
Manufacturer Rosenbauer America
Components EQUIPMENT, ELECTRICAL SYSTEM
Potential Number of Units Affected 13
Summary
Rosenbauer America (Rosenbauer
) is recalling certain 2020-2022 Commercial F-550, 2022 Commercial M2-106, M2-112, Commercial 567, 2021 Commander, and Avenger vehicles equipped with certain Warn Industries VR EVO winches with a wireless handheld remote. Water may enter the handheld remote control for the winch and cause circuit board corrosion, which can allow the winch to operate unintentionally.
Remedy
Rosenbauer will notify owners and provide instructions for inspecting the remote for corrosion, disabling the wireless function, and ordering a new wired remote if necessary, free of charge. Owner notification letters are expected to be mailed August 29, 2023. Owners may contact Rosenbauer
customer service at 1-651-462-1000.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
3/13/2023: NHTSA contacted Rosenbauer to verify that we would submit a recall. Warn identified Rosenbauer
as a buyer of the recalled winches but Rosenbauer
was experiencing problems with their email server at that time and did not receive the email.
3/30/2023: NHTSA contacted Rosenbauer again to verify but our email was still down.
At this time nor before March 2023, we did not receive any notification from Warn either.
7/24/2023: NHTSA contacted Rosenbauer for an update and the email was received.
7/25/2023: Rosenbauer contacted Warn for PO information.
7/26/2023: Warn sent the list of recall winches with Rosenbauer’s PO number.
7/28/2023: Rosenbauer finalized the list by tying the recalled winches to a VIN.
7/31/2023: Recall was filed.
8 Affected Products
Vehicles
MAKE | MODEL | YEAR |
ROSENBAUER![]() | AVENGER | 2021 |
ROSENBAUER![]() | COMMANDER | 2021 |
ROSENBAUER![]() | COMMERCIAL 567 | 2022 |
ROSENBAUER![]() | COMMERCIAL F-550 | 2020-2022 |
ROSENBAUER![]() | COMMERCIAL M2-106 | 2022 |
ROSENBAUER![]() | COMMERCIAL M2-112 | 2022 |
2 Associated Documents
Recall Acknowledgement
RCAK-23V536-1867.pdf 694.735KB
Defect Notice 573 Report
RCLRPT-23V536-7515.PDF 220.661KB
Latest Recalls Documents
- Special designed for atv, utv, car, boat, trucks, jeeps, modified vehicles and multi purpose utility trailers
- 6.6hp 12v series wound motor and three-stage planetary gear system with free spooling clutch.85' Length 3/8" Steel rope
- Waterproof and sandproof, state-of-the-art 500AMP Solenoid.Unique clutch brake system, excellent control
- Please confirm the fit of mounting plate before purchase: outline size :(length X width X height) 20.8"X 6.7" X 10"
- Pease read the instruction carefully. The winch can cause short circuits if wiring is wrong. If you have any problems, please feel free to consult with us.
- Unmatched Pulling Power: With a robust 12,000 lb capacity and a powerful 6HP motor, this 12V electric winch effortlessly handles off road recovery, ensuring your always ready.
- High Strength Synthetic Rope: Equipped with 85ft. of 3/8" thick scratch and abrasion-resistant synthetic rope, its lightweight and easier to handle, delivering reliable pulling power without the risk of kinks or fraying.
- Smart Remote Control: Take control from a safe distance with the convenient wired handheld remote controller, ensuring fast and precise winch control.
- Built for the Wild: Built to withstand the elements, this winch features an IP67 rated waterproof housing and sealed components, ensuring optimal performance in any weather or location.
- Everything You Need: Compatible with various bumper and mounting setups, includes battery cables, hawse fairlead, clevis hook, 85' x 3/8" synthetic rope and mounting hardware for easy bolt-on installation.
- POWERFUL MOTOR: The electric winch provides 13,500 lbs/ 6136 kg. of load capacity. 12 Volt DC heavy duty trailer winch with a 4.8kw/6.5HP pure copper permanent magnet series wound motor that ensures reliable performance even in demanding situations. Nilight 12V winch as a second power source for your vehicle, helping to get it out of difficulties such as getting stuck in the mud
- SAFETY & EFFICIENCY: ATV winch with synthetic rope is lighter and stronger than steel winch cable. Waterproof IP68 rating. 265:1 gear reduction ratio and 3 Stage planetary gear system with Sliding Ring Gear Clutch and Auto In Drum Braking for faster linear speed, quiet and reliable traction, corrosion resistant and waterproof to ensure the smooth running of the electric winch during the working process
- PREMIUM MATERIAL: Satin black cast aluminum housing, waterproof powder coated surface and sealed engine effectively isolates rain and moisture, corrosion and UV resistance. With durable 9mm x 24m / 3/8" x 79' synthetic winch rope Heat-treated 12-strand construction, lightweight construction with high tensile strength is strong enough for any outdoor towing operation
- DIMENSION: 13,500 lb 12 volt badlands winch total size: 20.8"x9"x6.3". Fixed bolt pattern:0.43"(10.9 mm). Mounting Pattern:9.97"x4.45"(lease confirm whether the installation plate is suitable before purchase). Fairlead Mounting Pattern: 10"(254mm). Ideal for any outdoor small vehicle ATV UTV Trailer Car Boat Trucks Jeeps Off-Road modified vehicles and multi-purpose trailers
- TWO REMOTE CONTROL OPTIONS: one wired handle control (No additional wiring required) and the other a wireless remote control (range up to 98 feet).the winch’s receiver responds quickly, ensuring that the winch responds quickly when you operate anywhere
- Built for ATVs, UTVs, compact SUVs,off-road vehicles, boats,and trailers.Our compact winches offer both wireless and wired remote control options to suit your needs. Both control modes offer flexibility and convenience, providing double coverage for your vehicle.
- 3 stage planetary gears multiply torque exponentially for heavy loads. Engineered for sustained operation, while auto-brake system locks loads during power outages - to ensure the safety of you and your belongings.
- 12V DC 2.0HP pure copper permanent magnet motor with 166:1 gear ratio, rated at 4,500 lbs pulling force.Matte black finish resists scratches, rust, and corrosion while improve insulation and durability.
- Complete kit includes mounting plate and all necessary hardware.Upgraded solenoid reduces the risk of short circuit: connect yellow/blue wires to winch, red/black to battery. Full installation in under 60 seconds.
- IP67 dust/waterproof,43ft UV-treated nylon rope weighs only 1/4 of steel cable,suitable for wet and low temperature environments.Energy-absorbing stretch prevents snap-back injuries versus steel cable’s whiplash risks.
- With a pull force of more than 3000 pounds, this electric winch delivers a 1.0kw/ 1.3HP 210 amp 12V DC permanent magnet motor with a 153:1 planetary gear system with a fully loaded line speed of 3.3 ft/min and a load free line speed of 1.3 ft/min.
- Waterproof powder coated surface, resistant to corrosion. Durable 3/16" x 32' steel cable is sufficient for any outdoor traction operation.This 12 volt UTV winch includes a choice of steel rope to suit all the different tasks you may have.
- Each lead wire is connected to the corresponding position, the connection is very convenient and fast; 12.63-inch (approx. 32.0 cm) blue (-) and yellow (+) wires are connected to the motor; 68.75 inches (about 172.0 cm) Red (+) wire and black (-) wire Connect to battery (All wires: No. 6) Winch and flat rod, mounting bracket (not included in this product). Using grab blocks helps make your job easier; Another safety tip: Place the blanket on the cable to reduce whipping if it comes loose.
- The winch will include an 18.5 x 13 cm (L x W) universal mounting plate for mounting on the rear of the machine, which will need to be modified to fit with each particular machine, as well as a wireless remote control for the 9.8-11.6 m range, a 1.2 m handlebar rocker, and a 0.6 cm U Hook, chain fly bar,8.0 cm mounting bolt pattern.
- We use the planetary gear system, which can automatically brake, while we want to achieve the highest speed and a certain guarantee to provide safe and reliable power in any situation.
- [ NEW DESIGN]The newly designed model allows you to be the focus of your exploration of the world.The black frosted spray paint with new material will not rust.And it improves the model's thermal insulation and model's durability.The all-steel shell can protect the winch well.The new design is more conducive to the heat dissipation of the gearbox to ensure the long operation of the winch.
- [STRONG POWER]7.2hp 12v series wound motor and three-stage planetary gear system with free spooling clutch.85' Length7/16" Diameter Nlyon rope
- [SPECIAL DESIGNED]Special designed for atv, utv, car, boat, trucks, jeeps, modified vehicles and multi purpose utility trailers
- [POWERFUL PLANETARY GEAR]The real three sets of 3-Stage Planetary enables differential, deceleration (qrowth), reversal, and more. The combined use of multiple groups of planetary wheel systems can achieve a very large speed ratio,which can achieve coaxial deceleration (growth).
- [NEW CONTROL SYSTEM]The new control system will definitely surprise you. The 2-in-1 remote combines wired remote control and infrared remote control power system. The signal control range of the remote controller can reach up to 100ft. Both wired and infrared control have been integrated intio this multifunctional controller
- 5 TON COME ALONG WINCH: Heavy-duty mini
come along five ton come along hand winch cable puller delivers serious pulling power for construction, home, farms, ranch, fences, and automotive use. Max horizontal load capacity of 10,000 pounds.
- WINCH HOOK: Heavy duty puller steel construction for added durability; hooks and gears are zinc plated for a long-lasting life in your garage or workshop when pulling, dragging, lifting, or stretching. Safety latch on all hooks to prevent accidents or slipping off.
- RATCHETING CABLE COME ALONG: Powerful ratcheting come along pulling system allows for one-handed operation when pulling or winching even the heaviest loads. The winch cable ratchet pulley system length is 6mm thick and 3.2 meters or 10 feet long.
- DOUBLE GEAR MANUAL WINCH: Double-gear design locks on for evenly distributed force and easy to gauge notched pulling action for an easy, smooth, and consistent. Max vertical load capacity is also called weight capacity of 2 tons or 4,000 pounds.
- LEVER ARM: Includes long industrial hand ratchet handle with PVC coated grip for leverage and 3 latching hooks for added safety and versatility when going off road vehicle recovery, pulling fences, logs, stumps, or rocks.
- UNMATCHED POWER: Our new winch is built for power and endurance, featuring a 6.0hp/4.5kw pure copper motor that can easily handle up to 13,000 lbs. Designed for demanding tasks, the winch’s motor works in tandem with a 3-stage planetary gear system, providing a precise transmission ratio of 218:1. This combination ensures the strength to recover even the heaviest vehicles with efficiency and stability.
- RELIABLE IP68 WATERPROOF: Engineered to tackle harsh environments, this winch is equipped with an IP68 rating, ensuring it withstands water, dust, and dirt in even the most extreme off-road situations. With this level of protection, you can focus on the adventure ahead, knowing your equipment will perform when you need it most.
- FLEXIBLE CONTROL BOX INSTALLATION: The versatile control box provides up to four different mounting options, thanks to its included mounting plate and brackets, allowing for easy adaptation to various vehicle types. This flexibility ensures that the winch not only performs reliably but also integrates seamlessly into your vehicle, enhancing its rugged look while retaining full functionality.
- DUAL-MODE OPERATION WITH ENHANCED SAFETY: Offering both wired and wireless operation options, this winch provides exceptional flexibility in control. The wired controller features an extended cable, keeping you at a safe distance while operating. For added convenience, the wireless remote boasts an impressive 100ft range, allowing for responsive control from a distance. This dual-mode design not only enhances safety by providing options in varied conditions but also makes it easier to navigate complex recovery scenarios with total control.
- DIMENSIONS & SPECIAL DESIGN: With dimensions of 21” X 6.1” X 7.3” (540 X 158 X 187mm), this winch fits a variety of off-road vehicles and offers an effective solution for diverse recovery situations. Its new black exterior design not only adds a modern and hardcore style to your vehicle, but is also functional and aesthetically pleasing. Built for those who value both utility and aesthetics, this winch blends seamlessly with your vehicle’s look, helping you stand out on any terrain.
- Manufactured in China.Fit Type: Vehicle Specific
- Easy to use
- Highly durable
- Always remove any element or obstacle that may interfere with safe operation of the pulling tool
- No load line speed: 13.8 fpm
- Special designed for atv, utv, car, boat, trucks, jeeps, modified vehicles and multi purpose utility trailers
- Powerful – 2000-lb. rated line pull powered by a 1.0 (12-volt) DC motor
- Pull-and-turn freespooling clutch; Gearing- 1-Stage Planetary,Low-amp, permanent magnet motor; Gear Ratio- 153:1
- Hassle-Free –The roller fairlead creates a safe and smooth pull with the dependable 50-foot galvanized super-duty aircraft cable which is able to withstand abrasive terrain without fraying
- Please read the instruction carefully. The winch can cause short circuits if wiring is wrong. If you have any problems, please feel free to consult with us
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-536 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Rosenbauer America Submission Date : JUL 31, 2023 NHTSA Recall No. : 23V-536 Manufacturer Recall No. : Warn Recall 22E101 Manufacturer Information : Manufacturer Name : Rosenbauer
America Address : 5190 260th street Wyoming MN 55092 Company phone : 6514621000 Population : Number of potentially involved : 13 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2020-2022 Commercial F-550 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : Power Train : NR Descriptive Information : After investigating field reports of inadvertent activation, Warn determined that getting the remote control wet could result in water ingress which leads to corrosion inside the remote control. This condition could lead to inadvertent activation. It was determined that this condition only affects remote controls with wireless capability that are not water proof. The population includes all Rosenbauer
Fire Trucks with the recalled WARN VR EVO winches with wireless/corded remote. Production Dates : DEC 01, 2020 – JUN 30, 2022 VIN Range 1 : Begin : 1FD0W5HN8NEC00366 End : 1FD0X5HT5MED49490 ✔ Not sequential Vehicle 2 : 2022-2022 Commercial M2-106 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : Power Train : NR Descriptive Information : After investigating field reports of inadvertent activation, Warn determined that getting the remote control wet could result in water ingress which leads to corrosion inside the remote control. This condition could lead to inadvertent activation. It was determined that this condition only affects remote controls with wireless capability that are not water proof. The population includes all Rosenbauer
Fire Trucks with the recalled WARN VR EVO winches with wireless/corded remote. Production Dates : DEC 01, 2020 – JUN 30, 2022 VIN Range 1 : Begin : 3ALACYFE0NDNL6012 End : 3ALDCYFE8PDNM9736 ✔ Not sequential Part 573 Safety Recall Report 23V-536 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 3 : 2022-2022 Commercial M2-112 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : Power Train : NR Descriptive Information : After investigating field reports of inadvertent activation, Warn determined that getting the remote control wet could result in water ingress which leads to corrosion inside the remote control. This condition could lead to inadvertent activation. It was determined that this condition only affects remote controls with wireless capability that are not water proof. The population includes all Rosenbauer
Fire Trucks with the recalled WARN VR EVO winches with wireless/corded remote. Production Dates : DEC 01, 2020 – JUN 30, 2022 VIN Range 1 : Begin : 1FD0W5HN8NEC00366 End : 54F3GECX1MWM12982 ✔ Not sequential Vehicle 4 : 2022-2022 Commercial 567 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : Power Train : NR Descriptive Information : After investigating field reports of inadvertent activation, Warn determined that getting the remote control wet could result in water ingress which leads to corrosion inside the remote control. This condition could lead to inadvertent activation. It was determined that this condition only affects remote controls with wireless capability that are not water proof. The population includes all Rosenbauer
Fire Trucks with the recalled WARN VR EVO winches with wireless/corded remote. Production Dates : DEC 01, 2020 – JUN 30, 2022 VIN Range 1 : Begin : 1NPCHJ8X7PD805017 End : 1NPCHJ8X7PD805017 Not sequential Vehicle 5 : 2021-2021 Rosenbauer
Commander Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : Power Train : NR Descriptive Information : After investigating field reports of inadvertent activation, Warn determined that getting the remote control wet could result in water ingress which leads to corrosion inside the remote control. This condition could lead to inadvertent activation. It was determined that this condition only affects remote controls with wireless capability that are not water proof. The population includes all Rosenbauer
Fire Trucks with the recalled WARN VR EVO winches with wireless/corded remote. Production Dates : DEC 01, 2020 – JUN 30, 2022 VIN Range 1 : Begin : 54F2FBCTXMWM12957 End : 54F3GECX1MWM12982 ✔ Not sequential Part 573 Safety Recall Report 23V-536 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 6 : 2021-2021 Rosenbauer
Avenger Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : Power Train : NR Descriptive Information : After investigating field reports of inadvertent activation, Warn determined that getting the remote control wet could result in water ingress which leads to corrosion inside the remote control. This condition could lead to inadvertent activation. It was determined that this condition only affects remote controls with wireless capability that are not water proof. The population includes all Rosenbauer
Fire Trucks with the recalled WARN VR EVO winches with wireless/corded remote Production Dates : DEC 01, 2020 – JUN 30, 2022 VIN Range 1 : Begin : 54F2FCAT1MWM13052 End : 54F2FCAT1MWM13052 Not sequential Description of Defect : Description of the Defect : Ingress of water into handheld remote control for the winch may result in corrosion on the circuit board. Water and/or corrosion on specific locations on the circuit board, may cause the winch to start operating when not intended. Or it may turn off when switch button is released. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : There is a safety risk of personal injury if the winch operates unexpectedly. No injuries have been reported to Warn or Rosenbauer
associated with any product failures. No significant property damage other than the winch system, winch mounting brackets, and front bumpers have been reported as a result of the corrosion related issues. Description of the Cause : NR Identification of Any Warning that can Occur : The vehicle driver or winch operator may hear the winch motor running when not intended. Involved Components : Component Name 1 : Winch Remote Component Description : WARM VR EVO winches with wireless/corded remote Component Part Number : 103250 Part 573 Safety Recall Report 23V-536 Page 4 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 2 : Winch Remote Component Description : WARM VR EVO winches with wireless/corded remote Component Part Number : 103251 Component Name 3 : Winch Remote Component Description : WARM VR EVO winches with wireless/corded remote Component Part Number : 103252 Component Name 4 : Winch Remote Component Description : WARM VR EVO winches with wireless/corded remote Component Part Number : 103253 Component Name 5 : Winch Remote Component Description : WARM VR EVO winches with wireless/corded remote Component Part Number : 103254 Component Name 6 : Winch Remote Component Description : WARM VR EVO winches with wireless/corded remote Component Part Number : 102355 Component Name 7 : Winch Remote Component Description : WARM VR EVO winches with wireless/corded remote Component Part Number : 104218 Supplier Identification : Component Manufacturer Name : WARN Industries, Inc. Address : 12900 SE Capps Road Clackamas Oregon 97015 Part 573 Safety Recall Report 23V-536 Page 5 The information contained in this report was submitted pursuant to 49 CFR §573 Country : United States Chronology : 3/13/2023: NHTSA contacted Rosenbauer
to verify that we would submit a recall. Warn identified Rosenbauer
as a buyer of the recalled winches but Rosenbauer
was experiencing problems with their email server at that time and did not receive the email. 3/30/2023: NHTSA contacted Rosenbauer
again to verify but our email was still down. At this time nor before March 2023, we did not receive any notification from Warn either. 7/24/2023: NHTSA contacted Rosenbauer
for an update and the email was received. 7/25/2023: Rosenbauer
contacted Warn for PO information. 7/26/2023: Warn sent the list of recall winches with Rosenbauer
’s PO number. 7/28/2023: Rosenbauer
finalized the list by tying the recalled winches to a VIN. 7/31/2023: Recall was filed. Description of Remedy : Description of Remedy Program : Rosenbauer
will notify customers of the hazard including instructions for inspecting for corrosion and disabling the wireless function to significantly mitigate the hazard. Then they will be directed to fill out a claim form on Warn’s website: https://www.warn.com/vr-evo-remote-info. This link will cover identification of impacted remotes, battery removal instructions, and the claim filing form. Some processes will need to be solidified with Warn for Rosenbauer
’s owner notification letters. Warn will offer owners a $100 coupon as compensation for the lack of wireless function. Warn will also offer a new corded-only remote (no wireless function) to replace any remote that shows evidence of corrosion, unexpected operation of the winch, or for remotes that have been submerged or exposed to water. How Remedy Component Differs from Recalled Component : Per Warn: Removing the battery pack
from the current remote control disables the wireless function controlling the winch, significantly mitigating the hazard. The remote remains fully usable in the corded configuration when physically plugged into the winch. Unplugging the remote from the winch when not in use eliminates the hazard. The new corded-only remote that will be used in reworked existing unsold inventory, will have a new switch face that is visually different from the current remote. It will not have wireless control functions, including wireless indicator light and mode switch. The internal circuit board will be fully conformal coated and use sealed switches. Warn is designing a new wireless/corded handheld remote is being designed for all new production winches. It is unknown if these will be Part 573 Safety Recall Report 23V-536 Page 6 The information contained in this report was submitted pursuant to 49 CFR §573 available for replacement on these winches or for purchase. Identify How/When Recall Condition was Corrected in Production : All trucks impacted by this recall were delivered by the time Rosenbauer
was notified. There was no need to remedy anything in production at our plants. Recall Schedule : Description of Recall Schedule : Rosenbauer
will comply with the notification requirements after confirming the process with Warn in the next few weeks. Planned Dealer Notification Date : AUG 29, 2023 – SEP 29, 2023 Planned Owner Notification Date : AUG 29, 2023 – SEP 29, 2023 * NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.