โThis site contains affiliate links for which OEMDTC may be compensatedโ |
August 4, 2023 NHTSA CAMPAIGN NUMBER: 23V552000
A broken steering arm and tie rod can separate and fall to the ground, increasing the risk of a crash.
NHTSA Campaign Number: 23V552
Manufacturer Nelson Trailers
Components STEERING
Potential Number of Units Affected 1
Summary
Nelson Trailers (Nelson) is recalling one 2018 CBC-40ST trailer equipped with a Dexter Smart-Steer Axle with a bolt-on steering arm. The steering arm may break during certain conditions, such as low speed and high side-loading.
Remedy
The affected trailer has been repaired, free of charge. Owners may contact Nelson customer service at 1-419-523-5321.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
Notified by recall letter from Dexter Axle October 17, 2022
22E080 – Steering Arm May Fracture – Dexter
Axle Smart-Steer 2.0 Self-Steering Axles
22E080 – Steering Arm May Fracture – Dexter Axle Smart-Steer 2.0 Self-Steering Axles
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
NELSON | CBC-40ST | 2018 |
2 Associated Documents
Recall Acknowledgement
RCAK-23V552-5631.pdf 645.295KB
Defect Notice 573 Report
RCLRPT-23V552-2311.PDF 212.696KB
Latest Recalls Documents
- MULTI PROCESS: Experience the convenience of a high-quality, budget-friendly 3-in-1 welding machine that masterfully handles Gasless Flux Core MIG/Stick/Lift TIG(additional 10-25 lift TIG torch required: B08BXGGNFL). This unit caters to a wide range of welding applications and meets your various welding needs.
- WELDING CAPACITY: With a robust 135 Amp output, this welder is capable of tackling mild steel workpieces up to 2/5โ thick. It is compatible with 2LB .030โโ and .035โโ welding wire. For Stick Welding, the Hot Start and Arc Force can be adjusted to enhance your welding experience.
- SYNERGIC CONTROL: The wire feeding speed is flexibly adjustable (030": 120-420 in/min;.035'': 120-308 in/min). When adjusting the wire feeding speed, the voltage will be automatically matched to a recommended value, and you can fine tune the voltage between -3V~3V. Ideal for both beginners and seasoned professionals.
- DIGITAL DISPLAY: The advanced digital display revolutionizes the welding interface, offering enhanced clarity and operational efficiency. Monitor the real-time current during welding for precise control.
- LIGHT&PORTABLE: Weighing just 11.4 lbs, this lightweight and compact welder is a breeze to transport, making it the perfect companion for on-the-go welding projects with its carrying handle.
- 3-IN-1 welder: The MIG145 MIG welder has multi-function for Gas/Gasless MIG, Lift TIG and Stick. Maximum current is 145 amps, supporting gasless flux-cored mig wire and solid mig wire, and can use 0.030"/0.035"/0.040" flux core wire size, 0.030" solid wire size. The flux core welder excels in welding stainless steel, carbon steel, and even thicker steel, meeting diverse welding needs.
- Digital Screen Display: We design this MIG welding machine with full new technology. MIG welder 110v/220v with LED digital screen display voltage, current, and other parameters. You do not need to remove the helmet to assess the equipment status. You can make real-time adjustments, enhancing efficiency and accuracy.
- Synergic Control: The 3 in 1 welder adopts IGBT and integrated wire feed technology to automatically match the recommended voltage and wire feed speed (current). At the same time, the user can also press the adjustment knob to individually adjusted the voltageยฑ3V, making it accessible to both beginners and professionals.
- 110/220V Dual-Voltage: The gasless mig welder supports 110/220V dual voltage, automatically identifying the input voltage, and clearly display through the front panel indicator. This design enables the MIG welder to work seamlessly in different power environments, providing greater convenience and applicability.
- Portable & Powerful: The MIG welder weighs just 13.7 pounds, MIG torch is 8.2 ft long (Included torch head and internal wire feed length) and comes with a shoulder strap for easy carrying and outdoor use. Package includes 1รMIG145 MIG welder machine, 1รMIG torch, 1รEarth clamp, 1รStick holder, 1ร0.040" Flux cored wire, 1ร0.030" Solid wire, 1ร0.030"/0.035"/0.040" Contact tip, 1ร0.030"/0.035" Wire feed rollers, 1ร2 meters gas hose, 1ร220V to 110V Wire adapter, 1รShoulder strap, 1ร User manual.
- ใPowerful 3-in-1 Welding Machineใ BESTMIG FLUX-135 offers robust output with a true current of 135A, capable of welding materials up to 1/8 inch thick. Enjoy versatile functionality with MIG, Lift TIG, and Stick welding capabilities for various applications.
- ใComprehensive Accessory Kit Includedใ Unlike many competitors, our welder comes fully equipped with essential accessories: ground clamp, electrode holder, and welding gun. Additionally, we include a user-friendly Auto-Darkening welding helmet (convertible to goggles) and high-quality leather gloves for maximum safety and convenience.
- ใDesigned for Beginnersใ MIG FLUX-135 is perfect for novice welders, featuring an all-in-one digital technology that automatically adjusts parameters based on your current settings. Easy setup allows you to start welding right awayโsimply load the wire spool, connect the gun, plug in, and you're ready to go without complicated gas setups.
- ใVersatile Applications Across Materialsใ Compatible with gasless flux-cored MIG wire from 0.030โ to 0.040โ, the BESTMIG welder is suitable for stainless steel, carbon steel, and thicker metal projects. Ideal for both beginners and experienced users in home workshops, DIY projects, or factory settings.
- ใReliability & Versatilityใ BESTMIG welder features cutting-edge digital control technology with an intuitive interface for precise operation. Its full-color LED display allows real-time monitoring of welding parameters, while integrated wire feeding technology automatically adjusts voltage and feed speed, enhancing performance and reducing spatter for cleaner welds.
- WELD ANYWHERE: Plug in the Weld-Pak 90i MIG wire feed welder anywhere 120V input power is available; It's designed to use with flux-cored welding wire (1/4โ max thickness) or solid MIG wire (3/16" max thickness)
- ACCESSORIES INCLUDED: The machine comes with a full list of accessories including a welding gun, nozzle, contact tip, work cable and clamp; Metal case provides protection from the elements
- LIGHT & PORTABLE: Ideal for maintenance and mobile welders, thanks to its small and lightweight (15 lbs) inverter design and shoulder strap for portability; A good choice for professionals but itโs an easy to use welder for beginners too
- SMOOTH & EASY OPERATION: Has simple control with two knobs for wire speed and voltage; Inverter power source makes it more efficient to operate and provides smoother weld characteristics compared to traditional welders
- PERFECT FOR SMALL WELD JOBS: This machine is best for DIY projects, hobbyists, home repairs and more; Infinite welding voltage allows fine-tuning of weld characteristics
- POWERFUL 6-IN-1 MIG WELDER: The multi-process welding machine that included Gas/Solid Wire MIG(GMAW), Gasless Flux Core MIG(FCAW), Stick/MMA, Spot welding, Lift TIG, spool gun connector optional (tig gun and spool gun not included). Suitable for all kinds of welding requirements .023โ/.030โ/.035โ solid wire, .023โ/.030โ/.035โ flux core wire, .035โ/.045โ aluminum wire. ๏ผ.023โ, .045โ rollers need to buy separately)
- SYNERGIC MIG: Digital control and automatically match the recommend current and wire feeding speed when selecting the diameter of welding wire and gas material, also you can adjust the welding current according to your welding habit. Easy to work with beginners or professional welders. Cooling fan that runs only when it's needed so no constant buzzing sounds.
- MULTI-FUNCTIONAL WELDER: The MIG welder features some special functions that included adaptive crater, burn-back adjustment and pre-flow/post-flow, which improve your welding efficiency. 2T/4T 2 welding way meets your needs. Store 10 preset settings: can set 10 groups of parameter data for each welding mode, itโs more convenient to start the next welding job.
- REVOLUTIONARY LARGE LED DISPLAY: Exclusive human-computer Interaction LED screen design, provides you with accurate data display and makes you read easier and more clear without taking off your helmet. Easy to carry with a handle or shoulder strap(included), perfect for outdoor maintenance, farm, road equipment, and home DIY.
- HIGH QUALITY: Every single of our welder machines passed various authoritative Laboratory tests in simulating extremely harsh environments before leaving our ARCCAPTAIN factory that conforms to the high standards. We take care of our customerโs safety based on VRD, over current/over voltage/over current/over-load/overheating protection function. [NOTE: DO NOT power on until the screen turns off and the fan stops]
- 6 in 1 Welding Machine: The multi-function welding machine included Gas/Solid Wire MIG, Gasless Flux Core MIG, Stick/MMA, Spot welding, Lift TIG, spool gun compatible (tig gun and spool gun not included,WP-17V-35,LBT150).
- MIG Synergic Control: When you selecting wire diameter and gas material,the welder will automatically match recommended current and wire feed speed.So, itโs very easy for beginners.Also, if you are experienced welder, you can adjust the welding current according to your personal welding habit.
- Can Weld Aluminum:This Multi MIG welder can weld various of metals,It can not only weld stainless steel,alloy steel,iron but also can weld aluminum.It has two ways to weld aluminum, to install the teflon wire feed tube or use spool gun.
- Wide Application:Various Welding Wire Suitable,suitable for all kinds of welding requirements .023โ/.030โ/.035โ solid wire, .023โ/.030โ/.035โ flux core wire,.035โ/.040โ/.045โ aluminum wire.
- Powerful And Safe Machine:This 250A Welding machine can weld mild up to 14.0mm plate,equipped with overload / over-voltage/over-current/overheating system,feel free to use,itโs very safe.
- ๐ ๐ข๐ง ๐ ๐๐๐ฅ๐๐ข๐ง๐ ๐๐๐๐ก๐ข๐ง๐: The MIGVAN M-140 MIG welder is suitable for three welding modes: gasless flux-cored MIG, Lift TIG and stick. With a maximum output current of 140 amps, it can be used with .030"/.035"/.039" flux core wire. It can weld stainless steel, carbon steel, and even thicker steel perfectly, which can easily deal with the use scenarios such as machinery repair, yard repair, home repair, and DIY metal crafts.
- ๐๐จ๐ซ๐ ๐๐ญ๐๐๐ฅ๐ ๐๐ง๐ ๐๐ฎ๐ซ๐๐๐ฅ๐: The main board of this welding machine is designed with an 8-layer structure and equipped with high-performance electronic components. The insulating resin covering the surface layer achieves perfect performance in insulation, moisture-proof, dust-proof, and line shielding so that you can get a more stable performance as well as a more durable use experience in the process of soldering.
- ๐๐๐ซ๐ ๐ ๐๐๐ ๐๐ข๐ ๐ข๐ญ๐๐ฅ ๐๐ข๐ฌ๐ฉ๐ฅ๐๐ฒ: The gasless MIG welder is equipped with a 3.54-inch LED digital display, which has higher brightness, wider viewing angle, longer service life, and lower power consumption than ordinary LCD digital displays. You can easily assess the status of the machine even in the sun or without removing the welding helmet.
- ๐๐ฒ๐ง๐๐ซ๐ ๐ข๐ ๐๐จ๐ง๐ญ๐ซ๐จ๐ฅ: The flux core welding machine adopts the latest synergistic control technology, which can intelligently match the recommended voltage and wire feeding speed by selecting the wire diameter and welding current. With the V-Adj mode of the PARM button, the voltage can be adjusted in the range of +3V or -3V for better welding performance.
- ๐๐๐๐๐ญ๐ฒ ๐ ๐ข๐ซ๐ฌ๐ญ: Safety protection is our greatest concern, we through the structural design of the motherboard, the specifications of the electronic components to choose and rigorous testing, so that it has a better performance in overheating protection, overcurrent protection, overvoltage protection, and overload protection performance so that the user can be safer to use it.
- ใEASY TO USEใ: The welding machine has included with voltage control knob,wire speed adjustment knob and with synergic control, automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses. Even beginners can use it easily.
- ใPOWERFUL AND SAGE WELDER MACHINEใ: This 130A Welding machine can weld mild up to 3.0mm plate,equipped with overload and overheating system,feel free to use,itโs very safe.Big enough to handle 2.2 pound rolls of wire.
- ใPORTABLE DESIGNใ: Lightweight and compact design, with a comfortable hand grip that makes it easy to carry wherever you want; It only weighs 8.6 lbs., so you can effortlessly take it as far as you can.
- ใWIDE APPLICATIONSใ: It can be used with a wide variety of metals and alloys. Suitable for home users, DIY craft enthusiasts, beginners and small projects.
- ใPACKAGE INCLUDESใ: 130 MIG welding machine; Mig torch; Ground clamp; Brush&Hammer; 1lb .030" flux cored welding wire; Contact Tip*2.
- ใUPGRADED 2 IN 1 MULTIPROCESS WELDERใThe AWT welding machine 110v offers 2 processes: Flux Core/gasless MIG and MMA/Stick to meet your different requirements. Our MIG welder perfect for DIY projects, home repairs, farm work, automotive applications and construction sites.
- ใSYNERGIC CONTROL & EASE OF USEใTake advantage of synergic control, mig welder automatically optimize welding parameters based on wire diameter(.030"/.035" flux). You can also use the manual MIG to adjust the current according to your usage habits. The best choice for beginners or professional welder.
- ใSAFE & POWERFUL MACHINEใUp to 140A output current and 110v voltage, flux core welding machine can weld up to 5/32"(4.0mm) mild steel. Stick welding process can handle E6013 electrode. To ensure Max safety during operation, mig welder is equipped with VRD, over-current overload and overheating protection system. Metal case provides protection from the elements.
- ใPORTABLE & WIDE APPLICATIONใThanks to its compact and lightweight (9 lbs) design, make welding machine more portable that can be carried anywhere with a handle or shoulder strap. Ideal for maintenance and mobile welders. Welding fence, automotive exhaust pipe, metal crafts and more.
- ใSupport & Assistanceใ: You can get 2 years of coverage and 24-hour customer support. If you have any questions about the MIG welder, please feel comfortable reaching out to us. We will do our utmost to assist you.
- 3 IN 1 Multi Welder: There are 3 welding modes: Flux Core Gasless MIG/ MMA/LIFT TIG, meeting your different requirements.It can be used with a wide variety of metals and alloys.Suitable for home users, DIY craft enthusiasts, outdoor repairs, rusty metal, farm work.
- Powerful And Safe Machine:This 140A Welding machine can weld mild up to 4.0mm plate.Suitable for .030โ & .035โ &0.040" flux core welding wire.Big enough to handle 2.2 pounds rolls of wire.Also equipped with overload and overheating system,feel free to use,itโs very safe.
- MIG Synergic Or Manul Control:The welding voltage and wire feed speed will be automatically matched after selected diameter of the welding wire.Even beginners can use it easily.If you are experienced welder, you can also use manual MIG, adjust the voltage and current according to your welding habits.
- Portable Design:It is lightweight and compact design, with a comfortable hand grip that makes it easy to carry wherever you want. It only weighs 9 lb, so you can effortlessly take it as far as you can.
- Package Includes:The accessories are very complete, when you get the package,you can weld right away.140 MIG welder; MIG torch; Electrode holder;Ground clamp; Brush;0.5kg 0.8mm flux cored wire;10 contacts tips,2 nozzles.
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-552 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Nelson Trailers Submission Date : AUG 04, 2023 NHTSA Recall No. : 23V-552 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Nelson Trailers Address : 6448 Rt 224 Ottawa OH 45875 Company phone : 419-523-5321 Population : Number of potentially involved : 1 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2018-2018 Nelson CBC-40ST Vehicle Type : TRAILERS Body Style : OTHER Power Train : NR Descriptive Information : Received recall letter 22E-080 for a deffective component on an axle. We only used (1) axle that was affected by this recall. The trailer that it was installed on was identified. Production Dates : MAY 18, 2018 – MAY 18, 2018 VIN Range 1 : Begin : 1n9G62A44J1012142 End : 1N9G62A44J1012142 Not sequential Description of Defect : Description of the Defect : Dexter Smart Steer Axle with bolt on steer arm may fracture at low speed during high stress as described in Dexter
recall 22E-080 FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : The fractured steer am and attached tie rod may fail and fll to the ground causing a risk for separation. There is no loss of control of the unit when this failure occurs. Description of the Cause : Axle manufacturer recall Identification of Any Warning that can Occur : Independent castering of the steer axle and noise from dragging parts. Involved Components : Part 573 Safety Recall Report 23V-552 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 Component Name 1 : Dexter
Axle Component Description : Dexter
Smart Steer Axle Component Part Number : 702887 Supplier Identification : Component Manufacturer Name : Dexter
Axle Company Address : 2900 Industrial Parkway East Elkhart Indiana 46516 Country : United States Chronology : Notified by recall letter from Dexter
Axle October 17, 2022 Description of Remedy : Description of Remedy Program : Only affects (1) unit. Nelson records axle serial numbers and was able to immediately identify the subject trailer. How Remedy Component Differs from Recalled Component : Trailer axle is repaired per Dexter
Safety bulletin SB015 Identify How/When Recall Condition was Corrected in Production : Nelson only ever received 1 axle subject to this recall. Recall Schedule : Description of Recall Schedule : Customer has already been notified and the repairs per SP015 have been completed. Planned Dealer Notification Date : AUG 04, 2023 – AUG 04, 2023 Planned Owner Notification Date : AUG 04, 2023 – AUG 04, 2023 * NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.