NHTSA Campaign Number: 18E055
Manufacturer Industrias Martinrea de Mexico SA de CV
Components SERVICE BRAKES, HYDRAULIC
Potential Number of Units Affected 3,931
Brake Hose Corrosion May Cause Brake Fluid Leak
A brake fluid
leak can reduce brake effectiveness, increasing the risk of a crash.
Summary
Industrias Martinrea de Mexico SA de CV (Martinrea) has submitted a Defect Information Report based upon decisions made by Chrysler (FCA US LLC) and Ford Motor Company to conduct recalls (numbers 18V277 and 18V389 respectively). The brake circuit hose assemblies located between the master cylinder and the hydraulic control unit, may have been manufactured without anti-corrosion plating on the coupling fittings, or “ferrules,” of the hoses. This can lead to premature corrosion, and result in a brake fluid leak.
Remedy
Martinrea is working with the affected vehicle manufacturers. Dealers for those manufacturers will replace the brake hoses, free of charge. Chrysler owners may contact Chrysler customer service at 1-800-853-1403. Chrysler’s number for this recall is U41. Ford owners may contact Ford customer service at 1-866-436-7332. Ford’s number for this recall is 18S19.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Recall Acknowledgement
August 14, 2018
- Mixes well with conventional fluids
- Low-moisture formula provides excellent vapor lock protection
- Ideal for hydraulic and disc brakes
- Ideal for hydraulic and disc brakes
- Mixes well with conventional fluids
- Low-moisture formula provides excellent vapor lock protection
- Provides an extra margin of safety in extreme braking conditions (packaging may vary)
- Mix of polyglycol ethers ensures hot brake-system operation will not create dangerous vapor
- Excellent for ABS, disc and drum brake systems
- Delivers braking power when needed by avoiding a spongy pedal
- Both wet and dry boiling points exceed the minimum government standards
- Exceeds DOT 3 regulations: Formulated to meet or surpass DOT 3 requirements, ensuring consistent braking performance and dependable stopping power in all conditions
- Premium high boiling point: Helps prevent vapor lock and brake fade under extreme heat, maintaining safe and reliable braking even in demanding situations
- Full synthetic formula: Provides superior resistance to moisture absorption and corrosion, helping protect vital brake system components for long-lasting performance
- Superior protection and performance: Designed to deliver reliable braking under extreme temperatures while supporting the safety and efficiency of the braking system
- Recommended applications: Suitable for ABS, disc, and drum brake systems; surpasses SAE J1703, FMVSS 116, and ISO 4925 DOT 3 specifications
- High quality blend of polyethylene glycol ethers and additives
- Compatible with all brake system rubber components and other brake fluids
- Prevents seal hardening or softening
- Protects against rust and corrosion
- Provides excellent lubricity
This product presentation was made with AAWP plugin.