SRAN 611 – Rear Brakes May Require Extended Distance to Stop – 2020 Triumph Rocket 3 TFC, 2020-2024 Rocket 3 R, Rocket 3 GT, 2022 Rocket 3 GT Triple Black, & Rocket 3 R Black Motorcycles

SEOCONTENT-START

Safety Recall Action Notice SB611 Issue 1 1 of 7 Safety Recall Action Notice SB611 Issue 1 – 11.2023 Subject: Rear Brake Master Cylinder and Caliper Spacer Bulletin Number Models Affected VIN Range Markets Affected 611 Rocket 3 GT Triple Black From VIN 971477 To VIN BR6550 All Markets Rocket 3 R Black Rocket 3 GT Rocket 3 R Rocket 3 TFC Background Information Dealers are requested to remove and install a new rear brake master cylinder and rear spacer as described in the procedure below. Customer Contact Instructions NOTICE STOP DELIVERY OF AFFECTED MOTORCYCLES IMMEDIATELY. DO NOT deliver a motorcycle affected by this Safety Recall Action Notice to a customer until you have completed, or confirmed completion of, the procedures described in this Safety Recall Action Notice. Delivering a motorcycle subject to an outstanding Safety Recall Action Notice may contravene local or national laws in your market, territory or country. Triumph subsidiaries and distributors must instigate a Safety Recall Action in their country in accordance with the national recall code of practice. For vehicles in dealer stock, the safety recall MUST be actioned before delivery to the customer. Dealers are to prioritise repair of customer owned motorcycles before any unsold motorcycles. Identification of Affected Motorcycles Rocket 3 motorcycles as described in the table above. NOTICE Some affected motorcycles listed in the VIN range will have been modified and repaired by Triumph prior to their release from the factory. Unmodified motorcycles can be identified by checking the ‘VIN Enquiry’ on www.triumphonline.net. Safety Recall Action Notice SB611 2 of 7 Warranty Claim Instructions Bulletin Number Fault Code Repair Code Description Repair Time Allowance 611 020270911 99611 Replace the rear brake master cylinder and caliper spacer 0.5 Hrs Genuine Parts Information Bulletin Number Part Number Description Quantity 611 T2025112 Rear Brake Master Cylinder Kit Consisting of: Rear Brake Master Cylinder – Qty 1 Rear Brake Caliper Spacer – Qty 1 Sealing Washers – Qty 5 1 Parts Ordering Instructions For Triumph Subsidiary and Overseas Distributor dealers using Triumph Warranty On-Line with Parts Auto Ordering Flag switched on: Order all repair parts by submitting a New Prior through the Warranty On- Line system. Entering the above repair code in a New Prior will automatically add the parts required and labour times for this Safety Recall Action Notice. For Overseas Distributor dealers NOT using Triumph Warranty On-Line or for Overseas Distributor dealers using Triumph Warranty On-Line with Parts Auto Ordering Flag switched off: Orders should be placed using the normal parts ordering procedure. Genuine Parts Return Dealer to retain parts for 90 days. All parts must be stored in a secure, non-public accessed area and correctly identified with a completed warranty label. Thereafter the parts must be rendered unusable prior to scrapping. Other Instructions Once completed, please mark the Service Record Book that the requirements of this Safety Recall Action Notice have been complied with. Before returning the motorcycle to the customer, download the latest calibration to the engine electronic control module, chassis electronic control module (if fitted), keyless electronic control module (if fitted) and instruments (if applicable) using the current version of the Triumph diagnostic software. Safety Recall Action Notice SB611 3 of 7 Rear Brake Master Cylinder and Caliper Spacer – Renew WARNING Make sure the motorcycle is stabilised and adequately supported. Do not support the motorcycle on any ancillary component, the exhaust system or any other non structural parts of the motorcycle frame. A correctly supported motorcycle will help prevent it from falling. An unstable motorcycle may fall resulting in motorcycle damage, serious injury or death. NOTICE To prevent paint damage, do not spill brake fluid onto any area of the bodywork. Close the brake reservoir and wash any spilled brake fluid immediately with warm soapy water. Spilled brake fluid, if left, will damage painted and plastic surfaces. Perform the following operations: Remove the following components as described in the Service Manual; • Rear Wheel Rear Brake Caliper WARNING Do not allow a brake component to hang unsupported on the brake hose or line. Brake hoses or lines that are not supported may become damaged or bent. Bent or damaged brake hoses or lines lead to reduced braking efficiency that may lead to loss of motorcycle control which could result in serious injury or death. 1. Remove the caliper mounting bolts and slide the caliper off the brake disc. B00473_1 1 1. Caliper mounting bolts WARNING Make sure no damage is made to the brake pad material when moving the brake pads. Allowing the brake pads to come into contact with each other or sharp objects may cause the material to crack or break. Damage to the brake pads may result in reduced braking efficiency leading to loss of motorcycle control and an accident. Safety Recall Action Notice SB611 4 of 7 2. Support the rear brake caliper such that the weight of the caliper is off the brake hose. 3. Using a suitable flat metal plate approximately 2 mm thick and 30 to 50 mm wide (for example a gasket scraper) between the brake pads, pump the rear brake pedal until the plate is held by the brake pads. NOTICE The brake caliper is to remain detached from its mounting until the new rear brake master cylinder is fitted and the rear brake master cylinder back bleed procedure is completed. Rear Brake Master Cylinder NOTICE The master cylinder back bleed is to be used when a brake master cylinder or ABS modulator has been removed from the braking system and then refitted or replaced. 1. Remove the rear brake master cylinder as described in the Service Manual. Retain the rear brake master cylinder as described in the Genuine Parts Return instructions. 2. Fit the new rear brake master cylinder as described in the Service Manual. Do not bleed the rear brake system at this stage. 3. Remove the rear brake reservoir cap as described in the Service Manual/Braking System Maintenance and Safety/Bleeding the Rear Brake. 4. Being careful not to damage the brake pad material, use the metal plate against the brake pads to push the caliper pistons in evenly. 5. Push the pistons into the caliper. 6. Top up the brake fluid in the reservoir to the MAX level. 7. Thoroughly clean the threaded fixing holes for the brake caliper fixings. 8. Thoroughly clean the threaded part of the fixings and smear the first four threads with a proprietary copper based grease. 9. Position the caliper over the disc. 10. Secure the brake caliper with the fixings and tighten sufficiently to bring the caliper into contact with its mounting points, while allowing a small amount of lateral movement. Do not fully tighten at this stage. Safety Recall Action Notice SB611 5 of 7 Rear Brake Caliper Spacer NOTICE To prevent paint damage, do not spill brake fluid onto any area of the bodywork. Close the brake reservoir and wash any spilled brake fluid immediately with warm soapy water. Spilled brake fluid, if left, will damage painted and plastic surfaces. NOTICE Note the bleed screw is fitted to the rear brake hose union. Note the orientation of the rear brake hose at the caliper for installation. 1. Disconnect the brake hose at the caliper and place the free end of the hose in a suitable container to collect the brake fluid. 2. Collect the anti-rotation spacer and discard the three sealing washers. B00476 1 3 4 2 1. Brake hose union 2. Sealing washers 3. Brake hose 4. Anti-rotation spacer 3. Retain the anti-rotation spacer as described in the Genuine Parts Return instructions. Safety Recall Action Notice SB611 6 of 7 4. With the new spacer and the rear brake hose positioned as noted during removal, connect the brake hose to the caliper incorporating new sealing washers on each side of the hose connection and the spacer, do not fully tighten at this stage. B00476_1 1 3 4 2 1. Brake hose union 2. New sealing washers 3. Brake hose 4. New spacer 5. If fitted, remove the rubber cap from the caliper bleed screw. 6. Make sure the orientation of the brake hose is as noted during removal. 7. Use service tool T3880885 to position the rear brake line. Make sure that: • the slot in the service tool fits over the rear brake hose. • the lug on the service tool is positioned against the lug on the caliper. clhs 1 1 5 4 2 2 3 1. T3880885 – Brake Line Fixture 2. Brake hose 3. Brake hose union 4. Lug on the caliper 5. Lug on the service tool 8. Tighten the brake hose union to 25 Nm. 9. Remove service tool T3880885. 10. Attach a transparent tube to the bleed screw. Safety Recall Action Notice SB611 7 of 7 11. Place the other end of the tube in a suitable container containing new brake fluid. B00445_1 2 1 1. Bleed screw 2. Bleed tube Note: • The bleed screw should only be opened by a small angle, just enough to allow system pressure to drop. When pressing the brake lever or pushing the caliper pistons in, some resistance should be felt indicating that the screw is not opened too much. • When bleeding the rear caliper, make sure the bleed nipple is uppermost. 12. With the aid of an assistant, bleed the rear brake caliper as described in the Service Manual/Brakes/ Braking System Maintenance and Safety/Rear Brake Caliper Bleed procedure. 13. With the bleed screw closed, pump the brake pedal to correctly position the caliper pistons. 14. Tighten the rear caliper bolts to 45 Nm. Road Test WARNING When riding the motorcycle the rider must always wear a safety helmet, eye protection, gloves, boots, trousers (close fitting around the knee and ankle) and a brightly coloured jacket. Brightly coloured clothing will considerably increase a rider’s visibility to other operators of road vehicles. Although full protection is not possible, wearing correct protective clothing can reduce the risk of serious injury or death when riding. 1. Carry out a road test. When applying the brakes observe the following: • The brakes should have a firm, responsive feel. • The brakes should act smoothly and silently without judder. • Upon activation of the brakes, the motorcycle should come to rest without deviating from a straight line. 2. If required, rectify any faults discovered after the brake test.

**************************************************************************************************************

11/3/23, 11:59 AM TriumphOnline | Notice https://www.triumphonline.net/TriumphOnline/COmAdmin/MyNoticePreview.aspx?params=Xb4HIa/IWxUgz9q7ndZjYgh9RFSt8IQJWHIpKjFq/5s= 1/3 SAFETY RECALL ACTION NOTICE 611 – ROCKET 3 Notice Information Ref 25516 Posted Date: Posted To: General Manager / Business Owner, Technician, Parts / Accessories Coordinator, Sales Executive, Clothing Sales, Sales Manager,Aftersales Manager, Service Leader / Advisor, Accounts / Admin,Marketing Executive Subject: Service/Technical TOL NOTICE (US&CA) – November 2, 2023 TOL Ref. #25516-SVC SAFETY RECALL ACTION NOTICE 611 – ROCKET 3 Triumph Motorcycles has initiated a voluntary safety recall affecting a specific VIN range of the below-referenced model. We require your immediate attention to rectify the below machines. Full details are specified in SRAN661 document. Affected Models WHAT IS THE PROBLEM? A small number of motorcycles within the affected VIN range have been parked or stored for long periods of time may demonstrate noticeably increased rear brake pedal travel than that previously experienced prior to storage. In the event of an affected motorcycle being stored, the rear brake pedal must be depressed over a greater distance than prior to storage before the brake engages. A small number of motorcycles that are used regularly may also demonstrate smaller increases in 11/3/23, 11:59 AM TriumphOnline | Notice https://www.triumphonline.net/TriumphOnline/COmAdmin/MyNoticePreview.aspx?params=Xb4HIa/IWxUgz9q7ndZjYgh9RFSt8IQJWHIpKjFq/5s= 2/3 brake pedal travel. Once engaged, rear brake performance is unaffected. Note: Front brakes are not affected and will remain fully functional. On unrepaired affected motorcycles, where pre-ride safety checks have not been completed, this increased pedal travel can increase the risk of a crash. WHAT WILL TRIUMPH DO? To address this condition, Triumph is launching a new recall as described in the above Safety Recall Action Notice. All arrangements for updating of our computer systems have been completed. Notification letters to current customers will be mailed on or shortly after November 15 th , 2023explaining the action and advising them to return their bike to a Triumph dealer to have the modification carried out free of charge. The bulletin states that the Rear Brake master cylinder needs to be replaced for the affected VINS. Each dealer will receive the necessary service tool, T3880885 – Brake line fixture, to carry out therepair. WHAT SHOULD DEALERS DO? All affected motorcycles are to be repaired in accordance with the above Safety Recall Action Notice available on TriumphOnline.net (TOL) and attached. It is imperative that any owner who has purchased an affected machine be contacted immediately and asked to return the machine for modification. Triumph Dealers should take the following actions: 1. Quarantine all unsold motorcycle stock (including motorcycle stock for sale on your website and with 3rd parties) and make arrangements to repair as per the above Safety Recall Action Notice prior to any further deliveries to customers. 2. Owners of machines outside of the affected VIN range are not connected with this action and may therefore require reassurance. 3. Using your own records please contact affected customers to arrange repairs at the earliest convenient opportunity. 4. This action is likely to increase visitor traffic to your showroom and service areas. Please ensure all arrangements are made to best accommodate them. FEDERAL LAW PROHIBITS THE DELIVERY OF A RECALLED MOTORCYCLE UNDER ASALE OR LEASE UNTIL THE REMEDY HAS BEEN PERFORMED. 11/3/23, 11:59 AM TriumphOnline | Notice https://www.triumphonline.net/TriumphOnline/COmAdmin/MyNoticePreview.aspx?params=Xb4HIa/IWxUgz9q7ndZjYgh9RFSt8IQJWHIpKjFq/5s= 3/3 If you have any additional questions, please contact Triumph Customer Support at (888) 284-6288.

**************************************************************************************************************

OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-730 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Triumph Motorcycles America, Ltd. Submission Date : OCT 31, 2023 NHTSA Recall No. : 23V-730 Manufacturer Recall No. : SRAN 611 Manufacturer Information : Manufacturer Name : Triumph Motorcycles America, Ltd. Address : 100 Hartsfield Centre Parkway Suite 200 Atlanta GA 30354 Company phone : 678-854-2010 Population : Number of potentially involved : 3,557 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2022-2022 Triumph Rocket 3 GT Triple Black Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : The recall population was based upon a review of factory records. Production Dates : JAN 04, 2021 – FEB 26, 2021 VIN Range 1 : Begin : SMTG10JX2NTAE9438 End : SMTG10JX3NTAG3591 Not sequential Vehicle 2 : 2022-2022 Triumph Rocket 3 R Black Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : The recall population was based upon a review of factory records. Production Dates : FEB 09, 2021 – APR 06, 2021 VIN Range 1 : Begin : SMTG11JX3NTAF9417 End : SMTG11JX7NTAH5586 Not sequential Vehicle 3 : 2020-2024 Triumph Rocket 3 R Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : The recall population was based upon a review of factory records. Production Dates : OCT 10, 2019 – AUG 31, 2023 VIN Range 1 : Begin : SMTG11JX3LT978848 End : SMTG11JX9RTBR2306 Not sequential Part 573 Safety Recall Report 23V-730 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 4 : 2020-2024 Triumph Rocket 3 GT Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : The recall population was based upon a review of factory records. Production Dates : OCT 14, 2019 – AUG 25, 2023 VIN Range 1 : Begin : SMTG10JX6LT979471 End : SMTG10JX6RTBR1673 Not sequential Vehicle 5 : 2020-2020 Triumph Rocket 3 TFC Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : The recall population was based upon a review of factory records. Production Dates : OCT 16, 2019 – DEC 15, 2019 VIN Range 1 : Begin : SMTG12JX4LT978640 End : SMTG12JX2LT989099 Not sequential Description of Defect : Description of the Defect : A small number of motorcycles within the affected VIN range that have been parked or stored for long periods of time may demonstrate noticeably increased rear brake pedal travel than that previously experienced prior to storage. In the event of an affected motorcycle being stored, the rear brake pedal must be depressed over a greater distance than prior to storage before the brake engages. A small number of motorcycles that are used regularly may also demonstrate smaller increases in brake pedal travel. Once engaged, rear brake performance is unaffected. Front brakes are not affected and will remain fully functional. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : If this condition remains undetected and pre-ride safety checks are not carried out by the rider as recommended by Triumph, a rider who relies soley on the rear brake may experience extended stopping distances, thereby increasing the risk of a crash. Description of the Cause : The OEM 12.7mm rear brake master cylinder (Triumph part number T2021988) as originally fitted to the Triumph Rocket 3 family motorcycles from VIN 971477 is unable to move sufficient fluid consistently over a set distance, once micro air (that is naturally present and dissolved in all brake fluid) coalesces over time into bubbles. Bubbles reduce fluid movement over the complete brake line. Incidence of air bubbles will present the symptom of a gradually increasing rear brake pedal travel. Increased pedal travel will not occur over a single journey but will take several weeks or months to manifest. Part 573 Safety Recall Report 23V-730 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 The remedy 14.0mm rear brake master cylinder (2025444) overcomes this symptom. The larger diameter master cylinder displaces a higher volume of brake fluid, thereby overcoming the influence of any air bubbles that may have formed in the brake line. Identification of Any Warning that can Occur : Recommended daily pre-ride safety checks, as included in the Owner Handbook supplied with all new motorcycles, will warn the rider of any increase in rear brake pedal travel. Riders of average experience and competence will become aware that the rear brake pedal travel has increased prior to feeling the brake engage. Involved Components : Component Name 1 : Rear Brake Master Cylinder Component Description : ASSY, M/CYL, REAR, INTEGRATED Component Part Number : T2021988 Supplier Identification : Component Manufacturer Name : Hitachi Astemo Barcelona (NIS) Address : C/ Ciencia 33 5-A Parc D’Activitats Viladecans Foreign States 08840 Country : Spain Chronology : Mar 2023 – In service reports received to date evaluated and commencement of investigations. Jun 2023 – Investigations and testing of customer and test bikes underway to identfy root cause of extended brake pedal travel. Total number of warranty claims received between Mar23 and Oct23 is 85. There have been no reports of Accidents, Injuries or Fatalities. Oct 2023 – Conclusion of investigation and meeting of Recall Committee. Part 573 Safety Recall Report 23V-730 Page 4 The information contained in this report was submitted pursuant to 49 CFR §573 Description of Remedy : Description of Remedy Program : Replace the Rear Brake master Cylinder, free of charge including parts and labor. Owners who had the recall performed on their motorcycle, may be eligible for reimbursement. Owner are required to contact Triumph Motorcycles at 1-888-284-6288 for more information, including eligibility requirements. How Remedy Component Differs from Recalled Component : The remedy brake master cylinder (Triumph part number 2025444) has a larger diameter of 14.0mm as compared to the OEM part of 12.7mm. Identify How/When Recall Condition was Corrected in Production : This campaign affects all VINs of the specified models. Production of affected models will recommence in November 2023. Future models will be fitted with the remedy part 2025444. Recall Schedule : Description of Recall Schedule : The planned notification dates are an estimate and may be revised. Planned Dealer Notification Date : NOV 01, 2023 – NOV 01, 2023 Planned Owner Notification Date : NOV 15, 2023 – NOV 15, 2023 * NR – Not Reported

**************************************************************************************************************

Triumph Motorcycles America Ltd. 100 Hartsfield Centre Parkway Suite 200 Atlanta, Georgia 30354 17 November 2023 REAR BRAKE MASTER CYLINDER REPLACEMENT Safety Recall: SRAN611 NHTSA Recall: 23V730 This notice applies to your motorcycle: VIN: SMTXXXX Model: (2020) Rocket 3 TFC (2020 – 2024) Rocket 3 GT & Rocket 3 R (2022) Rocket 3 GT Triple Black & Rocket 3 R Black Dear [NAME]: This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Triumph Motorcycles Ltd. has decided that a defect which relates to motor vehicle safety exists in your motorcycle, with the VIN shown above. Triumph is conducting a voluntary safety recall to address the condition. The reason for this recall notice: Motorcycles within the affected VIN range that have been parked or stored for long periods of time may demonstrate noticeably increased rear brake pedal travel than that previously experienced prior to storage. In the event of an affected motorcycle being stored, the rear brake pedal must be depressed over a greater distance than prior to storage before the brake engages. Some motorcycles that are used regularly may also demonstrate smaller increases in brake pedal travel. Once engaged, rear brake performance is unaffected. Note: Front brakes are not affected and will remain fully functional. On unrepaired affected motorcycles, where pre-ride safety checks have not been completed, this increased pedal travel can increase the risk of a crash. Recommended daily pre-ride safety checks will warn the rider of any increase in brake pedal travel. Once repaired (as per NHTSA Recall 23V730, further issues will be prevented by adhering to the Triumph recommended service schedule and pre-ride safety check. See table below. What Triumph Motorcycles Ltd & your dealer will do: Triumph Motorcycles Ltd has authorized your dealer to replace the Rear Brake master Cylinder, free of charge to you including parts and labor. This repair should take around 30 minutes. However, depending upon the dealer’s work schedule, it may be necessary to make your motorcycle available for a longer period. First Service Annual Service 600 Mile (1,000 Km) 10,000 Mile (16,000 Km) 20,000 Mile (32,000 Km) 30,000 Mile (48,000 Km) or 6 Months Service Service Service Brake system – check operation • • • • • • Brake pads – check wear levels • • • • • • Brake fluid levels – check • • • • • • Brake fluid – renew Brakes Every 2 years, regardless of mileage Operation Description Odometer Reading in Miles (km) or Time Period, whichever comes first Mileage Based Service Daily Year ! IMPORTANT SAFETY RECALL ! What you must do to ensure your safety: Please make an appointment with your authorized Triumph dealer to have this important remedy performed on your motorcycle as soon as possible. To find your nearest dealer, please visit https://www.triumphmotorcycles.com/dealers/dealer-search. Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within 10 days. If you need help: Please contact your authorized Triumph dealer should you have any questions or encounter any difficulty regarding this recall. In the event your dealer is unable to remedy your motorcycle, please contact Triumph Motorcycles America at 1-678-854-2010. If you previously paid to have this recall performed on your motorcycle, you may be eligible for reimbursement. Please contact Triumph Motorcycles at 1-678-854-2010 for more information, including eligibility requirements. If an authorized Triumph dealer or Triumph Motorcycle America Ltd, fails or is unable to perform this remedy without charge within a reasonable amount of time, you may contact the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE., Washington, D.C., 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov. If you no longer own the motorcycle listed above, please contact Triumph at 1-678-854-2010 and provide any information you can furnish that will assist us in locating the new owner. We apologise for any inconvenience this may cause you. However, we have taken this course of action in the best interest of your safety and your continued satisfaction with your Triumph motorcycle. We appreciate your attention and cooperation in this important matter. Sincerely, Triumph Motorcycles America Ltd.

**************************************************************************************************************

• • TOL NOTICE (USCA) – November 9. 2023 TOL Ref. #XXXXX-SVC PARTS AVAILABILITY UPDATE: SAFETY RECALL ACTION NOTICE 611 – ROCKET 3 As stated in TOL #25576. Triumph Motorcycles has initiated a voluntary safety recall affecting a specific VIN range of the below-referenced model. Affected Models SAFETY RECALL ACTION NOTICE 611 REAR BRAKE MASTER CYLINDER REPLACEMENT MODEL CODE YA1 YBl YJl YKl YU MODEL ROCKET 3 GT TRIPLE BLACK ROCKET 3 R BLACK ROCKET3GT ROCKET3R ROCKET3TFC VIN RANGE; 971477 to BR655Q (All Markets) Key updates to this recall are as follows: MODEL YEAR 2022 2022 2020- 2024 2020 – 2024 2020 Parts are in inventory at our warehouse and began shipping to dealers on Monday, November 6th Tool for the recall arrived to our warehouse on November 7th . and began shipping on November 8th FEDERAL LAW PROHIBITS THE DELIVERY OF A RECALLED MOTORCYCLE UNDER A SALE OR LEASE UNTIL THE REMEDY HAS BEEN PERFORMED. If you have any additional questions. please contact Triumph Customer Support at (888) 284-6288. TRIUMPH MOTORCYCLES AMERICA 100 HARTSFIELD CENTRE PARKWAY. SUITE 200 ATLANTA. GEORGIA. 30354 TE L: (678) 854-2010 FAX: (678) 854-2025 TRIUMPHMOTORCYCLES.COM TRIUMPH MOTORCYCLES AMERICA 100 HARTSFIELD CENTRE PARKWAY. SUITE 200 ATLANTA. GEORGIA. 30354 TE L: (678) 854-2010 FAX: (678) 854-2025 TRIUMPHMOTORCYCLES.COM

**************************************************************************************************************

**************************************************************************************************************

**************************************************************************************************************

SEOCONTENT-END