23E091 – Lift Threshold Warning Lights Insufficient – Ricon Threshold Warning System Kits (TWS)

November 22, 2023 NHTSA CAMPAIGN NUMBER: 23E091000

Lift Threshold Warning Lights Insufficient

Beacons that do not provide proper illumination may be less visible to wheelchair lift users, increasing the risk of injury.

 

NHTSA Campaign Number: 23E091

Manufacturer Ricon Corporation

Components EQUIPMENT ADAPTIVE/MOBILITY

Potential Number of Units Affected 5,321

 

Summary

Ricon Corporation (Ricon) is recalling certain Threshold Warning System Kits (TWS) with part number RI32885, designed for use with Ricon Baylift and Mirage Series wheelchair lifts. The red beacon lighting on the TWS may not be bright enough. As such, these kits fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 403, “Platform Lift Systems.”

 

Remedy

Ricon will replace the TWS kits, free of charge. The manufacturer has not yet provided a schedule for recall notification. Owners may contact Ricon customer service at 1-800-322-2884.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


November 22, 2023
Manufacturer: Ricon
Product: Threshold Warning System Kit PN RI32885

Chronology of Defect / Noncompliance Determination

Provide the chronology of events leading up to the defect decision or test data for the noncompliance decision.:

In late August 2023, Ricon was notified by one of its OEM customers that an analysis of the Threshold Warning Kit used in one of its platform lift models suggested that the beacon used in the kit did not meet the 20 candela minimum requirement provided in FMVSS 403, S6.1.4.  After receiving this information, Ricon contacted the supplier of the lighting beacon to investigate the concern.  Ricon also contacted the third-party conducting the analysis of the Threshold Warning Kit on behalf of the OEM to understand its testing process and methodologies.  The beacon supplier informed Ricon that the beacon is rated to “2 mean spherical candle power”.  Following receipt of this information, in September – early October 2023, Ricon investigated further to understand whether any revisions or changes to the specifications of the beacon had occurred since in December 2022, the same third-party facility used by the OEM had provided Ricon with a compliance analysis indicating that the same beacon used in the same Threshold Warning Kit exceeded the candela requirements.

In light of these conflicting results, between mid to late October, Ricon conducted additional analysis of the candela values of the beacon.  Samples of the beacon were taken from Ricon’s facilities and were also provided to the lighting supplier and to the third-party facility for their separate assessments of the candela values.  The lighting supplier’s report was provided in late October 2023, but did not provide a light intensity measurement in candelas as needed.  In early November 2023, Ricon again requested information from the third-party conducting the original compliance assessment on its testing procedures and methodologies as well as to explain why the beacon evaluated in the December 2022 test report indicated it met the light intensity requirements.  In this time frame, Ricon’s investigation also found that the lamps it had sourced for use in the beacon had been certified to meet FMVSS 108 and designed for use in heavy vehicle applications which further suggested to Ricon there was likely an issue with the process by which the beacon was evaluated instead of with the beacon itself.

Additional analysis of the beacon by the supplier, Ricon and the third-party continued into mid-November with each indicating inconsistent light intensity results.  Despite these inconsistent results, on November 17, 2023, Ricon determined that the beacon contained in the threshold warning signal system does not meet the light intensity requirements of FMVSS 403, S6.1.4.  Ricon is not aware of any reports of injury potentially related to this issue.

 


1 Affected Product

Equipment

BRANDPART NO.PRODUCTION DATES
THRESHOLD WARNING KITRI32885

 


3 Associated Documents

Recall Acknowledgement

RCAK-23E091-7429.pdf 646.725KB

 


Miscellaneous Document – Chronology

RMISC-23E091-5454.pdf 123.693KB

 


Noncompliance Notice 573 Report

RCLRPT-23E091-7901.PDF 225.081KB

 


Latest Recalls Documents

For the Latest and Most recent Recall Information Visit the link below…

 


 

Bestseller No. 1
LLIKED Suffocation Warning Labels 2' x 1', 1000 Labels per Roll
62 Reviews
LLIKED Suffocation Warning Labels 2" x 1", 1000 Labels per Roll
  • Dimension: 1000 Labels (1 Roll), 2 X 1 inch rectangular suffocation warning labels.
  • High Quality: The large clear black bold font is easy to read and highly visible. Safety labels are printed without fade, smear, or bleed and is scratch proof.
  • For Safety: Use these for caution against child suffocating hazards. Apply the labels to poly bag, shrink wrap, mailers, and other set of loose items in clear bags to warn consumers and handling small children safety.
  • Professional: Meets shipment requirements for shipping items in clear bags while keeping children safe from potential suffocation.
  • Ease of Use: Bend edge of the label and peel off the warning label. Strong adhesion will stick to various surfaces, not easy to fall off.
Bestseller No. 2
Black 1000 PCS Candle Warning Labels Candle Safety Sticker 1.5 Inch
  • Size: 1.5 inches, with strong viscosity, suitable for most candles, candle containers, candle jars, etc.
  • Quantity: black 2 rolls of candle warning labels, 500 per roll.
  • Material: These self-adhesive candle stickers are covered with a plastic protective film, which is waterproof and oil-proof.
  • Easy to use: just tear off the self-adhesive candle safety label and stick it on any clean, It is easy to stick and easy to use.
  • Satisfaction Guarantee: If for any reason our Candle Warning Labels do not meet your needs, please contact.
Bestseller No. 3
10 Rolls/5000 Labels,Suffocation Warning,Keep Away from Small Children,2" X 2" Removable Label Stickers
  • 5000 Labels (10 Rolls of 500),2" X 2" Stickers
  • Suffocation Warning Labels,´Keep Away from Small Children´
  • Note:This is removable labels
  • For Safety: Use these for caution against child suffocating hazards, a great safety solution for poly bags and Legally required in several US states to warn caregivers about the hazards poly film poses to children
Bestseller No. 4
2 Rolls/1000 Labels,Suffocation Warning,Keep Away from Small Children,2" X 2" Removable Label Stickers
  • 1000 Labels (2 Rolls of 500),2" X 2" Stickers
  • Suffocation Warning Labels,´Keep Away from Small Children´
  • NOTE:THIS IS REMOVABLE LABELS
  • FOR SAFETY: Use these for caution against child suffocating hazards, a great safety solution for poly bags and Legally required in several US states to warn caregivers about the hazards poly film poses to children
Bestseller No. 5
Choking Warning Labels 1.5" Red Small Parts Choking Hazard Stickers
  • Generous Quantity for Business Needs: Each roll has 500 round choking warning stickers, each 1.5 inches in diameter. This quantity fits the needs of businesses that ship or package small items. The 1.5-inch size is just right for sticking on various packaging types, not too big to clutter and not too small to go unnoticed
  • Bold Red Design for Maximum Visibility: These stickers sport a simple, eye-catching red design that's hard to miss, no matter where you stick them. They're printed with the exact text: "WARNING, Choking Hazard, Small Parts not for children under 3 yrs"-matching the wording recommended for packaging requirements. This bold look makes the warning clear, even at a quick glance
  • Reliable Sticker Quality: Made with dependable material, the stickers have strong adhesion-they stick well to smooth surfaces like polyester bags, boxes, bubble wrap, and heat shrink wrap. The printed warning text stays sharp and readable, so the message doesn't fade or blur, even during shipping or storage
  • Easy to Use: You don't need any extra tools to apply these stickers. Just peel them off the roll and stick them onto clean, smooth parts of your packaging. Whether you're prepping shipments in bulk or labeling individual boxes, the quick peel-and-stick process saves time and keeps things simple
  • Versatile Application for Multiple Packaging Types: These stickers work well on polyester bags, boxes, bubble wrap, and heat shrink wrap. They're suitable for shipping and packaging, effectively warning about choking risks for those under 3 years old. They help keep packaging compliant and messages clear for recipients

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...