“This site contains affiliate links for which OEMDTC may be compensated” |
February 21, 2024 NHTSA CAMPAIGN NUMBER: 24V127000
Bumper May Partially Obstruct Rear Lights/FMVSS108
Partially obstructed rear lights can reduce the vehicle’s visibility to other drivers, increasing the risk of a crash.
NHTSA Campaign Number: 24V127000
Manufacturer Pierce Manufacturing
Components STRUCTURE, EXTERIOR LIGHTING
Potential Number of Units Affected 4
Summary
Pierce Manufacturing (Pierce
) is recalling certain 2020 Enforcer, 2021-2022 Velocity, and 2023 Saber vehicles equipped with a specific rear bumper option. The bumper may partially obstruct the rear lights. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, “Lamps, Reflective Devices, and Associated Equipment.”
Remedy
Pierce will reposition the lights, free of charge. The manufacturer has not yet provided a schedule for recall notification. Owners may contact Pierce
customer service at 1-888-974-3723. Pierce
’s number for this recall is 74B333.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
December 21, 2023 – Pierce is notified that some trucks equipped with a specific rear bumper option may have lamps installed on the rear of the trucks which are in positions that are not fully visible.
January 2024 – Pierce begins to investigate trucks which were built with this same rear bumper option to better understand the customer allegation. As part of its investigation, Pierce
identified a subset of those vehicles that have rearward facing lamps that would not cast light at the required 45-degree angle inwards to the truck.
February 2024 – Based off its research and effectivity dates for the 45 degree inboard / outboard requirement, Pierce concludes that a non-compliance exists and files a recall to correct the affected trucks which are in the field.
Pierce is not aware of any warranty claims, customer complaints, or incidents that may be related to this issue .
4 Affected Products
Vehicles
2 Associated Documents
Recall Acknowledgement
RCAK-24V127-1932.pdf 645.977KB
Noncompliance Notice 573 Report
RCLRPT-24V127-8200.PDF 214.19KB
Latest Recalls Documents
For the Latest and Most recent Recall Information Visit the link below…
- Compatible With: 2009-2018 Dodge
Ram
1500, 2010-2018 Dodge
Ram
2500, 2010-2018 Dodge
Ram
3500, 2019-2020 Dodge
Ram
1500 Classic.
- Does Not Fit: Not Compatible with 2013-2021 models with Factory LED Tail Lights.
- Package Include: 1× Right Passenger Side Tail Light.(With Light Bulb)
- Easy Installation: Direct plug and play. No Installation Guide or Instruction Included, it is recommended to find installation video or professional installation.
- Customer Support: Boine's taillights provide perfect after-sales service. If you encounter any problems during use, please contact us.
- [Fit] - 89-96 Ford
F150/Bronco, 89-98 F250/F350; Compatible w/ Styleside Only
- Meets or Exceeds DOT & SAE Standards
- Direct OEM Replacement No Modification Needed
- New Aftermarket Part, Includes Both Driver & Passenger Side
- 30-Days Money Back Guarantee & 90 Days Limited Warranty
- Compatibility: The taillight assemblies are compatible with 1999-2006 Chevy Silverado 1500/2500;2001-2006 Chevy Silverado 1500HD/2500HD/3500;2007 Chevy Silverado Classic;1999-2002 GMC
Sierra 1500/2500;2001-2002 GMC
Sierra 1500HD/2500HD/3500. Does NOT fit Z71, barn door/ sidestep models. Pickup truck not included. Please confirm the vehicle fitment before ordering.
- Durability: The high-impact housing withstands shock and vibration. With fully sealed silicon prevents environmental damages including freezing, foggy, fading, corrosion, and provides reliable service in sorts of weather conditions such as rain, snow, or dust storms, enabling your car looks better and drive safer.
- DOT Compliance and safe Driving: To ensure driving safety for you and the oncoming driving circumstance, our 1999-2007 Chevy Silverado 1999-2002 GMC
Sierra taillight are DOT & SAE compliant. Taillight will upgrade your lighting, making your vehicle easier to see for other drivers and passengers.
- Simple Installation: Plug-and-play operation, OE taillight socket and replacement for the stock taillight, easily for installation without any drilling or modification. (NOTE: Professional installation would be highly recommended)
- Package Includes: 1 pair of taillight (driver side and passenger side).Bulbs are not included.
- Fits: 03-19 Chevy Express GMC
Savana & Chevy Express Van 1500/2500/3500; Does NOT Fit: One bulb tailight version
- Meets or Exceeds DOT & SAE Standards
- Direct OEM Replacement No Modification Needed
- New Aftermarket Part, Includes Both Driver & Passenger Side
- Lights Dim Over Time, Replace In Pairs: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind
- Verify fitment: Navigate to the Amazon Confirmed Fit tool at the top of the page (desktop) or under the images (mobile). Plug in your vehicle info and check the bulb fitment location to ensure this product will work for your needs
- Easy To Replace: Sylvania Long Life miniature bulbs are easy to install and show instant results
- Low Maintenance And High Durability: Designed for durability, greater safety, and lower maintenance by the leading supplier of automotive lighting
- Longer Life Than Most Standard Bulbs: Long Life bulbs perform twice as long as any other standard miniature bulbs
- Compatible with:2004 2005 2006 2007 2008 2009 2010 2011 2012 chevy colorado,2004 2005 2006 2007 2008 2009 2010 2011 2012 gmc
canyon,2006 i 280 i 350 Isuzu
,2007 i 290 Isuzu
,2007 2008 i 370 Isuzu
- Replace part number:Left driver sidebrake tail light:gm2800164,19417444, 20825943,right passenger side brake tail light:gm2801164,19417443,20825942.L:16602131i,R:16602130r
- Premium quality:The colorado taillights are carefully designed and manufactured by us,using high quality materials for durability
- Multiple tests:Oklpf tail light undergoes temperature,humidity,dust,salt spray and water testing to make your everyday driving safer
- Easy to install:Oklpf tail lights installation process is simple and convenient.It's direct plug and play saving you valuable time and effort
- 💡 OEM Direct Fitment - Compatible for 2018 2019 2020 2021 2022 honda
accord. Designed to be an exact replacement for your factory Tail lamps with no vehicle modifications required for getting the job done right.
- 💡 LED Tail lights with Dynamic Animation - Scanning dynamic animation comes to life when you lock or unlock the vehicle. A breathing light and choreographed sequence of light in motion greets you upon your arrival or bids you farewell.
- 💡 Turn Signal with Switchback - Full LED, NO bulbs needed. The lights have a row of amber LED which can set up to run as switchback signal. Led rear lamps with switchback is designed to fully upgrade your car. Ultra-modern fiber optic style to give a touch of high-end elegance to the appearance of your vehicle making it stand out from the rest.
- 💡 NOTE- There is a waterproof pad on the back of tail lights, please seal the waterproof pad and make sure there is no gaps to prevent moisture when install the tail lights. When meet any issue of product, please message us and provide the product label, video& pictures proof, make sure the pictures& video clearly shows the defect.
- (Set of 2) Important Notice: This type bulbs are for brake lights use, please check OEM bulb's part number to confirm it is 7440 or 7443 before purchasing. Strobe Function: 7443 Strobe led lights bulbs will flash 3 times on-and-off and then keep solid light (Legal blinking times) to avoidthe rear-end collision.
- Due to LED bulbs draw less power than stock incandescent lamps, extra LED resistors maybe required to avoid the flickering or error code. LED Chips: Each 7443 LED strobe bulb is equipped with 39 pieces high quality,high power and high performance 2835 led chips; 360° full angle illumination light ouput with projector lens.
- Universal fits T20 wedge 7440 single filament and 7443 dual filament W3x16Q base, big difference between high and low intensity light output, replacing rear 7440 7443 brake stop light, center high-mount stop ( 3rd brake ) lights lamps,etc.
- The length is about 2.09 inch. Cross reference number: 7440, 7441, 7443, 7443LL, W21/5W, 7443/26201, 78660, 78661, 17919, 7515, HIB7443WM, W21W, 7440/26200, 17632, 7504, 7440LL, 7443-SRCK, 7443-CK,etc.
- Newly upgraded version, built-in USA-made smart IC driver for the best light performance and longer lifespan. USA located, Fully One Year Warranty. Compatible with both standard type and CK/SRCK type. Voltage: 12V - 24VDC.
- Package Includes: (Pack of 2) 912/921 led bulb reverse light, 6W per bulb, 12-16V Wide voltage, 500Ma current, bulb size 1.57in(L)*0.59in(W)*0.35in(H), net weight: 6g/pc
- 300% Brighter: Each 921 led bulb has 15 pieces high power 2835-SMD LEDs, 3 times brighter than original reverse light bulbs. 6000k white color light brings your car a refreshed new look
- CANBUS Error Free: Built-in intelligent IC driver for better performance. Energy-saving, low temperature, long lasting. Comparable size with stock 921 bulbs, easy to install
- Suit for Socket: T15, 912, 921, 906, 904, 902, 922, W16W, just plug and play without modification. ONLY used for backup reverse lights daytime running light
- Note: Amazon filter system may not be 100% accurate, the bulb size may vary between trim of your vehicle. Please double check owners manual or original bulb size to confirm
- Compatible with:2003 2004 2005 2006 chevy silverado 1500 1500hd,2003 2004 2005 2006 chevy silverado 2500 2500hd,2004 2005 2006 chevy silverado 3500,2007 chevy silverado 1500 2500 3600 classic
- Replace part number:Gm277 B100L,gm277 B100R 19169004 19169005,gm2800174,gm2801174
- Not compatible with: 2003 chevy silverado 3500 hd and stepside beds model.Do not fit barn door or stepside models only fits fleetside models.please confirm the vehicle fitment before ordering
- Multiple tests:Oklpf tail light undergoes temperature,humidity,dust,salt spray and water testing to make your everyday driving safer
- Easy to install:Oklpf tail lights installation process is simple and convenient.It's direct plug and play saving you valuable time and effort
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-127
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Pierce Manufacturing FEB 21, 2024 NHTSA Recall No. : 24V-127 Manufacturer Recall No. : 74B333 Manufacturer Information :
Manufacturer Name : Pierce Manufacturing Address : 2600 American Drive
P.O. BOX 2017 Appleton WI 54912-2017
Company phone : 920-832-3000
Population :
Number of potentially involved : 4
Estimated percentage with defect : 100 %
Vehicle Information : Vehicle 1 : 2020-2023 Pierce Velocity, Enforcer, Saber Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : ALL Power Train : DIESEL
Descriptive Information : In certain Pierce fire trucks with a specific rear bumper option, the placement of rearward facing lamps do not comply with some of the the luminous intensity requirements of 49 CFR 571.108 , S6.4.3 (b).
Production Dates : MAY 11, 2023 – NOV 01, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Description of Noncompliance : Description of the Noncompliance : Certain trucks, equipped with a specific rear bumper option were built with rearward facing lamps (brake, turn signal, reverse) that do not meet the luminous intensity requirements of 49CFR 571.108, S6.4.3(b). The lamps are positioned such that when they are activated, the light which they cast will not be visible in a 45-degree inboard direction. FMVSS 1 : 108 – Lamps, reflective devices, and assoc. Equipment FMVSS 2 : NR
Description of the Safety Risk : If the required lamps installed on the rear of the truck do not display at the
required 45 degree inboard direction, a vehicle following behind the truck may not have sufficient visibility of the lamps to be able to ascertain the intention of the truck, as commanded by the truck operator (braking, turning, backing up). This may increase the risk of a crash.
Description of the Cause : NR Identification of Any Warning
that can Occur : None. Part 573 Safety Recall Report 24V-127 Page 2 Involved Components : Component Name 1 : Lamp
Component Description : Lamp(s) installed on the rear of a truck. Component Part Number : NR Supplier Identification : Component Manufacturer
Name : NR Address : NR
NR
Country : NR Chronology :
December 21, 2023 – Pierce is notified that some trucks equipped with a specific rear bumper option may have lamps installed on the rear of the trucks which are in positions that are not fully visible.
January 2024 – Pierce begins to investigate trucks which were built with this same rear bumper option to better understand the customer allegation. As part of its investigation, Pierce
identified a subset of those vehicles that have rearward facing lamps that would not cast light at the required 45-degree angle inwards to the truck.
February 2024 – Based off its research and effectivity dates for the 45 degree inboard / outboard requirement, Pierce concludes that a non-compliance exists and files a recall to correct the affected trucks which are in the field. Pierce
is not aware of any warranty claims, customer complaints, or incidents that may be related to this issue . Description of Remedy :
Description of Remedy Program : Pierce will, at no charge to the customer, reposition the affected lamps to
relocate them to positions where they meet the visibility requirements at the required inboard angle. How Remedy Component Differs from Recalled Component : Once the remedy is performed, the rearward facing lamps will be repositioned so that they comply with the luminous intensity requirement at a 45-degree inboard angle for both sides of the truck. The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-127
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Identify How/When Recall Condition was Corrected in Production :
Pierce instituted changes in its ordering process where trucks ordered with this specific rear bumper configuration can only have compliant rear- facing lamp options selected. Recall Schedule :
Description of Recall Schedule : Notifications to customers will be made via a customer letter. The 577
customer letter will be mailed pending NHTSA approval. Any claims for pre-notification remedy reimbursement should be directed to Pierce for review.
Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NR – NR
* NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
Last update on 2025-04-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.